*2024/03/26 11:32:14.71 *IOS HEADER VERSION 2.0 2016/04/28 2016/06/13 IVF16 *FILE START TIME : UTC 2009/05/27 15:54:25.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 46 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : C4B36F90 NUMBER OF CHANNELS : 10 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 3.4 48.5 2 Temperature:Primary 'deg C (ITS90)' 7.7089 9.5133 3 Transmissivity %/metre 8.1 53.1 4 Fluorescence:URU:Seapoint mg/m^3 0.371 11.408 5 PAR uE/m^2/sec 0 28.9 6 Oxygen:Dissolved:SBE mL/L 3.72 7.95 7 Oxygen:Dissolved:SBE umol/kg 162.0014 346.5797 8 Salinity:T0:C0 PSS-78 31.6676 32.709 9 Number_of_bin_records n/a 4 62 10 pH:SBE n/a 7.89 8.36 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 7 F ' ' 1 6 -99 ' ' 7 F ' ' 2 7 -99 ' ' 6 F ' ' 1 8 -99 ' ' 9 F ' ' 4 9 ' ' ' ' 5 I I 0 10 -99 ' ' 8 F ' ' 3 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2009-08\Pro Comments from secondary file: Q:\Cruise_Data_Processing\2009-08\Processing\ios\2009-08-0003.cln2 ------------------------------------------------------------------ This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2009-08\Pro $END *ADMINISTRATION MISSION : 2009-08 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : La Perouse SCIENTIST : Yelland D. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : WCVI STATION : LB02 EVENT NUMBER : 3 LATITUDE : 48 38.98000 N ! (deg min) LONGITUDE : 125 2.43000 W ! (deg min) WATER DEPTH : 55 ALTIMETER (M) : 7.08 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. Comments from secondary file: Q:\Cruise_Data_Processing\2009-08\Processing\ios\2009-08-0003.cln2 ------------------------------------------------------------------ Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2038 conductivity:primary ' ' 2128 pressure ' ' 63507 temperature:secondary ' ' 2449 conductivity:secondary ' ' 2424 Fluorometer ' ' Seapoint transmissometer:primary ' ' 1005 Oxygen:SBE ' ' 0997 altimeter: ' ' ' ' irradiance:primary ' ' 4615 pH ' ' 0692 surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE V 7.16 Comments from secondary file: Q:\Cruise_Data_Processing\2009-08\Processing\ios\2009-08-0003.cln2 ------------------------------------------------------------------ SOFTWARE VERSION SEASAVE V 7.16 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2009/11/30 17:34:03 10502 10502 CLEAN 5.0.2 2009/11/30 18:10:57 10463 10463 SHIFTDAT 3.4 2009/11/30 19:01:36 10463 10463 SHIFTDAT 3.4 2009/11/30 19:35:27 10463 10463 SHIFTDAT 3.4 2009/11/30 20:09:08 10463 10463 SHIFTDAT 3.4 2009/11/30 20:42:40 10463 10463 DELETE 6.3 2009/11/30 21:16:16 10463 1325 CTDEDIT 4.61 2009/12/02 17:15:23 1325 1114 CALIB 11.7 2009/12/08 14:53:22 1114 1114 CALIB 11.7 2009/12/08 17:00:54 1114 1114 FILTERS 4.3 2009/12/08 17:43:39 1114 1114 BINAVE 4.1.1 2009/12/08 17:54:09 1114 46 REMOVECH 8.0 2009/12/09 16:15:56 46 46 CHGUNITS 3.0 2009/12/09 16:21:51 46 46 REORDER 1.2.1 2009/12/09 16:26:09 ? ? HDREDIT2 2.5.1 2009/12/14 13:35:38 ? ? MERGE 3.3 2009/12/14 13:36:21 46 46 HDREDIT2 2.5.1 2009/12/14 13:40:31 ? ? CALIB 11.7 2010/08/18 13:37:50 46 46 HDREDIT2 2.5.1 2010/08/18 13:38:26 ? ? HDREDIT2 2.5.1 2010/09/02 14:05:09 ? ? REMOVECH 8.2 2024/03/26 10:05:09 46 46 CHGUNITS 3.2 2024/03/26 11:30:50 46 46 REORDER 1.3.1 2024/03/26 11:31:19 ? ? HDREDIT2 3.2 2024/03/26 11:32:14 ? ? $END $REMARKS -CLEAN functions: 2009/11/30 18:10:29 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.70 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 60.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 38.73 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CTDEDIT 2009/12/02 17:15:23 211 records were deleted in this editing session. 