*2013/07/29 14:31:31.43 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2010/06/14 07:10:38.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 24 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 88F0A835 NUMBER OF CHANNELS : 11 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 388 411 2 Pressure decibar 300.4 1599.4 3 Temperature:Secondary 'deg C (ITS90)' 2.215 4.0589 4 Transmissivity %/metre 60.8 61.8 5 Fluorescence:URU:Seapoint mg/m^3 0.44E-01 0.47E-01 6 Oxygen:Dissolved:SBE mL/L 0.39 1.63 7 Oxygen:Dissolved:SBE umol/kg 17.1 70.8 8 Salinity:T1:C1 PSS-78 33.8903 34.5255 9 Number_of_bin_records n/a 68 121 10 Bottle_Number n/a 1 24 11 Bottle:Firing_Sequence n/a 1 24 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 6 F ' ' 1 5 -99 ' ' 8 F ' ' 3 6 -99 ' ' 7 F ' ' 2 7 -99 ' ' 6 F ' ' 1 8 -99 ' ' 9 F ' ' 4 9 ' ' ' ' 5 I I 0 10 -99 ' ' 3 I I 0 11 -99 ' ' 3 I I 0 $END $REMARKS Data quality is expressed with the following flags ---------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). ---------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2010-13 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : P26 EVENT NUMBER : 51 LATITUDE : 50 0.00000 N ! (deg min) LONGITUDE : 144 59.90000 W ! (deg min) WATER DEPTH : 4252 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0506 LOCATION : Mid-ship ! custom item $REMARKS SOFTWARE VERSION SEASAVE V 7.18C $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2010/08/24 16:15:32 2671 2671 CLEAN 5.0.2 2010/08/24 16:16:06 ? ? ADDSAMP 3.4 2010/08/27 11:52:49 2671 2671 BINAVE 4.1.1 2010/08/27 11:53:11 2671 24 CALIB 11.7 2010/09/03 11:34:51 24 24 MERGE 3.4 2010/10/20 16:06:03 24 24 CLEAN 5.0.2 2010/10/20 16:06:11 ? ? CALIB 11.7 2010/11/09 11:43:03 24 24 SORT 3.5 2010/11/09 11:43:14 24 24 REMOVECH 8.0 2010/11/09 11:45:28 24 24 CHGUNITS 3.0 2010/11/09 11:45:46 24 24 REORDER 1.2.1 2010/11/09 11:45:53 ? ? HDREDIT2 2.5.1 2010/11/10 15:51:31 ? ? HDREDIT2 2.5.1 2010/11/15 17:37:05 ? ? CALIB 11.7 2013/06/04 13:14:16 24 24 HDREDIT2 2.6 2013/07/08 08:50:23 ? ? CHANGE_FLAGS 1.0 2013/07/29 14:31:31 24 24 $END $REMARKS -CLEAN functions: 2010/08/24 16:15:49 20 Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data_Processing\2010-13\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -CALIB parameters: 2010/09/03 11:34:51 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2010-13\Processing\doc\2010-13-recal-press.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.0000000E+00 0.9998800E+00 -The following MERGE parameters were used: 2010/10/20 16:06:01 2010/10/20 16:06:01 2010/10/20 16:06: Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Phaeo-Pigment:Extracted, Flag:Phaeo-Pigment:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Ammonium, Flag:Ammonium, Dimethyl_Sulphide, Flag:Dimethyl_Sulphide Primary file : Q:\Cruise_Data_Processing\2010-13\Processing\hydro\2010-13-0051.samavg Secondary file: Q:\Cruise_Data_Processing\2010-13\Processing\hydro\2010-13-0051.mrgcln1 -CLEAN functions: 2010/10/20 16:06:09 20 Remove Sea-Bird comments from the header. -CALIB parameters: 2010/11/09 11:43:03 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2010-13\Processing\doc\2010-13-recal-bottle.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Transmissivity %/metre 10 0.0000000E+00 0.2500000E+01 17 Salinity:T1:C1 PSS-78 10 -0.2500000E-02 0.1000000E+01 18 Oxygen:Dissolved:SBE mL/L 10 0.5700000E-02 0.1041400E+01 -SORT parameters: 2010/11/09 11:43:14 Sorted in ascending order of channel Pressure [dbars] -REMOVECH 2010/11/09 11:45:28 The following CHANNEL(S) were removed: Scan_Number Temperature:Primary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] PAR [uE/m^2/sec] pH:SBE [pH Units] Status:Pump Descent_Rate [m/s] Altimeter [metres] Salinity:T0:C0 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L to umol/kg -HEADER EDITS: 2010/11/10 15:51:31 Applied edit header: Q:\Cruise_Data_Processing\2010-13\Processing\doc\2010-13-bot-hdr.txt Channel 2: Pressure [decibar] Units: dbars ==> decibar Channel 5: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 6: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 -HEADER EDITS: 2010/11/15 17:37:05 Channel 11: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 10: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number -CALIB parameters: 2013/06/04 13:14:16 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = C:\DATA\Nutrients\doc\Nutrients-recal1.ccf WARNING: No calibration done on file C:\Data\Nutrients\2010-13\2010-13-0051.cor1 -HEADER EDITS: 2013/07/08 08:50:23 Applied edit header: C:\DATA\Nutrients\doc\headedit-correction.txt $END *COMMENTS Analysis methods: - ----------------- Chlorophyll and Phaeo-Pigments samples were analyzed at sea using a Chemistry Turner Designs 10AU fluorometer which was calibrated on May 12, 2009 using pure chlorophyll