*2011/08/18 17:14:21.81
*IOS HEADER VERSION 1.8  2007/05/25 2007/05/25

*FILE
    START TIME          : UTC 2010/10/05 20:38:40.000
    TIME INCREMENT      : 0 0 0 0.416667E-01 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 117
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : 41B2B15E
    NUMBER OF CHANNELS  : 6

    $TABLE: CHANNELS
    ! No Name                    Units           Minimum        Maximum
    !--- ----------------------- --------------- -------------- --------------
       1 Pressure                decibar         5.38           120.75
       2 Temperature:Primary     'deg C (ITS90)' 8.1528         10.4223
       3 Salinity:T0:C0          PSS-78          30.8639        32.4462
       4 Oxygen:Dissolved:SBE    mL/L            3.016          5.071
       5 Oxygen:Dissolved:SBE    umol/kg         131.3273       221.1525
       6 Number_of_bin_records   n/a             18             42
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        7  F       ' '     1
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '        9  F       ' '     4
       4  -99   ' '        7  F       ' '     2
       5  -99   ' '        6  F       ' '     1
       6  ' '   ' '        5  I       I       0
    $END
    $REMARKS
        This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2010-18\Pro
    $END

*ADMINISTRATION
    MISSION             : 2010-18
    AGENCY              : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C.
    COUNTRY             : Canada
    PROJECT             : High Seas Salmon
    SCIENTIST           : Trudel M.
    PLATFORM            : W.E. Ricker

*LOCATION
    GEOGRAPHIC AREA     : Strait of Georgia/Juan de Fuca Strait/WCVI/BC Inlets
    STATION             : QCST05
    EVENT NUMBER        : 27
    LATITUDE            :  50  37.41000 N  ! (deg min)
    LONGITUDE           : 126  47.76000 W  ! (deg min)
    WATER DEPTH         : 130

