*2013/12/16 15:35:30.09
*IOS HEADER VERSION 1.10 2011/10/26 2011/10/26

*FILE
    START TIME          : UTC 2011/04/17 23:18:31.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 23
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 4841C90A
    NUMBER OF CHANNELS  : 10

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Pressure                    decibar         2.49           24.01
       2 Temperature:Secondary       'deg C (ITS90)' 7.8885         8.5341
       3 Transmissivity              %/metre         26.2           35.5
       4 Fluorescence:URU:Seapoint   mg/m^3          1.761          5.943
       5 PAR                         uE/m^2/sec      0.423          157.72
       6 PAR:Reference               uE/m^2/sec      2141.304       2151.527
       7 Salinity:T1:C1              PSS-78          29.1554        29.7466
       8 Oxygen:Dissolved:SBE        mL/L            6.024          8.351
       9 Oxygen:Dissolved:SBE        umol/kg         262.8394       364.5655
      10 Number_of_bin_records       n/a             1              48
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        6  F       ' '     1
       4  -99   ' '        8  F       ' '     3
       5  -99   ' '        7  F       ' '     1
       6  -99   ' '        7  F       ' '     1
       7  -99   ' '        9  F       ' '     4
       8  -99   ' '        7  F       ' '     2
       9  -99   ' '        6  F       ' '     1
      10  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: p:\Cruise_Data_Processing\2011-08\Pro
    $END

*ADMINISTRATION
    MISSION             : 2011-08
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : SoG/JdeF Water Properties Survey
    SCIENTIST           : Chandler P.
    PLATFORM            : Vector

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia / Juan de Fuca Strait
    STATION             : 50
    EVENT NUMBER        : 73
    LATITUDE            :  48  57.70000 N  ! (deg min)
    LONGITUDE           : 122  56.08000 W  ! (deg min)
    WATER DEPTH         : 25
    ALTIMETER (M)       : 5.49                                  ! custom item
    $REMARKS
        Altimeter value is distance from bottom and is calculated as the
        median of the deepest 2 metres of data.
    $END

