*2018/04/02 11:37:27.33
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2010/09/20 12:34:36.000
    NUMBER OF RECORDS   : 51
    DATA DESCRIPTION    : CTD
    FILE TYPE           : ASCII
    CRC                 : F0BE8C2A
    NUMBER OF CHANNELS  : 12

    $TABLE: CHANNELS
    ! No Name                               Units           Minimum        Maximum
    !--- ---------------------------------- --------------- -------------- --------------
       1 Pressure                           decibar         1              51
       2 Temperature:Primary                'deg C (ITS90)' -1.2263        0.9155
       3 Conductivity:Primary               mS/cm           25.56193       26.37534
       4 Salinity:T0:C0                     PSS-78          30.5582        32.0812
       5 Oxygen:Dissolved:SBE               mL/L            7.43           8.913
       6 Transmissivity                     %/metre         40.7           61
       7 Fluorescence:Calibrated:Seapoint   mg/m^3          0.114          1.839
       8 Fluorescence_CDOM:URU:Wetlabs      mg/m^3          0.259          0.294
       9 PAR:Reference                      uE/m^2/sec      9.614          9.614
      10 Altimeter                          metres          6.6            56.2
      11 Number_of_bin_records              n/a             19             224
      12 Flag                               n/a             222            662
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '       10  F       ' '     3
       2  -99   ' '        9  F       ' '     4
       3  -99   ' '       11  F       ' '     6
       4  -99   ' '        9  F       ' '     4
       5  -99   ' '        8  F       ' '     3
       6  -99   ' '        6  F       ' '     1
       7  -99   ' '        8  F       ' '     3
       8  -99   ' '        8  F       ' '     3
       9  -99   ' '       11  F       ' '     3
      10  -99   ' '        7  F       ' '     1
      11  -99   ' '        5  F       ' '     0
      12  -99   ' '       11  E       ' '     3
    $END
    $REMARKS
        CTD Flag word has 3 columns: Temperature, Conductivity, and Oxygen. Data quality
        is expressed with the following flags:
        --------------------------------------------------------------------------------
        0 = No Quality Control.
        2 = Good.
        6 = Interpolated or replaced by dual sensor or upcast value.
        --------------------------------------------------------------------------------
        This file converted from Sea-Bird file:
        Z:\SHARE\DATA\Data Archive Process - 2017\Joe's work\2010-07\CTD\2010-07-0014.cnv
    $END

*ADMINISTRATION
    MISSION             : 2010-07
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C
    COUNTRY             : Canada
    PROJECT             : Joint Ocean Ice Study (JOIS incl PACI and BGEP)
    SCIENTIST           : Bill Williams
    PLATFORM            : Louis S. St. Laurent

*LOCATION
    GEOGRAPHIC AREA     : Arctic Ocean's Canada Basin
    STATION             : CB28aa
    EVENT NUMBER        : 14
    LATITUDE            :  70   0.26000 N  ! (deg min)
    LONGITUDE           : 140   0.84000 W  ! (deg min)
    WATER DEPTH         : 57
    ALTIMETER (M)       : 7.205                                 ! custom item
    $REMARKS
        Altimeter value is distance from bottom and is calculated as the
        median of the deepest 2 metres of data.
    $END

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-911plus
    SERIAL NUMBER       : 0756