11 changes in channel Salinity:T0:C0 -CALIB parameters: 2009/12/08 14:53:22 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2009-08\Processing\doc\2009-08-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 15 Salinity:T0:C0 PSS-78 10 0.2000000E-01 0.1000000E+01 17 Oxygen:Dissolved:SBE mL/L 10 0.1980000E-01 0.1050900E+01 -CALIB parameters: 2009/12/08 17:00:54 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2009-08\Processing\doc\2009-08-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 17 Oxygen:Dissolved:SBE mL/L 10 -0.3630000E-01 0.9981000E+00 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure [dbars] Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2009/12/09 16:15:56 10 channels removed. -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2009/12/14 13:35:38 Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 4: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 5: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 6: pH:SBE [n/a] Units: pH Units ==> n/a Format: F7.2 ==> F8.3 Channel 7: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 -The following MERGE parameters were used: 2009/12/14 13:36:20 2009/12/14 13:36:21 2009/12/14 13:36: Merge Channel: Pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, Temperature:Primary, Transmissivity, Fluorescence:URU:Seapoint, PAR, Oxygen:Dissolved:SBE, Oxygen:Dissolved:SBE, Salinity:T0:C0, Number_of_bin_records Secondary Channels to Include: pH:SBE Primary file : Q:\Cruise_Data_Processing\2009-08\Processing\ios\2009-08-0003.ctd Secondary file: Q:\Cruise_Data_Processing\2009-08\Processing\ios\2009-08-0003.cln2 Comments from secondary file: Q:\Cruise_Data_Processing\2009-08\Processing\ios\2009-08-0003.cln2 ------------------------------------------------------------------ -CLEAN functions: 2009/11/30 18:10:29 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.70 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 60.00 -The following SHIFT parameters were used. Shift Channel: pH:SBE [pH Units] # of Records to Advance (-ve for Delay): At REC# 0 Shift= 60.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 38.73 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CLEAN functions: 2009/12/14 13:34:31 20 Remove Sea-Bird comments from the header. -HEADER EDITS: 2009/12/14 13:40:31 Applied edit header: Q:\Cruise_Data_Processing\2009-08\Processing\doc\2009-08-HDR2.TXT Channel 10: pH:SBE [n/a] Units: pH Units ==> n/a Format: F7.2 ==> F8.3 -CALIB parameters: 2010/08/18 13:37:50 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\Trans Cor\2009-08\DOC\2009-08-recal-tr.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Transmissivity %/metre 10 0.0000000E+00 0.1247000E+01 -HEADER EDITS: 2010/08/18 13:38:26 Applied edit header: Q:\Cruise_Data_Processing\Trans Cor\2009-08\DOC\Trans_Correction1.TXT -HEADER EDITS: 2010/09/02 14:05:09 Channel 3: Transmissivity [%/metre] Format: F7.2 ==> F6.1 -REMOVECH 2024/03/26 10:05:09 The following CHANNEL(S) were removed: Oxygen:Dissolved:SBE [mL/L] -CHANGE units: Temperature reference channel: Temperature:Primary Salinity reference channel: Salinity:T0:C0 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2024/03/26 11:32:14 Channel 7: Oxygen:Dissolved:SBE [umol/kg] Name: Oxygen:Dissolved ==> Oxygen:Dissolved:SBE $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2009-08\2009-08-0003.hex Software Version Seasave V 7.16 Temperature SN = 2038 Conductivity SN = 2128 Number of Bytes Per Scan = 40 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = May 27 2009 15:54:21 NMEA Latitude = 48 38.98 N NMEA Longitude = 125 02.43 W NMEA UTC (Time) = May 27 2009 15:54:25 Store Lat/Lon Data = Append to Every Scan Tully Cruise: 2009-08 Station: LB02 Latitude: Longitude: Depth (m): 55 After reboot # nquan = 18 # nvalues = 10502 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = par: PAR/Irradiance, Biospherical/Licor # name 10 = ph: pH # name 11 = altM: Altimeter [m] # name 12 = dz/dtM: Descent Rate [m/s] # name 13 = pumps: Pump Status # name 14 = sal00: Salinity [PSU] # name 15 = sal11: Salinity, 2 [PSU] # name 16 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 17 = flag: flag # span 0 = 1, 10502 # span 1 = 1.610, 48.728 # span 2 = 7.5991, 9.7183 # span 3 = 7.5948, 9.7156 # span 4 = 3.375463, 3.453708 # span 5 = 3.376046, 3.453627 # span 6 = 34.6102, 80.9316 # span 7 = 3.0403e-01, 1.4707e+01 # span 8 = 1.6372, 3.4506 # span 9 = 1.0000e-12, 1.7597e+03 # span 10 = 7.876, 8.451 # span 11 = 0.00, 100.00 # span 12 = -1.122, 1.501 # span 13 = 0, 1 # span 14 = 31.6295, 32.8061 # span 15 = 31.6219, 32.8112 # span 16 = 3.35807, 8.43927 # span 17 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = May 27 2009 15:54:21 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2038, 06 May 08 # sensor 1 = Frequency 1 