*2014/11/20 09:57:06.43 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2010/06/17 23:04:24.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 19 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 231E34F0 NUMBER OF CHANNELS : 13 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 543 561 2 Pressure decibar 1399.2 4315.5 3 Temperature:Secondary 'deg C (ITS90)' 1.4973 2.4082 4 Transmissivity %/metre 58 60.5 5 Fluorescence:URU:Seapoint mg/m^3 0.35E-01 0.44E-01 6 Oxygen:Dissolved:SBE mL/L 0.26 2.76 7 Oxygen:Dissolved:SBE umol/kg 11.2 119.8 8 Salinity:T1:C1 PSS-78 34.4851 34.683 9 Number_of_bin_records n/a 56 121 10 Bottle_Number n/a 2 20 11 Bottle:Firing_Sequence n/a 1 19 12 Salinity:Bottle PSS-78 34.485 34.6872 13 Flag:Salinity:Bottle n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 6 F ' ' 1 5 -99 ' ' 8 F ' ' 3 6 -99 ' ' 7 F ' ' 2 7 -99 ' ' 6 F ' ' 1 8 -99 ' ' 9 F ' ' 4 9 ' ' ' ' 5 I I 0 10 -99 ' ' 3 I I 0 11 -99 ' ' 3 I I 0 12 -99 ' ' 9 F R4 4 13 0 ' ' 3 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2010-13 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : P26 EVENT NUMBER : 72 LATITUDE : 50 0.02000 N ! (deg min) LONGITUDE : 145 0.01000 W ! (deg min) WATER DEPTH : 4252 ALTIMETER (M) : 11.06 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0506 LOCATION : Mid-ship ! custom item $REMARKS SOFTWARE VERSION SEASAVE V 7.18C $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2010/08/24 16:15:39 1836 1836 CLEAN 5.0.2 2010/08/24 16:16:11 ? ? ADDSAMP 3.4 2010/08/27 11:52:55 1836 1836 BINAVE 4.1.1 2010/08/27 11:53:14 1836 19 CALIB 11.7 2010/09/03 11:34:51 19 19 MERGE 3.4 2010/10/20 16:06:04 19 19 CLEAN 5.0.2 2010/10/20 16:06:11 ? ? CALIB 11.7 2010/11/09 11:43:03 19 19 SORT 3.5 2010/11/09 11:43:15 19 19 REMOVECH 8.0 2010/11/09 11:45:28 19 19 CHGUNITS 3.0 2010/11/09 11:45:46 19 19 REORDER 1.2.1 2010/11/09 11:45:53 ? ? HDREDIT2 2.5.1 2010/11/10 15:51:32 ? ? HDREDIT2 2.5.1 2010/11/15 17:37:05 ? ? CALIB 11.7 2013/06/04 13:14:16 19 19 HDREDIT2 2.6 2013/07/08 08:50:23 ? ? CHANGE_FLAGS 1.0 2013/07/29 14:31:31 19 19 CHANGE_FLAGS 2.0 2014/11/20 09:57:06 19 19 $END $REMARKS -CLEAN functions: 2010/08/24 16:15:49 20 Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data_Processing\2010-13\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -CALIB parameters: 2010/09/03 11:34:51 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2010-13\Processing\doc\2010-13-recal-press.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.0000000E+00 0.9998800E+00 -The following MERGE parameters were used: 2010/10/20 16:06:01 2010/10/20 16:06:01 2010/10/20 16:06: Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Phaeo-Pigment:Extracted, Flag:Phaeo-Pigment:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Ammonium, Flag:Ammonium, Dimethyl_Sulphide, Flag:Dimethyl_Sulphide Primary file : Q:\Cruise_Data_Processing\2010-13\Processing\hydro\2010-13-0072.samavg Secondary file: Q:\Cruise_Data_Processing\2010-13\Processing\hydro\2010-13-0072.mrgcln1 -CLEAN functions: 2010/10/20 16:06:09 20 Remove Sea-Bird comments from the header. -CALIB parameters: 2010/11/09 11:43:03 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2010-13\Processing\doc\2010-13-recal-bottle.