*2011/08/18 17:14:23.48
*IOS HEADER VERSION 1.8  2007/05/25 2007/05/25

*FILE
    START TIME          : UTC 2010/10/13 14:04:06.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 115
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : B1AFFB4B
    NUMBER OF CHANNELS  : 6

    $TABLE: CHANNELS
    ! No Name                    Units           Minimum        Maximum
    !--- ----------------------- --------------- -------------- --------------
       1 Pressure                decibar         5.222          119.596
       2 Temperature:Primary     'deg C (ITS90)' 9.0321         9.5295
       3 Salinity:T0:C0          PSS-78          31.6484        32.1079
       4 Oxygen:Dissolved:SBE    mL/L            3.326          3.664
       5 Oxygen:Dissolved:SBE    umol/kg         144.8829       159.6734
       6 Number_of_bin_records   n/a             10             62
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        7  F       ' '     2
       5  -99   ' '        6  F       ' '     1
       6  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2010-18\Pro
    $END

*ADMINISTRATION
    MISSION             : 2010-18
    AGENCY              : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C.
    COUNTRY             : Canada
    PROJECT             : High Seas Salmon
    SCIENTIST           : Trudel M.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia/Juan de Fuca Strait/WCVI/BC Inlets
    STATION             : JF 01
    EVENT NUMBER        : 113
    LATITUDE            :  48  17.83000 N  ! (deg min)
    LONGITUDE           : 123  36.34000 W  ! (deg min)
    WATER DEPTH         : 132

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0585
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.19
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.1    2011/08/11 16:11:02     10577     10577
        CLEAN    5.0.3  2011/08/11 16:26:52     10535     10535
        SHIFTDAT 3.4    2011/08/12 13:20:29     10535     10535
        SHIFTDAT 3.4    2011/08/12 13:30:44     10535     10535
        DELETE   6.3    2011/08/12 13:40:22     10535      3642
        CTDEDIT  4.61   2011/08/15 09:38:59      3642      3500
        FILTERS  4.3    2011/08/18 14:31:29      3500      3500
        BINAVE   4.1.1  2011/08/18 14:33:10      3500       115
        REMOVECH 8.0    2011/08/18 14:59:13       115       115
        CHGUNITS 3.0    2011/08/18 14:59:29       115       115
        REORDER  1.3    2011/08/18 14:59:44 ?         ?
        HDREDIT2 2.5.1  2011/08/18 17:14:23 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2011/08/11 16:24:49 20
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  0.40
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Secondary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.50
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to   109.77 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT 2011/08/15 09:38:59
            142 records were deleted in this editing session.
         No data values were changed.
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2011/08/18 14:59:13
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Secondary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Status:Pump
          Descent_Rate [m/s]
          Salinity:T1:C1 [PSS-78]
          Flag
        -CHANGE units:
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2011/08/18 17:14:23
         Applied edit header: Q:\Cruise_Data_Processing\2010-18\Processing\doc\2010-18-hdr-leg1.txt
         Channel  1: Pressure [decibar]
           Units:  dbars ==> decibar
           Format: F10.3 ==> F7.1
         Channel  4: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  5: Oxygen:Dissolved:SBE [umol/kg]
           Format: F7.2 ==> F6.1
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\DATA\2010\2010-18\2010-18-0060.hex
      Software Version Seasave V 7.19
      Temperature SN = 4054
      Conductivity SN = 3321
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Oct 13 2010 14:05:54
      NMEA Latitude = 48 17.83 N
      NMEA Longitude = 123 36.34 W
      NMEA UTC (Time) = Oct 13 2010  14:04:06
      Store Lat/Lon Data = Append to Every Scan
       W.E.Ricker 2010-18
       Station: JF 01
       Depth(m): 132
    # nquan = 13
    # nvalues = 10577
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = pumps: Pump Status
