*2014/11/20 09:57:29.38 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2011/02/09 21:22:23.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 8 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 2B11602F NUMBER OF CHANNELS : 22 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Bottle_Number n/a 1 8 2 Bottle:Firing_Sequence n/a 1 8 3 Pressure decibar 5.2 106.1 4 Temperature:Secondary 'deg C (ITS90)' 7.6951 8.982 5 Transmissivity %/metre 56.2 62.1 6 Fluorescence:URU:Seapoint mg/m^3 0.43E-01 1.208 7 PAR uE/m^2/sec 0 102.7 8 Salinity:T1:C1 PSS-78 29.2999 33.6751 9 Oxygen:Dissolved:SBE mL/L 2.93 6.96 10 Oxygen:Dissolved:SBE umol/kg 127.3 303.8 11 Number_of_bin_records n/a 72 241 12 Sample_Number n/a 29 36 13 Salinity:Bottle PSS-78 29.2776 33.6563 14 Flag:Salinity:Bottle n/a 15 Oxygen:Dissolved mL/L 3.029 6.954 16 Flag:Oxygen:Dissolved n/a 17 Nitrate_plus_Nitrite umol/L 5.95998 28.52758 18 Flag:Nitrate_plus_Nitrite n/a 19 Silicate umol/L 8.7 39.2 20 Flag:Silicate n/a 21 Phosphate umol/L 0.844385 2.16945 22 Flag:Phosphate n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 3 I I 0 2 -99 ' ' 3 I I 0 3 -99 ' ' 7 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 7 F ' ' 1 8 -99 ' ' 9 F ' ' 4 9 -99 ' ' 7 F ' ' 2 10 -99 ' ' 6 F ' ' 1 11 ' ' ' ' 5 I I 0 12 -99 ' ' 5 I I ' ' 13 -99 ' ' 9 F R4 4 14 0 ' ' 3 NQ C ' ' 15 -99 ' ' 8 F R4 3 16 0 ' ' 3 NQ C ' ' 17 -99 ' ' 6 F R4 1 18 0 ' ' 3 NQ C ' ' 19 -99 ' ' 6 F R4 1 20 0 ' ' 3 NQ C ' ' 21 -99 ' ' 7 F R4 2 22 0 ' ' 3 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2011-01 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : P2 EVENT NUMBER : 6 LATITUDE : 48 36.03000 N ! (deg min) LONGITUDE : 126 0.03000 W ! (deg min) WATER DEPTH : 116 ALTIMETER (M) : 10.28 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0506 LOCATION : Mid-ship ! custom item $REMARKS SOFTWARE VERSION SEASAVE V 7.20G $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2011/08/30 09:12:52 1759 1759 CLEAN 5.0.3 2011/08/30 09:14:08 ? ? CLEAN 5.0.3 2011/08/30 09:46:23 1759 1759 ADDSAMP 3.5 2011/08/30 09:47:19 1759 1759 BINAVE 4.1.1 2011/08/30 09:48:05 1759 8 MERGE 3.4 2011/08/30 09:54:55 8 8 CLEAN 5.0.3 2011/08/30 09:55:00 ? ? SORT 3.5 2011/08/30 10:17:20 8 8 REMOVECH 8.0 2011/08/30 10:22:44 8 8 CHGUNITS 3.0 2011/08/30 10:51:35 8 8 REORDER 1.3 2011/08/30 10:51:40 ? ? HDREDIT2 2.5.1 2011/10/12 15:38:26 ? ? CALIB 11.7 2013/06/04 13:15:39 8 8 HDREDIT2 2.6 2013/07/08 08:50:53 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:35:14 8 8 CHANGE_FLAGS 2.0 2014/11/20 09:57:29 8 8 $END $REMARKS -CLEAN functions: 2011/08/30 09:14:06 20 Set event to last 4 characters of file name -CLEAN functions: 2011/08/30 09:46:21 20 Reset #RECS, MIN & MAX values in header. Insert Pad Values in Channel: Salinity:T0:C0 [PSS-78] where channel Salinity:T0:C0 [PSS-78] is in the range 1000 to 9000 0 data records in pad range. -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data_Processing\2011-01\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2011/08/30 09:54:55 2011/08/30 09:54:55 2011/08/30 09:54: Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Phaeo-Pigment:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Dimethyl_Sulphide, Flag:Dimethyl_Sulphide Primary file : Q:\Cruise_Data_Processing\2011-01\Processing\hydro\2011-01-0006.samavg Secondary file: Q:\Cruise_Data_Processing\2011-01\Processing\hydro\2011-01-0006.mrgcln1s Comments from secondary file: Q:\Cruise_Data_Processing\2011-01\Processing\hydro\2011-01-0006.mrgcln1s ------------------------------------------------------------------------ -SORT parameters: 2011/08/30 09:54:47 Sorted in ascending order of channel Bottle_Number -CLEAN functions: 2011/08/30 09:55:00 20 Remove Sea-Bird