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Transmissivity %/metre 10 0.0000000E+00 0.2500000E+01 17 Salinity:T1:C1 PSS-78 10 -0.2500000E-02 0.1000000E+01 18 Oxygen:Dissolved:SBE mL/L 10 0.5700000E-02 0.1041400E+01 -SORT parameters: 2010/11/09 11:43:15 Sorted in ascending order of channel Pressure [dbars] -REMOVECH 2010/11/09 11:45:28 The following CHANNEL(S) were removed: Scan_Number Temperature:Primary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] PAR [uE/m^2/sec] pH:SBE [pH Units] Status:Pump Descent_Rate [m/s] Altimeter [metres] Salinity:T0:C0 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L to umol/kg -HEADER EDITS: 2010/11/10 15:51:32 Applied edit header: Q:\Cruise_Data_Processing\2010-13\Processing\doc\2010-13-bot-hdr.txt Channel 2: Pressure [decibar] Units: dbars ==> decibar Channel 5: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 6: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 13: Flag:Salinity:Bottle [n/a] Units: ==> n/a -HEADER EDITS: 2010/11/15 17:37:05 Channel 11: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 10: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number -CALIB parameters: 2013/06/04 13:14:16 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = C:\DATA\Nutrients\doc\Nutrients-recal1.ccf WARNING: No calibration done on file C:\Data\Nutrients\2010-13\2010-13-0072.cor1 -HEADER EDITS: 2013/07/08 08:50:23 Applied edit header: C:\DATA\Nutrients\doc\headedit-correction.txt $END *COMMENTS Comments from secondary file: Q:\Cruise_Data_Processing\2010-13\Processing\hydro\2010-13-0072.mrgcln1 ----------------------------------------------------------------------- Comments from secondary file: Q:\Cruise_Data_Processing\2010-13\Processing\hydro\2010-13-0072.sal ------------------------------------------------------------------- Sample_Number 547: SAL: SALT CRYSTALS AROUND RIM, but looks ok in COMPARE. Analysis methods: - ----------------- Chlorophyll and Phaeo-Pigments samples were analyzed at sea using a Chemistry Turner Designs 10AU fluorometer which was calibrated on May 12, 2009 using pure chlorophyll a. Chlorophyll and Phaeo-Pigments precision was determined by analyzing replicate samples drawn from one Niskin. For details see worksheet “Precision” in file QF 2010-13 CHLChauv.xls. Oxygen samples were analyzed at sea using an automated Winkler titration system with modifications based on Carpenter (1965) and adhering to WOCE protocols (Culberson 1991). The titration system consists of a Brinkmann 665 Dosimat, a UV light source and a UV detector with a 365nm filter custom built by Scripps Institution of Oceanography. For details including a duplicate analysis, see document 2010-13oxy.xls. Salinity samples were collected in glass bottles and analyzed at sea using a Guildline Portasal (#58879) or at IOS on a Guildline model 8400B Autosal standardized with IAPSO standard seawater. See file 2010-13sal.xls for Autosal data and 2010-13 P8 Sal.txt and 2010-13-P16.txt for Portasal data. For information on precision see 2010-13-sal-duplicates.xls. Nutrient samples were collected in plastic tubes. Most samples were analyzed frozen at IOS using an Astoria autoanalyzer following methods described in Barwell-Clarke and Whitney (1996). Deep silicate samples (400m and below) were analyzed cool at IOS. For full data and details on nutrient duplicates and precision see file QF2010-13nuts.xls. NOTE: FROZEN SAMPLES WERE ACCIDENTALLY THAWED FOR 2 DAYS AT ROOM TEMPERATURE THEN STORED COOL UNTIL ANALYZED. The minimum detectable level for DMS is 0.10 nM, so “0” values should be interpreted as <0.10. For details on the collection and analysis of the DMS data see file 2010-13 DMS Report.doc and for data see DMS 2010-13 summary.xls. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. Culberson C.H. (1991) Dissolved oxygen. In WOCE Operations Manual. Volume 3: The Observational Program. Section 3.1: WOCE Hydrographic Program. Part 3.1.3: WHP Operations and Methods. WHP Office Report WHPO 91-1 / WOCE Report No. 68/91. 3. Barwell-Clarke, J. and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. ----------------------------------------------------------------------------------- ********************************************************************************** Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by correction factor 2.5, which was based on the assumption that deep offshore transmissivity should be about 62%/m. For details on the transmissometer post-processing see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should still be considered nominal. ********************************************************************************** July 2013: A correction has been applied to Nitrate_plus_Nitrite and Phosphate data from deep-water cruises analyzed at IOS between 2009 and 2012. For details see the following report: Corrections to Nitrate and Phosphate for Deep-Water Cruises from 2009 to 2012.pdf which is stored in folder: \\Cruise_Data\DOCUMENTS\Analysis Reference Papers *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0 0.99988) Transmissivity %/metre 10 -99 () (0 2.5) Salinity:T1:C1 PSS-78 10 -99 () (-0.25E-02 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.57E-02 1.0414) $END !-1-- --2--- ---3---- --4-- ---5--- --6--- --7-- ---8---- -9-- 10 11 ---12--- 13 !Samp Pressu Temperat Trans Fluores Oxygen Oxyge Salinity Numb Bo Bo Salinity Fl !le_ re ure: missi cence: : n: :T1:C1 er_o tt tt :Bottle ag !Numb Secondar vity URU: Dissol Disso ~bin ~u ~u ~o !er y Seapoin ved: lved: _rec mb en tt ! t SBE SBE ords er ce le !---- ------ -------- ----- ------- ------ ----- -------- ---- -- -- -------- -- *END OF HEADER 561 1399.2 2.4082 60.5 0.044 0.26 11.2 34.4851 121 20 19 34.4850 0 559 1500.4 2.3127 60.2 0.044 0.36 15.6 34.5052 81 14 17 -99.0000 0 560 1501.8 2.3121 60.2 0.044 0.35 15.3 34.5054 121 15 18 -99.0000 0 558 1701.3 2.1621 60.2 0.043 0.57 24.8 34.5375 121 19 16 34.5426 0 556 1999.8 1.9427 60.0 0.040 1.00 43.6 34.5827 71 13 14 -99.0000 0 555 2000.2 1.9427 60.0 0.041 1.00 43.5 34.5827 60 12 13 -99.0000 0 557 2000.3 1.9427 60.0 0.041 1.00 43.5 34.5827 121 18 15 34.5833 0 554 2500.3 1.7088 59.5 0.038 1.65 71.6 34.6288 121 11 12 -99.0000 0 553 2501.1 1.7086 59.5 0.039 1.65 71.6 34.6288 56 10 11 -99.0000 0 552 3000.3 1.5763 59.2 0.037 2.17 94.4 34.6554 121 17 10 34.6552 0 551 3000.7 1.5763 59.2 0.037 2.17 94.1 34.6554 59 9 9 -99.0000 0 550 3001.3 1.5763 59.2 0.037 2.16 93.7 34.6554 56 8 8 -99.0000 0 548 3500.5 1.5080 58.8 0.036 2.53 109.8 34.6717 59 6 6 -99.0000 0 549 3500.8 1.5080 58.8 0.036 2.54 110.2 34.6717 121 7 7 -99.0000 0 546 4000.1 1.4973 58.5 0.035 2.73 118.7 34.6805 72 5 4 -99.0000 0 547 4000.8 1.4974 58.5 0.035 2.74 118.8 34.6804 121 16 5 34.6872 0 545 4002.1 1.4975 58.5 0.035 2.73 118.6 34.6804 112 4 3 -99.0000 0 543 4315.5 1.5186 58.0 0.035 2.76 119.8 34.6829 121 2 1 -99.0000 0 544 4315.5 1.5186 58.0 0.035 2.75 119.5 34.6830 121 3 2 -99.0000 0