*2010/09/02 14:10:32.60 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2009/06/20 18:40:41.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 82 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 29002B42 NUMBER OF CHANNELS : 8 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 3.2 83.6 2 Temperature:Primary 'deg C (ITS90)' 7.3964 13.7576 3 Fluorescence:URU:Seapoint mg/m^3 0.211 3.647 4 Oxygen:Dissolved:SBE mL/L 2.38 7.33 5 Oxygen:Dissolved:SBE umol/kg 103.4 319.7 6 Salinity:T0:C0 PSS-78 31.7377 33.133 7 Number_of_bin_records n/a 5 29 8 Transmissivity %/metre 32.637 56.0395 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 8 F ' ' 3 4 -99 ' ' 7 F ' ' 2 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 9 F ' ' 4 7 ' ' ' ' 5 I I 0 8 -99 ' ' 6 F ' ' 1 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2009-09\Pro Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0106.avg ------------------------------------------------------------------- This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2009-09\Pro $END *ADMINISTRATION MISSION : 2009-09 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : LD5 EVENT NUMBER : 106 LATITUDE : 48 49.71000 N ! (deg min) LONGITUDE : 126 3.55000 W ! (deg min) WATER DEPTH : 93 ALTIMETER (M) : 8 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2038 conductivity:primary ' ' 2128 pressure ' ' 63507 temperature:secondary ' ' 2449 conductivity:secondary ' ' 2424 Fluorometer ' ' Seapoint transmissometer:primary ' ' 1005 Oxygen:SBE ' ' 0997 altimeter: ' ' ' ' irradiance:primary ' ' 4615 pH ' ' 0692 surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE V 7.16 Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0106.avg ------------------------------------------------------------------- SOFTWARE VERSION SEASAVE V 7.16 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2009/07/31 13:05:04 5189 5189 CLEAN 5.0.2 2009/07/31 13:56:24 ? ? SHIFTDAT 3.4 2009/08/07 10:21:05 5157 5157 SHIFTDAT 3.4 2009/08/07 11:07:01 5157 5157 SHIFTDAT 3.4 2009/08/07 11:53:12 5157 5157 SHIFTDAT 3.4 2009/08/07 12:40:18 5157 5157 DELETE 6.3 2009/08/07 13:25:13 5157 1669 CTDEDIT 4.61 2009/08/13 13:44:03 1669 1506 CALIB 11.7 2009/08/13 16:07:13 1506 1506 FILTERS 4.3 2009/08/13 17:52:20 1506 1506 BINAVE 4.1.1 2009/08/13 18:03:44 1506 82 REMOVECH 8.0 2009/08/14 10:32:44 82 82 CHGUNITS 3.0 2009/08/14 10:34:34 82 82 REORDER 1.2.1 2009/08/14 10:36:19 ? ? HDREDIT2 2.5.1 2009/08/14 11:08:31 ? ? REMOVECH 8.0 2009/11/16 10:04:38 82 82 MERGE 3.3 2009/11/16 10:14:37 82 82 CALIB 11.7 2010/08/18 13:47:51 82 82 HDREDIT2 2.5.1 2010/08/18 14:30:15 ? ? HDREDIT2 2.5.1 2010/09/02 14:10:32 ? ? $END $REMARKS -CLEAN functions: 2009/07/31 13:05:26 20 Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint [mg/m^3] # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.70 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 60.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 73.88 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CTDEDIT 2009/08/13 13:44:03 163 records were deleted in this editing session. 96 changes in channel Salinity:T0:C0 -CALIB parameters: 2009/08/13 16:07:13 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2009-09\Processing\doc\2009-09-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.3000000E+00 0.1000000E+01 14 Oxygen:Dissolved:SBE mL/L 10 -0.3050000E-01 0.1052800E+01 15 Salinity:T0:C0 PSS-78 10 0.2000000E-01 0.1000000E+01 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2009/08/14 10:32:44 11 channels removed. -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2009/08/14 11:08:31 Applied edit header: Q:\Cruise_Data_Processing\2009-09\Processing\doc\2009-09-HDR.