*2016/02/05 09:27:27.09 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2010/07/14 11:59:08.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 17 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 1F96EE7C NUMBER OF CHANNELS : 24 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ------------------------------- --------------- -------------- -------------- 1 Bottle_Number n/a 1 17 2 Bottle:Firing_Sequence n/a 1 17 3 Pressure decibar 5.286 1001.143 4 Temperature:Primary 'deg C (ITS90)' 2.9583 7.3516 5 Transmissivity %/metre 41.7 60.4 6 Fluorescence:URU:Seapoint mg/m^3 0.44E-01 4.961 7 Fluorescence_CDOM:URU:Wetlabs mg/m^3 3.559 4.396 8 PAR uE/m^2/sec 0 0 9 PAR:Reference uE/m^2/sec 2.178 2.178 10 Salinity:T0:C0 PSS-78 32.5876 34.3228 11 Oxygen:Dissolved:SBE mL/L 0.406 7.025 12 Oxygen:Dissolved:SBE umol/kg 17.64251 305.8262 13 Number_of_bin_records n/a 241 241 14 Sample_Number n/a 125 141 15 Salinity:Bottle PSS-78 32.5984 34.3326 16 Flag:Salinity:Bottle ' ' 17 Nitrate_plus_Nitrite umol/L 6.1 44.3 18 Flag:Nitrate_plus_Nitrite ' ' 19 Silicate umol/L 19.7 140.2 20 Flag:Silicate ' ' 21 Phosphate umol/L 0.9 3.17 22 Flag:Phosphate ' ' 23 Chlorophyll:Extracted mg/m^3 0.5E-01 2.01 24 Flag:Chlorophyll:Extracted ' ' $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 3 I I 0 2 -99 ' ' 3 I I 0 3 -99 ' ' 7 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 8 F ' ' 3 8 -99 ' ' 7 F ' ' 1 9 -99 ' ' 7 F ' ' 1 10 -99 ' ' 9 F ' ' 4 11 -99 ' ' 6 F ' ' 1 12 -99 ' ' 5 F ' ' 0 13 ' ' ' ' 5 I I 0 14 -99 ' ' 5 I I 0 15 -99 ' ' ' ' F9.4 R4 ' ' 16 0 ' ' 3 NQ C ' ' 17 -99 ' ' ' ' F6.1 R4 ' ' 18 0 ' ' 3 NQ C ' ' 19 -99 ' ' ' ' F6.1 R4 ' ' 20 0 ' ' 3 NQ C ' ' 21 -99 ' ' ' ' F6.2 R4 ' ' 22 0 ' ' 3 NQ C ' ' 23 -99 ' ' ' ' F7.2 R4 ' ' 24 0 ' ' 3 NQ C ' ' $END $REMARKS Data quality is expressed with the following flags ---------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). ---------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2010-05 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : C3O/IPY SCIENTIST : Vagle S. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : N. Pacific / Bering Sea / Chukchi Sea STATION : BCL-2 EVENT NUMBER : 9 LATITUDE : 55 3.63000 N ! (deg min) LONGITUDE : 170 12.46000 W ! (deg min) WATER DEPTH : 2611 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0941 $REMARKS SOFTWARE VERSION SEASAVE V 7.20C $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1.2 2012/07/10 16:15:13 4097 4097 CLEAN 5.0.4 2012/07/10 16:19:14 4097 4097 ADDSAMP 3.5 2012/07/11 10:30:36 4097 4097 REMOVECH 8.2 2016/02/05 09:24:51 4097 4097 BINAVE 4.2 2016/02/05 09:25:22 4097 17 MERGE 3.5 2016/02/05 09:27:04 17 17 CLEAN 5.2.1 2016/02/05 09:27:07 17 17 CALIB 11.8.1 2016/02/05 09:27:11 17 17 SORT 3.6 2016/02/05 09:27:15 17 17 REMOVECH 8.2 2016/02/05 09:27:17 17 17 CHGUNITS 3.1 2016/02/05 09:27:20 17 17 REORDER 1.3.1 2016/02/05 09:27:23 ? ? HDREDIT2 3.0.2 2016/02/05 09:27:27 ? ? $END $REMARKS -CLEAN functions: 2012/07/10 16:18:59 20 Reset #RECS, MIN & MAX values in header. Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: P:\Cruise_Data_Processing\2010-05\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -REMOVECH 2016/02/05 09:24:51 The following CHANNEL(S) were removed: Voltage:1 [volts] Voltage:0 [volts] Voltage:4 [volts] Voltage:6 [volts] Voltage:3 [volts] Voltage:5 [volts] -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2016/02/05 09:27:04 Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Secondary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle [PSS-78], Flag:Salinity:Bottle [ ], Nitrate_plus_Nitrite [umol/L], Flag:Nitrate_plus_Nitrite [ ], Silicate [umol/L], Flag:Silicate [ ], Phosphate [umol/L], Flag:Phosphate [ ], Chlorophyll:Extracted [mg/m^3], Flag:Chlorophyll:Extracted [ ], Carbon:Dissolved:Inorganic [umol/kg], Flag:Carbon:Dissolved:Inorganic [ ], Alkalinity:Total [umol/kg], Flag:Alkalinity:Total [ ], Oxygen:Isotope:18 [/mille], Flag:Oxygen:Isotope:18 [ ] Primary file : P:\Cruise_Data_Processing\2010-05\Processing\HYDRO\2010-05-0009.samavg Secondary file: P:\Cruise_Data_Processing\2010-05\Processing\HYDRO\2010-05-0009.mrgcln1s Comments from secondary file: P:\Cruise_Data_Processing\2010-05\Processing\HYDRO\2010-05-0009.mrgcln1s ------------------------------------------------------------------------ -SORT parameters: 2016/02/04 12:53:20 Sorted in ascending order of channel Bottle_Number [na/] -CLEAN functions: 2016/02/05 09:27:07 20 Reset #RECS, MIN & MAX values in header. Change character data from " " to "0" in channels Flag* Delete Empty Channels: 6 deleted. -CALIB parameters: 2016/02/05 09:27:11 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2010-05\Processing\doc\2010-05-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 10 PAR uE/m^2/se 10 0.0000000E+00 0.1597600E+01 -SORT parameters: 2016/02/05 09:27:15 Sorted in ascending order of channel Pressure [dbars] -REMOVECH 2016/02/05 09:27:17 The following CHANNEL(S) were removed: Scan_Number Temperature:Secondary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Altimeter [metres] Status:Pump Descent_Rate [m/s] Salinity:T1:C1 [PSS-78] Flag -CHANGE units: Temperature reference channel: Temperature:Primary Salinity reference channel: Salinity:T0:C0 'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L to umol/kg -HEADER EDITS: 2016/02/05 09:27:27 Applied edit header: P:\Cruise_Data_Processing\2010-05\Processing\doc\HYDRO\2010-05-bot-hdr.txt Channel 3: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 6: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 8: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 9: PAR:Reference [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 11: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F6.1 Channel 2: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 12: Oxygen:Dissolved:SBE [umol/kg] Format: F6.2 ==> F5.0 Channel 7: Fluorescence_CDOM:URU:Wetlabs [mg/m^3] Name: Fluorescence:WetLabs:CDOM ==> Fluorescence_CDOM:URU:Wetlabs Channel 1: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\2010-05_SWL\Raw\201005-009.hex Software Version Seasave V 7.20c Temperature SN = 03P5048 Conductivity SN = 3579 Number of Bytes Per Scan = 44 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 Append System Time to Every Scan System UpLoad Time = Jul 14 2010 11:59:05 NMEA Latitude = 55 03.63 N NMEA Longitude = 170 12.46 W NMEA UTC (Time) = Jul 14 2010 11:59:08 Store Lat/Lon Data = Append to Every Scan Ship: Sir Wilfrid Laurier Station: BCL-2 Depth: 2603 m # nquan = 27 # nvalues = 4097 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech [%] # name 7 = v1: Voltage 1 # name 8 = flSP: Fluorescence, Seapoint # name 9 = v0: Voltage 0 # name 10 = par: PAR/Irradiance, Biospherical/Licor # name 11 = v4: Voltage 4 # name 12 = spar: SPAR/Surface Irradiance # name 13 = sbeox0V: Oxygen raw, SBE 43 [V] # name 14 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3] # name 15 = v6: Voltage 6 # name 16 = altM: Altimeter [m] # name 17 = v3: Voltage 3 # name 18 = v5: Voltage 5 # name 19 = pumps: Pump Status # name 20 = dz/dtM: Descent Rate [m/s] # name 21 = bpos: Bottle Position in Carousel # name 22 = nbf: Bottles Fired # name 23 = sal00: Salinity, Practical [PSU] # name 24 = sal11: Salinity, Practical, 2 [PSU] # name 25 = sbeox0ML/L: Oxygen, SBE 43 [ml/l] # name 26 = flag: 0.000e+00 # interval = seconds: 0.0416667 # start_time = Jul 14 2010 11:59:08 [NMEA time, header] # bad_flag = -9.990e-29 # # # # # 03P5048 # 25-Nov-09 # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.33971000e-003 # 6.38381400e-004 # 2.15555100e-005 # 1.94500200e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 3579 # 25-Nov-09 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -9.41092798e+000 # 1.16747446e+000 # -1.53293541e-003 # 1.57122782e-004 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 0941 # 07-Dec-09 # -4.259763e+004 # -9.844260e-001 # 1.376500e-002 # 3.562200e-002 # 0.000000e+000 # 3.042047e+001 # -6.119116e-004 # 4.117890e-006 # 3.466810e-009 # 1.00000000 # -0.90390 # 0.000000e+000 # 1.281400e-002 # -9.482010e+000 # # # # # # 5073 # 25-Nov-09 # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.38635500e-003 # 6.43429300e-004 # 2.29368500e-005 # 2.18099500e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 3581 # 25-Nov-09 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -9.28010709e+000 # 1.14260600e+000 # -1.58332387e-003 # 1.58989630e-004 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 2745 # # # 1 # 0.000 # # # # # # CST-993-DR # 30-Jun-09 # 20.1700 # -1.1800 # 0.250 # # # # # # 1117 # 25-Nov-09 # 1 # # # 0.0000 # 0.0000e+000 # 0.0000 # 0.00e+000 # 0.0000 # 0.0 # # # # 4.0380e-001 # -0.5140 # -1.5923e-003 # 1.4515e-004 # -2.4492e-006 # 2.5826e+000 # 1.92630e-004 # -4.64800e-002 # 3.6000e-002 # 1.7100 #

-3.3000e-002

#

5.0000e+003

#

1.4500e+003

# # # # # # # 1252 # # 15.000 # 0.000 # # # # # # 70123 # 30/08/2009 # 1.00000000 # 0.00000000 # 10718100000.00000000 # 1.00000000 # -0.09470000 # # # # # # 072 # # ISUS v2 # 0.00000000 # 1.00000000 # 0.00000000 # 0.00000000 # # # # # # s/n 1076 # 6/11/2006 # 24.500 # # 0.070 # # # # # # # # # # # # 20281 # 9 April 2007 # 1784.00000000 # 1.00000000 # # # # datcnv_date = Jul 10 2012 16:10:27, 7.21d # datcnv_in = P:\Cruise_Data_Processing\2010-05\RAW\CTD\2010-05-0009.hex P:\Crui se_Data_Processing\2010-05\Processing\doc\2010-05-ctd1.xmlcon # datcnv_ox_hysteresis_correction = yes # datcnv_ox_tau_correction = yes # datcnv_bottle_scan_range_source = BL file # datcnv_scans_per_bottle = 241 END* Comments from secondary file: P:\Cruise_Data_Processing\2010-05\Processing\HYDRO\2010-05-0009.mrgcln1s ------------------------------------------------------------------------ Sample_Number 125: SAL: Outlier in comparison with CTD; near-bottom bottle - no salinity that high in cast. Sample_Number 126: SAL: Outlier in comparison