*2013/12/16 15:36:37.76 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2011/06/19 13:00:32.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 35 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 183DD847 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.215714 36.03083 2 Temperature 'deg C (ITS90)' 8.192833 10.32244 3 Salinity:T0:C0 PSS-78 31.53637 32.40807 4 Number_of_bin_records n/a 4 13 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2011-37\Pro $END *ADMINISTRATION MISSION : 2011-37 AGENCY : PBS, Salmon and Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : Viking Storm *LOCATION GEOGRAPHIC AREA : WCVI / BC Inlets STATION : EP01 EVENT NUMBER : 61 LATITUDE : 49 20.45000 N ! (deg min) LONGITUDE : 126 32.84000 W ! (deg min) WATER DEPTH : 46 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 4076 $REMARKS SOFTWARE VERSION 1.59 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2012/02/06 16:37:47 846 846 MERGEHDR 1.1 2012/02/06 17:12:43 846 846 SHIFTDAT 3.4 2012/02/07 10:08:06 846 846 CALIB 11.7 2012/02/07 14:04:58 846 846 DELETE 6.3 2012/02/07 14:15:37 846 278 CLIP 1.3 2012/02/07 14:17:31 278 241 CTDEDIT 4.61 2012/02/07 14:22:35 241 227 BINAVE 4.1.1 2012/02/09 15:26:05 227 35 REMOVECH 8.1.1 2012/02/09 16:24:37 35 35 HDREDIT2 2.5.1 2012/02/09 16:46:41 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:36:37 35 35 $END $REMARKS -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -1.80 Salinity was recalculated after shift -CALIB parameters: 2012/02/07 14:04:58 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.1800000E+01 0.1000000E+01 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 26.29 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -CTDEDIT 2012/02/07 14:22:35 14 records were deleted in this editing session. 26 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2012/02/09 16:24:37 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Flag -HEADER EDITS: 2012/02/09 16:46:41 Applied edit header: P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-HDR-SBE19.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 3: Salinity:Practical:T0:C0 [PSS-78] Name: Salinity:T0:C0 ==> Salinity:Practical:T0:C0 $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\HighSeaSalmon\Desktop\HS201137\CTD DATA\E P01-061.hex Software Version 1.59 Temperature SN = 4076 Conductivity SN = 4076 System UpLoad Time = Jun 19 2011 19:30:43 HS201137 F/V VIKING STORM EP01 ds SeacatPlus V 1.1a SERIAL NO. 4076 20 Jun 2011 02:23:17 vbatt = 12.3, vlith = 8.3, ioper = 62.6 ma, ipump = 47.3 ma, status = not logging number of scans to average = 1 samples = 18227, free = 744373, casts = 9 mode = profile, minimum cond freq = 3137, pump delay = 40 sec ignore magnetic switch = no battery type = ALKALINE, battery cutoff = 7.5 volts pressure sensor = strain gauge, range = 1450.0 SBE 38 = no, Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = n o output format = raw HEX S> SeacatPlus V 1.1a SERIAL NO. 4076 20 Jun 2011 02:23:26 temperature: 27-mar-10 TA0 = 1.259230e-03 TA1 = 2.589226e-04 TA2 = 4.147257e-07 TA3 = 1.392599e-07 TOFFSET = 0.000000e+00 conductivity: 27-mar-10 G = -1.048555e+00 H = 1.515496e-01 I = -4.256497e-04 J = 5.350216e-05 CF0 = 2.637008e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 613, range = 1450 psia: 25-mar-10 PA0 = 6.334072e-01 PA1 = 4.423796e-03 PA2 = -1.693695e-11 PTCA0 = 5.212516e+05 PTCA1 = 1.141998e+01 PTCA2 = -2.199784e-01 PTCB0 = 2.486088e+01 PTCB1 = -6.250001e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -5.700636e+01 