*2013/12/16 15:36:02.21
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2011/09/04 16:27:45.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 24
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : C0188742
    NUMBER OF CHANNELS  : 9

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         4.107          26.992
       2 Temperature:Secondary      'deg C (ITS90)' 10.4222        13.8281
       3 Transmissivity             %/metre         5.6            56.1
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.617          27.024
       5 PAR                        uE/m^2/sec      0.231          238.705
       6 Salinity:T1:C1             PSS-78          30.5658        31.4978
       7 Oxygen:Dissolved:SBE       mL/L            4.052          8.166
       8 Oxygen:Dissolved:SBE       umol/kg         176.6415       356.426
       9 Number_of_bin_records      n/a             25             57
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        6  F       ' '     1
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        7  F       ' '     1
       6  -99   ' '        9  F       ' '     4
       7  -99   ' '        7  F       ' '     2
       8  -99   ' '        6  F       ' '     1
       9  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2011-17\Pro
    $END

*ADMINISTRATION
    MISSION             : 2011-17
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : La Perouse
    SCIENTIST           : Yelland D.
    PLATFORM            : John P. Tully

*LOCATION
    GEOGRAPHIC AREA     : WCVI
    STATION             : LD01
    EVENT NUMBER        : 51
    LATITUDE            :  49   0.10000 N  ! (deg min)
    LONGITUDE           : 125  43.84000 W  ! (deg min)
    WATER DEPTH         : 36
    ALTIMETER (M)       : 8.77                                  ! custom item
    $REMARKS
        Altimeter value is distance from bottom and is calculated as the
        median of the deepest 2 metres of data.
    $END

