*2013/12/16 15:35:41.56
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2011/11/30 15:46:59.000
    TIME INCREMENT      : 0 0 0 1 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 55
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : CBA62125
    NUMBER OF CHANNELS  : 10

    $TABLE: CHANNELS
    ! No Name                       Units           Minimum        Maximum
    !--- -------------------------- --------------- -------------- --------------
       1 Pressure                   decibar         2.177          55.824
       2 Temperature:Secondary      'deg C (ITS90)' 8.4149         8.421
       3 Transmissivity             %/metre         28.3           30.6
       4 Fluorescence:URU:Wetlabs   mg/m^3          0.367          0.489
       5 PAR                        uE/m^2/sec      0              11.479
       6 PAR:Reference              uE/m^2/sec      16.783         18.648
       7 Salinity:T1:C1             PSS-78          30.2723        30.2896
       8 Oxygen:Dissolved:SBE       mL/L            5.074          5.106
       9 Oxygen:Dissolved:SBE       umol/kg         221.3159       222.7088
      10 Number_of_bin_records      n/a             1              8
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        6  F       ' '     1
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        7  F       ' '     1
       6  -99   ' '        7  F       ' '     1
       7  -99   ' '        9  F       ' '     4
       8  -99   ' '        7  F       ' '     2
       9  -99   ' '        6  F       ' '     1
      10  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2011-11\Pro
    $END

*ADMINISTRATION
    MISSION             : 2011-11
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : SoG/JdF
    SCIENTIST           : Chandler P.
    PLATFORM            : Vector

*LOCATION
    GEOGRAPHIC AREA     : Juan de Fuca Strait / Strait of Georgia
    STATION             : 53
    EVENT NUMBER        : 28
    LATITUDE            :  48  33.21000 N  ! (deg min)
    LONGITUDE           : 122  44.99000 W  ! (deg min)
    WATER DEPTH         : 60
    ALTIMETER (M)       : 7.06                                  ! custom item
    $REMARKS
        Altimeter value is distance from bottom and is calculated as the
        median of the deepest 2 metres of data.
    $END

