*2013/12/16 15:35:07.70 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2010/04/03 22:01:39.000 TIME INCREMENT : 0 0 0 0.5 0 ! (day hr min sec ms) NUMBER OF RECORDS : 48 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 74E64326 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 0.4372222 46.99486 2 Temperature:Primary 'deg C (ITS90)' 8.2007 8.426223 3 Salinity:T0:C0 PSS-78 26.28429 28.88991 4 Number_of_bin_records n/a 2 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 10 F ' ' 3 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2010-29\Pro $END *ADMINISTRATION MISSION : 2010-29 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Discovery Islands SCIENTIST : Tuele D. PLATFORM : Echo *LOCATION GEOGRAPHIC AREA : Discovery Islands STATION : DE Pass EVENT NUMBER : 19 LATITUDE : 50 15.09700 N ! (deg min) LONGITUDE : 124 59.13200 W ! (deg min) WATER DEPTH : 206 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19 SERIAL NUMBER : 1294 $REMARKS SOFTWARE VERSION 1.58 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2010/07/19 11:18:55 651 651 HDREDIT2 2.5.1 2010/07/19 11:20:36 ? ? ADTIMCH 4.3 2010/07/20 09:15:48 651 651 SHIFTDAT 3.4 2010/07/20 09:16:15 651 651 DELETE 6.3 2010/07/20 09:44:46 651 131 BINAVE 4.1.1 2010/07/20 11:04:34 131 48 REMOVECH 8.0 2010/07/20 11:05:07 48 48 HDREDIT2 2.5.1 2010/07/20 11:05:12 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:35:07 48 48 $END $REMARKS -HEADER EDITS: 2010/07/19 11:20:36 Applied edit header: Q:\Cruise_Data_Processing\2010-29\Processing\doc\hdr-fix.hdr -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -1.50 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 37.20 dbars Sample interval (from FILE section of header) = 0.500 seconds. -The following BINAVE parameters were used: Bin channel = Pressure:StrainGauge Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2010/07/20 11:05:07 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Descent_Rate [m/s] Flag -HEADER EDITS: 2010/07/20 11:05:12 Applied edit header: Q:\Cruise_Data_Processing\2010-29\Processing\doc\2010-29-HDR.TXT $END *COMMENTS SBE HEADER Sea-Bird SBE19 Data File: FileName = C:\Discovery Islands\CTD\april3021.hex Software Version 1.58 Temperature SN = 1294 Conductivity SN = 1294 System UpLoad Time = Apr 03 2010 18:58:37 ds SEACAT PROFILER V3.0c SN 1294 04/03/10 18:00:38.717 strain gauge pressure sensor: SN = 163223, range = 1,000 psia, tc = -44 clk = 32767.898 iop = 164 vmain = 11.5 vlith = 5.1 mode = PROFILE ncasts = 24 sample rate = 1 scan every 0.5 seconds minimum raw conductivity frequency for pump turn on = 3335 hertz pump delay = 45 seconds samples = 17870 free = 39960 lwait = 0 msec SW1 = 90 battery cutoff = 7.2 volts number of voltages sampled = 2 logdata = NO S> dh cast 21 04/03 15:01:39 samples 15809 to 16459 sample rate = 1 scan every 0 .5 seconds stop = switch off S> # nquan = 7 # nvalues = 651 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity, Practical [PSU] # name 6 = flag: flag # span 0 = 1, 651 # span 1 = -0.056, 47.201 # span 2 = 8.0790, 8.4301 # span 3 = 0.944646, 3.073189 # span 4 = -0.892, 1.248 # span 5 = 8.0609, 28.8950 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.5 # start_time = Apr 03 2010 15:01:39 # bad_flag = -9.990e-29 # # # # # # 1294 # 01-Apr-08 # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.23654454e-003 # 5.97243614e-004 # 3.49970925e-006 # -2.00770183e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 1294 # 01-Apr-08 # 1 # # 0.0000 # 2000.0000 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # 0.00000000e+000 # # # -3.89502607e+000 # 4.63087131e-001 # 1.94591096e-003 # -7.84053892e-005 # -9.57000000e-008 # 3.2500e-006 # # 1.00000000 # 0.00000 # # # # # # # # # # # # 163223 # 02-Apr-08 # 4.961971e+002 # -1.302448e-001 # 1.274836e-007 # 0.00000 # # # # datcnv_date = Jul 17 2010 14:51:35, 7.20c # datcnv_in = Q:\Cruise_Data_Processing\2010-29\RAW\CTD\april3021.hex Q:\Cruise_ Data_Processing\2010-29\Processing\doc\2010-29.con # datcnv_skipover = 0 # filter_date = Jul 17 2010 15:12:57, 7.20c # filter_in = Q:\Cruise_Data_Processing\2010-29\Processing\convert\2010-29-0019. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 2.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prSM # Derive_date = Jul 17 2010 15:14:11, 7.20c # Derive_in = Q:\Cruise_Data_Processing\2010-29\Processing\filter\2010-29-0019.c nv Q:\Cruise_Data_Processing\2010-01\Processing\doc\2010-01-ctd2.con # file_type = ascii END* ************************************************************************ A text editor was used to remove the first 168 records that were from an initial soak period. ************************************************************************ Salinity calibration samples suggest that salinity is +/- 0.002 in low temperature gradient areas. Errors are likely to be somewhat larger in higher gradients. !----1---- ---2---- ---3---- -4-- !Pressure Temperat Salinity Numb ! ure: :T0:C0 er_o ! Primary ~bin ! _rec ! ords !--------- -------- -------- ---- *END OF HEADER 0.000 8.4262 26.2843 9 1.000 8.4190 26.3091 10 2.000 8.3911 26.4264 3 3.000 8.2881 26.8013 2 4.000 8.2007 27.1606 2 5.000 8.2062 27.4881 3 6.000 8.2081 27.6745 2 7.000 8.2120 27.7610 2 8.000 8.2223 27.8846 3 9.000 8.2300 27.9583 2 10.000 8.2406 28.0455 2 11.000 8.2632 28.2343 3 12.000 8.2699 28.3750 2 13.000 8.2677 28.4444 2 14.000 8.2662 28.4831 3 15.000 8.2629 28.5223 2 16.000 8.2647 28.5424 2 17.000 8.2656 28.5492 3 18.000 8.2670 28.5529 2 19.000 8.2678 28.5574 2 20.000 8.2685 28.5623 3 21.000 8.2691 28.5672 2 22.000 8.2683 28.5713 2 23.000 8.2671 28.5782 3 24.000 8.2665 28.5931 2 25.000 8.2661 28.6063 2 26.000 8.2657 28.6149 2 27.000 8.2654 28.6261 3 28.000 8.2643 28.6403 2 29.000 8.2635 28.6541 2 30.000 8.2651 28.6720 3 31.000 8.2666 28.6886 2 32.000 8.2674 28.6978 2 33.000 8.2678 28.7038 2 34.000 8.2704 28.7086 3 35.000 8.2727 28.7162 2 36.000 8.2736 28.7245 2 37.000 8.2783 28.7363 3 38.000 8.2824 28.7455 2 39.000 8.2836 28.7513 2 40.000 8.2863 28.7568 2 41.000 8.2888 28.7622 3 42.000 8.2889 28.7673 2 43.000 8.2920 28.7774 2 44.000 8.2969 28.8005 3 45.000 8.3042 28.8335 2 46.000 8.3124 28.8612 3 47.000 8.3185 28.8899 7