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0585
    $REMARKS
        SOFTWARE VERSION SEASAVE V 7.19
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  3.1    2011/08/11 16:09:24      8315      8315
        CLEAN    5.0.3  2011/08/11 16:25:12      8287      8287
        SHIFTDAT 3.4    2011/08/12 13:18:54      8287      8287
        SHIFTDAT 3.4    2011/08/12 13:29:10      8287      8287
        DELETE   6.3    2011/08/12 13:39:13      8287      3382
        CTDEDIT  4.61   2011/08/13 15:24:54      3382      3300
        FILTERS  4.3    2011/08/18 14:30:51      3300      3300
        BINAVE   4.1.1  2011/08/18 14:32:49      3300       117
        REMOVECH 8.0    2011/08/18 14:59:10       117       117
        CHGUNITS 3.0    2011/08/18 14:59:28       117       117
        REORDER  1.3    2011/08/18 14:59:42 ?         ?
        HDREDIT2 2.5.1  2011/08/18 17:14:21 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2011/08/11 16:24:49 20
         Interpolation by   Record Number, in Pressure
         Set event to last  4 characters of file name
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Primary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  0.40
         Salinity was recalculated after shift
        -The following SHIFT parameters were used.
         Shift Channel: Conductivity:Secondary
         # of Records to Advance (-ve for Delay):
         At REC#     0 Shift=  1.50
         Salinity was recalculated after shift
        -The following DELETE parameters were used:
         Surface Record Removal: Last Press Min
           Maximum Surface Pressure (relative):      10.00
           Surface Swell Pressure Tolerance:       1.00
         Pressure filtered over width:   15
         Swells deleted. Warning message if pressure difference of      2.00
         Drop rates <   0.30m/s (calculated over  11 points) will be deleted.
         Drop rate applies in the range    10.00 to   111.08 dbars
         Sample interval (from FILE section of header) =     0.042 seconds.
        -CTDEDIT 2011/08/13 15:24:54
             82 records were deleted in this editing session.
             13 changes in channel Salinity:T0:C0
        -The following FILTER parameters were used.
         Median filter was used.
         Filter width =   11
         The following channel(s) were filtered.
           Fluorescence:Seapoint
        -The following BINAVE parameters were used:
         Bin channel = Pressure
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Average value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -REMOVECH 2011/08/18 14:59:10
         The following CHANNEL(S) were removed:
          Scan_Number
          Temperature:Secondary [deg C (ITS90)]
          Conductivity:Primary [S/m]
          Conductivity:Secondary [S/m]
          Oxygen:Voltage:SBE [volts]
          Status:Pump
          Descent_Rate [m/s]
          Salinity:T1:C1 [PSS-78]
          Flag
        -CHANGE units:
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2011/08/18 17:14:21
         Applied edit header: Q:\Cruise_Data_Processing\2010-18\Processing\doc\2010-18-hdr-leg1.txt
         Channel  1: Pressure [decibar]
           Units:  dbars ==> decibar
           Format: F10.3 ==> F7.1
         Channel  4: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
         Channel  5: Oxygen:Dissolved:SBE [umol/kg]
           Format: F7.2 ==> F6.1
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\DATA\2010\2010-18\2010-18-0027.hex
      Software Version Seasave V 7.19
      Temperature SN = 4054
      Conductivity SN = 3321
      Number of Bytes Per Scan = 37
      Number of Voltage Words = 4
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Oct 05 2010 20:40:23
      NMEA Latitude = 50 37.41 N
      NMEA Longitude = 126 47.76 W
      NMEA UTC (Time) = Oct 05 2010  20:38:40
      Store Lat/Lon Data = Append to Every Scan
       W.E.Ricker 2010-18
       Station: QCST05
       Depth(m): 130
    # nquan = 13
    # nvalues = 8315
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = t090C: Temperature [ITS-90, deg C]
    # name 3 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 4 = c0S/m: Conductivity [S/m]
    # name 5 = c1S/m: Conductivity, 2 [S/m]
    # name 6 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 7 = pumps: Pump Status
    # name 8 = dz/dtM: Descent Rate [m/s]
    # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
    # name 10 = sal00: Salinity, Practical [PSU]
    # name 11 = sal11: Salinity, Practical, 2 [PSU]
    # name 12 = flag: flag
    # span 0 =          1,       8315
    # span 1 =      4.194,    121.083
    # span 2 =     8.1520,    10.5017
    # span 3 =     8.1552,    10.5159
    # span 4 =   3.382460,   3.439658
    # span 5 =   3.382526,   3.439498