with CTD; possibly due to shed wake corruption of bottle contents but descent rate suggests good flushing. Sample_Number 131: SAL: Outlier in comparison with CTD; bottle value corresponds to CTD value 11m lower. Sample_Number 133: SAL: Outlier in comparison with CTD; bottle value corresponds to CTD about 15m below. Sample_Number 135: SAL: Outlier in comparison with CTD; bottle value corresponds to CTD about 13m below. Sample_Number 136: SAL: Outlier in comparison with CTD; possibly due to incomplete flushing of bottle. Analysis methods: ----------------- Chlorophyll samples were filtered onto 25mm GF/F filters and stored in glass scintillation vials. Filters were frozen at -20 C initially to fracture cell membranes, then 10 mL of 90% acetone was added and samples stored in the dark for 24 hours at 2C. Chlorophyll concentrations in acetone were then analyzed on shipboard on a Turner 10AU fluorometer without acidification (Welschmeyer, 1994). The fluorometer was calibrated with a pure chlorophyll a standard obtained from Turner Designs, (Turner Designs Part No.10-850) before and after all sampling, with use of a secondary solid standard (Part No.10-AU-904) during sampling to identify any possible instrument drift. Salinity samples were collected in 200 mL type ll glass bottles with disposable plastic inserts and screw caps supplied by Ocean Scientific International Limited. They were analyzed in a temperature-controlled lab on a Guildline 8400B Salinometer (S/N 68572) standardized with IAPSO standard seawater 1 month after collection. Full details including a duplicate analysis are in file "2010 SWL Salt Data.xls". Nutrient samples (nitrate+nitrite, orthophosphate and silicate) were analysed at the University of Maryland Center for Environmental Science (UMCE). Samples were filtered from the Niskin bottles using GF/F and frozen at -20C for analysis at UMCE about 3 months after collection using a Technicon Bran & Luebbe AutoAnalyzer II sampler, following methods listed on http://nasl.cbl.umces.edu/ Nitrate+Nitrite2: Filtered samples are passed through a granulated copper-cadmium column to reduce nitrate to nitrite. The nitrite (originally present plus reduced nitrate) then is determined by diazotizing with sulfanilamide and coupling with N-1- naphthylethylenediamine dihydrochloride to form a colored azo dye. Nitrate concentration is obtained by subtracting the corresponding nitrite value from the nitrite + nitrate concentration. See Technicon Ind. Method No.158-71, 1977 and USEPA 1979 Method 353.2. Silicate2: This reaction is based on the reduction of silicomolybdate in acidic solution to “molybdenum blue” by ascorbic acid. Oxalic acid is added to minimize interference from phosphates. See Technicon Ind. Method No.811-86T,1986. Phosphate2: Filtered samples are mixed with a sulfuric acid-antimony-molybdate solution, and subsequently with an ascorbic acid solution, yielding an intense blue color suitable for photometric measurement. See Technicon Ind. Method No.155-71W, 1973, 1971 USEPA 1979 Method 365.1 and Froelich, 1978. Dissolved inorganic carbon (DIC) was determined using coulometric analysis. Total alkalinity (Alk) was determined by potentiometric titration. Detailed documentation on the DIC and ALK sampling, analysis and precision