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0443
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.21D
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name                     Vers   Date       Time     Recs In   Recs Out
    !   ------------------------ ------ ---------- -------- --------- ---------
        SBE_IOS                  3.1    2012/03/13 15:37:37       177       177
        CLEAN                    5.0.4  2012/03/13 15:41:19       177       177
        SHIFTDAT                 3.4    2012/03/13 17:17:38       177       177
        SHIFTDAT                 3.4    2012/03/13 17:24:42       177       177
        DELETE                   6.3    2012/03/14 14:07:32       177       101
        CALIB                    11.7   2012/03/15 17:42:54       101       101
        BINAVE                   4.1.1  2012/03/16 10:04:46       101        55
        REMOVECH                 8.1.1  2012/03/16 10:05:01        55        55
        CHGUNITS                 3.0    2012/03/16 10:07:23        55        55
        REORDER                  1.3    2012/03/16 10:07:30 ?         ?
        HDREDIT2                 2.5.1  2012/03/16 10:10:03 ?         ?
        CHANGE_CTD_CHANNEL_NAMES 1.0    2013/12/16 15:35:41        55        55
    $END
    $REMARKS
        -CLEAN functions: 2012/03/13 15:41:13 20
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:Wetlabs:ECO-AFL
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  2.00
        -The following SHIFT parameters were used.
         Shift Channel: pH:SBE
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  4.00
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure NOT filtered.
         Swells deleted. Warning message if pressure difference of      2.00
         Slow Drop Rate NOT deleted.
        -CALIB parameters: 2012/03/15 17:42:54
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2011-11\Processing\doc\2011-11-recal1.ccf
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
          8 Fluorescence:Wetlabs:ECO-AFL  mg/m^3     10  0.6100000E-01  0.1000000E+01
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2012/03/16 10:05:01
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Primary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          pH:SBE [pH Units]
          Status:Pump
          Descent_Rate [m/s]
          Altimeter [metres]
          Salinity:T0:C0 [PSS-78]
          Flag
        -CHANGE units:
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2012/03/16 10:10:03
         Applied edit header: P:\Cruise_Data_Processing\2011-11\Processing\doc\2011-11-hdr.txt
         Channel  1: Pressure [decibar]
           Units:  dbars ==> decibar
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Wetlabs [mg/m^3]
           Name:   Fluorescence:Wetlabs:ECO-AFL ==> Fluorescence:URU:Wetlabs
         Channel  5: PAR [uE/m^2/sec]
           Format: F11.3 ==> F7.1
         Channel  6: PAR:Reference [uE/m^2/sec]
           Format: F11.3 ==> F7.1
         Channel  7: Salinity:Practical:T1:C1 [PSS-78]
           Name:   Salinity:T1:C1 ==> Salinity:Practical:T1:C1
         Channel  8: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\Data\2011-11\2011-11-028.hex
      Software Version Seasave V 7.21d
      Temperature SN = 2106
      Conductivity SN = 1764
      Number of Bytes Per Scan = 40
      Number of Voltage Words = 5
      Number of Scans Averaged by the Deck Unit = 24
      System UpLoad Time = Nov 30 2011 07:49:38
      NMEA Latitude = 48 33.21 N
      NMEA Longitude = 122 44.99 W
      NMEA UTC (Time) = Nov 30 2011  15:46:59
      Store Lat/Lon Data = Append to Every Scan
      SBE 11plus V 5.1e
      number of scans to average = 24
      pressure baud rate = 9600
      NMEA baud rate = 4800
      surface PAR voltage added to scan
      A/D offset = 0
      Latitude/Longitude added to scan
      GPIB address = 1
      advance primary conductivity  0.073 seconds
      advance secondary conductivity  0.073 seconds
      S>
       Ship: Vector
       Mission: 2011-11
       Station: 53
       Depth: 60
      System UTC = Nov 30 2011 15:49:38
    # nquan = 19
    # nvalues = 177
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = xmiss: Beam Transmission, Chelsea/Seatech [%]
    # name 7 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
    # name 8 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 9 = par: PAR/Irradiance, Biospherical/Licor
    # name 10 = spar: SPAR/Surface Irradiance
    # name 11 = ph: pH
    # name 12 = pumps: Pump Status
    # name 13 = dz/dtM: Descent Rate [m/s]
    # name 14 = altM: Altimeter [m]
    # name 15 = sal00: Salinity, Practical [PSU]
    # name 16 = sal11: Salinity, Practical, 2 [PSU]
    # name 17 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 18 = flag: flag
    # span 0 =          1,        177
    # span 1 =      2.057,     55.963
    # span 2 =     8.4142,     8.4229
    # span 3 =     8.4145,     8.4210
    # span 4 =   3.211665,   3.215659
    # span 5 =   3.211706,   3.215701
    # span 6 =    71.9965,    74.8579
    # span 7 =     0.2750,     0.4276
    # span 8 =     2.0293,     2.0391
    # span 9 = 1.0000e-12, 1.1693e+01
    # span 10 = 1.6783e+01, 1.8648e+01
    # span 11 =      8.367,      8.391
    # span 12 =          0,          1
    # span 13 =     -0.816,      0.715
    # span 14 =       1.12,      61.47
    # span 15 =    30.2693,    30.2901
    # span 16 =    30.2716,    30.2903
    # span 17 =    5.06975,    5.10994
    # span 18 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 1
    # start_time = Nov 30 2011 15:46:59 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="15" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2106</SerialNumber>