    # name 8 = dz/dtM: Descent Rate [m/s]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = sal00: Salinity, Practical [PSU]
    # name 11 = sal11: Salinity, Practical, 2 [PSU]
    # name 12 = flag: flag
    # span 0 =          1,      10577
    # span 1 =      0.443,    119.771
    # span 2 =     9.0059,     9.5670
    # span 3 =     9.0045,     9.5656
    # span 4 =   3.433846,   3.445572
    # span 5 =   3.429912,   3.445871
    # span 6 =     1.6227,     1.8217
    # span 7 =          0,          1
    # span 8 =     -1.214,      1.125
    # span 9 =    3.30652,    3.80465
    # span 10 =    31.5703,    32.1317
    # span 11 =    31.5282,    32.1315
    # span 12 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Oct 13 2010 14:04:06 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4054</SerialNumber>
    #       <CalibrationDate>29-Dec-10 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.38606214e-003</G>
    #       <H>6.43815959e-004</H>
    #       <I>2.28358480e-005</I>
    #       <J>2.05028550e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3321</SerialNumber>
    #       <CalibrationDate>29-dec-2010</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.95131588e+000</G>
    #         <H>1.44518593e+000</H>
    #         <I>7.46215400e-004</I>
    #         <J>2.39047302e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0585</SerialNumber>
    #       <CalibrationDate>10-feb-11 </CalibrationDate>
    #       <C1>-3.951550e+004</C1>
    #       <C2>-4.415130e-001</C2>
    #       <C3>1.282560e-002</C3>
    #       <D1>3.560600e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.030045e+001</T1>
    #       <T2>-4.415690e-004</T2>
    #       <T3>4.342710e-006</T3>
    #       <T4>1.736800e-009</T4>
    #       <Slope>0.99992000</Slope>
    #       <Offset>-1.74950</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.288270e-002</AD590M>
    #       <AD590B>-8.164490e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4700</SerialNumber>
    #       <CalibrationDate>29-Dec-10 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.34734844e-003</G>
    #       <H>6.38032358e-004</H>
    #       <I>2.09765828e-005</I>
    #       <J>1.76787001e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>1766</SerialNumber>
    #       <CalibrationDate>28-Dec-10 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-4.13546819e+000</G>
    #         <H>4.88372744e-001</H>
    #         <I>-5.99437046e-004</I>
    #         <J>5.18753457e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0997</SerialNumber>
    #       <CalibrationDate>24-Dec-10p</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3190e-001</Soc>
    #         <offset>-0.4877</offset>
    #         <A> 5.8449e-004</A>
    #         <B> 1.0171e-004</B>
    #         <C>-2.3810e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92630e-004</D1>
    #         <D2>-4.64800e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.5400</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, Free -->
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 11 2011 13:37:05, 7.21d [datcnv_vars = 9]
    # datcnv_in = Q:\Cruise_Data_Processing\2010-18\RAW\CTD\2010-18-0113.hex Q:\Crui
    se_Data_Processing\2010-18\Processing\doc\2010-18-ctd1-postcal.con
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Aug 11 2011 13:40:12, 7.21d
    # wildedit_in = Q:\Cruise_Data_Processing\2010-18\Processing\convert\2010-18-011
    3.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Aug 11 2011 15:15:07, 7.21d
    # alignctd_in = Q:\Cruise_Data_Processing\2010-18\Processing\wildedit\2010-18-01
    13.cnv
    # alignctd_adv = sbeox0V 4.000
    # celltm_date = Aug 11 2011 15:45:41, 7.21d
    # celltm_in = Q:\Cruise_Data_Processing\2010-18\Processing\Align\2010-18-0113.cn
    v
    # celltm_alpha = 0.0300, 0.0300
    # celltm_tau = 9.0000, 9.0000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Aug 11 2011 16:04:07, 7.21d [derive_vars = 3]
    # Derive_in = Q:\Cruise_Data_Processing\2010-18\Processing\celltm\2010-18-0113.c
    nv Q:\Cruise_Data_Processing\2010-18\Processing\doc\2010-18-ctd1-postcal.con
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = no
    # file_type = ascii
     END*
    CTDEDIT was used to remove records near the top and bottom of the cast;
     salinity was cleaned lightly.