    $TABLE: SENSORS
    !   Name                                        Abs Depth       Serial No
    !   ------------------------------------------  --------------  ----------
        Temperature                                 ' '             4397
        Conductivity                                ' '             2992
        'Pressure:Digiquartz with TC'               ' '             91164
        Temperature:2                               ' '             4402
        Conductivity:2                              ' '             2984
        Fluorometer:Seapoint                        ' '             SCF2841
        'Transmissometer:Chelsea/Seatech/Wetlab C'  ' '             SCF1052
        'Oxygen:SBE 43'                             ' '             430435
        Altimeter                                   ' '             1161
        'Fluorometer:Wetlab CDOM'                   ' '             1076
        PAR/Irradiance:Biospherical/Licor           ' '             70123
        Nitrate_plus_Nitrite:ISUS                   ' '             072
        Unavailable                                 ' '             ' '
        'SPAR/Surface Irradiance'                   ' '             20279
    $END
    $REMARKS
        Software Version Seasave V 7.20f
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.2  2018/03/27 11:35:13        51        51
        REMOVECH 8.2    2018/03/29 10:12:26        51        51
        HDREDIT2 3.1.1  2018/03/29 14:46:16 ?         ?
        REORDER  1.3.1  2018/04/02 11:32:52 ?         ?
        CLEAN    5.2.2  2018/04/02 11:37:27        51        51
    $END
$REMARKS
  -REMOVECH 2018/03/29 10:12:26
   The following CHANNEL(S) were removed:
    Scan_Number
    Depth:Salt_Water [metres]
    Temperature:Secondary [deg C (ITS90)]
    Conductivity:Secondary [mS/cm]
    Oxygen:Voltage:SBE [volts]
    Nitrate_plus_Nitrite:ISUS [Volts]
    PAR [uE/m^2/sec]
    Salinity:T1:C1 [PSS-78]
    Temperature:Potential [deg C (ITS90)]
    Sigma:Theta [kg/m^3]
    Speed:Sound [m/s]
  -HEADER EDITS: 2018/03/29 14:46:16
   Applied edit header: Z:\SHARE\DATA\Data Archive Process - 2017\Joe's work\2010-07\Headers\2010-07
  CTD Header casts 1-41.txt
   Channel  5: Fluorescence:Calibrated:Seapoint [mg/m^3]
     Name:   Fluorescence:URU:Seapoint ==> Fluorescence:Calibrated:Seapoint
  -CLEAN functions: 2018/04/02 11:37:15 20
   Reset #RECS, MIN & MAX values in header.
   Delete Empty Channels:     0 deleted.
$END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 9 Data File:
      FileName = C:\2010-07\CTD Raw\201007-0014.hdr
      Software Version Seasave V 7.20f
      Temperature SN = 4397
      Conductivity SN = 2992
      Number of Bytes Per Scan = 40
      Number of Voltage Words = 5
      Number of Scans Averaged by the Deck Unit = 1
      System UpLoad Time = Sep 20 2010 12:34:14
      NMEA Latitude = 70 00.26 N
      NMEA Longitude = 140 00.84 W
      NMEA UTC (Time) = Sep 20 2010  12:34:36
      Store Lat/Lon Data = Append to Every Scan
       Ship:CCGS Louis St-Laurent
       Cruise: 2010-07
       Station: CB28aa
       Depth (m):  57
    # nquan = 23
    # nvalues = 51
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = prDM: Pressure, Digiquartz [db]
    # name 2 = depSM: Depth [salt water, m]
    # name 3 = t090C: Temperature [ITS-90, deg C]
    # name 4 = t190C: Temperature, 2 [ITS-90, deg C]
    # name 5 = c0mS/cm: Conductivity [mS/cm]
    # name 6 = c1mS/cm: Conductivity, 2 [mS/cm]
    # name 7 = sbeox0V: Oxygen Voltage, SBE 43
    # name 8 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%]
    # name 9 = flSP: Fluorescence, Seapoint
    # name 10 = wetCDOM: Fluorescence, Wetlab CDOM [volts]
    # name 11 = upoly0: Upoly 0, ISUS
    # name 12 = par: PAR/Irradiance, Biospherical/Licor
    # name 13 = spar: SPAR/Surface Irradiance
    # name 14 = altM: Altimeter [m]
    # name 15 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 1
    # name 16 = sal00: Salinity, Practical [PSU]
    # name 17 = sal11: Salinity, Practical, 2 [PSU]
    # name 18 = potemp090C: Potential Temperature [ITS-90, deg C]
    # name 19 = sigma-é00: Density [sigma-theta, Kg/m^3]
    # name 20 = svCM: Sound Velocity [Chen-Millero, m/s]
    # name 21 = nbin: number of scans per bin
    # name 22 = flag: flag
    # span 0 =      11130,      13529
    # span 1 =      1.000,     51.000
    # span 2 =      0.990,     50.477