    #       <CalibrationDate>01-Apr-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.14706003e-003</G>
    #       <H>6.31100076e-004</H>
    #       <I>2.13431760e-005</I>
    #       <J>2.18854475e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>1764</SerialNumber>
    #       <CalibrationDate>29-Mar-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-4.15464915e+000</G>
    #         <H>4.87579437e-001</H>
    #         <I>-6.56660246e-004</I>
    #         <J>5.55755549e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>63507</SerialNumber>
    #       <CalibrationDate>12-Apr-11 </CalibrationDate>
    #       <C1>-4.435468e+004</C1>
    #       <C2>-1.845750e-001</C2>
    #       <C3>1.192740e-002</C3>
    #       <D1>3.979900e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>2.993572e+001</T1>
    #       <T2>-3.336200e-004</T2>
    #       <T3>3.759160e-006</T3>
    #       <T4>1.565300e-009</T4>
    #       <Slope>0.99986626</Slope>
    #       <Offset>5.62145</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.283280e-002</AD590M>
    #       <AD590B>-9.295010e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>2710</SerialNumber>
    #       <CalibrationDate>01-Apr-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.36717391e-003</G>
    #       <H>6.46683268e-004</H>
    #       <I>2.34981097e-005</I>
    #       <J>2.22352352e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2128</SerialNumber>
    #       <CalibrationDate>29-Mar-11 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01926507e+001</G>
    #         <H>1.46093888e+000</H>
    #         <I>-2.51557628e-003</I>
    #         <J>2.74924248e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0997</SerialNumber>
    #       <CalibrationDate>23-Apr-11p</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.7970e-001</Soc>
    #         <offset>-0.4849</offset>
    #         <A> 1.4264e-003</A>
    #         <B> 2.8936e-005</B>
    #         <C>-9.0212e-007</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92630e-004</D1>
    #         <D2>-4.64800e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.5600</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
    #     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
    #       <SerialNumber>2215</SerialNumber>
    #       <CalibrationDate>Aug 4th 2011</CalibrationDate>
    #       <ScaleFactor>2.50000000e+001</ScaleFactor>
    #       <!-- Dark output -->
    #       <Vblank>0.0122</Vblank>
    #     </FluoroWetlabECO_AFL_FL_Sensor>
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Transmissometer, Chelsea/Seatech -->
    #     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
    #       <SerialNumber>1185dr</SerialNumber>
    #       <CalibrationDate>Aug-4-2011</CalibrationDate>
    #       <M>19.5293</M>
    #       <B>-1.1132</B>
    #       <PathLength>0.250</PathLength>
    #     </TransChelseaSeatechWetlabCStarSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Altimeter -->
    #     <AltimeterSensor SensorID="0" >
    #       <SerialNumber></SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <ScaleFactor>15.000</ScaleFactor>
    #       <Offset>0.000</Offset>
    #     </AltimeterSensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, pH -->
    #     <pH_Sensor SensorID="43" >
    #       <SerialNumber>0692</SerialNumber>
    #       <CalibrationDate>29-Dec-2010</CalibrationDate>
    #       <Slope>4.6518</Slope>
    #       <Offset>2.5397</Offset>
    #     </pH_Sensor>
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, PAR/Irradiance, Biospherical/Licor -->
    #     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
    #       <SerialNumber>4601</SerialNumber>
    #       <CalibrationDate>Mar 2011</CalibrationDate>
    #       <M>1.00000000</M>
    #       <B>0.00000000</B>
    #       <CalibrationConstant>4219409282.69999980</CalibrationConstant>
    #       <Multiplier>1.00000000</Multiplier>
    #       <Offset>-0.34320000</Offset>
    #     </PAR_BiosphericalLicorChelseaSensor>
    #   </sensor>
    #   <sensor Channel="14" >
    #     <!-- SPAR voltage, Unavailable -->
    #   </sensor>
    #   <sensor Channel="15" >
    #     <!-- SPAR voltage, SPAR/Surface Irradiance -->
    #     <SPAR_Sensor SensorID="51" >
    #       <SerialNumber>16504</SerialNumber>
    #       <CalibrationDate>16-MAR-2011</CalibrationDate>
    #       <ConversionFactor>1527.28000000</ConversionFactor>
    #       <RatioMultiplier>1.00000000</RatioMultiplier>
    #     </SPAR_Sensor>
    #   </sensor>
    # </Sensors>
    # datcnv_date = Mar 13 2012 14:28:27, 7.21d [datcnv_vars = 15]
    # datcnv_in = P:\Cruise_Data_Processing\2011-11\RAW\CTD\2011-11-0028.hex P:\Crui
    se_Data_Processing\2011-11\Processing\doc\2011-11-ctd-new.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = yes
    # alignctd_date = Mar 13 2012 14:37:09, 7.21d
    # alignctd_in = P:\Cruise_Data_Processing\2011-11\Processing\convert\2011-11-002
    8.cnv
    # alignctd_adv = sbeox0V 4.500
    # celltm_date = Mar 13 2012 14:37:27, 7.21d
    # celltm_in = P:\Cruise_Data_Processing\2011-11\Processing\align\2011-11-0028.cn
    v
    # celltm_alpha = 0.0245, 0.0245
    # celltm_tau = 9.5000, 9.5000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Mar 13 2012 15:36:29, 7.21d [derive_vars = 3]
    # Derive_in = P:\Cruise_Data_Processing\2011-11\Processing\celltm\2011-11-0028.c
    nv P:\Cruise_Data_Processing\2011-11\Processing\doc\2011-11-ctd-new.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = no
    # file_type = ascii
     END*

