*2010/09/02 14:10:32.74 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2009/06/20 20:51:59.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 37 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 5E690B6B NUMBER OF CHANNELS : 8 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 3.2 38.7 2 Temperature:Primary 'deg C (ITS90)' 7.9363 12.4848 3 Fluorescence:URU:Seapoint mg/m^3 0.37 1.726 4 Oxygen:Dissolved:SBE mL/L 2.99 7.66 5 Oxygen:Dissolved:SBE umol/kg 130.2 334.1 6 Salinity:T0:C0 PSS-78 31.9236 32.7647 7 Number_of_bin_records n/a 14 33 8 Transmissivity %/metre 33.649 52.877 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F ' ' 3 4 -99 ' ' 7 F ' ' 2 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 9 F ' ' 4 7 ' ' ' ' 5 I I 0 8 -99 ' ' 6 F ' ' 1 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2009-09\Pro Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0109.avg ------------------------------------------------------------------- This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2009-09\Pro $END *ADMINISTRATION MISSION : 2009-09 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : LD3 EVENT NUMBER : 109 LATITUDE : 48 56.54000 N ! (deg min) LONGITUDE : 125 50.25000 W ! (deg min) WATER DEPTH : 48 ALTIMETER (M) : 8.77 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2038 conductivity:primary ' ' 2128 pressure ' ' 63507 temperature:secondary ' ' 2449 conductivity:secondary ' ' 2424 Fluorometer ' ' Seapoint transmissometer:primary ' ' 1005 Oxygen:SBE ' ' 0997 altimeter: ' ' ' ' irradiance:primary ' ' 4615 pH ' ' 0692 surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE V 7.16 Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0109.avg ------------------------------------------------------------------- SOFTWARE VERSION SEASAVE V 7.16 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2009/07/31 13:05:14 3671 3671 CLEAN 5.0.2 2009/07/31 13:56:33 ? ? SHIFTDAT 3.4 2009/08/07 10:21:13 3667 3667 SHIFTDAT 3.4 2009/08/07 11:07:09 3667 3667 SHIFTDAT 3.4 2009/08/07 11:53:21 3667 3667 SHIFTDAT 3.4 2009/08/07 12:40:29 3667 3667 DELETE 6.3 2009/08/07 13:25:18 3667 969 CTDEDIT 4.61 2009/08/13 14:05:22 969 850 CALIB 11.7 2009/08/13 16:07:15 850 850 FILTERS 4.3 2009/08/13 17:52:22 850 850 BINAVE 4.1.1 2009/08/13 18:03:45 850 37 REMOVECH 8.0 2009/08/14 10:32:44 37 37 CHGUNITS 3.0 2009/08/14 10:34:34 37 37 REORDER 1.2.1 2009/08/14 10:36:20 ? ? HDREDIT2 2.5.1 2009/08/14 11:08:31 ? ? REMOVECH 8.0 2009/11/16 10:04:38 37 37 MERGE 3.3 2009/11/16 10:14:37 37 37 CALIB 11.7 2010/08/18 13:47:52 37 37 HDREDIT2 2.5.1 2010/08/18 14:30:15 ? ? HDREDIT2 2.5.1 2010/09/02 14:10:32 ? ? $END $REMARKS -CLEAN functions: 2009/07/31 13:05:26 20 Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint [mg/m^3] # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.70 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 60.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 28.62 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CTDEDIT 2009/08/13 14:05:22 119 records were deleted in this editing session. 73 changes in channel Salinity:T0:C0 -CALIB parameters: 2009/08/13 16:07:15 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2009-09\Processing\doc\2009-09-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.3000000E+00 0.1000000E+01 14 Oxygen:Dissolved:SBE mL/L 10 -0.3050000E-01 0.1052800E+01 15 Salinity:T0:C0 PSS-78 10 0.2000000E-01 0.1000000E+01 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2009/08/14 10:32:44 11 channels removed. -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2009/08/14 11:08:31 Applied edit header: Q:\Cruise_Data_Processing\2009-09\Processing\doc\2009-09-HDR.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 4: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 5: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 -REMOVECH 2009/11/16 10:04:38 1 channels removed. -The following MERGE parameters were used: 2009/11/16 10:13:48 2009/11/16 10:13:52 2009/11/16 10:13: Merge Channel: Pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Transmissivity Primary file : Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0109.rem Secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0109.avg Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0109.avg ------------------------------------------------------------------- -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 28.62 dbars Sample interval (from FILE section of header) = 0.042 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -CALIB parameters: 2010/08/18 13:47:52 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\Trans Cor\2009-09\DOC\2009-09-recal-tr.