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0941
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.20G
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name                     Vers   Date       Time     Recs In   Recs Out
    !   ------------------------ ------ ---------- -------- --------- ---------
        SBE_IOS                  3.1    2011/09/30 16:38:49      2470      2470
        CLEAN                    5.0.3  2011/09/30 16:46:04      2466      2466
        SHIFTDAT                 3.4    2011/10/03 10:42:20      2466      2466
        SHIFTDAT                 3.4    2011/10/03 11:39:02      2466      2466
        SHIFTDAT                 3.4    2011/10/03 11:46:06      2466      2466
        DELETE                   6.3    2011/10/03 11:52:10      2466       799
        CTDEDIT                  4.61   2011/10/04 10:18:07       799       742
        CALIB                    11.7   2011/10/04 16:14:18       742       742
        FILTERS                  4.3    2011/10/04 17:13:00       742       742
        BINAVE                   4.1.1  2011/10/04 17:14:05       742        23
        REMOVECH                 8.0    2011/10/04 17:14:14        23        23
        CHGUNITS                 3.0    2011/10/04 17:14:20        23        23
        REORDER                  1.3    2011/10/04 17:14:25 ?         ?
        HDREDIT2                 2.5.1  2011/10/05 14:31:26 ?         ?
        HDREDIT2                 2.5.1  2011/10/10 15:45:06 ?         ?
        CHANGE_CTD_CHANNEL_NAMES 1.0    2013/12/16 15:35:30        23        23
    $END
    $REMARKS
        -CLEAN functions: 2011/09/30 16:39:53 20
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Fluorescence:Seapoint
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= 24.00
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.60
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Secondary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift= -0.60
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to    15.53 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT 2011/10/04 10:18:07
             57 records were deleted in this editing session.
         No data values were changed.
        -CALIB parameters: 2011/10/04 16:14:18
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = P:\Cruise_Data_Processing\2011-08\Processing\doc\2011-08-recal.ccf
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
          2 Pressure                      dbars      10 -0.9039000E+00  0.1000000E+01
         11 PAR:Reference                 uE/m^2/se  10  0.0000000E+00  0.1527282E+04
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   15
         The following channel(s) were filtered.
           Salinity:T0:C0
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2011/10/04 17:14:14
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Primary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Status:Pump
          Descent_Rate [m/s]
          Altimeter [metres]
          Salinity:T0:C0 [PSS-78]
          Flag
        -CHANGE units:
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2011/10/05 14:31:26
         Applied edit header: P:\Cruise_Data_Processing\2011-08\Processing\doc\2011-08-hdr.txt
         Channel  1: Pressure [decibar]
           Units:  dbars ==> decibar
           Format: F10.3 ==> F7.1
         Channel  4: Fluorescence:URU:Seapoint [mg/m^3]
           Name:   Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint
         Channel  5: PAR [uE/m^2/sec]
           Format: F11.3 ==> F7.1
         Channel  8: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  9: Oxygen:Dissolved:SBE [umol/kg]
           Format: F7.2 ==> F6.1
         Channel  6: PAR:Reference [uE/m^2/sec]
           Format: F11.3 ==> F7.1
        -HEADER EDITS: 2011/10/10 15:45:06
         Channel  7: Salinity:Practical:T1:C1 [PSS-78]
           Name:   Salinity:T1:C1 ==> Salinity:Practical:T1:C1
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\Data\2011-08\2011-08-00073.hex
      Software Version Seasave V 7.20g
      Temperature SN = 03P5048
      Conductivity SN = 3579
      Number of Bytes Per Scan = 44
      Number of Voltage Words = 5
      Number of Scans Averaged by the Deck Unit = 1
      Append System Time to Every Scan
      System UpLoad Time = Apr 17 2011 09:36:26
      NMEA Latitude = 48 57.70 N
      NMEA Longitude = 122 56.08 W
      NMEA UTC (Time) = Apr 17 2011  23:18:31
      Store Lat/Lon Data = Append to Every Scan
       Vector 2011-08
       Station: 50
       Depth(m): 25
    # nquan = 18
    # nvalues = 2470
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = xmiss: Beam Transmission, Chelsea/Seatech [%]
    # name 7 = flSP: Fluorescence, Seapoint
    # name 8 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 9 = par: PAR/Irradiance, Biospherical/Licor
    # name 10 = spar: SPAR/Surface Irradiance
    # name 11 = pumps: Pump Status
    # name 12 = dz/dtM: Descent Rate [m/s]
    # name 13 = altM: Altimeter [m]
    # name 14 = sal00: Salinity, Practical [PSU]
    # name 15 = sal11: Salinity, Practical, 2 [PSU]
    # name 16 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 17 = flag: flag
    # span 0 =          1,       2470
    # span 1 =      3.242,     25.529
    # span 2 =     7.8843,     8.5488
    # span 3 =     7.8842,     8.5519
    # span 4 =   3.085599,   3.120582
    # span 5 =   3.086265,   3.120725
    # span 6 =    67.6090,    77.8863
    # span 7 = 1.1111e+00, 8.2662e+00
    # span 8 =     2.4921,     3.3431
    # span 9 = 3.4098e-01, 2.8751e+03
    # span 10 = 1.3675e+00, 1.4164e+00
    # span 11 =          0,          1
    # span 12 =     -0.899,      0.939
    # span 13 =       1.07,      28.84
    # span 14 =    29.1429,    29.7626