estimates can be found in file “2010-05-DIC and ALK data.xlsx.” Oxygen isotopic analysis water samples were collected in 10 or 20 mL glass scintillation vials, sealed with Polyseal caps and wrapped with Parafilm as a precaution to prevent evaporation and isotopic fractionation. Samples were returned to the Chesapeake Biological Laboratory of the University of Maryland Center for Environmental Science. Water samples were analyzed by equilibration with carbon dioxide using a Thermo Fisher Gas Bench II peripheral linked to a continuous flow Delta V Plus isotope ratio mass spectrometer. The oxygen isotope composition is referenced to Vienna-Standard Mean Ocean Water (V-SMOW): (V-SMOW): d18O = ((Rsample-Rstandard) / Rstandard) *1000 per mille, where R=18O/16O and V-SMOW is Vienna Standard Mean Ocean Water, as distributed by the International Atomic Energy Agency. Analytical precision was better than ±0.1 per mille and was assessed by analysis of in-house water standards during sample analysis and calibration to international water isotope standards (V-SMOW, V-SLAP, GISP). Data corrections were made based upon analysis of the in-house standards relative to international standards, which were normalized as per recommendations of Paul et al. [2007]. References: *1. Barwell-Clarke, J. and Whitney, F. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. *2. Welschmeyer, N.A. 1994. Fluorometric analysis of chlorophyll a in the presence of chlorophyll b and pheopigments. Limnology and Oceanography 39 1985-1992. *3. DOE (1994) Handbook of methods for the analysis of the various parameters of the carbon dioxide system in sea water.Version 2, A. G. Dickson & C. Goyet, eds. 4. Paul, D., G. Skrzypek, and I. Forizs. 2007. Normalization of measured stable isotopic compositions to isotope reference scales - a review. Rapid Communications in Mass Spectrometry 21 (18): 3006-3014. 5. Froelich, P.N. and M.E.Q. Pilson. 1978. Systematic absorbance error with Technicon AutoAnalyzer II colorimeter. Water Res. 12:599-603. 6. Technicon Industrial Method No. 158-71 W/A† Tentative. 1977. Technical Industrial Systems. Tarrytown, New York, 10591. TechniconIndustrial Method No. 811-86T. November 1986. Technicon Industrial Systems. Tarrytown, New York, 10591. 7. Technicon Industrial Method No. 155-71W/Tentative. 1973. Technicon Industrial Systems. Tarrytown, New York, 10591. 8. USEPA. 1979. Method No. 365.2 in Methods for chemical analysis of water and wastes. United States Environmental Protection Agency, Office of Research and Development. Cincinnati, Ohio. Report No. EPA-600/4-79-020 March 1979. 460pp. USEPA. 1979. 9. Method No. 365.1 in Methods for chemical analysis of water and wastes. United States Environmental Protection Agency, Office of Research and Development. Cincinnati, Ohio. Report No. EPA-600/4-79-020 March 1979. 