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Transmissivity %/metre 10 0.0000000E+00 0.1265000E+01 -HEADER EDITS: 2010/08/18 14:30:15 Applied edit header: Q:\Cruise_Data_Processing\Trans Cor\2009-09\DOC\Trans_Correction1.TXT -HEADER EDITS: 2010/09/02 14:10:32 Channel 8: Transmissivity [%/metre] Format: F7.2 ==> F6.1 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2009-09\2009-09-0109.hex Software Version Seasave V 7.16 Temperature SN = 2038 Conductivity SN = 2128 Number of Bytes Per Scan = 40 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Jun 20 2009 20:19:19 NMEA Latitude = 48 56.54 N NMEA Longitude = 125 50.25 W NMEA UTC (Time) = Jun 20 2009 20:51:59 Store Lat/Lon Data = Append to Every Scan Tully Cruise: 2009-09 Station: LD3 Latitude: Longitude: Depth (m): 48 # nquan = 17 # nvalues = 3671 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = par: PAR/Irradiance, Biospherical/Licor # name 10 = altM: Altimeter [m] # name 11 = dz/dtM: Descent Rate [m/s] # name 12 = pumps: Pump Status # name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 14 = sal00: Salinity [PSU] # name 15 = sal11: Salinity, 2 [PSU] # name 16 = flag: flag # span 0 = 1, 3671 # span 1 = 1.085, 38.619 # span 2 = 7.9303, 12.6424 # span 3 = 7.9298, 12.6342 # span 4 = 3.406419, 3.737926 # span 5 = 3.408195, 3.739349 # span 6 = 64.4721, 77.8962 # span 7 = 2.8938e-01, 2.1355e+00 # span 8 = 1.4650, 3.2137 # span 9 = 1.0000e-12, 1.0000e-12 # span 10 = 0.00, 100.00 # span 11 = -1.382, 1.436 # span 12 = 0, 1 # span 13 = 2.84216, 7.40263 # span 14 = 31.6980, 32.7514 # span 15 = 31.7585, 32.7683 # span 16 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Jun 20 2009 20:19:19 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2038, 06 May 08 # sensor 1 = Frequency 1 conductivity, primary, 2128, 30-Jan-09, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 2449, 06 May 08 # sensor 4 = Frequency 4 conductivity, secondary, 2424, 07 May 08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005, 28-Dec-06 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 0997, 01-Mar-08p # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4615, 15-Dec-00 # sensor 10 = Extrnl Volt 7 pH, 0692, 06-feb-09 # sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Jul 31 2009 09:11:34, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2009-09\RAW\CTD\2009-09-0109.hex Q:\Crui se_Data_Processing\2009-09\Processing\doc\2009-09-ctd1.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = yes # wildedit_date = Jul 31 2009 09:46:50, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2009-09\Processing\convert\2009-09-010 9.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Jul 31 2009 10:04:35, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2009-09\Processing\wildedit\2009-09-0109 .cnv # celltm_alpha = 0.0300, 0.0200 # celltm_tau = 9.0000, 7.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Jul 31 2009 10:36:32, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2009-09\Processing\celltm\2009-09-0109.c nv Q:\Cruise_Data_Processing\2009-09\Processing\doc\2009-09-ctd1.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* CTDEDIT was used to remove surface records to 2.6db and records corrupted by shed wakes around 7db; salinity was cleaned. --------------------------------------------------------------------- Transmissivity and fluorescence are nominal and unedited except that some records were removed in editing temperature and salinity. The precision of the SBE Dissolved Oxygen channel is difficult to estimate because the comparison with bottles was very noisy, but roughly, the SBE Dissolved Oxygen data should be considered: • ±0.4ml/l from 0- 150db • ±0.08ml/l from 150- 450db • ±0.04ml/l from 450-2000db • ±0.1ml/l below 2000db Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0109.avg ------------------------------------------------------------------- SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2009-09\2009-09-0109.hex