*2011/11/05 16:09:20.76 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2011/02/18 16:58:46.000 TIME INCREMENT : 0 0 0 0.125 0 ! (day hr min sec ms) NUMBER OF RECORDS : 45 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 106A6CC3 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 3.228 46.7015 2 Temperature:Primary 'deg C (ITS90)' 7.450633 7.7097 3 Salinity:T0:C0 PSS-78 28.0846 29.7598 4 Number_of_bin_records n/a 6 11 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2011-02\Pro $END *ADMINISTRATION MISSION : 2011-02 AGENCY : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Morris J. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : Strait of Georgia & BC Inlets STATION : GS05 EVENT NUMBER : 253 LATITUDE : 48 44.59000 N ! (deg min) LONGITUDE : 123 35.32000 W ! (deg min) WATER DEPTH : 59 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-25 SERIAL NUMBER : 0404 $REMARKS SOFTWARE VERSION 1.30 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2011/11/02 14:31:09 2731 2731 MERGEHDR 1.1 2011/11/02 15:46:29 2230 2230 ADTIMCH 4.3 2011/11/03 09:46:25 2230 2230 SHIFTDAT 3.4 2011/11/03 10:25:33 2230 2230 DELETE 6.3 2011/11/03 10:40:59 2230 460 CTDEDIT 4.61 2011/11/04 10:00:28 460 409 BINAVE 4.1.1 2011/11/04 15:22:46 409 45 REMOVECH 8.0 2011/11/05 16:05:29 45 45 HDREDIT2 2.5.1 2011/11/05 16:09:20 ? ? $END $REMARKS -The following ADTIMCH parameters were used. Add 8.00 hours to times in header file section -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.50 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 36.79 dbars Sample interval (from FILE section of header) = 0.125 seconds. -CTDEDIT 2011/11/04 10:00:28 51 records were deleted in this editing session. No data values were changed. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2011/11/05 16:05:29 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Flag -HEADER EDITS: 2011/11/05 16:09:20 Channel 1: Pressure [decibar] Name: Pressure:StrainGauge ==> Pressure Units: dbars ==> decibar Format: F10.3 ==> F7.1 $END *COMMENTS SBE HEADER Sea-Bird SBE25 Data File: FileName = C:\Documents and Settings\HighSeaSalmon\Desktop\HS201102\CTD Data\G S05-253.hex Software Version 1.30 Temperature SN = 4484 Conductivity SN = 3184 System UpLoad Time = Feb 18 2011 17:44:02 Ship:W.E. RICKER Cruise:HS2011-02 Station:GS05 Latitude: Longitude: ds SBE 25 CTD V 4.1c SN 0404 02/18/11 17:40:10.324 external pressure sensor, range = 1450 psia, tcval = -32 xtal = 9437232 clk = 32767.724 vmain = 12.5 iop = 170 vlith = 5.3 ncasts = 6 samples = 17489 free = 1030593 lwait = 0 msec CTD configuration: number of scans averaged = 1, data stored at 8 scans per second real time data transmitted at 1 scans per second minimum conductivity frequency for pump turn on = 3173 pump delay = 45 seconds battery type = ALKALINE 0 external voltages sampled S> dh cast 1 02/18 08:58:46 smpls 5124 to 7854 nv = 0 avg = 1 stp = switch of S> # nquan = 7 # nvalues = 2731 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity, Practical [PSU] # name 6 = flag: flag # span 0 = 1, 2731 # span 1 = -0.395, 46.793 # span 2 = 4.9385, 7.7118 # span 3 = 0.034208, 3.100008 # span 4 = -1.040, 1.087 # span 5 = 0.2899, 29.7610 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.125 # start_time = Feb 18 2011 08:58:46 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 4484 # 30-Dec-10 # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.39909526e-003 # 6.39883276e-004 # 2.11424569e-005 # 1.75457405e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 3184 # 29-Dec-10 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -1.03382520e+001 # 1.45507970e+000 # -4.27580889e-003 # 3.86694018e-004 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 0573 # 30-Dec-10 # 9.199135e+002 # -2.512924e-001 # -2.926915e-008 # 0.00000 # # # # datcnv_date = Nov 02 2011 10:31:03, 7.21d [datcnv_vars = 5] # datcnv_in = P:\Cruise_Data_Processing\2011-02\Processing\raw-25\2011-02-0253.h ex P:\Cruise_Data_Processing\2011-02\Processing\doc\2011-02-ctd0404.con # datcnv_skipover = 0 # wildedit_date = Nov 02 2011 13:56:37, 7.21d # wildedit_in = P:\Cruise_Data_Processing\2011-02\Processing\convert\2011-02-025 3.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 20.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 25 # wildedit_vars = prSM t090C c0S/m # wildedit_excl_bad_scans = yes # wfilter_date = Nov 02 2011 13:57:44, 7.21d # wfilter_in = P:\Cruise_Data_Processing\2011-02\Processing\wildedit\2011-02-025 3.cnv # wfilter_excl_bad_scans = yes # wfilter_action prSM = cosine, 5 # wfilter_action t090C = cosine, 5 # wfilter_action c0S/m = cosine, 5 # celltm_date = Nov 02 2011 14:29:22, 7.21d # celltm_in = P:\Cruise_Data_Processing\2011-02\Processing\filter\2011-02-0253.c nv # celltm_alpha = 0.0400, 0.0000 # celltm_tau = 9.0000, 0.0000 # celltm_temp_sensor_use_for_cond = primary, # Derive_date = Nov 02 2011 14:30:37, 7.21d [derive_vars = 1] # Derive_in = P:\Cruise_Data_Processing\2011-02\Processing\celltm\2011-02-0253.c nv P:\Cruise_Data_Processing\2011-02\Processing\doc\2011-02-ctd1294.CON # file_type = ascii END* CTDEDIT was used to remove some surface records. !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 3.2 7.4506 28.0846 6 4.0 7.5064 28.4893 9 5.0 7.5279 28.7414 9 6.0 7.5514 28.8967 9 7.0 7.5720 29.0107 11 8.0 7.5955 29.1132 9 9.0 7.6017 29.1436 9 10.0 7.6189 29.2064 10 11.1 7.6269 29.2464 9 12.0 7.6296 29.2747 8 13.0 7.6473 29.3018 10 14.0 7.6434 29.3106 9 15.0 7.6397 29.3131 9 16.0 7.6382 29.3152 9 17.0 7.6378 29.3190 9 18.0 7.6393 29.3224 9 19.0 7.6388 29.3248 9 20.0 7.6359 29.3263 10 21.0 7.6319 29.3352 9 22.0 7.6310 29.3637 9 23.0 7.6362 29.3853 9 23.9 7.6464 29.4288 9 25.0 7.6549 29.4575 9 26.0 7.6687 29.4824 8 27.0 7.6783 29.5038 10 28.0 7.6819 29.5436 9 29.0 7.6772 29.5715 9 30.0 7.6832 29.5871 10 31.0 7.6899 29.6025 9 32.0 7.6937 29.6089 9 33.0 7.6937 29.6137 9 34.0 7.6956 29.6167 9 35.0 7.7033 29.6250 9 36.0 7.7089 29.6328 10 37.0 7.7091 29.6373 9 38.0 7.7097 29.6453 10 39.0 7.7016 29.6526 9 40.1 7.7015 29.6650 9 41.0 7.6921 29.6932 9 42.0 7.6576 29.7086 9 43.0 7.6359 29.7150 10 44.0 7.6415 29.7228 9 45.0 7.6369 29.7453 10 46.0 7.6270 29.7544 10 46.7 7.6176 29.7598 6