comments from the header. -SORT parameters: 2011/08/30 10:17:20 Sorted in ascending order of channel Pressure -REMOVECH 2011/08/30 10:22:44 The following CHANNEL(S) were removed: Scan_Number Temperature:Primary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Altimeter [metres] Status:Pump Descent_Rate [m/s] Salinity:T0:C0 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L to umol/kg -HEADER EDITS: 2011/10/12 15:38:26 Applied edit header: P:\Cruise_Data_Processing\2011-01\Processing\doc\2011-01-bot-hdr.txt Channel 2: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 3: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 6: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 7: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 8: Salinity:Practical:T1:C1 [PSS-78] Name: Salinity:T1:C1 ==> Salinity:Practical:T1:C1 Channel 1: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number Channel 1: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number Channel 9: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 15: Oxygen:Dissolved [mL/L] Units: ==> mL/L Channel 10: Oxygen:Dissolved:SBE [umol/kg] Format: F6.2 ==> F6.1 -CALIB parameters: 2013/06/04 13:15:39 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = C:\DATA\Nutrients\doc\Nutrients-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 17 Nitrate_plus_Nitrite umol/L 10 0.1709000E+00 0.9812000E+00 21 Phosphate umol/L 10 0.4530000E-01 0.1011500E+01 -HEADER EDITS: 2013/07/08 08:50:53 Applied edit header: C:\DATA\Nutrients\doc\headedit-correction.txt $END *COMMENTS Comments from secondary file: Q:\Cruise_Data_Processing\2011-01\Processing\hydro\2011-01-0006.mrgcln1s ------------------------------------------------------------------------ Comments from secondary file: Q:\Cruise_Data_Processing\2011-01\Processing\hydro\2011-01-0006.sal ------------------------------------------------------------------- Sample_Number 31: SAL: Duplicates differed by 0.034; one value rejected as poor match against other 75m bottle Analysis methods: ----------------- Chlorophyll samples were filtered onto 25mm GF/F filters and stored in glass scintillation vials at -20C prior to analysis. Samples were extracted in 90% acetone at -20C for 24 hours in the lab and analyzed on a Turner 10AU fluorometer which is calibrated annually with commercially pure chlorophyll a (Sigma). Fluorescence readings taken before and after acidification were used to calculate chlorophyll and phaeopigment concentrations (Holm-Hansen et al 1965). Chlorophyll samples were analyzed on board ship in a controlled temperature lab and at IOS. The average of two samples is reported. Variability is assessed as the CV% (std dev / mean*100). For details see worksheet “CV%” in file 2011-01CHL*.xls. Phaeopigment data are provided for information only and no quality flags are assigned to them. Oxygen samples were analyzed on an automated Winkler titration system (Brinkmann Dosimat model 765 and a PC950 Colorimeter controlled by AutoOxy software V3.4) with modifications based on Carpenter (1965) and adhering to WOCE protocols (Culberson 1991). All samples were analyzed at sea. A shift in the DO standardization parameters occurred between events #32 and #44; this was not investigated to determine if the resultant change in Thiosulfate normality was real, or the result of a shift in lab temperature. Checks of the fit of SBE Dissolved Oxygen against titrated DO suggest that the titrated values from the first part of the cruise are lower than those of the latter part by about 0.02mL/L. For details including a duplicate analysis, see document 2011-01oxy*.xls. Salinity samples were collected in glass bottles and analyzed on Guildline Autosal model 8400B, S/N 