    # span 3 =    -1.2263,     0.9155
    # span 4 =    -1.2263,     0.9171
    # span 5 =  25.558698,  26.372350
    # span 6 =  25.560087,  26.377122
    # span 7 =     2.3998,     2.8595
    # span 8 =    79.8772,    88.3651
    # span 9 = 2.8055e-01, 4.8032e+00
    # span 10 =     4.6322,     5.4823
    # span 11 =  0.0000000,  0.0000000
    # span 12 = 9.5422e-01, 9.5422e-01
    # span 13 = 9.6142e+00, 9.6142e+00
    # span 14 =       6.61,      56.16
    # span 15 =    7.20821,    8.54739
    # span 16 =    30.5544,    32.0784
    # span 17 =    30.5555,    32.0798
    # span 18 =    -1.2273,     0.9153
    # span 19 =    24.4765,    25.7923
    # span 20 =    1439.82,    1447.46
    # span 21 =         19,        224
    # span 22 = 0.0000e+00, 0.0000e+00
    # interval = decibars: 1
    # start_time = Sep 20 2010 12:34:36
    # bad_flag = -9.990e-29
    # <?xml version="1.0" encoding="UTF-8"?>
    # <Sensors count="15" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4397</SerialNumber>
    #       <CalibrationDate>16-Nov-09</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.38309922e-003</G>
    #       <H>6.48097581e-004</H>
    #       <I>2.27814896e-005</I>
    #       <J>1.88273810e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2992</SerialNumber>
    #       <CalibrationDate>30-Oct-09</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.95306531e+000</G>
    #         <H>1.37276839e+000</H>
    #         <I>2.88566964e-004</I>
    #         <J>5.64317788e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Frequency 2, Pressure, Digiquartz with TC -->
    #     <PressureSensor SensorID="45" >
    #       <SerialNumber>91164</SerialNumber>
    #       <CalibrationDate>26-Feb-10</CalibrationDate>
    #       <C1>-4.636950e+004</C1>
    #       <C2>-7.400593e-002</C2>
    #       <C3>1.434200e-002</C3>
    #       <D1>3.442400e-002</D1>
    #       <D2>0.000000e+000</D2>
    #       <T1>3.040042e+001</T1>
    #       <T2>-3.057994e-004</T2>
    #       <T3>4.428230e-006</T3>
    #       <T4>1.991220e-009</T4>
    #       <Slope>1.00004000</Slope>
    #       <Offset>0.42000</Offset>
    #       <T5>0.000000e+000</T5>
    #       <AD590M>1.286590e-002</AD590M>
    #       <AD590B>-8.739580e+000</AD590B>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- Frequency 3, Temperature, 2 -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>4402</SerialNumber>
    #       <CalibrationDate>16-Nov-09</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.36934632e-003</G>
    #       <H>6.49541158e-004</H>
    #       <I>2.27688213e-005</I>
    #       <J>1.80960092e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- Frequency 4, Conductivity, 2 -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>2984</SerialNumber>
    #       <CalibrationDate>30-Oct-09</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-1.01906549e+001</G>
    #         <H>1.38394168e+000</H>
    #         <I>2.09077110e-004</I>
    #         <J>5.85141423e-005</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 0, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>SCF2841</SerialNumber>
    #       <CalibrationDate>unknown</CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>0</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 1, Transmissometer, Chelsea/Seatech/Wetlab CStar -->
    #     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
    #       <SerialNumber>SCF1052</SerialNumber>
    #       <CalibrationDate>21/06/2010</CalibrationDate>
    #       <M>20.5600</M>
    #       <B>-1.1500</B>
    #       <PathLength>0.250</PathLength>
    #     </TransChelseaSeatechWetlabCStarSensor>
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 2, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>430435</SerialNumber>
    #       <CalibrationDate>06-Mar-10</CalibrationDate>
    #       <Use2007Equation>1</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>0.0000e+000</Soc>
    #         <offset>0.0000</offset>
    #         <Pcor>0.00e+000</Pcor>
    #         <Tcor>0.0000</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc> 0.4448</Soc>
    #         <offset>-0.4994</offset>
    #         <A>-2.2021e-003</A>
    #         <B> 1.3327e-004</B>
    #         <C>-2.3502e-006</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.9263e-004</D1>
    #         <D2>-4.6480e-002</D2>
    #         <E> 3.6000e-002</E>