    *****************************************************************************************
    The SBE Dissolved Oxygen data are nominal and unedited except that some records
    were removed in editing temperature and salinity.

    Post-cruise calibrations were used for all sensors on the CTD.

    No estimate can be made of the precision of the SBE Dissolved Oxygen channel since there
    was no DO sampling. The availability of a post-cruise calibration in late December 2010
    should minimize errors due to calibration drift, but not those due to slow response time.
    *****************************************************************************************
!--1--- ---2---- ---3---- --4--- --5-- -6--
!Pressu Temperat Salinity Oxygen Oxyge Numb
!re     ure:     :T0:C0   :      n:    er_o
!       Primary           Dissol Disso ~bin
!                         ved:   lved: _rec
!                         SBE    SBE   ords
!------ -------- -------- ------ ----- ----
*END OF HEADER
    5.2   9.5295  31.6484   3.66 159.7   33
    6.0   9.4747  31.6969   3.64 158.6   49
    7.0   9.4709  31.6995   3.62 157.8   40
    8.0   9.4619  31.7112   3.61 157.3   32
    9.0   9.4594  31.7132   3.60 157.0   38
   10.0   9.4558  31.7144   3.60 156.9   43
   11.0   9.4531  31.7159   3.60 156.8   35
   12.0   9.4543  31.7156   3.60 156.7   33
   13.0   9.4432  31.7224   3.59 156.5   31
   14.0   9.4312  31.7316   3.59 156.4   31
   15.0   9.4303  31.7317   3.58 156.2   32
   16.0   9.4239  31.7371   3.58 156.0   38
   17.0   9.4175  31.7429   3.57 155.7   37
   18.0   9.4098  31.7504   3.57 155.4   35
   19.0   9.3605  31.8018   3.56 155.2   33
   20.0   9.3487  31.8126   3.56 155.1   30
   21.0   9.3513  31.8102   3.56 155.0   30
   22.0   9.3522  31.8095   3.56 154.9   30
   23.0   9.3551  31.8071   3.55 154.8   31
   24.0   9.3613  31.8023   3.55 154.7   32
   25.0   9.3595  31.8040   3.55 154.7   31
   26.0   9.3520  31.8102   3.55 154.7   31
   27.0   9.3483  31.8133   3.55 154.7   31
   28.0   9.3467  31.8148   3.55 154.6   31
   29.0   9.3525  31.8105   3.55 154.5   29
   30.0   9.3500  31.8124   3.55 154.6   27
   31.0   9.3599  31.8041   3.55 154.8   25
   32.0   9.3642  31.8008   3.56 154.9   26
   33.0   9.3706  31.7958   3.56 155.0   29
   34.0   9.3705  31.7963   3.56 155.0   31
   35.0   9.3756  31.7927   3.56 154.9   30
   36.0   9.3722  31.7955   3.56 154.9   31
   37.0   9.3710  31.7965   3.56 154.9   31
   38.0   9.3607  31.8045   3.56 155.0   30
   39.0   9.3568  31.8075   3.56 155.0   29
   40.0   9.3574  31.8074   3.56 154.9   26
   41.0   9.3593  31.8062   3.55 154.8   24
   42.0   9.3534  31.8097   3.55 154.8   24
   43.0   9.3542  31.8092   3.55 154.7   27
   44.0   9.3449  31.8151   3.55 154.5   30
   45.0   9.3379  31.8203   3.54 154.1   35
   46.0   9.3173  31.8358   3.53 153.6   33
   47.0   9.3099  31.8399   3.52 153.2   29
   48.0   9.3055  31.8433   3.51 153.0   27
   49.0   9.2873  31.8563   3.51 152.8   25
   50.0   9.2877  31.8559   3.51 152.7   28