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 4: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 5: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 -REMOVECH 2009/11/16 10:04:38 1 channels removed. -The following MERGE parameters were used: 2009/11/16 10:13:48 2009/11/16 10:13:52 2009/11/16 10:13: Merge Channel: Pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Transmissivity Primary file : Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0106.rem Secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0106.avg Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0106.avg ------------------------------------------------------------------- -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 73.88 dbars Sample interval (from FILE section of header) = 0.042 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -CALIB parameters: 2010/08/18 13:47:51 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\Trans Cor\2009-09\DOC\2009-09-recal-tr.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Transmissivity %/metre 10 0.0000000E+00 0.1265000E+01 -HEADER EDITS: 2010/08/18 14:30:15 Applied edit header: Q:\Cruise_Data_Processing\Trans Cor\2009-09\DOC\Trans_Correction1.TXT -HEADER EDITS: 2010/09/02 14:10:32 Channel 8: Transmissivity [%/metre] Format: F7.2 ==> F6.1 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2009-09\2009-09-0106.hex Software Version Seasave V 7.16 Temperature SN = 2038 Conductivity SN = 2128 Number of Bytes Per Scan = 40 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Jun 20 2009 18:06:32 NMEA Latitude = 48 49.71 N NMEA Longitude = 126 03.55 W NMEA UTC (Time) = Jun 20 2009 18:40:41 Store Lat/Lon Data = Append to Every Scan Tully Cruise: 2009-09 Station: LD5 Latitude: Longitude: Depth (m): 93 # nquan = 17 # nvalues = 5189 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = par: PAR/Irradiance, Biospherical/Licor # name 10 = altM: Altimeter [m] # name 11 = dz/dtM: Descent Rate [m/s] # name 12 = pumps: Pump Status # name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 14 = sal00: Salinity [PSU] # name 15 = sal11: Salinity, 2 [PSU] # name 16 = flag: flag # span 0 = 1, 5189 # span 1 = 0.957, 83.879 # span 2 = 7.3885, 13.7626 # span 3 = 7.3855, 13.7621 # span 4 = 3.367102, 3.818260 # span 5 = 3.369520, 3.819657 # span 6 = 68.4426, 78.7943 # span 7 = 1.9780e-01, 3.9744e+00 # span 8 = 1.2462, 3.1429 # span 9 = 1.0000e-12, 1.0000e-12 # span 10 = 0.00, 100.00 # span 11 = -1.731, 1.729 # span 12 = 0, 1 # span 13 = 2.23953, 6.99697 # span 14 = 31.6135, 33.1195 # span 15 = 31.6097, 33.1354 # span 16 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Jun 20 2009 18:06:32 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2038, 06 May 08 # sensor 1 = Frequency 1 conductivity, primary, 2128, 30-Jan-09, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 2449, 06 May 08 # sensor 4 = Frequency 4 conductivity, secondary, 2424, 07 May 08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005, 28-Dec-06 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 0997, 01-Mar-08p # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4615, 15-Dec-00 # sensor 10 = Extrnl Volt 7 pH, 0692, 06-feb-09 # sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Jul 31 2009 09:11:33, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2009-09\RAW\CTD\2009-09-0106.hex Q:\Crui se_Data_Processing\2009-09\Processing\doc\2009-09-ctd1.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = yes # wildedit_date = Jul 31 2009 09:46:49, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2009-09\Processing\convert\2009-09-010 6.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Jul 31 2009 10:04:34, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2009-09\Processing\wildedit\2009-09-0106 .cnv # celltm_alpha = 0.0300, 0.0200 # celltm_tau = 9.0000, 7.