    #         <Tau20> 1.0200</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 3, Altimeter -->
    #     <AltimeterSensor SensorID="0" >
    #       <SerialNumber>1161</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <ScaleFactor>15.000</ScaleFactor>
    #       <Offset>0.000</Offset>
    #     </AltimeterSensor>
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- A/D voltage 4, Fluorometer, Wetlab CDOM -->
    #     <FluoroWetlabCDOM_Sensor SensorID="19" >
    #       <SerialNumber>1076</SerialNumber>
    #       <CalibrationDate>2006/11/6</CalibrationDate>
    #       <ScaleFactor>24.500</ScaleFactor>
    #       <Vblank>0.070</Vblank>
    #     </FluoroWetlabCDOM_Sensor>
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- A/D voltage 5, Free -->
    #   </sensor>
    #   <sensor Channel="12" >
    #     <!-- A/D voltage 6, PAR/Irradiance, Biospherical/Licor -->
    #     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
    #       <SerialNumber>70123</SerialNumber>
    #       <CalibrationDate>31/08/2009</CalibrationDate>
    #       <M>1.00000000</M>
    #       <B>0.00000000</B>
    #       <CalibrationConstant>107000000000.00000000</CalibrationConstant>
    #       <Multiplier>1.00000000</Multiplier>
    #       <Offset>0.94487000</Offset>
    #     </PAR_BiosphericalLicorChelseaSensor>
    #   </sensor>
    #   <sensor Channel="13" >
    #     <!-- A/D voltage 7, User Polynomial -->
    #     <UserPolynomialSensor SensorID="61" >
    #       <SerialNumber>072</SerialNumber>
    #       <CalibrationDate>2010</CalibrationDate>
    #       <SensorName>ISUS</SensorName>
    #       <A0>0.00000000</A0>
    #       <A1>1.00000000</A1>
    #       <A2>0.00000000</A2>
    #       <A3>0.00000000</A3>
    #     </UserPolynomialSensor>
    #   </sensor>
    #   <sensor Channel="14" >
    #     <!-- SPAR voltage, Unavailable -->
    #   </sensor>
    #   <sensor Channel="15" >
    #     <!-- SPAR voltage, SPAR/Surface Irradiance -->
    #     <SPAR_Sensor SensorID="51" >
    #       <SerialNumber>20279</SerialNumber>
    #       <CalibrationDate>2007-03-13</CalibrationDate>
    #       <ConversionFactor>1574.80000000</ConversionFactor>
    #       <RatioMultiplier>1.00000000</RatioMultiplier>
    #     </SPAR_Sensor>
    #   </sensor>
    # </Sensors>
    # datcnv_date = Mar 31 2011 10:13:20, 7.20b
    # datcnv_in = C:\CTD\Raw\201007-0014.hex C:\CTD\Raw\201007-0014.XMLCON
    # datcnv_skipover = 10900
    # datcnv_ox_hysteresis_correction = yes
    # alignctd_date = Apr 14 2011 09:39:07, 7.20b
    # alignctd_in = C:\CTD\process\cnv_raw\201007-0014.cnv
    # alignctd_adv = sbeox0V 7.000, xmiss 5.000, flSP 3.000, wetCDOM 4.000
    # filter_date = Apr 14 2011 09:50:25, 7.20b
    # filter_in = C:\CTD\process\cnv_raw\201007-0014.cnv
    # filter_low_pass_tc_A = 0.030
    # filter_low_pass_tc_B = 0.150
    # filter_low_pass_A_vars =
    # filter_low_pass_B_vars = prDM depSM
    # loopedit_date = Apr 14 2011 10:09:40, 7.20b
    # loopedit_in = C:\CTD\process\cnv_raw\201007-0014.cnv
    # loopedit_minVelocity = 0.000
    # loopedit_surfaceSoak: do not remove
    # loopedit_excl_bad_scans = yes
    # wildedit_date = Apr 14 2011 10:23:43, 7.20b
    # wildedit_in = C:\CTD\process\cnv_raw\201007-0014.cnv
    # wildedit_pass1_nstd = 10.0
    # wildedit_pass2_nstd = 20.0
    # wildedit_pass2_mindelta = 0.000e+000
    # wildedit_npoint = 100
    # wildedit_vars = prDM depSM t090C t190C c0mS/cm c1mS/cm sbeox0V xmiss flSP wetC
    DOM upoly0 par spar altM
    # wildedit_excl_bad_scans = yes
    # celltm_date = Apr 14 2011 10:33:46, 7.20b
    # celltm_in = C:\CTD\process\cnv_raw\201007-0014.cnv
    # celltm_alpha = 0.0300, 0.0300
    # celltm_tau = 7.0000, 7.0000
    # celltm_temp_sensor_use_for_cond = primary, secondary
    # Derive_date = Apr 14 2011 10:44:11, 7.20b
    # Derive_in = C:\CTD\process\cnv_raw\201007-0014.cnv C:\CTD\process\cnv_raw\2010
    07-0014.CON
    # derive_time_window_docdt = seconds: 1
    # derive_ox_tau_correction = no
    # binavg_date = Apr 14 2011 10:57:40, 7.20b
    # binavg_in = C:\CTD\process\cnv_raw\201007-0014.cnv
    # binavg_bintype = decibars
    # binavg_binsize = 1
    # binavg_excl_bad_scans = yes
    # binavg_skipover = 0
    # binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
    # split_date = Apr 14 2011 11:08:02, 7.20b
    # split_in = C:\CTD\process\cnv_raw\201007-0014.cnv
    # split_excl_bad_scans = yes
     END*