    Data Processing Notes:
    ----------------------
    The SBE data are considered of lower quality than normal because 24 scans
      were averaged in acquisition. These averages may contain spikes that
      would normally be removed in processing and might be systematic in nature.
      Fine-tuning of alignment settings and CELLTM correction are also less
      sensitive with smoothed data. Unfortunately the same error was made on
      several other cruises using the same equipment, so we can not rely on
      settings determined from those data sets. Given the area is in protected
      waters and the CTD is believed to have worked well with few spikes, it is
      likely the errors caused by this problem are small.

    Fluorescence, PAR and Transmissivity data are nominal and unedited.

    For details on how the transmissivity calibration parameters were calculated
      see the document in folder "\cruise_data\documents\transmissivity".

    SBE DO calibration was done using the method described in the SeaBird
      Application Note #64-2.


    The Tau correction of the SBE DO data could not be applied leading to values
      that are too high in regions of high SBE DO gradient. This error is likely
      up to 0.5mL/L in the strongest gradients, but much lower for most casts.

    The tests for accuracy of Oxygen:Dissolved:SBE data are less reliable than
      usual, but the data are considered, very roughly, to be:
                 high in regions of high DO gradient
                 ±0.5mL/L from 0 to 20db	
                 ±0.2mL/L from 20 to 150db
                 ±0.06mL/L below 150db