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0550
    LOCATION            : Mid-ship                              ! custom item
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.21B
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name                     Vers   Date       Time     Recs In   Recs Out
    !   ------------------------ ------ ---------- -------- --------- ---------
        SBE_IOS                  3.1    2012/02/21 11:06:44      3009      3009
        CLEAN                    5.0.4  2012/02/21 11:28:22      3009      3009
        SHIFTDAT                 3.4    2012/02/21 11:58:47      3009      3009
        SHIFTDAT                 3.4    2012/02/21 14:46:19      3009      3009
        SHIFTDAT                 3.4    2012/02/21 15:08:15      3009      3009
        DELETE                   6.3    2012/02/21 15:28:32      3009      1000
        CTDEDIT                  4.61   2012/02/22 15:19:14      1000       888
        CALIB                    11.7   2012/02/27 11:26:23       888       888
        BINAVE                   4.1.1  2012/02/27 13:32:57       888        24
        REMOVECH                 8.1.1  2012/02/27 13:55:17        24        24
        CHGUNITS                 3.0    2012/02/27 14:07:59        24        24
        REORDER                  1.3    2012/02/27 14:08:38 ?         ?
        HDREDIT2                 2.5.1  2012/02/27 14:12:59 ?         ?
        CHANGE_CTD_CHANNEL_NAMES 1.0    2013/12/16 15:36:02        24        24
    $END
    $REMARKS
        -CLEAN functions: 2012/02/21 11:22:19 20
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:Wetlabs:ECO-AFL
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 48.00
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -1.00
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Secondary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  0.50
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to    17.64 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT 2012/02/22 15:19:14
            112 records were deleted in this editing session.
         No data values were changed.
        -CALIB parameters: 2012/02/27 11:26:23
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2011-17\Processing\doc\2011-17-recal.ccf
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
          8 Fluorescence:Wetlabs:ECO-AFL  mg/m^3     10  0.9100000E-01  0.1000000E+01
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2012/02/27 13:55:17
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Primary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Status:Pump
          Descent_Rate [m/s]
          Altimeter [metres]
          Salinity:T0:C0 [PSS-78]
          Flag
        -CHANGE units:
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2012/02/27 14:12:59
         Applied edit header: P:\Cruise_Data_Processing\2011-17\Processing\doc\2011-17-HDR.TXT
         Channel  1: Pressure [decibar]
           Units:  dbars ==> decibar
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  5: PAR [uE/m^2/sec]
           Format: F11.3 ==> F7.1
         Channel  6: Salinity:Practical:T1:C1 [PSS-78]
           Name:   Salinity:T1:C1 ==> Salinity:Practical:T1:C1
         Channel  7: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = E:\Data\2011-17\2011-17-0051.hex
      Software Version Seasave V 7.21b
      Temperature SN = 2374
      Conductivity SN = 3396
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Sep 04 2011 09:28:57
      NMEA Latitude = 49 00.10 N
      NMEA Longitude = 125 43.84 W
      NMEA UTC (Time) = Sep 04 2011  16:27:45
      Store Lat/Lon Data = Append to Every Scan
      GPIB address = 1
      underwater unit scan rate = 24 Hz
      Paroscientific Digiquartz pressure sensor with high resolution counter
      number of scans to advance conductivity = 1.750
      two 12 bit A/D voltages per word start with word # 5
      number of words from the deck unit = 12
       Ship: J P Tully
       Station: LD01
       Depth: 36
      System UTC = Sep 04 2011 16:28:57
    # nquan = 17
    # nvalues = 3009
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = xmiss: Beam Transmission, Chelsea/Seatech [%]
    # name 7 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 8 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 9 = par: PAR/Irradiance, Biospherical/Licor
    # name 10 = pumps: Pump Status
    # name 11 = dz/dtM: Descent Rate [m/s]
    # name 12 = altM: Altimeter [m]
    # name 13 = sal00: Salinity, Practical [PSU]
    # name 14 = sal11: Salinity, Practical, 2 [PSU]
    # name 15 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 16 = flag: flag
    # span 0 =          1,       3009
    # span 1 =      2.734,     27.643
    # span 2 =    10.3811,    13.8556
    # span 3 =    10.3774,    13.8554
    # span 4 =   3.500923,   3.705200
    # span 5 =   3.500702,   3.705285
    # span 6 =    45.5530,    86.5677
    # span 7 =     0.4885,    27.4421
    # span 8 =     1.8680,     3.5373
    # span 9 = 1.8492e-01, 6.9923e+02
    # span 10 =          0,          1
    # span 11 =     -1.223,      1.024
    # span 12 =       0.00,      33.58
    # span 13 =    30.5582,    31.5415
    # span 14 =    30.5572,    31.5278
    # span 15 =    3.94543,    8.43013
    # span 16 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Sep 04 2011 16:27:45 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2374</SerialNumber>
    #       <CalibrationDate>01-Apr-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.34933399e-003</G>
    #       <H>6.45978519e-004</H>
    #       <I>2.36515700e-005</I>
    #       <J>2.25853980e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3396</SerialNumber>
    #       <CalibrationDate>29-Mar-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.91328016e+000</G>
    #         <H>1.31301026e+000</H>
    #         <I>2.66193245e-004</I>
    #         <J>4.87230021e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>75636</SerialNumber>
    #       <CalibrationDate>13-Apr-11 </CalibrationDate>
    #       <C1>-4.232943e+004</C1>
    #       <C2>1.065076e-001</C2>
    #       <C3>1.464900e-002</C3>
    #       <D1>3.694200e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.041883e+001</T1>
    #       <T2>-3.536199e-004</T2>
    #       <T3>4.388420e-006</T3>
    #       <T4>2.583800e-009</T4>
    #       <Slope>0.99993936</Slope>
    #       <Offset>0.23996</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.286170e-002</AD590M>
    #       <AD590B>-9.445820e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2668</SerialNumber>
    #       <CalibrationDate>01-Apr-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35634083e-003</G>
    #       <H>6.48582753e-004</H>
    #       <I>2.44368386e-005</I>
    #       <J>2.40505893e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2754</SerialNumber>
    #       <CalibrationDate>29-Mar-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.05922233e+001</G>
    #         <H>1.61309216e+000</H>
    #         <I>-1.72181967e-003</I>
    #         <J>2.24719869e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1176</SerialNumber>
    #       <CalibrationDate>01-Apr-11p</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.7380e-001</Soc>
    #         <offset>-0.5196</offset>
    #         <A>-3.5502e-003</A>
    #         <B> 1.8841e-004</B>
    #         <C>-3.3087e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92630e-004</D1>
    #         <D2>-4.64800e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.9100</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>2216</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <ScaleFactor>2.50000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0293</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Transmissometer, Chelsea/Seatech -->
    #     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
    #       <SerialNumber>1396DR</SerialNumber>
    #       <CalibrationDate>Aug- 15-2011</CalibrationDate>
    #       <M>18.8502</M>
    #       <B>-0.0189</B>
    #       <PathLength>0.250</PathLength>
    #     </TransChelseaSeatechWetlabCStarSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Altimeter -->
    #     <AltimeterSensor SensorID="0" >
    #       <SerialNumber></SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <ScaleFactor>15.000</ScaleFactor>
    #       <Offset>0.000</Offset>
    #     </AltimeterSensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, PAR/Irradiance, Biospherical/Licor -->
    #     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
    #       <SerialNumber>4601</SerialNumber>
    #       <CalibrationDate>16-Mar-11</CalibrationDate>
    #       <M>1.00000000</M>
    #       <B>0.00000000</B>
    #       <CalibrationConstant>4219409282.69999980</CalibrationConstant>
    #       <Multiplier>1.00000000</Multiplier>
    #       <Offset>-0.34320000</Offset>
    #     </PAR_BiosphericalLicorChelseaSensor>
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Feb 16 2012 13:49:47, 7.21d [datcnv_vars = 13]
    # datcnv_in = P:\Cruise_Data_Processing\2011-17\RAW\CTD\2011-17-0051.hex P:\Crui
    se_Data_Processing\2011-17\Processing\doc\2011-17-ctd-new.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = yes
    # wildedit_date = Feb 16 2012 14:09:16, 7.21d
    # wildedit_in = P:\Cruise_Data_Processing\2011-17\Processing\convert\2011-17-005
    1.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 20.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 25
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Feb 21 2012 09:18:08, 7.21d
    # alignctd_in = P:\Cruise_Data_Processing\2011-17\Processing\wildedit\2011-17-00
    51.cnv
    # alignctd_adv = sbeox0V 4.000
    # celltm_date = Feb 21 2012 10:05:30, 7.21d
    # celltm_in = P:\Cruise_Data_Processing\2011-17\Processing\align\2011-17-0051.cn
    v
    # celltm_alpha = 0.0200, 0.0300
    # celltm_tau = 7.0000, 9.0000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Feb 21 2012 10:15:25, 7.21d [derive_vars = 3]
    # Derive_in = P:\Cruise_Data_Processing\2011-17\Processing\celltm\2011-17-0051.c
    nv P:\Cruise_Data_Processing\2011-17\Processing\doc\2011-17-ctd-new.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    CTDEDIT was used to remove records from the top and bottom of the cast.