PTEMPA1 = 5.248906e+01 PTEMPA2 = -3.786838e-02 POFFSET = 0.000000e+00 volt 0: offset = -4.811000e-02, slope = 1.249733e+00 volt 1: offset = -4.786667e-02, slope = 1.249396e+00 volt 2: offset = -4.786667e-02, slope = 1.251271e+00 volt 3: offset = -4.782667e-02, slope = 1.249709e+00 EXTFREQSF = 1.000114e+00 dh cast 2 19 Jun 2011 13:00:32 samples 649 to 1494, avg = 1, stop = mag switch S> # nquan = 7 # nvalues = 846 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity, Practical [PSU] # name 6 = flag: flag # span 0 = 1, 846 # span 1 = -2.015, 34.493 # span 2 = 8.1760, 12.8920 # span 3 = 0.011970, 3.529672 # span 4 = -2.011, 1.881 # span 5 = 0.0750, 32.4271 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = Jun 19 2011 13:00:32 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 4076 # 27-Mar-10 # 1.25923000e-003 # 2.58922600e-004 # 4.14725700e-007 # 1.39259900e-007 # 1.00000000 # 0.0000 # # # # # # 4076 # 27-Mar-10 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -1.04855500e+000 # 1.51549600e-001 # -4.25649700e-004 # 5.35021500e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 4076 # 25-Mar-10 # 6.33407207e-001 # 4.42379573e-003 # -1.69369473e-011 # -5.70063579e+001 # 5.24890589e+001 # -3.78683798e-002 # 5.21251625e+005 # 1.14199848e+001 # -2.19978366e-001 # 2.48608750e+001 # -6.25000000e-004 # 0.00000000e+000 # 0.000000 # # # # datcnv_date = Feb 06 2012 15:52:59, 7.21d [datcnv_vars = 5] # datcnv_in = P:\Cruise_Data_Processing\2011-37\RAW\CTD\renamed files\2011-37-00 61.hex P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # datcnv_skipover = 0 # filter_date = Feb 06 2012 16:30:51, 7.21d # filter_in = P:\Cruise_Data_Processing\2011-37\Processing\convert\2011-37-0061. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Feb 06 2012 16:33:31, 7.21d [derive_vars = 1] # Derive_in = P:\Cruise_Data_Processing\2011-37\Processing\filter\2011-37-0061.c nv P:\Cruise_Data_Processing\2011-37\Processing\doc\2011-37-sbe19.con # file_type = ascii END* The descent rate of the CTD was very noisy with some complete reversals of direction. CTDEDIT was used to clean salinity and to remove records corrupted by shed wakes. Data Processing Notes: Salinity samples were available from near 10m, but the exact depth of firing is impossible to determine. The comparison of CTD salinity with those samples suggests there was no significant drift in calibration. Errors due to mismatch of conductivity and temperature lead to errors on the order of +/-0.005psu. For details on the processing see processing report: 2011-37-proc.doc. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------- ------- ---- ------ ------------ Pressure dbars 10 -99 () (1.8 1) $END !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.0 10.3224 31.5364 7 2.0 10.3145 31.5398 13 3.0 10.2905 31.5375 8 4.0 10.0390 31.6187 6 6.0 9.9009 31.6617 5 7.0 9.6402 31.7659 7 8.0 9.4530 31.8344 4 9.0 9.3810 31.8410 5 10.0 9.1559 31.9247 6 11.0 9.0649 31.9487 9 12.0 9.0519 31.9439 6 13.0 8.9087 31.9908 5 14.0 8.8274 32.0141 6 15.0 8.8298 32.0085 10 16.0 8.8215 32.0093 5 17.0 8.8131 32.0114 5 18.0 8.8039 32.0151 5 19.0 8.7971 32.0185 7 20.0 8.7934 32.0181 6 21.0 8.7721 32.0259 6 22.0 8.7447 32.0370 7 23.0 8.7316 32.0410 5 24.0 8.6588 32.0741 5 25.0 8.5181 32.1617 5 26.0 8.4084 32.2372 7 27.0 8.3767 32.2567 6 28.0 8.3101 32.3068 5 29.0 8.2808 32.3311 6 30.0 8.2671 32.3425 5 31.0 8.2480 32.3598 6 32.0 8.2228 32.3826 7 33.0 8.2175 32.3859 6 34.0 8.2161 32.3863 7 35.0 8.2090 32.3924 7 36.0 8.1928 32.4081 12