a. Chlorophyll and Phaeo-Pigments precision was determined by analyzing replicate samples drawn from one Niskin. For details see worksheet “Precision” in file QF 2010-13 CHLChauv.xls. Oxygen samples were analyzed at sea using an automated Winkler titration system with modifications based on Carpenter (1965) and adhering to WOCE protocols (Culberson 1991). The titration system consists of a Brinkmann 665 Dosimat, a UV light source and a UV detector with a 365nm filter custom built by Scripps Institution of Oceanography. For details including a duplicate analysis, see document 2010-13oxy.xls. Salinity samples were collected in glass bottles and analyzed at sea using a Guildline Portasal (#58879) or at IOS on a Guildline model 8400B Autosal standardized with IAPSO standard seawater. See file 2010-13sal.xls for Autosal data and 2010-13 P8 Sal.txt and 2010-13-P16.txt for Portasal data. For information on precision see 2010-13-sal-duplicates.xls. Nutrient samples were collected in plastic tubes. Most samples were analyzed frozen at IOS using an Astoria autoanalyzer following methods described in Barwell-Clarke and Whitney (1996). Deep silicate samples (400m and below) were analyzed cool at IOS. For full data and details on nutrient duplicates and precision see file QF2010-13nuts.xls. NOTE: FROZEN SAMPLES WERE ACCIDENTALLY THAWED FOR 2 DAYS AT ROOM TEMPERATURE THEN STORED COOL UNTIL ANALYZED. The minimum detectable level for DMS is 0.10 nM, so “0” values should be interpreted as <0.10. For details on the collection and analysis of the DMS data see file 2010-13 DMS Report.doc and for data see DMS 2010-13 summary.xls. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. Culberson C.H. (1991) Dissolved oxygen. In WOCE Operations Manual. Volume 3: The Observational Program. Section 3.1: WOCE Hydrographic Program. Part 3.1.3: WHP Operations and Methods. WHP Office Report WHPO 91-1 / WOCE Report No. 68/91. 3. Barwell-Clarke, J. and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. ----------------------------------------------------------------------------------- ********************************************************************************** Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by correction factor 2.5, which was based on the assumption that deep offshore transmissivity should be about 62%/m. For details on the transmissometer post-processing see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should still be considered nominal. ********************************************************************************** July 2013: A correction has been applied to Nitrate_plus_Nitrite and Phosphate data from deep-water cruises analyzed at IOS between 2009 and 2012. For details see the following report: Corrections to Nitrate and Phosphate for Deep-Water Cruises from 2009 to 2012.pdf which is stored in folder: \\Cruise_Data\DOCUMENTS\Analysis Reference Papers *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0 0.99988) Transmissivity %/metre 10 -99 () (0 2.5) Salinity:T1:C1 PSS-78 10 -99 () (-0.25E-02 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.57E-02 1.0414) $END !-1-- --2--- ---3---- --4-- ---5--- --6--- --7-- ---8---- -9-- 10 11 !Samp Pressu Temperat Trans Fluores Oxygen Oxyge Salinity Numb Bo Bo !le_ re ure: missi cence: : n: :T1:C1 er_o tt tt !Numb Secondar vity URU: Dissol Disso ~bin ~u ~u !er y Seapoin ved: lved: _rec mb en ! t SBE SBE ords er ce !---- ------ -------- ----- ------- ------ ----- -------- ---- -- -- *END OF HEADER 406 300.4 4.0588 61.8 0.046 1.62 70.6 33.8904 101 19 19 408 300.5 4.0588 61.8 0.047 1.63 70.7 33.8904 103 21 21 411 300.6 4.0588 61.8 0.047 1.63 70.7 33.8903 121 24 24 410 300.7 4.0588 61.8 0.047 1.63 70.8 33.8904 121 23 23 407 300.8 4.0589 61.8 0.047 1.62 70.6 33.8904 111 20 20 409 300.9 4.0588 61.8 0.047 1.63 70.8 33.8904 121 22 22 403 399.8 3.9787 61.8 0.047 0.92 40.1 34.0316 121 16 16 400 400.1 3.9788 61.8 0.046 0.92 40.1 34.0315 102 13 13 405 400.1 3.9788 61.8 0.047 0.92 40.1 34.0317 121 18 18 401 400.1 3.9787 61.8 0.046 0.92 40.1 34.0316 121 14 14 404 400.4 3.9788 61.5 0.046 0.92 40.1 34.0317 121 17 17 402 400.8 3.9786 61.8 0.047 0.92 40.1 34.0317 112 15 15 398 599.7 3.5843 61.5 0.047 0.52 22.7 34.1993 68 11 11 399 600.9 3.5824 61.5 0.047 0.52 22.6 34.1999 121 12 12 397 799.7 3.1929 61.2 0.047 0.44 19.3 34.3043 121 10 10 396 800.1 3.1929 61.2 0.047 0.44 19.3 34.3044 75 9 9 394 1000.5 2.8989 61.0 0.045 0.39 17.1 34.3799 109 7 7 395 1000.8 2.8995 61.0 0.046 0.39 17.1 34.3798 121 8 8 392 1200.1 2.6258 60.8 0.046 0.41 17.6 34.4399 106 5 5 393 1200.2 2.6258 60.8 0.047 0.41 17.6 34.4398 121 6 6 391 1399.9 2.4038 60.8 0.044 0.54 23.4 34.4860 121 4 4 390 1400.4 2.4038 60.8 0.044 0.54 23.3 34.4860 90 3 3 389 1599.2 2.2156 60.8 0.044 0.77 33.3 34.5254 121 2 2 388 1599.4 2.2150 60.8 0.044 0.77 33.3 34.5255 121 1 1