    # span 15 =    29.1488,    29.7645
    # span 16 =    5.93928,    8.38276
    # span 17 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Apr 17 2011 16:36:26 [System UTC, first data scan.]
    # bad_flag = -9.990e-29
    # <Sensors count="15" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>03P5048</SerialNumber>
    #       <CalibrationDate>06-Jan-11</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.33953022e-003</G>
    #       <H>6.38000967e-004</H>
    #       <I>2.12918748e-005</I>
    #       <J>1.88494463e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3579</SerialNumber>
    #       <CalibrationDate>08-Jan-11</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.41040364e+000</G>
    #         <H>1.16735034e+000</H>
    #         <I>-1.51100311e-003</I>
    #         <J>1.56753762e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0941</SerialNumber>
    #       <CalibrationDate>07-Dec-09</CalibrationDate>
    #       <C1>-4.259763e+004</C1>
    #       <C2>-9.844260e-001</C2>
    #       <C3>1.376500e-002</C3>
    #       <D1>3.562200e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.042047e+001</T1>
    #       <T2>-6.119116e-004</T2>
    #       <T3>4.117890e-006</T3>
    #       <T4>3.466810e-009</T4>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.281400e-002</AD590M>
    #       <AD590B>-9.482010e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>03P5073</SerialNumber>
    #       <CalibrationDate>06-Jan-11</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.38603121e-003</G>
    #       <H>6.42766882e-004</H>
    #       <I>2.24919832e-005</I>
    #       <J>2.08464556e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3581</SerialNumber>
    #       <CalibrationDate>08-Jan-11</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.27936522e+000</G>
    #         <H>1.14237477e+000</H>
    #         <I>-1.53110241e-003</I>
    #         <J>1.56330449e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>2745</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>2</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Transmissometer, Chelsea/Seatech -->
    #     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
    #       <SerialNumber>1185dr</SerialNumber>
    #       <CalibrationDate>Aug- 15-2010</CalibrationDate>
    #       <M>19.5293</M>
    #       <B>-1.1132</B>
    #       <PathLength>0.250</PathLength>
    #     </TransChelseaSeatechWetlabCStarSensor>
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>1483</SerialNumber>
    #       <CalibrationDate>24-Dec-10p</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3460e-001</Soc>
    #         <offset>-0.4913</offset>
    #         <A>-2.2191e-003</A>
    #         <B> 2.5327e-004</B>
    #         <C>-4.8366e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92630e-004</D1>
    #         <D2>-4.64800e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.1000</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Altimeter -->
    #     <AltimeterSensor SensorID="0" >
    #       <SerialNumber>1252</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <ScaleFactor>15.000</ScaleFactor>
    #       <Offset>0.000</Offset>
    #     </AltimeterSensor>
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
    #     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
    #       <SerialNumber>4694</SerialNumber>
    #       <CalibrationDate>03-Mar-2010</CalibrationDate>
    #       <M>1.00000000</M>
    #       <B>0.00000000</B>
    #       <CalibrationConstant>1926782273.59999990</CalibrationConstant>
    #       <Multiplier>1.00000000</Multiplier>
    #       <Offset>-0.73100000</Offset>
    #     </PAR_BiosphericalLicorChelseaSensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, Free -->
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, User Polynomial -->
    #     <UserPolynomialSensor SensorID="61" >
    #       <SerialNumber>005</SerialNumber>
    #       <CalibrationDate>2009</CalibrationDate>
    #       <SensorName>Rinko III Temperature</SensorName>
    #       <A0>0.00000000</A0>
    #       <A1>0.00000000</A1>
    #       <A2>1.00000000</A2>
    #       <A3>0.00000000</A3>
    #     </UserPolynomialSensor>
    #   </sensor>
    #   <sensor Channel="14" >
    #     <!-- SPAR voltage, Unavailable -->
    #   </sensor>
    #   <sensor Channel="15" >
    #     <!-- SPAR voltage, SPAR/Surface Irradiance -->
    #     <SPAR_Sensor SensorID="51" >
    #       <SerialNumber>16504</SerialNumber>
    #       <CalibrationDate>03/16/2011</CalibrationDate>
    #       <ConversionFactor>1.00000000</ConversionFactor>
    #       <RatioMultiplier>1527.29200000</RatioMultiplier>
    #     </SPAR_Sensor>
    #   </sensor>
    # </Sensors>
    # datcnv_date = Sep 30 2011 12:08:40, 7.21d [datcnv_vars = 14]
    # datcnv_in = P:\Cruise_Data_Processing\2011-08\RAW\ctd\2011-08-0073.hex P:\Crui
    se_Data_Processing\2011-08\Processing\doc\2011-08-ctd-cor.xmlcon
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Sep 30 2011 12:13:08, 7.21d
    # wildedit_in = P:\Cruise_Data_Processing\2011-08\Processing\convert\2011-08-007
    3.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Sep 30 2011 15:24:57, 7.21d
    # alignctd_in = P:\Cruise_Data_Processing\2011-08\Processing\wildedit\2011-08-00
    73.cnv
    # alignctd_adv = sbeox0V 4.400
    # Derive_date = Sep 30 2011 16:18:32, 7.21d [derive_vars = 3]
    # Derive_in = P:\Cruise_Data_Processing\2011-08\Processing\align\2011-08-0073.cn
    v P:\Cruise_Data_Processing\2011-08\Processing\doc\2011-08-ctd-cor.xmlcon
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = yes
    # file_type = ascii
     END*
    CTDEDIT was used to remove some records corrutped by shed wakes.