68572, at IOS. Salinometers are standardized with IAPSO standard seawater. Full results are in file 2011-01-sal*.xls. Nutrient samples were collected in plastic tubes. Most samples were stored frozen and later analysed at IOS. Deep Silicate samples (400m and deeper) were analyzed cool at IOS. An Astoria analyzer was used following methods described in Barwell-Clarke and Whitney (1996). File "QF 2011-01nuts*.xls" includes the raw data and a precision study. The minimum detectable level for DMS is 0.10 nM, so “0” values should be interpreted as <0.10. For details on the collection and analysis of the DMS data see file 2011-01 DMS Report.doc and for data see DMS 2011-01 summary.xls. References: 1. Barwell-Clarke, J. and Whitney, F. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. 2. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 3. Culberson, C.H. 1991. Dissolved oxygen. WOCE Hydrographic Programme Operations and Methods (July 1991). 15pp. 4. Holm-Hansen, O., Lorenzen, C.J., Holmes, R.W., and Strickland J.D.H. 1965. Fluorometric Determination of Chlorophyll. J.du Cons. Intl. Pour l’Epl. De la Mer. 30:3-15. * For PDF versions of these papers see folder \\Cruise_Data\DOCUMENTS\Analysis Reference Papers Data Processing Notes: ---------------------- Transmissivity, PAR and SBE Fluorescence data are nominal and unedited. For details on how the transmissivity calibration parameters were calculated see the document in folder "\cruise_data\documents\transmissivity". SBE DO calibration was done using the method described in the SeaBird Application NOte #64-2. The Oxygen:Dissolved:SBE channel was corrupted for all or parts of Events #7, 10, 15, 17, 18, 19 and 21. For further processing details see the processing report 2011-01-proc.doc. July 2013: A correction has been applied to Nitrate_plus_Nitrite and Phosphate data from deep-water cruises analyzed at IOS between 2009 and 2012. For details see the following report: Corrections to Nitrate and Phosphate for Deep-Water Cruises from 2009 to 2012.pdf which is stored in folder: \\Cruise_Data\DOCUMENTS\Analysis Reference Papers *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- -------- ---- ------ ------------ Nitrate_plus_Nitrite umol/L 10 -99 () (0.1709 0.9812) Phosphate umol/L 10 -99 () (0.453E-01 1.0115) $END !1- 2- --3--- ---4---- --5-- ---6--- --7--- ---8---- --9--- --10- -11- -12- ---13--- 14 ---15-- 16 --17- 18 --19- 20 --21-- 22 !Bo Bo Pressu Temperat Trans Fluores PAR Salinity Oxygen Oxyge Numb Samp Salinity Fl Oxygen: Fl Nitra Fl Silic Fl Phosph Fl !tt tt re ure: missi cence: :T1:C1 : n: er_o le_ :Bottle ag Dissolv ag te_ ag ate ag ate ag !~u ~u Secondar vity URU: Dissol Disso ~bin Numb ~o ed ~o plus_ ~t ~i ~p !mb en y Seapoin ved: lved: _rec er tt lv Nitri ri ca ha !er ce t SBE SBE ords le ed te te te te !-- -- ------ -------- ----- ------- ------ -------- ------ ----- ---- ---- -------- -- ------- -- ----- -- ----- -- ------ -- *END OF HEADER 8 8 5.2 7.7593 58.2 0.829 102.7 29.2999 6.96 303.8 241 36 29.2776 0 6.954 0 13.3 0 31.6 0 1.17 0 7 7 9.9 7.7895 58.6 0.765 48.5 29.3256 6.95 303.3 241 35 29.3216 0 6.937 0 13.5 6 31.8 6 1.21 6 6 6 24.6 8.9820 60.3 1.208 9.8 32.2267 6.57 286.2 241 34 32.2196 0 6.549 0 6.1 0 9.4 0 0.86 0 5 5 49.4 8.7609 62.1 0.534 1.9 32.2762 6.60 287.3 241 33 32.2843 0 6.590 0 6.0 0 8.7 0 0.84 0 3 3 74.2 8.8718 56.7 0.116 0.5 32.7660 5.20 226.4 72 31 32.7773 0 5.249 6 13.7 0 18.5 0 1.31 0 4 4 74.7 8.8755 56.3 0.123 0.5 32.7579 5.17 225.1 241 32 32.7748 0 5.172 0 14.0 0 19.1 0 1.33 0 2 2 100.1 8.0149 56.2 0.043 0.1 33.5361 3.20 139.3 241 30 33.5325 0 3.204 0 25.3 0 35.1 0 1.96 0 1 1 106.1 7.6951 56.3 0.045 0.0 33.6751 2.93 127.3 241 29 33.6563 0 3.029 0 28.5 0 39.2 0 2.17 0