    CTD Data Processing Notes:
    --------------------------

    Processing notes can be found in the DOC directory in folder "Individual Data Reports"
    (2010-07 CTD report Draft - MD 20101118.doc).

    Standard seabird processing steps were used. Pressure, primary and secondary temperature,
    primary and secondary conductivity, oxygen and fluorescence have been calibrated. Spikes
    in primary temperature and primary conductivity have been interpolated over and where
    needed secondary values (when available) have replaced the primary values. Salinity was
    recalculated. Transmission, CDOM fluorescence, altimetry, and ISUS nitrate are not
    calibrated or have nominal calibrations as described below.

    For further information see document: 2010-07_CTD SBE911 Processing.doc

    CTD Pressure: The lab calibration was adjusted by applying +0.42dbar offset to the bias
    based on in-air surface readings of the CTD.

    CTD Temperature: The pre-cruise lab calibration was used after comparisons with dual
    sensor and post-cruise calibration information.

    CTD Conductivity: The pre-cruise lab calibration was adjusted after comparisons with
    dual sensor, expected deep water values and water sample data. Primary conductivity was
    adjusted from the pre-cruise lab calibration over 4 groups of casts to correct for
    initial offsets equivalent to -0.0025 to -0.0062 PSU in salinity. Secondary conductivity
    was adjusted from the pre-cruise calibration in 2 groups of casts to correct for initial
    offsets equivalent to -0.0005 to -0.0015 PSU in salinity.

    CTD Oxygen: Oxygen data were collected with a SBE43 sensor installed with pumped flow
    in-line after the primary temperature and conductivity sensors. A lag of -7 seconds was
    applied to oxygen voltage in the Seabird processing step Align. Downcast CTD oxygen
    voltage and upcast temperature and salinity were used to calibrate CTD to water sample
    oxygen (upcast). Fitting method followed Seabirds Application Note 64-2 (“SBE 43
    Dissolved Oxygen Sensor Calibration and Data Corrections using Winkler Titrations”). A
    fit for casts 1 to 38 was applied to all casts with an additional offset of 0.02ml/l
    applied to casts 58 to 72. A remaining pressure dependent shape in the residual between
    water sample and CTD oxygen was removed by subtracting a mean curve. The mean curve was
    made by fitting data from discreet pressure ranges and then stitching together the  curves
    for each pressure range using spline interpolation.

    CTD Fluorometer: Data are from a Seapoint fluorometer with pumped flow in-line after the
    secondary temperature and conductivity sensors. An alignment of -3sec applied. Calibration
    with bottle data was performed using bottle chlorophyll values between  0.025 and
    0.600 mg/m3 with a resulting  adjustment of y = 0.0066 + 0.3815x where x was nominal
    chlorophyll value and n= 64 out of 76, STD of 0.01mg/m3.

    CTD Transmissometer: Data are from a WETLabs CSTAR DR transmissometer. Data are
    unprocessed, using an in-air 2-point calibration from 21 Jun 2010. An alignment of -5sec
    applied.

    CTD CDOM Fluorometer: Data are from a WETLabs ECO CDOM FLCDRTD. They are unprocessed and
    given as raw voltage. An alignment of -4sec was applied.

    CTD Altimeter: Altimeter data are from a Datasonics PSA-916D and are unprocessed, using
    a calibration from 31 March 2005.

    CTD Nitrate: Data are from an ISUS Nitrate sensor used on select stations. Data are
    available for casts 1, 2, 5 (downcast to 600dbar) and 25.  Data are unprocessed.