    For details on the processing see processing report: 2011-11-proc.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !Name                           Units    Fmla Pad    Coefficients
    !------------------------------ -------- ---- ------ ------------
     Fluorescence:Wetlabs:ECO-AFL   mg/m^3     10 -99    () (0.61E-01 1)
    $END
!--1--- ---2---- --3-- ---4--- --5--- --6--- ---7---- --8--- --9-- -10-
!Pressu Temperat Trans Fluores  PAR   PAR:   Salinity Oxygen Oxyge Numb
!re     ure:     missi cence:         Refere :T1:C1   :      n:    er_o
!       Secondar vity  URU:           nce             Dissol Disso ~bin
!       y              Wetlabs                        ved:   lved: _rec
!                                                     SBE    SBE   ords
!------ -------- ----- ------- ------ ------ -------- ------ ----- ----
*END OF HEADER
    2.2   8.4181  29.1   0.393   11.5   16.8  30.2723   5.07 221.3    8
    3.1   8.4169  29.0   0.397    4.7   16.8  30.2735   5.08 221.6    2
    4.1   8.4166  29.5   0.397    2.8   16.8  30.2737   5.08 221.6    1
    5.1   8.4169  29.4   0.367    2.1   16.8  30.2741   5.08 221.7    2
    6.1   8.4163  30.0   0.397    1.5   16.8  30.2755   5.08 221.7    1
    7.1   8.4151  29.8   0.397    1.1   16.8  30.2778   5.08 221.7    2
    8.1   8.4157  28.9   0.397    0.8   16.8  30.2775   5.08 221.8    1
    9.1   8.4153  29.0   0.397    0.6   16.8  30.2779   5.09 221.8    2
   10.1   8.4154  29.2   0.367    0.4   16.8  30.2777   5.09 221.9    1
   11.1   8.4149  29.5   0.382    0.3   16.8  30.2798   5.09 222.0    2
   12.1   8.4160  30.2   0.367    0.2   16.8  30.2776   5.09 222.0    1
   13.1   8.4167  30.1   0.367    0.2   16.8  30.2775   5.09 222.0    2
   14.1   8.4179  30.4   0.367    0.1   16.8  30.2762   5.09 221.9    1
   15.1   8.4190  30.5   0.367    0.1   16.8  30.2749   5.09 221.9    2
   16.2   8.4199  30.6   0.367    0.1   16.8  30.2735   5.09 221.9    1
   16.8   8.4201  30.5   0.367    0.0   16.8  30.2735   5.09 221.8    1
   17.9   8.4197  30.3   0.367    0.0   16.8  30.2747   5.09 221.8    2
   18.9   8.4192  30.3   0.367    0.0   16.8  30.2762   5.09 221.8    1
   20.0   8.4207  30.4   0.367    0.0   16.8  30.2734   5.09 222.0    2
   21.1   8.4210  30.5   0.367    0.0   16.8  30.2735   5.09 222.0    1
   22.1   8.4207  30.5   0.367    0.0   16.8  30.2743   5.09 222.0    2
   23.1   8.4204  30.3   0.367    0.0   16.8  30.2754   5.09 222.0    1
   24.1   8.4198  30.2   0.367    0.0   16.8  30.2778   5.09 222.0    2
   25.2   8.4199  30.2   0.367    0.0   16.8  30.2775   5.09 221.9    1
   25.9   8.4199  29.9   0.397    0.0   16.8  30.2778   5.09 222.1    1
   26.9   8.4190  29.5   0.428    0.0   16.8  30.2800   5.09 222.2    2
   27.9   8.4171  29.3   0.489    0.0   16.8  30.2853   5.10 222.3    1
   28.9   8.4170  29.3   0.413    0.0   16.8  30.2859   5.09 222.2    2
   30.0   8.4171  29.3   0.397    0.0   16.8  30.2860   5.09 222.2    1
   31.0   8.4177  29.3   0.397    0.0   16.8  30.2848   5.10 222.3    2
   32.0   8.4171  29.5   0.397    0.0   16.8  30.2863   5.10 222.4    1
   33.0   8.4174  29.4   0.397    0.0   16.8  30.2858   5.10 222.4    2
   34.0   8.4187  29.8   0.397    0.0   16.8  30.2824   5.10 222.4    1
   35.0   8.4197  30.0   0.397    0.0   16.8  30.2812   5.10 222.5    2
   36.0   8.4198  29.9   0.367    0.0   16.8  30.2811   5.10 222.5    1
   37.0   8.4197  29.9   0.382    0.0   16.8  30.2817   5.10 222.4    2
   38.0   8.4201  30.1   0.397    0.0   16.8  30.2806   5.10 222.3    1
   39.0   8.4209  30.0   0.397    0.0   16.8  30.2792   5.09 222.2    2
   40.0   8.4205  30.1   0.397    0.0   16.8  30.2802   5.10 222.4    1
   41.0   8.4204  30.0   0.382    0.0   16.8  30.2806   5.10 222.3    2
   42.0   8.4201  30.0   0.397    0.0   16.8  30.2815   5.10 222.4    1
   43.0   8.4198  29.5   0.397    0.0   16.8  30.2834   5.10 222.4    2
   44.0   8.4193  29.2   0.397    0.0   16.8  30.2847   5.10 222.3    1
   45.0   8.4195  28.6   0.367    0.0   16.8  30.2854   5.09 222.2    2
   46.1   8.4193  28.7   0.397    0.0   16.8  30.2873   5.10 222.3    1
   47.1   8.4194  28.4   0.367    0.0   16.8  30.2878   5.09 222.1    2
   48.1   8.4196  28.7   0.367    0.0   16.8  30.2867   5.09 222.1    1
   49.0   8.4204  29.5   0.367    0.0   16.8  30.2841   5.09 222.2    2
   50.2   8.4200  29.3   0.382    0.0   16.8  30.2857   5.09 222.2    2
   50.9   8.4199  28.8   0.382    0.0   16.8  30.2862   5.09 222.2    4
   51.9   8.4197  29.4   0.397    0.0   17.4  30.2855   5.10 222.4    3
   53.0   8.4190  28.8   0.397    0.0   18.0  30.2888   5.10 222.5    3
   54.0   8.4192  28.9   0.397    0.0   18.0  30.2875   5.10 222.5    3
   55.0   8.4190  28.9   0.397    0.0   18.6  30.2886   5.11 222.7    3
   55.8   8.4185  28.3   0.373    0.0   18.6  30.2896   5.11 222.7    5