Software Version Seasave V 7.16 Temperature SN = 2038 Conductivity SN = 2128 Number of Bytes Per Scan = 40 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Jun 20 2009 20:19:19 NMEA Latitude = 48 56.54 N NMEA Longitude = 125 50.25 W NMEA UTC (Time) = Jun 20 2009 20:51:59 Store Lat/Lon Data = Append to Every Scan Tully Cruise: 2009-09 Station: LD3 Latitude: Longitude: Depth (m): 48 # nquan = 4 # nvalues = 3671 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 3 = flag: 0.000e+00 # span 0 = 1, 3671 # span 1 = 1.085, 38.619 # span 2 = 66.7897, 80.6617 # span 3 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Jun 20 2009 20:19:19 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2038, 06 May 08 # sensor 1 = Frequency 1 conductivity, primary, 2128, 30-Jan-09, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 2449, 06 May 08 # sensor 4 = Frequency 4 conductivity, secondary, 2424, 07 May 08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005, 15-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 0997, 01-Mar-08p # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4615, 15-Dec-00 # sensor 10 = Extrnl Volt 7 pH, 0692, 06-feb-09 # sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Nov 16 2009 09:35:41, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2009-09\RAW\CTD\2009-09-0109.hex Q:\Crui se_Data_Processing\2009-09\Processing\doc\2009-09-ctd3.con # datcnv_skipover = 0 # file_type = ascii END* ********************************************************************************* Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by a correction factor, which was based on assumptions that deep offshore transmissivity from a June 2009 cruise should be about 62%/m and that drift was linear with time between March 2008 and July 2009. The corrections produced reasonable results for all cruises in that time period. For details on how the correction factor was derived see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should be considered estimates. ********************************************************************************* *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0.3 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.305E-01 1.0528) Salinity:T0:C0 PSS-78 10 -99 () (0.2E-01 1) Transmissivity %/metre 10 -99 () (0 1.265) $END !--1--- ---2---- ---3--- --4--- --5-- ---6---- -7-- --8-- !Pressu Temperat Fluores Oxygen Oxyge Salinity Numb Trans !re ure: cence: : n: :T0:C0 er_o missi ! Primary URU: Dissol Disso ~bin vity ! Seapoin ved: lved: _rec ! t SBE SBE ords !------ -------- ------- ------ ----- -------- ---- ----- *END OF HEADER 3.2 12.4767 1.178 7.66 334.1 31.9298 23 33.7 4.0 12.4848 1.298 7.63 332.6 31.9276 21 34.7 5.0 12.2780 1.602 7.49 326.3 31.9236 26 34.5 6.0 12.0950 1.598 7.20 313.8 31.9345 29 36.6 7.2 11.6501 1.634 6.93 301.9 31.9663 14 38.2 7.9 11.5422 1.698 6.69 291.6 31.9600 30 41.5 9.0 11.0655 1.726 6.32 275.3 31.9737 21 43.6 10.0 10.8960 1.605 5.98 260.8 31.9768 19 44.8 11.0 10.2489 1.413 5.71 248.9 32.0282 22 48.2 12.0 10.0673 1.360 5.57 242.6 32.0431 25 49.0 13.0 9.9682 1.481 5.47 238.5 32.0573 27 49.1 14.0 9.8603 1.395 5.35 233.1 32.0759 27 49.5 15.0 9.7447 1.367 5.22 227.3 32.1026 23 49.3 16.0 9.6261 1.373 5.07 221.1 32.1285 21 49.1 17.0 9.5274 1.479 4.86 211.9 32.1544 20 48.7 18.0 9.3424 1.095 4.62 201.2 32.2155 19 50.3 19.0 9.0209 0.884 4.41 192.2 32.3246 20 51.7 20.0 8.9459 0.777 4.31 187.6 32.3446 24 52.5 21.0 8.8877 0.713 4.21 183.3 32.3603 26 52.9 22.0 8.7401 0.646 4.06 176.7 32.4154 24 52.5 23.0 8.6327 0.555 3.95 172.2 32.4531 20 52.9 24.0 8.5800 0.477 3.90 169.9 32.4735 19 52.8 25.0 8.5584 0.523 3.88 168.7 32.4819 18 52.9 26.0 8.5435 0.492 3.85 167.7 32.4883 18 52.8 27.0 8.5198 0.476 3.83 166.8 32.4986 17 52.9 28.0 8.4999 0.497 3.80 165.6 32.5074 17 52.8 29.0 8.4752 0.457 3.77 164.2 32.5173 17 52.8 30.0 8.4262 0.461 3.73 162.5 32.5311 19 52.5 31.0 8.3795 0.439 3.67 160.0 32.5466 19 52.5 32.0 8.3329 0.410 3.61 157.1 32.5676 23 52.5 33.0 8.2819 0.412 3.52 153.3 32.5901 28 52.2 34.0 8.2275 0.401 3.42 148.8 32.6147 30 51.9 35.0 8.1538 0.460 3.29 143.1 32.6455 25 51.6 36.0 8.0583 0.402 3.17 137.9 32.6859 24 51.1 37.0 8.0108 0.403 3.09 134.4 32.7115 25 50.5 38.0 7.9782 0.465 3.02 131.5 32.7339 33 49.8 38.7 7.9363 0.370 2.99 130.2 32.7647 27 49.0