    CTD Photosynthetically Active Radiation (PAR): Data collected using a Biospherical
    QSP-2300, however only used on Cast 1 and 2. These data are unprocessed with calibration
    from 13Mar2007 applied.

    CTD Surface Reference Photosynthetically Active Radiation (SPAR): Data collected using a
    Biospherical  QSR-2200. These data are nominal with applied calibration from 13Mar2007.
    Sensor not regularly cleaned and may have had a temporary snow cover during casts.

    Data Notes:

    Cast 25 - Nitrate data replaced with pad value after 600 dbar.
    Cast 49 - Fluorescence CDOM data removed. Data value pegged at maximum voltage of 4.95V.
              Cause unknown.

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                        Units    Fmla Pad    Coefficients
    !   --------------------------- -------- ---- ------ ------------
        Conductivity:Primary        mS/cm      10 -99    () (0.109E-01 0.9997)
        Conductivity:Secondary      mS/cm      10 -99    () (0.98E-02 0.9997)
        Fluorescence:URU:Seapoint   mg/m^3     10 -99    () (0.66E-02 0.3815)
    $END
!----1---- ---2---- ----3----- ---4---- ---5--- --6-- ---7--- ---8--- ----9----- --10-- -11- ----12----
!Pressure  Temperat Conductivi Salinity Oxygen: Trans Fluores Fluores PAR:       Altime Numb    Flag   
!          ure:     ty:Primary :T0:C0   Dissolv missi cence:  cence_  Reference  ter    er_o           
!          Primary                      ed:SBE  vity  Calibra CDOM:                     ~bin           
!                                                     ted:Sea URU:                      _rec           
!                                                     point   Wetlabs                   ords           
!--------- -------- ---------- -------- ------- ----- ------- ------- ---------- ------ ---- ----------
*END OF HEADER
     1.000   0.9155  26.375338  30.5598   8.723  40.7   0.743   0.290      9.614   48.6  59.  0.662E+03
     2.000   0.9155  26.375338  30.5593   8.739  48.0   0.639   0.268      9.614   33.8  22.  0.662E+03
     3.000   0.9155  26.375338  30.5587   8.746  47.5   0.637   0.270      9.614   56.2  19.  0.662E+03
     4.000   0.9155  26.375338  30.5582   8.749  47.8   0.611   0.270      9.614   23.9  27.  0.662E+03
     5.000   0.9112  26.374182  30.5604   8.748  47.1   0.702   0.268      9.614   54.4  41.  0.662E+03
     6.000   0.9069  26.373026  30.5626   8.770  46.5   0.622   0.270      9.614   52.8  32.  0.662E+03
     7.000   0.9027  26.371870  30.5648   8.793  47.4   0.651   0.276      9.614   52.0  34.  0.662E+03
     8.000   0.8984  26.370714  30.5670   8.804  47.5   0.843   0.273      9.614   50.8  35.  0.662E+03
     9.000   0.8941  26.369558  30.5692   8.806  47.7   0.751   0.270      9.614   49.8  28.  0.662E+03
    10.000   0.8898  26.368402  30.5714   8.790  47.6   0.688   0.270      9.614   49.0  29.  0.662E+03
    11.000   0.8856  26.367247  30.5736   8.761  46.1   0.607   0.271      9.614   48.0  28.  0.662E+03
    12.000   0.8813  26.366091  30.5758   8.768  44.0   0.701   0.272      9.614   47.0  27.  0.662E+03
    13.000   0.8770  26.364933  30.5780   8.786  43.1   0.692   0.275      9.614   45.9  27.  0.662E+03
    14.000   0.8700  26.362259  30.5809   8.786  42.2   0.710   0.279      9.614   44.9  27.  0.222E+03
    15.000   0.8194  26.368092  30.6378   8.776  42.3   0.972   0.276      9.614   43.8  27.  0.222E+03
    16.000   0.5682  26.296635  30.7950   8.811  43.1   1.039   0.277      9.614   42.8  26.  0.222E+03
    17.000   0.5659  26.300365  30.8015   8.794  43.9   1.194   0.276      9.614   41.8  26.  0.222E+03
