*2013/12/16 15:35:45.13 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2011/02/23 17:43:25.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 50 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 5B62B9E6 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.397 49.651 2 Temperature:Primary 'deg C (ITS90)' 7.0779 9.093567 3 Salinity:T0:C0 PSS-78 27.5528 32.05697 4 Number_of_bin_records n/a 1 16 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2011-12\Pro $END *ADMINISTRATION MISSION : 2011-12 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Kyoquot Circulation SCIENTIST : Tuele D. PLATFORM : Haida Joye *LOCATION GEOGRAPHIC AREA : Kyoquot Sound STATION : Crowther EVENT NUMBER : 1 LATITUDE : 50 1.57200 N ! (deg min) LONGITUDE : 127 19.52100 W ! (deg min) WATER DEPTH : 50 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $REMARKS SOFTWARE VERSION 1.59 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1.2 2012/06/27 15:43:56 789 789 CLEAN 5.0.4 2012/06/27 15:44:28 ? ? MERGEHDR 1.1 2012/06/27 15:57:10 789 789 ADTIMCH 4.3 2012/06/27 16:22:51 789 789 SHIFTDAT 3.4 2012/06/27 16:39:25 789 789 DELETE 6.3 2012/06/27 16:40:09 789 387 CTDEDIT 4.61 2012/06/27 16:52:55 387 263 BINAVE 4.1.1 2012/06/27 17:15:33 263 50 REMOVECH 8.1.1 2012/06/27 17:28:19 50 50 HDREDIT2 2.5.1 2012/06/27 17:32:44 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:35:45 50 50 $END $REMARKS -CLEAN functions: 2012/06/27 15:44:28 Set event to last 4 characters of file name -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -2.50 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 39.80 dbars Sample interval (from FILE section of header) = 0.500 seconds. -CTDEDIT 2012/06/27 16:52:55 124 records were deleted in this editing session. 10 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure* Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2012/06/27 17:28:19 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Flag -HEADER EDITS: 2012/06/27 17:32:44 Applied edit header: P:\Cruise_Data_Processing\2011-12\Processing\doc\2011-12-hdr.txt Channel 1: Pressure [decibar] Name: Pressure:StrainGauge ==> Pressure Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 3: Salinity:Practical:T0:C0 [PSS-78] Name: Salinity:T0:C0 ==> Salinity:Practical:T0:C0 $END *COMMENTS SBE HEADER Sea-Bird SBE19 Data File: FileName = C:\Kyuquot\CTD Data\Feb2011\feb23.hex Software Version 1.59 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Feb 25 2011 11:43:20 ds SEACAT PROFILER V3.0c SN 1294 02/25/11 12:47:33.292 strain gauge pressure sensor: SN = 163223, range = 1,000 psia, tc = -44 clk = 32767.961 iop = 163 vmain = 12.1 vlith = 5.0 mode = PROFILE ncasts = 7 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 3335 hertz pump delay = 45 seconds samples = 5820 free = 80925 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 0 logdata = NO S> dh cast 0 02/23 10:43:25 samples 0 to 788 sample rate = 1 scan every 0.5 seco nds stop = switch off S> # nquan = 7 # nvalues = 789 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity, Practical [PSU] # name 6 = flag: flag # span 0 = 1, 789 # span 1 = -0.290, 49.804 # span 2 = 5.8804, 9.1207 # span 3 = 0.163856, 3.448666 # span 4 = -0.625, 0.624 # span 5 = 1.2977, 32.1487 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Feb 23 2011 10:43:25 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 1294 # 01-Apr-08 # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.23654454e-003 # 5.97243614e-004 # 3.49970925e-006 # -2.00770183e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 1294 # 01-Apr-08 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # 0.00000000e+000 # # # -3.89502607e+000 # 4.63087131e-001 # 1.94591096e-003 # -7.84053892e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 163223 # 02-Apr-08 # 4.961971e+002 # -1.302448e-001 # 1.274836e-007 # 0.00000 # # # # datcnv_date = Jun 27 2012 13:50:01, 7.21d [datcnv_vars = 5] # datcnv_in = P:\Cruise_Data_Processing\2011-12\RAW\CTD\feb23000.hex P:\Cruise_D ata_Processing\2011-12\Processing\doc\1294 Feb2011.xmlcon # datcnv_skipover = 0 # filter_date = Jun 27 2012 15:33:15, 7.21d # filter_in = P:\Cruise_Data_Processing\2011-12\Processing\convert\2011-12-0001. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # Derive_date = Jun 27 2012 15:36:48, 7.21d [derive_vars = 1] # Derive_in = P:\Cruise_Data_Processing\2011-12\Processing\filter\2011-12-0001.c nv P:\Cruise_Data_Processing\2011-12\Processing\doc\1294 Feb2011.xmlcon # file_type = ascii END* CTDEDIT was used to remove surface records and a few records corrupted by shed wakes; salinity was cleaned very lightly. Data Processing Notes: ---------------------- For details on the processing see processing report: 2011-12-proc.doc. !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.4 7.0779 27.5528 1 2.0 7.1370 27.7825 6 3.0 7.2591 28.0723 5 4.0 7.3503 28.3858 4 5.0 7.3979 28.5275 5 6.0 7.4526 28.6917 4 6.9 7.5694 29.1229 4 8.0 7.6442 29.2837 5 9.0 7.6943 29.4020 4 10.0 7.7700 29.6014 5 11.0 7.8433 29.7498 4 12.0 7.8986 29.8716 5 13.1 7.9135 29.9151 4 14.0 7.8873 29.9653 4 14.9 7.8710 29.9984 4 16.0 7.8615 30.0249 5 17.0 7.8490 30.0559 4 18.0 7.8206 30.0837 5 19.0 7.8273 30.1484 4 20.0 7.8465 30.2010 5 21.1 7.8634 30.2440 5 22.1 7.8955 30.2859 5 23.0 7.9105 30.2955 4 23.9 7.9144 30.2972 5 25.0 7.9107 30.3241 6 26.0 7.9190 30.3542 6 27.0 7.9337 30.4028 6 28.0 7.9593 30.4522 5 29.0 8.0005 30.5389 6 30.1 8.0423 30.5962 5 31.0 8.0755 30.6402 5 32.0 8.1082 30.6962 5 33.0 8.1666 30.7763 5 34.0 8.3422 31.0073 6 35.0 8.4747 31.2135 5 36.0 8.5508 31.2645 5 37.0 8.5889 31.3310 5 38.0 8.6380 31.4107 6 39.0 8.6724 31.4438 6 40.0 8.6949 31.4772 6 41.0 8.7072 31.4931 5 42.0 8.7185 31.5002 6 43.0 8.7290 31.5105 5 44.0 8.7411 31.5284 6 45.0 8.7639 31.5584 6 46.0 8.8043 31.6245 8 47.0 8.8862 31.7210 16 47.9 8.9287 31.7826 7 49.0 9.0024 31.8995 7 49.7 9.0936 32.0570 3