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Jul 31 2009 10:36:31, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2009-09\Processing\celltm\2009-09-0106.c nv Q:\Cruise_Data_Processing\2009-09\Processing\doc\2009-09-ctd1.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* CTDEDIT was used to remove surface records to 2.6db and records corrupted by shed wakes from the bottom of the cast; salinity was cleaned lightly. --------------------------------------------------------------------- Transmissivity and fluorescence are nominal and unedited except that some records were removed in editing temperature and salinity. The precision of the SBE Dissolved Oxygen channel is difficult to estimate because the comparison with bottles was very noisy, but roughly, the SBE Dissolved Oxygen data should be considered: • ±0.4ml/l from 0- 150db • ±0.08ml/l from 150- 450db • ±0.04ml/l from 450-2000db • ±0.1ml/l below 2000db Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0106.avg ------------------------------------------------------------------- SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2009-09\2009-09-0106.hex Software Version Seasave V 7.16 Temperature SN = 2038 Conductivity SN = 2128 Number of Bytes Per Scan = 40 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Jun 20 2009 18:06:32 NMEA Latitude = 48 49.71 N NMEA Longitude = 126 03.55 W NMEA UTC (Time) = Jun 20 2009 18:40:41 Store Lat/Lon Data = Append to Every Scan Tully Cruise: 2009-09 Station: LD5 Latitude: Longitude: Depth (m): 93 # nquan = 4 # nvalues = 5189 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 3 = flag: 0.000e+00 # span 0 = 1, 5189 # span 1 = 0.957, 83.879 # span 2 = 70.8927, 81.5897 # span 3 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Jun 20 2009 18:06:32 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2038, 06 May 08 # sensor 1 = Frequency 1 conductivity, primary, 2128, 30-Jan-09, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 2449, 06 May 08 # sensor 4 = Frequency 4 conductivity, secondary, 2424, 07 May 08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005, 15-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 0997, 01-Mar-08p # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4615, 15-Dec-00 # sensor 10 = Extrnl Volt 7 pH, 0692, 06-feb-09 # sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Nov 16 2009 09:35:41, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2009-09\RAW\CTD\2009-09-0106.hex Q:\Crui se_Data_Processing\2009-09\Processing\doc\2009-09-ctd3.con # datcnv_skipover = 0 # file_type = ascii END* ********************************************************************************* Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by a correction factor, which was based on assumptions that deep offshore transmissivity from a June 2009 cruise should be about 62%/m and that drift was linear with time between March 2008 and July 2009. The corrections produced reasonable results for all cruises in that time period. For details on how the correction factor was derived see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should be considered estimates. ********************************************************************************* *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0.3 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.305E-01 1.0528) Salinity:T0:C0 PSS-78 10 -99 () (0.2E-01 1) Transmissivity %/metre 10 -99 () (0 1.265) $END !--1--- ---2---- ---3--- --4--- --5-- ---6---- -7-- --8-- !Pressu Temperat Fluores Oxygen Oxyge Salinity Numb Trans !re ure: cence: : n: :T0:C0 er_o missi ! Primary URU: Dissol Disso ~bin vity ! Seapoin ved: lved: _rec ! t SBE SBE ords !