    18.000   0.5782  26.321249  30.8156   8.762  45.2   1.258   0.275      9.614   40.8  26.  0.222E+03
    19.000   0.5496  26.321533  30.8440   8.749  47.5   1.196   0.269      9.614   39.8  27.  0.222E+03
    20.000   0.4279  26.245756  30.8674   8.746  50.3   1.249   0.262      9.614   38.8  27.  0.222E+03
    21.000   0.2725  26.153730  30.9036   8.770  54.6   1.144   0.260      9.614   37.8  28.  0.222E+03
    22.000   0.2024  26.112597  30.9202   8.780  57.5   0.947   0.261      9.614   36.8  27.  0.222E+03
    23.000  -0.0465  25.963230  30.9761   8.830  59.9   0.716   0.259      9.614   35.8  28.  0.222E+03
    24.000  -0.1794  25.883699  31.0061   8.846  61.0   0.472   0.264      9.614   34.8  27.  0.222E+03
    25.000  -0.5513  25.682470  31.1195   8.913  60.9   0.339   0.266      9.614   33.7  27.  0.222E+03
    26.000  -0.6671  25.628195  31.1658   8.906  59.5   0.286   0.269      9.614   32.7  28.  0.222E+03
    27.000  -0.7680  25.588408  31.2162   8.887  58.1   0.234   0.265      9.614   31.7  29.  0.222E+03
    28.000  -0.8636  25.561930  31.2793   8.844  57.8   0.248   0.267      9.614   30.6  29.  0.222E+03
    29.000  -0.8939  25.580238  31.3349   8.777  57.4   0.427   0.269      9.614   29.6  30.  0.222E+03
    30.000  -0.9214  25.608568  31.4011   8.721  57.6   0.500   0.271      9.614   28.6  30.  0.222E+03
    31.000  -0.9610  25.643671  31.4893   8.683  57.6   0.462   0.275      9.614   27.6  30.  0.222E+03
    32.000  -0.9887  25.676632  31.5623   8.653  57.6   0.444   0.271      9.614   26.6  30.  0.222E+03
    33.000  -1.0143  25.675381  31.5869   8.637  57.9   0.396   0.274      9.614   25.6  29.  0.222E+03
    34.000  -1.0324  25.668468  31.5960   8.628  57.9   0.309   0.267      9.614   24.5  36.  0.222E+03
    35.000  -1.0438  25.666023  31.6041   8.606  57.4   0.281   0.268      9.614   23.4  35.  0.222E+03
    36.000  -1.0612  25.658552  31.6118   8.562  56.9   0.338   0.272      9.614   22.4  38.  0.222E+03
    37.000  -1.0584  25.664579  31.6164   8.562  52.0   0.376   0.276      9.614   21.4  36.  0.222E+03
    38.000  -1.0311  25.698795  31.6333   8.558  48.0   0.513   0.282      9.614   20.3  37.  0.222E+03
    39.000  -1.0550  25.712227  31.6761   8.430  49.8   1.286   0.280      9.614   19.3  36.  0.222E+03
    40.000  -1.2026  25.672590  31.7780   8.218  51.0   1.839   0.286      9.614   18.3  39.  0.222E+03
    41.000  -1.2111  25.721033  31.8524   7.960  51.7   1.099   0.288      9.614   17.2  43.  0.222E+03
    42.000  -1.2145  25.797258  31.9592   7.763  51.6   0.417   0.292      9.614   16.2  45.  0.222E+03
    43.000  -1.2224  25.852896  32.0428   7.643  51.8   0.223   0.293      9.614   15.2  48.  0.222E+03
    44.000  -1.2243  25.866821  32.0632   7.565  51.6   0.169   0.290      9.614   14.1  52.  0.222E+03
    45.000  -1.2259  25.874443  32.0747   7.518  51.3   0.136   0.290      9.614   13.1  49.  0.222E+03
    46.000  -1.2261  25.876383  32.0770   7.490  51.1   0.125   0.292      9.614   12.0  55.  0.222E+03
    47.000  -1.2261  25.878527  32.0793   7.473  50.8   0.121   0.293      9.614   11.0  52.  0.222E+03
    48.000  -1.2263  25.879333  32.0800   7.468  50.9   0.114   0.293      9.614    9.9  52.  0.662E+03
    49.000  -1.2248  25.881214  32.0804   7.464  50.7   0.133   0.292      9.614    8.9  58.  0.662E+03
    50.000  -1.2234  25.883095  32.0808   7.447  50.9   0.146   0.294      9.614    7.8  98.  0.662E+03
    51.000  -1.2219  25.884974  32.0812   7.430  50.8   0.134   0.292      9.614    6.6 224.  0.662E+03