   51.0   9.2898  31.8546   3.50 152.6   29
   52.0   9.2983  31.8486   3.50 152.7   31
   53.0   9.2932  31.8524   3.51 152.7   35
   54.0   9.2928  31.8528   3.51 152.8   31
   55.0   9.2927  31.8532   3.51 152.9   26
   56.0   9.3019  31.8467   3.50 152.6   28
   57.0   9.2857  31.8585   3.50 152.4   29
   58.0   9.2671  31.8709   3.49 152.1   31
   59.0   9.2651  31.8714   3.48 151.8   32
   60.0   9.2705  31.8677   3.48 151.7   31
   61.0   9.2654  31.8736   3.48 151.6   30
   62.0   9.2604  31.8799   3.48 151.6   27
   63.0   9.2623  31.8766   3.48 151.6   25
   64.0   9.2598  31.8804   3.48 151.5   25
   65.0   9.2596  31.8817   3.48 151.4   27
   66.0   9.2598  31.8813   3.48 151.4   30
   67.0   9.2629  31.8767   3.48 151.6   31
   68.0   9.2632  31.8767   3.48 151.6   30
   69.0   9.2622  31.8780   3.48 151.5   28
   70.0   9.2627  31.8776   3.48 151.5   30
   71.0   9.2626  31.8782   3.48 151.5   29
   72.0   9.2636  31.8768   3.48 151.5   26
   73.0   9.2639  31.8768   3.48 151.5   25
   74.0   9.2638  31.8770   3.48 151.6   25
   75.0   9.2630  31.8783   3.48 151.6   27
   76.0   9.2616  31.8805   3.48 151.7   29
   77.0   9.2614  31.8808   3.48 151.7   28
   78.0   9.2627  31.8791   3.48 151.6   28
   79.0   9.2632  31.8782   3.48 151.7   30
   80.0   9.2625  31.8801   3.48 151.7   29
   81.0   9.2626  31.8799   3.48 151.6   27
   82.0   9.2622  31.8805   3.48 151.7   28
   83.0   9.2629  31.8791   3.48 151.6   23
   84.0   9.2636  31.8775   3.48 151.7   26
   85.0   9.2640  31.8819   3.48 151.8   26
   86.0   9.2646  31.8831   3.48 151.8   26
   87.0   9.2638  31.8849   3.49 151.9   28
   88.0   9.2627  31.8865   3.49 152.0   28
   89.0   9.2638  31.8864   3.49 152.0   29
   90.0   9.2647  31.8867   3.49 152.0   29
   91.0   9.2558  31.9000   3.49 152.0   26
   92.0   9.2546  31.9014   3.49 152.0   32
   93.0   9.2505  31.9099   3.49 152.0   30
   94.0   9.2414  31.9195   3.49 151.9   28
   95.0   9.2396  31.9215   3.49 151.9   29
   96.0   9.2411  31.9203   3.49 152.0   30
   97.0   9.2402  31.9218   3.49 152.0   30
   98.0   9.2401  31.9223   3.48 151.8   33
   99.0   9.2261  31.9371   3.47 151.4   33
  100.0   9.2116  31.9514   3.46 150.9   34
  101.0   9.1730  31.9847   3.45 150.3   33
  102.0   9.1577  31.9977   3.44 149.9   30
  103.0   9.1559  31.9993   3.43 149.5   28
  104.0   9.1485  32.0056   3.41 148.6   29
  105.0   9.0850  32.0608   3.39 147.7   33
  106.0   9.0468  32.0931   3.37 146.7   37
  107.0   9.0321  32.1056   3.36 146.3   35
  108.0   9.0502  32.0893   3.36 146.2   29
  109.0   9.0613  32.0802   3.36 146.2   30
  110.0   9.0569  32.0841   3.35 146.0   31
  111.0   9.0474  32.0922   3.35 145.8   34
  112.0   9.0473  32.0925   3.35 145.7   34
  113.0   9.0509  32.0895   3.34 145.5   32
  113.9   9.0456  32.0942   3.34 145.3   27
  116.4   9.0410  32.1006   3.33 144.9   10
  117.0   9.0379  32.1041   3.33 145.0   62
  118.0   9.0366  32.1056   3.33 145.1   42
  119.0   9.0351  32.1072   3.33 145.1   39
  119.6   9.0344  32.1079   3.33 145.1   11