    # span 6 =     1.4957,     2.3541
    # span 7 =          0,          1
    # span 8 =     -1.226,      1.161
    # span 9 =    2.98598,    5.26239
    # span 10 =    30.5237,    32.4467
    # span 11 =    30.4566,    32.4481
    # span 12 = 0.0000e+00, 0.0000e+00
    # interval = seconds: 0.0416667
    # start_time = Oct 05 2010 20:38:40 [NMEA time, header]
    # bad_flag = -9.990e-29
    # <Sensors count="13" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4054</SerialNumber>
    #       <CalibrationDate>29-Dec-10 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.38606214e-003</G>
    #       <H>6.43815959e-004</H>
    #       <I>2.28358480e-005</I>
    #       <J>2.05028550e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>3321</SerialNumber>
    #       <CalibrationDate>29-dec-2010</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.95131588e+000</G>
    #         <H>1.44518593e+000</H>
    #         <I>7.46215400e-004</I>
    #         <J>2.39047302e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>0585</SerialNumber>
    #       <CalibrationDate>10-feb-11 </CalibrationDate>
    #       <C1>-3.951550e+004</C1>
    #       <C2>-4.415130e-001</C2>
    #       <C3>1.282560e-002</C3>
    #       <D1>3.560600e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.030045e+001</T1>
    #       <T2>-4.415690e-004</T2>
    #       <T3>4.342710e-006</T3>
    #       <T4>1.736800e-009</T4>
    #       <Slope>0.99992000</Slope>
    #       <Offset>-1.74950</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.288270e-002</AD590M>
    #       <AD590B>-8.164490e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4700</SerialNumber>
    #       <CalibrationDate>29-Dec-10 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.34734844e-003</G>
    #       <H>6.38032358e-004</H>
    #       <I>2.09765828e-005</I>
    #       <J>1.76787001e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>1766</SerialNumber>
    #       <CalibrationDate>28-Dec-10 </CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-4.13546819e+000</G>
    #         <H>4.88372744e-001</H>
    #         <I>-5.99437046e-004</I>
    #         <J>5.18753457e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>0997</SerialNumber>
    #       <CalibrationDate>24-Dec-10p</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>4.3190e-001</Soc>
    #         <offset>-0.4877</offset>
    #         <A> 5.8449e-004</A>
    #         <B> 1.0171e-004</B>
    #         <C>-2.3810e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92630e-004</D1>
    #         <D2>-4.64800e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.5400</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Free -->
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Free -->
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Free -->
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Free -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, Free -->
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, Free -->
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 11 2011 13:36:15, 7.21d [datcnv_vars = 9]
    # datcnv_in = Q:\Cruise_Data_Processing\2010-18\RAW\CTD\2010-18-0027.hex Q:\Crui
    se_Data_Processing\2010-18\Processing\doc\2010-18-ctd1-postcal.con
    # datcnv_skipover = 0
    # datcnv_ox_hysteresis_correction = no
    # wildedit_date = Aug 11 2011 13:39:47, 7.21d
    # wildedit_in = Q:\Cruise_Data_Processing\2010-18\Processing\convert\2010-18-002
    7.cnv
    # wildedit_pass1_nstd = 2.0
    # wildedit_pass2_nstd = 5.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 50
    # wildedit_vars = prDM t090C t190C c0S/m c1S/m
    # wildedit_excl_bad_scans = yes
    # alignctd_date = Aug 11 2011 15:14:42, 7.21d
    # alignctd_in = Q:\Cruise_Data_Processing\2010-18\Processing\wildedit\2010-18-00
    27.cnv
    # alignctd_adv = sbeox0V 4.000
    # celltm_date = Aug 11 2011 15:45:17, 7.21d
    # celltm_in = Q:\Cruise_Data_Processing\2010-18\Processing\Align\2010-18-0027.cn
    v
    # celltm_alpha = 0.0300, 0.0300
    # celltm_tau = 9.0000, 9.0000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Aug 11 2011 16:03:35, 7.21d [derive_vars = 3]
    # Derive_in = Q:\Cruise_Data_Processing\2010-18\Processing\celltm\2010-18-0027.c
    nv Q:\Cruise_Data_Processing\2010-18\Processing\doc\2010-18-ctd1-postcal.con
    # derive_time_window_docdt = seconds: 2
    # derive_ox_tau_correction = no
    # file_type = ascii
     END*
    CTDEDIT was used to remove some surface records; salinity was cleaned lightly.
    *****************************************************************************************
    The SBE Dissolved Oxygen data are nominal and unedited except that some records
    were removed in editing temperature and salinity.