460pp. * For PDF versions of these papers see folder \\Cruise_Data\DOCUMENTS\Analysis Reference Papers (At the time of processing PDFs of papers referenced were not all were available, but some may have been added since then.) Data Processing Notes: ---------------------- Transmissivity, Fluorescence:SeaPoint, Fluorescence:WetLabs:CDOM, PAR and PAR:Reference data are nominal and unedited except that some records were removed in editing temperature and salinity. There was no calibration sampling for dissolved oxygen, so values are nominal and are reported with with 1 less significant figure than usual. A comparison of pre-cruise and post-cruise calibrations suggests the reported DO could be low by up to 5%, but the surface saturation of DO does look reasonable. A post-cruise calibration showed drift in the Salinity:T0:S0 channel to be no more than 0.0013;no recalibration was applied. An error in the PAR calibration parameters was found after conversion and corrected. For further processing details see the processing report 2010-05_Processing_Report.doc. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ----- ------------ ---- ------ ------------ PAR uE/m^2/sec 10 -99 () (0 1.5976) $END !1- 2- --3--- ---4---- --5-- ---6--- ---7--- --8--- --9--- ---10--- --11- -12- -13- -14- ---15--- 16 --17- 18 --19- 20 --21- 22 --23-- 24 !Bo Bo Pressu Temperat Trans Fluores Fluores PAR PAR: Salinity Oxyge Oxyg Numb Samp Salinity Fl Nitra Fl Silic Fl Phosp Fl Chloro Fl !tt tt re ure: missi cence: cence_ Refere :T0:C0 n: en:D er_o le_ :Bottle ag te_ ag ate ag hate ag phyll: ag !~u ~u Primary vity URU: CDOM: nce Disso isso ~bin Numb ~o plus_ ~t ~i ~p Extrac ~a !mb en Seapoin URU: lved: lved _rec er tt Nitri ri ca ha ted ct !er ce t Wetlabs SBE :SBE ords le te te te te ed !-- -- ------ -------- ----- ------- ------- ------ ------ -------- ----- ---- ---- ---- -------- -- ----- -- ----- -- ----- -- ------ -- *END OF HEADER 17 17 5.3 7.3516 41.7 4.961 3.559 0.0 2.2 32.5876 7.0 306. 241 141 32.5984 0 6.1 0 19.7 0 0.90 0 2.01 0 16 16 14.3 7.1282 44.3 4.299 3.576 0.0 2.2 32.6199 6.9 301. 241 140 32.6620 0 7.3 0 21.8 0 1.46 0 1.77 0 15 15 25.0 5.3140 52.8 2.080 3.837 0.0 2.2 32.8453 6.3 274. 241 139 32.8557 0 14.2 0 31.2 0 1.57 0 1.12 0 14 14 34.8 4.8804 57.0 0.653 3.781 0.0 2.2 32.9019 6.0 263. 241 138 32.9239 0 19.4 0 40.8 0 1.80 0 0.28 0 13 13 49.8 4.3710 58.5 0.080 3.689 0.0 2.2 32.9913 5.7 246. 241 137 32.9981 6 24.0 0 49.6 0 2.00 0 0.07 0 12 12 74.2 4.1584 58.9 0.054 3.660 0.0 2.2 33.0852 5.4 237. 241 136 33.1187 3 26.8 0 54.9 0 2.12 0 0.05 0 11 11 99.3 3.8829 58.6 0.048 3.586 0.0 2.2 33.1393 5.5 238. 241 135 33.1518 3 28.9 0 57.3 0 2.22 0 -99.00 0 10 10 125.1 3.7476 58.6 0.046 3.596 0.0 2.2 33.1859 5.5 239. 241 134 33.1886 0 30.3 0 59.3 0 2.26 0 -99.00 0 9 9 149.8 3.6008 59.1 0.046 3.589 0.0 2.2 33.2555 5.4 235. 241 133 33.2668 3 31.4 0 61.8 0 2.26 0 -99.00 0 8 8 174.7 3.5417 59.1 0.045 3.625 0.0 2.2 33.3028 5.2 227. 241 132 33.3136 0 32.0 0 64.2 0 2.32 0 -99.00 0 7 7 200.7 3.4704 59.2 0.044 3.678 0.0 2.2 33.3464 5.1 220. 241 131 33.3650 3 32.0 0 66.2 0 2.41 0 -99.00 0 6 6 224.9 3.5147 59.2 0.046 3.640 0.0 2.2 33.3999 4.7 205. 241 130 33.4118 0 33.5 0 69.7 0 2.45 0 -99.00 0 5 5 249.7 3.5731 59.2 0.045 3.751 0.0 2.2 33.4529 4.4 189. 241 129 33.4578 0 33.8 0 70.4 0 2.49 0 -99.00 0 4 4 349.8 3.8006 59.3 0.047 4.013 0.0 2.2 33.6607 2.9 125. 241 128 33.6646 0 38.1 0 84.3 0 2.75 0 -99.00 0 3 3 499.8 3.7106 60.0 0.048 4.172 0.0 2.2 33.9223 1.5 65. 241 127 33.9318 6 41.5 0 101.1 0 2.99 0 -99.00 0 2 2 755.5 3.3455 60.1 0.050 4.352 0.0 2.2 34.1739 0.6 25. 241 126 34.1848 3 44.1 0 125.0 0 3.14 0 -99.00 0 1 1 1001.1 2.9583 60.4 0.048 4.396 0.0 2.2 34.3228 0.4 18. 241 125 34.3326 0 44.3 0 140.2 0 3.17 0 -99.00 0