*2013/07/29 14:31:31.77 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2010/06/17 01:41:20.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 24 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : A98CDCFB NUMBER OF CHANNELS : 12 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 449 472 2 Pressure decibar 20.1 200.9 3 Temperature:Secondary 'deg C (ITS90)' 4.3102 7.4952 4 Transmissivity %/metre 48.5 62 5 Fluorescence:URU:Seapoint mg/m^3 0.47E-01 1.042 6 PAR uE/m^2/sec 6.4 325.1 7 Oxygen:Dissolved:SBE mL/L 2.66 6.85 8 Oxygen:Dissolved:SBE umol/kg 115.8 298 9 Salinity:T1:C1 PSS-78 32.7105 33.7785 10 Number_of_bin_records n/a 62 121 11 Bottle_Number n/a 1 24 12 Bottle:Firing_Sequence n/a 1 24 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 6 F ' ' 1 5 -99 ' ' 8 F ' ' 3 6 -99 ' ' 7 F ' ' 1 7 -99 ' ' 7 F ' ' 2 8 -99 ' ' 6 F ' ' 1 9 -99 ' ' 9 F ' ' 4 10 ' ' ' ' 5 I I 0 11 -99 ' ' 3 I I 0 12 -99 ' ' 3 I I 0 $END $REMARKS Data quality is expressed with the following flags ---------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). ---------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2010-13 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : P26 EVENT NUMBER : 65 LATITUDE : 49 59.97000 N ! (deg min) LONGITUDE : 144 59.97000 W ! (deg min) WATER DEPTH : 4253 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0506 LOCATION : Mid-ship ! custom item $REMARKS SOFTWARE VERSION SEASAVE V 7.18C $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2010/08/24 16:15:35 2057 2057 CLEAN 5.0.2 2010/08/24 16:16:08 ? ? CTDEDIT 4.61 2010/08/26 09:12:23 2057 2057 ADDSAMP 3.4 2010/08/27 11:52:52 2057 2057 BINAVE 4.1.1 2010/08/27 11:53:13 2057 24 CALIB 11.7 2010/09/03 11:34:51 24 24 MERGE 3.4 2010/10/20 16:06:03 24 24 CLEAN 5.0.2 2010/10/20 16:06:11 ? ? CALIB 11.7 2010/11/09 11:43:03 24 24 SORT 3.5 2010/11/09 11:43:14 24 24 REMOVECH 8.0 2010/11/09 11:45:10 24 24 CHGUNITS 3.0 2010/11/09 11:45:46 24 24 REORDER 1.2.1 2010/11/09 11:45:53 ? ? HDREDIT2 2.5.1 2010/11/10 15:51:31 ? ? HDREDIT2 2.5.1 2010/11/15 17:37:05 ? ? CALIB 11.7 2013/06/04 13:14:16 24 24 HDREDIT2 2.6 2013/07/08 08:50:23 ? ? CHANGE_FLAGS 1.0 2013/07/29 14:31:31 24 24 $END $REMARKS -CLEAN functions: 2010/08/24 16:15:49 20 Set event to last 4 characters of file name -CTDEDIT 2010/08/26 09:12:23 4 changes in channel Salinity:T1:C1 -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data_Processing\2010-13\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -CALIB parameters: 2010/09/03 11:34:51 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2010-13\Processing\doc\2010-13-recal-press.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.0000000E+00 0.9998800E+00 -The following MERGE parameters were used: 2010/10/20 16:06:01 2010/10/20 16:06:01 2010/10/20 16:06: Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Phaeo-Pigment:Extracted, Flag:Phaeo-Pigment:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Ammonium, Flag:Ammonium, Dimethyl_Sulphide, Flag:Dimethyl_Sulphide Primary file : Q:\Cruise_Data_Processing\2010-13\Processing\hydro\2010-13-0065.samavg Secondary file: Q:\Cruise_Data_Processing\2010-13\Processing\hydro\2010-13-0065.mrgcln1 -CLEAN functions: 2010/10/20 16:06:09 20 Remove Sea-Bird comments from the header. -CALIB parameters: 2010/11/09 11:43:03 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2010-13\Processing\doc\2010-13-recal-bottle.