    Post-cruise calibrations were used for all sensors on the CTD.

    No estimate can be made of the precision of the SBE Dissolved Oxygen channel since there
    was no DO sampling. The availability of a post-cruise calibration in late December 2010
    should minimize errors due to calibration drift, but not those due to slow response time.
    *****************************************************************************************
!--1--- ---2---- ---3---- --4--- --5-- -6--
!Pressu Temperat Salinity Oxygen Oxyge Numb
!re     ure:     :T0:C0   :      n:    er_o
!       Primary           Dissol Disso ~bin
!                         ved:   lved: _rec
!                         SBE    SBE   ords
!------ -------- -------- ------ ----- ----
*END OF HEADER
    5.4  10.4223  30.8639   5.07 221.1   18
    6.0  10.4184  30.8687   5.04 219.9   36
    7.0  10.3786  30.9063   4.93 214.9   42
    8.0  10.1461  31.0426   4.76 207.4   42
    9.0   9.8592  31.1542   4.64 202.5   34
   10.0   9.8755  31.1458   4.57 199.4   37
   11.0   9.8787  31.1406   4.51 196.6   34
   12.0   9.7891  31.1804   4.43 192.9   36
   13.0   9.6480  31.2380   4.32 188.2   35
   14.0   9.4602  31.3135   4.22 184.2   35
   15.0   9.3769  31.3419   4.16 181.5   36
   16.0   9.3679  31.3416   4.12 179.8   33
   17.0   9.3593  31.3423   4.10 178.6   33
   18.0   9.3460  31.3431   4.07 177.4   33
   19.0   9.3163  31.3468   4.05 176.4   34
   20.0   9.2989  31.3545   4.02 175.1   33
   21.0   9.2438  31.3675   3.99 173.8   33
   22.0   9.1986  31.3754   3.97 172.9   31
   23.0   9.1924  31.3751   3.94 171.9   33
   24.0   9.1759  31.4033   3.92 170.9   35
   25.0   9.1580  31.4659   3.90 170.1   35
   26.0   9.1552  31.4776   3.89 169.6   35
   27.0   9.1541  31.4801   3.88 169.1   32
   28.0   9.1450  31.4967   3.87 168.7   28
   29.0   9.1260  31.5477   3.87 168.7   33
   30.0   9.1264  31.5902   3.88 168.9   33
   31.0   9.1296  31.6007   3.87 168.8   32
   32.0   9.1296  31.5996   3.87 168.7   32
   33.0   9.1269  31.6067   3.87 168.6   31
   34.0   9.1254  31.6119   3.87 168.6   30
   35.0   9.1241  31.6130   3.87 168.6   30
   36.0   9.1235  31.6128   3.87 168.5   30
   37.0   9.1199  31.6185   3.87 168.6   30
   38.0   9.1194  31.6314   3.86 168.4   30
   39.0   9.1272  31.6767   3.82 166.3   31
   40.0   8.9503  31.8501   3.75 163.4   30
   41.0   8.8088  31.9086   3.69 160.8   31
   42.0   8.7680  31.9320   3.64 158.5   30
   43.0   8.7522  31.9403   3.59 156.6   30
   44.0   8.7041  31.9767   3.57 155.3   31
   45.0   8.6963  31.9900   3.55 154.5   30
   46.0   8.6949  31.9939   3.53 153.9   31
   47.0   8.6958  31.9941   3.53 153.6   30
   48.0   8.6951  31.9944   3.52 153.4   31
   49.0   8.6962  31.9885   3.52 153.3   31
   50.0   8.6986  32.0028   3.52 153.3   30
   51.0   8.7013  32.0073   3.52 153.4   30
   52.0   8.6994  32.0114   3.52 153.4   29
   53.0   8.6957  32.0243   3.52 153.5   30
   54.0   8.6924  32.0404   3.52 153.4   28
   55.0   8.6717  32.0833   3.52 153.4   28
   56.0   8.6713  32.0844   3.52 153.1   27
   57.0   8.6646  32.0893   3.51 152.9   28
   58.0   8.6597  32.0921   3.51 152.7   28
   59.0   8.6450  32.1091   3.50 152.4   29
   60.0   8.6413  32.1098   3.49 152.1   27
   61.0   8.6434  32.1054   3.48 151.6   28
   62.0   8.6446  32.1023   3.46 150.5   28
   63.0   8.5645  32.1595   3.43 149.4   26
   64.0   8.5492  32.1698   3.40 147.9   27
   65.0   8.4836  32.2126   3.37 146.6   26
   66.0   8.4604  32.2270   3.34 145.6   26
   67.0   8.4637  32.2245   3.33 144.8   26
   68.0   8.4511  32.2314   3.31 144.2   26
   69.0   8.4521  32.2306   3.30 143.9   27
   70.0   8.4503  32.2319   3.30 143.7   26
   71.0   8.4493  32.2337   3.30 143.5   26
   72.0   8.4579  32.2303   3.29 143.3   26
   73.0   8.4466  32.2359   3.29 143.2   25
   74.0   8.4478  32.2352   3.29 143.2   26
   75.0   8.4464  32.2364   3.29 143.1   25
   76.0   8.4448  32.2372   3.28 143.0   24
   77.0   8.4473  32.2364   3.28 142.9   23
   78.0   8.4455  32.2380   3.28 142.9   24
   79.0   8.4463  32.2382   3.28 142.7   25
   80.0   8.4448  32.2391   3.28 142.6   24
   81.0   8.4426  32.2408   3.27 142.6   26
   82.0   8.4405  32.2419   3.27 142.5   24
   83.0   8.4415  32.2428   3.27 142.2   25
   84.0   8.4312  32.2527   3.26 142.1   25
   85.0   8.4325  32.2518   3.26 142.1   24
   86.0   8.4317  32.2526   3.26 142.1   26
   87.0   8.4332  32.2520   3.26 142.0   25
   88.0   8.4299  32.2545   3.26 141.9   28
   89.0   8.4253  32.2567   3.25 141.7   27
   90.0   8.4281  32.2536   3.24 141.3   25
   91.0   8.4054  32.2620   3.24 141.0   24
   92.0   8.3987  32.2647   3.23 140.8   25
   93.0   8.4035  32.2626   3.23 140.7   24
   94.0   8.4065  32.2621   3.23 140.8   24
   95.0   8.4098  32.2621   3.23 140.9   25
   96.0   8.4142  32.2606   3.24 140.9   24
   97.0   8.4159  32.2601   3.24 140.9   26
   98.0   8.4168  32.2632   3.24 141.0   26
   99.0   8.4137  32.2667   3.24 141.0   26
  100.0   8.4140  32.2673   3.24 141.0   26
  101.0   8.4153  32.2664   3.23 140.9   25
  102.0   8.4160  32.2660   3.23 140.7   23
  103.0   8.3947  32.2773   3.23 140.5   21
  104.0   8.3891  32.2808   3.22 140.2   23
  105.0   8.3875  32.2820   3.22 140.1   23
  106.0   8.3899  32.2807   3.21 140.0   23
  107.0   8.3798  32.2865   3.21 139.9   24
  108.0   8.3827  32.2860   3.21 139.9   24
  109.0   8.3968  32.2775   3.21 140.0   23
  110.0   8.3959  32.2779   3.21 140.0   25
  111.0   8.3999  32.2763   3.20 139.6   23
  112.0   8.3801  32.2887   3.18 138.7   25
  113.0   8.3206  32.3257   3.16 137.7   24
  114.0   8.2975  32.3396   3.14 136.9   23
  115.0   8.2742  32.3551   3.13 136.2   24
  116.0   8.2712  32.3566   3.12 135.8   24
  117.0   8.2668  32.3595   3.11 135.3   24
  118.0   8.2784  32.3516   3.08 134.2   24
  119.0   8.2225  32.3937   3.06 133.0   25
  120.0   8.1656  32.4364   3.03 132.0   26
  120.8   8.1528  32.4462   3.02 131.3   19