    Data Processing Notes:
        ----------------------
        Fluorescence, Transmissivity and PAR data are nominal and unedited except
          that some records were removed in editing temperature and salinity.

        For details on how the transmissivity calibration parameters were calculated
          see the document in folder "\cruise_data\documents\transmissivity".

        SBE DO calibration was done using the method described in the SeaBird
          Application Note #64-2.

        The Oxygen:Dissolved:SBE data are considered, roughly, to be:
              ±1    mL/L above 10db
              ±0.2  mL/L from 10 to 100db
       ±0.1  mL/L from 100db to 200db
       ±0.04 mL/L below 200db

        For details on the processing see processing report: 2011-17-proc.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !Name                           Units    Fmla Pad    Coefficients
    !------------------------------ -------- ---- ------ ------------
     Fluorescence:Wetlabs:ECO-AFL   mg/m^3     10 -99    () (0.91E-01 1)
    $END
!--1--- ---2---- --3-- ---4--- --5--- ---6---- --7--- --8-- -9--
!Pressu Temperat Trans Fluores  PAR   Salinity Oxygen Oxyge Numb
!re     ure:     missi cence:         :T1:C1   :      n:    er_o
!       Secondar vity  URU:                    Dissol Disso ~bin
!       y              Wetlabs                 ved:   lved: _rec
!                                              SBE    SBE   ords
!------ -------- ----- ------- ------ -------- ------ ----- ----
*END OF HEADER
    4.1  13.8053   5.7  27.024  238.7  30.5658   8.17 356.4   35
    5.0  13.8134   5.6  26.265  138.5  30.5691   7.80 340.5   50
    6.0  13.8281   8.7  22.109   62.6  30.5998   7.48 326.3   50
    7.0  13.7629  15.8  14.397   28.6  30.6303   7.03 306.7   57
    8.0  13.2710  25.0   9.132   16.1  30.6898   6.59 287.8   48
    9.0  12.9408  30.8   7.227    9.2  30.7476   6.02 262.6   31
   10.0  12.5672  33.5   6.173    6.0  30.8162   5.73 250.1   25
   11.0  12.1220  36.5   6.529    4.6  30.9090   5.55 242.0   29
   12.0  11.9355  40.5   5.035    3.7  30.9511   5.32 231.9   45
   13.0  11.6985  44.4   4.422    3.2  30.9878   5.12 223.2   39
   14.0  11.5389  49.4   4.238    2.5  31.0050   4.98 217.3   35
   15.0  11.4059  50.8   3.477    1.8  31.0235   4.79 208.8   33
   16.0  11.3348  52.1   2.469    1.5  31.0544   4.57 199.5   28
   17.0  11.2193  52.5   1.846    1.3  31.1717   4.50 196.3   28
   18.0  11.0736  52.5   1.646    1.1  31.2645   4.48 195.4   33
   19.0  11.0435  52.4   1.317    0.9  31.2738   4.45 193.9   42
   20.0  11.0026  52.8   1.102    0.7  31.2876   4.37 190.5   36
   21.0  10.9651  53.0   1.161    0.6  31.2995   4.31 187.8   30
   22.0  10.8621  52.7   1.046    0.5  31.3348   4.26 185.7   33
   23.0  10.7494  53.5   0.743    0.4  31.3696   4.22 184.0   42
   24.0  10.6672  54.9   0.617    0.4  31.3970   4.14 180.4   44
   25.0  10.5831  56.1   0.631    0.3  31.4282   4.05 176.6   35
   26.0  10.5143  55.2   0.708    0.3  31.4622   4.11 179.1   29
   27.0  10.4222  53.3   0.684    0.2  31.4978   4.24 185.0   31