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Transmissivity %/metre 10 0.0000000E+00 0.2500000E+01 17 Salinity:T1:C1 PSS-78 10 -0.2500000E-02 0.1000000E+01 18 Oxygen:Dissolved:SBE mL/L 10 0.5700000E-02 0.1041400E+01 -SORT parameters: 2010/11/09 11:43:14 Sorted in ascending order of channel Pressure [dbars] -REMOVECH 2010/11/09 11:45:10 The following CHANNEL(S) were removed: Scan_Number Temperature:Primary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] pH:SBE [pH Units] Status:Pump Descent_Rate [m/s] Altimeter [metres] Salinity:T0:C0 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L to umol/kg -HEADER EDITS: 2010/11/10 15:51:31 Applied edit header: Q:\Cruise_Data_Processing\2010-13\Processing\doc\2010-13-bot-hdr.txt Channel 2: Pressure [decibar] Units: dbars ==> decibar Channel 5: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 6: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 7: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 -HEADER EDITS: 2010/11/15 17:37:05 Channel 12: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 11: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number -CALIB parameters: 2013/06/04 13:14:16 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = C:\DATA\Nutrients\doc\Nutrients-recal1.ccf WARNING: No calibration done on file C:\Data\Nutrients\2010-13\2010-13-0065.cor1 -HEADER EDITS: 2013/07/08 08:50:23 Applied edit header: C:\DATA\Nutrients\doc\headedit-correction.txt $END *COMMENTS CTDEDIT was used to remove a few spiky secondary salinity values around 60m. Analysis methods: - ----------------- Chlorophyll and Phaeo-Pigments samples were analyzed at sea using a Chemistry Turner Designs 10AU fluorometer which was calibrated on May 12, 2009 using pure chlorophyll a. Chlorophyll and Phaeo-Pigments precision was determined by analyzing replicate samples drawn from one Niskin. For details see worksheet “Precision” in file QF 2010-13 CHLChauv.xls. Oxygen samples were analyzed at sea using an automated Winkler titration system with modifications based on Carpenter (1965) and adhering to WOCE protocols (Culberson 1991). The titration system consists of a Brinkmann 665 Dosimat, a UV light source and a UV detector with a 365nm filter custom built by Scripps Institution of Oceanography. For details including a duplicate analysis, see document 2010-13oxy.xls. Salinity samples were collected in glass bottles and analyzed at sea using a Guildline Portasal (#58879) or at IOS on a Guildline model 8400B Autosal standardized with IAPSO standard seawater. See file 2010-13sal.xls for Autosal data and 2010-13 P8 Sal.txt and 2010-13-P16.txt for Portasal data. For information on precision see 2010-13-sal-duplicates.xls. Nutrient samples were collected in plastic tubes. Most samples were analyzed frozen at IOS using an Astoria autoanalyzer following methods described in Barwell-Clarke and Whitney (1996). Deep silicate samples (400m and below) were analyzed cool at IOS. For full data and details on nutrient duplicates and precision see file QF2010-13nuts.xls. NOTE: FROZEN SAMPLES WERE ACCIDENTALLY THAWED FOR 2 DAYS AT ROOM TEMPERATURE THEN STORED COOL UNTIL ANALYZED. The minimum detectable level for DMS is 0.10 nM, so “0” values should be interpreted as <0.10. For details on the collection and analysis of the DMS data see file 2010-13 DMS Report.doc and for data see DMS 2010-13 summary.xls. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. Culberson C.H. (1991) Dissolved oxygen. In WOCE Operations Manual. Volume 3: The Observational Program. Section 3.1: WOCE Hydrographic Program. Part 3.1.3: WHP Operations and Methods. WHP Office Report WHPO 91-1 / WOCE Report No. 68/91. 3. Barwell-Clarke, J. and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. ----------------------------------------------------------------------------------- ********************************************************************************** Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by correction factor 2.5, which was based on the assumption that deep offshore transmissivity should be about 62%/m. For details on the transmissometer post-processing see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should still be considered nominal. ********************************************************************************** July 2013: A correction has been applied to Nitrate_plus_Nitrite and Phosphate data from deep-water cruises analyzed at IOS between 2009 and 2012. For details see the following report: Corrections to Nitrate and Phosphate for Deep-Water Cruises from 2009 to 2012.pdf which is stored in folder: \\Cruise_Data\DOCUMENTS\Analysis Reference Papers *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0 0.99988) Transmissivity %/metre 10 -99 () (0 2.5) Salinity:T1:C1 PSS-78 10 -99 () (-0.25E-02 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.57E-02 1.0414) $END !-1-- --2--- ---3---- --4-- ---5--- --6--- --7--- --8-- ---9---- -10- 11 12 !Samp Pressu Temperat Trans Fluores PAR Oxygen Oxyge Salinity Numb Bo Bo !le_ re ure: missi cence: : n: :T1:C1 er_o tt tt !Numb Secondar vity URU: Dissol Disso ~bin ~u ~u !er y Seapoin ved: lved: _rec mb en ! t SBE SBE ords er ce !---- ------ -------- ----- ------- ------ ------ ----- -------- ---- -- -- *END OF HEADER 471 20.1 7.4952 48.5 1.005 325.1 6.83 297.3 32.7105 63 23 23 470 20.5 7.4928 48.5 1.042 322.3 6.84 297.8 32.7106 79 22 22 467 20.5 7.4928 48.5 1.023 321.0 6.84 297.5 32.7105 73 19 19 468 20.5 7.4926 48.5 1.021 318.1 6.84 297.9 32.7106 62 20 20 469 20.7 7.4897 48.5 1.037 323.4 6.85 298.0 32.7106 65 21 21 472 20.9 7.4894 48.5 1.014 312.5 6.84 297.8 32.7109 121 24 24 464 60.2 7.1611 52.8 0.718 17.5 6.74 293.2 32.7118 70 16 16 461 60.3 7.1608 52.8 0.734 17.4 6.73 292.9 32.7113 94 13 13 465 60.5 7.1621 52.8 0.733 17.4 6.73 293.1 32.7120 79 17 17 462 60.5 7.1616 52.8 0.715 17.5 6.73 293.0 32.7115 71 14 14 466 60.6 7.1627 52.8 0.735 17.2 6.73 293.0 32.7122 121 18 18 463 60.8 7.1611 52.8 0.730 17.3 6.73 293.0 32.7118 77 15 15 458 100.5 5.4361 61.5 0.084 7.4 5.98 260.1 33.0652 73 10 10 457 100.5 5.4358 61.5 0.091 7.4 5.97 259.9 33.0677 70 9 9 460 100.6 5.4364 61.5 0.089 7.4 6.00 260.9 33.0604 121 12 12 459 100.8 5.4364 61.5 0.093 7.4 5.99 260.6 33.0637 121 11 11 455 100.9 5.4362 61.5 0.092 7.5 5.96 259.2 33.0701 73 7 7 456 101.3 5.4357 61.2 0.089 7.4 5.95 259.1 33.0768 71 8 8 453 198.9 4.3110 61.5 0.048 6.4 2.66 115.9 33.7783 67 5 5 452 199.3 4.3113 62.0 0.048 6.4 2.66 115.9 33.7784 67 4 4 450 199.4 4.3112 62.0 0.048 6.4 2.67 116.3 33.7784 78 2 2 449 200.2 4.3109 62.0 0.055 6.4 2.67 116.1 33.7785 95 1 1 451 200.4 4.3102 61.8 0.047 6.4 2.67 116.0 33.7785 121 3 3 454 200.9 4.3105 62.0 0.047 6.4 2.66 115.8 33.7785 121 6 6