*2014/11/20 09:56:35.82 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2009/06/10 21:47:19.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 24 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : E50E9D52 NUMBER OF CHANNELS : 20 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 275 298 2 Pressure decibar 5.1 3685.8 3 Temperature:Primary 'deg C (ITS90)' 1.5732 11.2324 4 Fluorescence:URU:Seapoint mg/m^3 0.114 1.662 5 Salinity:T0:C0 PSS-78 32.4577 34.6688 6 Oxygen:Dissolved:SBE mL/L 0.25 7.33 7 Oxygen:Dissolved:SBE umol/kg 10.8 319.3 8 Bottle_Number n/a 1 24 9 Number_of_bin_records n/a 84 241 10 Salinity:Bottle PSS-78 32.459 34.6724 11 Flag:Salinity:Bottle n/a 12 Nitrate_plus_Nitrite umol/L 6.94118 46.48354 13 Flag:Nitrate_plus_Nitrite n/a 14 Silicate umol/L 11.6 183.8 15 Flag:Silicate n/a 16 Phosphate umol/L 0.925305 3.30233 17 Flag:Phosphate n/a 18 Transmissivity %/metre 54.5 62.9 19 Oxygen:Dissolved mL/L 0.274 7.334 20 Flag:Oxygen:Dissolved n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 9 F ' ' 4 6 -99 ' ' 7 F ' ' 2 7 -99 ' ' 6 F ' ' 1 8 -99 ' ' 3 I I 0 9 ' ' ' ' 5 I I 0 10 -99 ' ' 9 F R4 4 11 0 ' ' 3 NQ C ' ' 12 -99 ' ' 6 F R4 1 13 0 ' ' 3 NQ C ' ' 14 -99 ' ' 6 F R4 1 15 0 ' ' 3 NQ C ' ' 16 -99 ' ' 7 F R4 2 17 0 ' ' 3 NQ C ' ' 18 -99 ' ' 6 F ' ' 1 19 -99 ' ' ' ' f8.3 R4 ' ' 20 0 ' ' 3 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0043.sort -------------------------------------------------------------------------------------- This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2009-09\Pro $END *ADMINISTRATION MISSION : 2009-09 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : P16 EVENT NUMBER : 43 LATITUDE : 49 16.95000 N ! (deg min) LONGITUDE : 134 40.06000 W ! (deg min) WATER DEPTH : 3636 ALTIMETER (M) : 9.6 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2038 conductivity:primary ' ' 2128 pressure ' ' 63507 temperature:secondary ' ' 2449 conductivity:secondary ' ' 2424 Fluorometer ' ' Seapoint transmissometer:primary ' ' 1005 Oxygen:SBE ' ' 0997 altimeter: ' ' ' ' irradiance:primary ' ' 4615 pH ' ' 0692 surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE V 7.16 Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0043.sort -------------------------------------------------------------------- SOFTWARE VERSION SEASAVE V 7.16 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2009/08/01 11:15:08 5626 5626 CLEAN 5.0.2 2009/08/01 12:49:05 ? ? ADDSAMP 3.4 2009/08/01 14:24:32 5626 5626 BINAVE 4.1.1 2009/08/01 14:35:13 5626 24 MERGE 3.3 2009/09/11 13:39:04 24 24 CLEAN 5.0.2 2009/09/11 13:39:14 ? ? CALIB 11.7 2009/09/11 13:43:30 24 24 SORT 3.5 2009/09/11 13:53:36 24 24 REMOVECH 8.0 2009/09/11 14:07:59 24 24 CHGUNITS 3.0 2009/09/11 14:11:23 24 24 REORDER 1.2.1 2009/09/11 14:11:55 ? ? HDREDIT2 2.5.1 2009/09/11 14:12:59 ? ? REMOVECH 8.0 2009/11/16 10:50:39 24 24 MERGE 3.3 2009/11/16 10:54:13 24 24 HDREDIT2 2.5.1 2010/01/07 09:14:46 ? ? REMOVECH 8.0 2010/01/18 10:22:44 24 24 SORT 3.5 2010/01/18 10:27:00 24 24 MERGE 3.3 2010/01/18 10:42:31 24 24 SORT 3.5 2010/01/18 10:44:08 24 24 CALIB 11.7 2010/08/18 13:47:57 24 24 HDREDIT2 2.5.1 2010/08/18 14:29:05 ? ? HDREDIT2 2.5.1 2010/09/02 14:08:52 ? ? CALIB 11.7 2013/06/04 13:12:29 24 24 HDREDIT2 2.6 2013/07/08 08:49:06 ? ? CHANGE_FLAGS 1.0 2013/07/29 14:31:09 24 24 CHANGE_FLAGS 2.0 2014/11/20 09:56:35 24 24 $END $REMARKS -CLEAN functions: 2009/08/01 12:48:19 20 Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data_Processing\2009-09\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2009/09/11 13:38:59 2009/09/11 13:38:59 2009/09/11 13:38: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle [ ], Flag:Salinity:Bottle [ ], Chlorophyll:Extracted [ ], Flag:Chlorophyll:Extracted [ ], Oxygen:Dissolved [ ], Flag:Oxygen:Dissolved [ ], Nitrate_plus_Nitrite [umol/L], Flag:Nitrate_plus_Nitrite [ ], Silicate [umol/L], Flag:Silicate [ ], Phosphate [umol/L], Flag:Phosphate [ ], Dimethyl_Sulphide [nmol/L], Flag:Dimethyl_Sulphide [ ] Primary file : Q:\Cruise_Data_Processing\2009-09\Processing\hydro\NEW CHL\2009-09-0043.samavg Secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\hydro\NEW CHL\2009-09-0043.mrgcln1 -CLEAN functions: 2009/09/11 13:39:11 20 Remove Sea-Bird comments from the header. Remove remark heading: "Comments from secondary" -CALIB parameters: 2009/09/11 13:43:30 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2009-09\Processing\doc\2009-09-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Pressure dbars 10 0.3000000E+00 0.1000000E+01 15 Oxygen:Dissolved:SBE mL/L 10 -0.3050000E-01 0.1052800E+01 16 Salinity:T0:C0 PSS-78 10 0.2000000E-01 0.1000000E+01 -SORT parameters: 2009/09/11 13:53:36 Sorted in ascending order of channel Pressure -REMOVECH 2009/09/11 14:07:59 11 channels removed. -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2009/09/11 14:12:59 Applied edit header: Q:\Cruise_Data_Processing\2009-09\Processing\doc\2009-09-bot-hdr.txt Channel 2: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 5: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 7: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 9: Firing_Number [n/a] Name: Bottle_Number ==> Firing_Number Channel 11: Salinity:Bottle [PSS-78] Units: ==> PSS-78 Channel 12: Flag:Salinity:Bottle [n/a] Units: ==> n/a Channel 13: Oxygen:Dissolved [mL/L] Units: ==> mL/L Format: f8.3 ==> F8.3 Channel 14: Flag:Oxygen:Dissolved [n/a] Units: ==> n/a Channel 16: Flag:Nitrate_plus_Nitrite [n/a] Units: ==> n/a Channel 18: Flag:Silicate [n/a] Units: ==> n/a Channel 20: Flag:Phosphate [n/a] Units: ==> n/a -REMOVECH 2009/11/16 10:50:39 1 channels removed. -The following MERGE parameters were used: 2009/11/16 10:54:09 2009/11/16 10:54:09 2009/11/16 10:54: Merge Channel: Pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Transmissivity Primary file : Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0043.remb Secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0043.sort Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0043.sort -------------------------------------------------------------------- -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -SORT parameters: 2009/11/16 10:53:58 Sorted in ascending order of channel Pressure -HEADER EDITS: 2010/01/07 09:14:46 Channel 8: Bottle_Number [n/a] Name: Firing_Number ==> Bottle_Number -REMOVECH 2010/01/18 10:22:44 2 channels removed. -SORT parameters: 2010/01/18 10:27:00 Sorted in ascending order of channel Sample_Number -The following MERGE parameters were used: 2010/01/18 10:42:30 2010/01/18 10:42:30 2010/01/18 10:42: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Oxygen:Dissolved, Flag:Oxygen:Dissolved Primary file : Q:\Cruise_Data_Processing\2009-09\Processing\test\2009-09-0043.sort1 Secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\test\2009-09-0043.add -SORT parameters: 2010/01/18 10:44:08 Sorted in ascending order of channel Pressure -CALIB parameters: 2010/08/18 13:47:57 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\Trans Cor\2009-09\DOC\2009-09-recal-tr.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 18 Transmissivity %/metre 10 0.0000000E+00 0.1265000E+01 -HEADER EDITS: 2010/08/18 14:29:05 Applied edit header: Q:\Cruise_Data_Processing\Trans Cor\2009-09\DOC\Trans_Correction1.TXT -HEADER EDITS: 2010/09/02 14:08:52 Channel 18: Transmissivity [%/metre] Format: F7.2 ==> F6.1 -CALIB parameters: 2013/06/04 13:12:29 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = C:\DATA\Nutrients\doc\Nutrients-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 12 Nitrate_plus_Nitrite umol/L 10 0.1709000E+00 0.9812000E+00 16 Phosphate umol/L 10 0.4530000E-01 0.1011500E+01 -HEADER EDITS: 2013/07/08 08:49:06 Applied edit header: C:\DATA\Nutrients\doc\headedit-correction.txt $END *COMMENTS Sample_Number 292: Salinity: Minor outlier in comparison to CTD salinity. Sample_Number 275: Nutrients: Si rerun Sample_Number 276: Nutrients: Si rerun Sample_Number 277: Nutrients: Si rerun Sample_Number 278: Nutrients: Si rerun Sample_Number 279: Nutrients: Si rerun Sample_Number 280: Nutrients: Si rerun Analysis methods: ----------------- Chlorophyll samples were analyzed at sea using a Chemistry Turner Designs 10AU fluorometer which was calibrated on May 12, 2009 using pure chlorophyll a. Chlorophyll precision was determined by analyzing replicate samples drawn from one Niskin. For details see worksheet “Precision” in file QF 2009-09CHL.xls. Oxygen samples were analyzed at sea using an automated titration system consisting of a Brinkman Dosimat (model 665) and a PC 950 Colorimeter. For information on precision see file 2009-09_oxy_duplicates.xls. Salinity samples were collected in glass bottles and analyzed at IOS on a Guildline model 8400B Autosal standardized with IAPSO standard seawater. Samples from some casts were analyzed at sea on a Guildline Portasal; there are comments attached to those samples and all were flagged "d". See file 2009-09-salinity-duplicates.xls for information on AUtosal precision. Nutrient samples were collected in plastic tubes and analyzed fresh at sea using an Astoria autoanalyzer following methods described in Barwell-Clarke and Whitney (1996). For details on nutrient duplicates and precision see file QF2009-09nutsrev1jebc.xls. The minimum detectable level for DMS is 0.10 nM, so “0” values should be interpreted as <0.10. For details on the collection and analysis of the DMS data see file 2009-09 DMS Report.doc. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. J. Barwell-Clarke and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. ----------------------------------------------------------------------------------- Comments from secondary file: Q:\Cruise_Data_Processing\2009-09\Processing\trans\2009-09-0043.sort -------------------------------------------------------------------- SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2009-09\2009-09-0043.hex Software Version Seasave V 7.16 Temperature SN = 2038 Conductivity SN = 2128 Number of Bytes Per Scan = 40 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Jun 10 2009 21:48:12 NMEA Latitude = 49 16.95 N NMEA Longitude = 134 40.06 W NMEA UTC (Time) = Jun 10 2009 21:47:19 Store Lat/Lon Data = Append to Every Scan Tully Cruise: 2009-09 Station: P16 Latitude: Longitude: Depth (m): 3636 # nquan = 5 # nvalues = 5626 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 3 = nbf: number of bottles fired # name 4 = flag: 0.000e+00 # interval = seconds: 0.0416667 # start_time = Jun 10 2009 21:48:12 # sensor 0 = Frequency 0 temperature, primary, 2038, 06 May 08 # sensor 1 = Frequency 1 conductivity, primary, 2128, 30-Jan-09, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 2449, 06 May 08 # sensor 4 = Frequency 4 conductivity, secondary, 2424, 07 May 08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005, 15-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 0997, 01-Mar-08p # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4615, 15-Dec-00 # sensor 10 = Extrnl Volt 7 pH, 0692, 06-feb-09 # sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Nov 16 2009 10:45:48, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2009-09\RAW\CTD\2009-09-0043.hex Q:\Crui se_Data_Processing\2009-09\Processing\doc\2009-09-ctd3.con # datcnv_bottle_scan_range_source = BL file END* ********************************************************************************* Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by a correction factor, which was based on assumptions that deep offshore transmissivity from a June 2009 cruise should be about 62%/m and that drift