    Data Processing Notes:
    ----------------------
    Fluorescence, Transmissivity and PAR data are nominal and unedited except
      that some records were removed in editing temperature and salinity.

    For details on how the transmissivity calibration parameters were calculated
      see the document in folder "\cruise_data\documents\transmissivity".
    SBE DO calibration was done using the method described in the SeaBird
      Application Note #64-2.

    The Oxygen:Dissolved:SBE data are considered, roughly, to be:
               ±0.25mL/L from 0 to 100db
               ±0.15mL/L from 100db to 200db
               ±0.1mL/L below 200db

    For details on the processing see processing report: 2011-08-proc.doc.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name            Units        Fmla Pad    Coefficients
    !   --------------- ------------ ---- ------ ------------
        Pressure        dbars          10 -99    () (-0.9039 1)
        PAR:Reference   uE/m^2/sec     10 -99    () (0 1527.282)
    $END
!--1--- ---2---- --3-- ---4--- --5--- --6--- ---7---- --8--- --9-- -10-
!Pressu Temperat Trans Fluores  PAR   PAR:   Salinity Oxygen Oxyge Numb
!re     ure:     missi cence:         Refere :T1:C1   :      n:    er_o
!       Secondar vity  URU:           nce             Dissol Disso ~bin
!       y              Seapoin                        ved:   lved: _rec
!                      t                              SBE    SBE   ords
!------ -------- ----- ------- ------ ------ -------- ------ ----- ----
*END OF HEADER
    2.5   8.5139  34.0   3.223  157.7 2142.8  29.1624   8.34 364.0    1
    3.0   8.5158  33.3   3.069  106.1 2148.3  29.1622   8.35 364.6   45
    4.0   8.5129  33.1   3.583   71.1 2146.1  29.1634   8.35 364.6   36
    5.0   8.5271  33.2   3.595   48.9 2144.3  29.1606   8.19 357.7   27
    6.0   8.5341  33.3   3.684   35.2 2149.5  29.1554   7.77 339.1   31
    7.0   8.3286  33.1   4.076   26.7 2149.5  29.1791   7.47 325.9   28
    8.0   8.1098  33.4   4.937   20.2 2149.0  29.2262   7.33 320.0   30
    9.0   8.0630  33.4   5.089   15.3 2144.6  29.2733   7.21 314.6   31
   10.0   8.0467  33.8   4.585   11.5 2143.8  29.2901   7.05 307.5   29
   11.0   8.0418  33.5   5.169    8.8 2148.6  29.3109   6.89 301.0   28
   12.0   8.0171  33.5   5.943    6.7 2148.4  29.3701   6.79 296.3   29
   13.0   7.9974  33.6   4.954    5.2 2149.9  29.4132   6.65 290.2   27
   14.0   7.9895  33.7   3.799    4.0 2141.3  29.4283   6.51 283.9   28
   15.0   7.9635  33.9   4.173    3.1 2147.6  29.4556   6.39 278.7   30
   16.0   7.9319  34.5   3.149    2.4 2149.4  29.5055   6.31 275.3   29
   17.0   7.9169  35.2   2.738    1.9 2150.6  29.5513   6.28 274.0   27
   18.0   7.9175  35.5   2.393    1.5 2149.6  29.6136   6.31 275.4   29
   19.0   7.9186  35.2   2.334    1.3 2150.4  29.6365   6.34 276.7   29
   20.1   7.9134  34.0   1.883    1.0 2150.3  29.6665   6.19 270.2   48
   21.0   7.9100  33.0   1.904    0.9 2151.5  29.6767   6.09 265.9   48
   22.0   7.9000  31.8   1.825    0.7 2149.1  29.7069   6.04 263.7   39
   23.0   7.8918  28.3   1.764    0.5 2150.4  29.7345   6.03 263.2   46
   24.0   7.8885  26.2   1.761    0.4 2151.4  29.7466   6.02 262.8   44