------ -------- ------- ------ ----- -------- ---- ----- *END OF HEADER 3.2 13.7560 0.857 7.26 316.7 31.7379 24 35.0 4.0 13.7570 0.902 7.26 316.4 31.7378 27 34.8 5.0 13.7576 0.981 7.25 316.3 31.7377 22 35.3 6.0 13.7531 1.191 7.28 317.3 31.7382 20 34.9 7.0 13.7093 1.476 7.31 318.8 31.7413 29 34.4 8.0 13.6822 1.950 7.30 318.6 31.7427 26 33.3 9.0 13.6572 2.357 7.30 318.5 31.7438 22 34.0 10.0 13.6286 2.719 7.33 319.5 31.7463 20 34.0 11.0 13.5969 3.397 7.33 319.6 31.7484 17 33.0 12.0 13.5573 3.385 7.33 319.7 31.7512 17 32.6 13.0 13.5128 3.388 7.33 319.7 31.7497 16 32.9 14.0 13.4891 3.371 7.31 318.7 31.7491 18 33.8 15.0 13.4400 3.170 7.28 317.6 31.7509 19 34.9 16.0 13.3636 3.412 7.25 316.0 31.7567 20 34.8 17.0 13.1141 3.647 7.03 306.5 31.7811 20 33.9 18.0 12.5340 3.431 6.66 290.2 31.8435 19 36.7 19.0 11.6137 3.310 6.39 278.4 31.9234 18 41.6 20.0 10.7766 2.408 6.22 271.1 31.9810 19 46.8 21.0 10.5067 1.946 6.08 264.8 31.9995 22 47.2 22.0 10.0830 1.539 5.93 258.6 32.0503 21 47.1 23.0 9.6084 1.280 5.77 251.4 32.1122 18 49.1 24.0 9.3483 1.101 5.53 240.9 32.1380 18 49.8 25.0 9.0840 0.898 5.26 229.0 32.1762 17 52.0 26.0 8.8389 0.812 5.01 218.3 32.2164 16 52.8 27.0 8.5881 0.724 4.84 210.6 32.2585 16 53.0 28.0 8.5258 0.632 4.73 205.9 32.2706 16 52.8 29.0 8.4436 0.598 4.63 201.5 32.2932 18 53.0 30.0 8.3693 0.591 4.49 195.6 32.3196 19 53.3 31.0 8.2656 0.477 4.34 188.9 32.3697 20 54.0 32.0 8.1937 0.415 4.19 182.3 32.4023 20 54.7 33.0 8.1285 0.369 4.02 175.0 32.4480 19 54.8 34.0 8.0984 0.331 3.90 169.9 32.4796 17 54.8 35.0 8.0657 0.300 3.86 167.9 32.4995 18 55.0 36.0 8.0436 0.300 3.84 167.3 32.5094 18 55.0 37.0 8.0302 0.287 3.85 167.7 32.5145 17 55.2 38.0 7.9776 0.270 3.87 168.3 32.5360 18 55.3 39.0 7.8898 0.255 3.88 169.1 32.5693 16 55.4 40.0 7.8520 0.249 3.90 169.7 32.5802 17 55.5 41.0 7.7831 0.233 3.90 170.0 32.6161 16 55.8 42.0 7.7427 0.227 3.91 170.4 32.6307 16 55.9 43.0 7.6441 0.223 3.92 170.9 32.6766 17 56.0 44.0 7.5400 0.222 3.93 171.2 32.7329 20 55.9 45.0 7.5202 0.248 3.95 171.9 32.7373 21 55.9 46.0 7.5079 0.242 3.95 171.9 32.7419 21 55.8 47.0 7.5039 0.229 3.89 169.5 32.7460 19 55.8 48.0 7.5175 0.224 3.79 165.0 32.7567 17 55.7 49.0 7.5291 0.225 3.62 157.6 32.7639 17 55.4 50.0 7.5839 0.239 3.45 150.2 32.7955 16 54.8 51.0 7.5830 0.233 3.38 147.3 32.8144 16 54.8 52.0 7.5652 0.231 3.47 151.0 32.8173 17 54.8 53.0 7.4909 0.229 3.65 158.8 32.8180 17 55.5 54.0 7.4345 0.241 3.77 164.2 32.8162 19 55.7 55.0 7.4269 0.231 3.77 164.2 32.8341 19 55.7 56.0 7.4340 0.211 3.69 160.5 32.8473 18 55.7 57.0 7.4395 0.213 3.58 155.8 32.8662 16 55.4 58.0 7.4387 0.215 3.48 151.4 32.8837 15 55.4 59.0 7.4402 0.230 3.35 145.9 32.8968 14 55.2 60.0 7.4496 0.222 3.16 137.7 32.9136 15 54.5 61.0 7.4813 0.221 2.92 127.0 32.9497 16 52.6 62.0 7.5285 0.216 2.69 116.9 32.9943 18 51.0 63.0 7.5451 0.235 2.56 111.4 33.0114 18 50.5 64.0 7.5431 0.239 2.52 109.6 33.0171 20 50.1 65.0 7.5365 0.221 2.51 109.3 33.0244 20 50.5 66.0 7.5354 0.214 2.51 109.4 33.0256 17 50.5 67.0 7.5251 0.222 2.52 109.7 33.0303 16 50.1 68.0 7.5132 0.219 2.53 109.9 33.0343 15 50.3 69.0 7.5067 0.221 2.52 109.8 33.0384 14 49.7 70.0 7.5067 0.321 2.52 109.5 33.0430 15 50.0 71.0 7.4979 0.318 2.51 109.3 33.0473 15 49.7 72.0 7.4943 0.277 2.51 109.3 33.0487 17 49.8 73.0 7.4904 0.256 2.50 108.9 33.0509 19 49.7 74.0 7.4852 0.229 2.49 108.5 33.0547 23 50.0 75.0 7.4816 0.232 2.48 108.1 33.0578 21 50.0 76.0 7.4729 0.239 2.46 107.0 33.0661 20 49.6 77.0 7.4453 0.235 2.44 106.0 33.0912 19 49.5 78.0 7.4435 0.238 2.43 105.6 33.0921 22 49.6 79.0 7.4470 0.253 2.42 105.3 33.0892 19 49.7 80.0 7.4310 0.252 2.41 104.8 33.1045 18 49.7 81.0 7.4297 0.243 2.40 104.4 33.1054 17 49.5 82.0 7.4221 0.247 2.38 103.8 33.1120 17 49.3 83.0 7.4113 0.248 2.38 103.4 33.1207 17 49.3 83.6 7.3964 0.242 2.38 103.7 33.1330 5 49.3