was linear with time between March 2008 and July 2009. The corrections produced reasonable results for all cruises in that time period. For details on how the correction factor was derived see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should be considered estimates. ********************************************************************************* July 2013: A correction has been applied to Nitrate_plus_Nitrite and Phosphate data from deep-water cruises analyzed at IOS between 2009 and 2012. For details see the following report: Corrections to Nitrate and Phosphate for Deep-Water Cruises from 2009 to 2012.pdf which is stored in folder: \\Cruise_Data\DOCUMENTS\Analysis Reference Papers *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0.3 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.305E-01 1.0528) Salinity:T0:C0 PSS-78 10 -99 () (0.2E-01 1) Transmissivity %/metre 10 -99 () (0 1.265) Nitrate_plus_Nitrite umol/L 10 -99 () (0.1709 0.9812) Phosphate umol/L 10 -99 () (0.453E-01 1.0115) $END !-1-- --2--- ---3---- ---4--- ---5---- --6--- --7-- 8- -9-- ---10--- 11 --12- 13 --14- 15 --16-- 17 --18- ---19-- 20 !Samp Pressu Temperat Fluores Salinity Oxygen Oxyge Bo Numb Salinity Fl Nitra Fl Silic Fl Phosph Fl Trans Oxygen: Fl !le_ re ure: cence: :T0:C0 : n: tt er_o :Bottle ag te_ ag ate ag ate ag missi Dissolv ag !Numb Primary URU: Dissol Disso ~u ~bin ~o plus_ ~t ~i ~p vity ed ~o !er Seapoin ved: lved: mb _rec tt Nitri ri ca ha lv ! t SBE SBE er ords le te te te te ed !---- ------ -------- ------- -------- ------ ----- -- ---- -------- -- ----- -- ----- -- ------ -- ----- ------- -- *END OF HEADER 298 5.1 11.2324 0.382 32.4586 6.67 290.4 24 241 32.4590 0 6.9 0 11.7 0 0.93 0 54.9 6.701 0 297 10.3 11.0908 0.489 32.4577 6.70 291.7 23 241 32.4596 0 7.0 0 11.7 0 0.93 0 55.5 6.721 0 296 24.8 10.5562 0.800 32.4664 6.87 299.4 22 241 32.4664 0 7.3 0 11.6 0 0.95 0 54.9 6.993 0 295 50.4 7.6626 1.662 32.4928 7.33 319.3 21 241 32.4945 0 9.2 0 13.1 0 1.05 0 54.5 7.334 0 294 75.2 6.4859 0.821 32.5215 7.15 311.1 20 241 32.5219 0 11.3 0 14.7 0 1.19 0 58.4 7.133 0 293 99.9 6.0685 0.235 32.5553 7.00 304.7 19 241 32.5579 0 13.2 0 16.0 0 1.26 0 61.5 6.981 0 292 125.2 6.0309 0.158 32.8228 6.57 286.1 18 241 32.8439 3 16.1 0 20.7 0 1.39 0 61.9 6.521 0 291 149.8 5.9198 0.133 33.3603 5.77 251.0 17 241 33.3782 0 21.0 0 30.3 0 1.63 0 62.1 5.762 6 290 174.3 5.8215 0.125 33.6814 4.95 215.5 16 241 33.6883 0 25.0 0 39.7 0 1.87 0 62.1 4.944 0 289 200.3 5.6727 0.122 33.7827 4.25 184.8 15 241 33.7854 0 27.8 0 46.6 0 2.04 0 62.1 4.265 0 288 249.6 5.2412 0.123 33.8462 3.23 140.3 14 241 33.8439 0 32.5 0 59.0 0 2.39 0 62.0 3.225 0 287 299.3 4.9826 0.126 33.8795 2.52 109.6 13 241 33.8827 0 35.7 0 67.2 0 2.54 0 62.1 2.539 0 286 400.3 4.4643 0.126 33.9884 1.39 60.3 12 241 33.9906 0 41.0 0 87.7 0 2.97 0 62.5 1.408 0 285 599.9 3.8640 0.127 34.1352 0.58 25.1 11 241 34.1335 0 44.3 0 112.7 0 3.17 0 62.6 0.599 0 284 799.7 3.4977 0.127 34.2623 0.35 15.3 10 241 34.2622 0 45.4 0 130.3 0 3.24 0 62.7 0.389 0 283 999.7 3.0915 0.128 34.3575 0.25 10.8 9 241 34.3575 0 46.0 0 146.7 0 3.29 0 62.7 0.284 0 282 1249.8 2.7022 0.126 34.4364 0.28 12.0 8 241 34.4370 0 46.5 0 161.8 0 3.30 0 62.7 0.274 0 281 1500.2 2.3735 0.124 34.4992 0.50 21.6 7 241 34.5000 0 46.1 6 171.2 6 3.27 6 62.7 0.501 0 280 2000.9 1.9555 0.120 34.5872 1.31 57.0 6 241 34.5879 0 43.8 0 181.1 0 3.11 0 62.7 1.309 0 279 2500.3 1.7440 0.117 34.6293 1.94 84.1 5 241 34.6312 0 42.5 0 183.8 0 3.00 0 62.9 1.900 0 278 3001.3 1.6088 0.114 34.6541 2.49 108.0 4 241 34.6544 0 40.9 0 182.9 0 2.88 0 62.9 2.445 0 276 3501.1 1.5738 0.114 34.6660 2.78 120.9 2 84 34.6681 0 40.3 0 182.4 0 2.83 0 62.6 2.723 0 277 3501.4 1.5739 0.114 34.6660 2.78 120.9 3 240 34.6670 6 40.2 0 182.8 0 2.82 0 -99.0 2.729 0 275 3685.8 1.5732 0.115 34.6688 2.85 124.0 1 241 34.6724 0 40.0 0 183.5 0 2.80 0 62.1 2.859 0