conductivity, primary, 2128, 30-Jan-09, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 2449, 06 May 08 # sensor 4 = Frequency 4 conductivity, secondary, 2424, 07 May 08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005, 05-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 0997, 01-Mar-08p # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4615, 15-Dec-00 # sensor 10 = Extrnl Volt 7 pH, 0692, 06-feb-09 # sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Nov 16 2009 15:20:22, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2009-08\RAW\CTD\2009-08-0003.hex Q:\Crui se_Data_Processing\2009-08\Processing\doc\2009-08-ctd.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = yes # wildedit_date = Nov 30 2009 15:20:53, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2009-08\Processing\convert\2009-08-000 3.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m ph # wildedit_excl_bad_scans = yes # celltm_date = Nov 30 2009 15:28:32, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2009-08\Processing\wildedit\2009-08-0003 .cnv # celltm_alpha = 0.0300, 0.0200 # celltm_tau = 9.0000, 7.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Nov 30 2009 15:37:37, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2009-08\Processing\celltm\2009-08-0003.c nv Q:\Cruise_Data_Processing\2009-08\Processing\doc\2009-08-ctd.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* CTDEDIT was used to remove some surface records and records corrupted by shed wakes around 5 and 48db and from the bottom of the cast; salinity was cleaned lightly. The pH channel was not aligned in the original processing, so was reprocessed and merged with the other data. --------------------------------------------------------------------- Transmissivity, fluorescence, PAR and pH are nominal and unedited except that some records were removed in editing temperature and salinity. The precision of the SBE dissolved oxygen channel is estimated, roughly, to be: • ±0.5ml/l from 0 - 175db • ±0.2ml/l from 175 - 500db • ±0.1ml/l below 500db ********************************************************************************* Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by a correction factor, which was based on assumptions that deep offshore transmissivity from a June 2009 cruise should be about 62%/m and that drift was linear with time between March 2008 and July 2009. The corrections produced reasonable results for all cruises in that time period. For details on how the correction factor was derived see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should be considered estimates. ********************************************************************************* *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Salinity:T0:C0 PSS-78 10 -99 () (0.2E-01 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.198E-01 1.0509) Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.363E-01 0.9981) Transmissivity %/metre 10 -99 () (0 1.247) $END !--1--- ---2---- --3-- ---4--- --5--- --6--- --7-- ---8---- -9-- ---10-- !Pressu Temperat Trans Fluores PAR Oxygen Oxyge Salinity Numb pH:SBE !re ure: missi cence: : n: :T0:C0 er_o ! Primary vity URU: Dissol Disso ~bin ! Seapoin ved: lved: _rec ! t SBE SBE ords !------ -------- ----- ------- ------ ------ ----- -------- ---- ------- *END OF HEADER 3.4 9.5130 8.1 9.748 28.9 7.95 346.6 31.6687 5 8.360 4.0 9.5133 9.9 10.388 25.5 7.92 345.3 31.6683 40 8.360 4.8 9.4860 10.2 11.340 15.8 7.82 340.9 31.6676 30 8.360 7.0 9.4751 13.8 11.408 5.2 7.63 332.6 31.6717 27 8.330 8.0 9.4666 14.0 11.186 3.8 7.54 328.7 31.6761 28 8.330 9.0 9.4576 14.3 10.631 2.8 7.48 326.1 31.6865 29 8.320 10.0 9.4521 14.6 10.810 2.2 7.43 323.9 31.6938 25 8.310 11.0 9.4457 15.6 10.262 1.7 7.41 323.0 31.7000 22 8.310 12.0 9.4366 15.0 10.481 1.2 7.40 322.6 31.7165 20 8.300 13.0 9.4378 15.1 10.444 0.8 7.35 320.4 31.7282 27 8.300 14.0 9.4341 15.3 10.012 0.6 7.28 317.3 31.7409 31 8.290 15.0 9.4211 15.5 9.662 0.4 7.17 312.6 31.7489 27 8.280 16.0 9.3893 16.6 9.324 0.3 7.03 306.4 31.7712 24 8.270 17.0 9.3463 18.1 8.489 0.2 6.89 300.3 31.8041 21 8.260 18.0 9.3207 19.3 8.299 0.2 6.79 296.0 31.8219 22 8.260 19.0 9.3017 19.7 8.231 0.1 6.72 292.9 31.8339 24 8.250 20.0 9.2827 20.5 8.038 0.1 6.61 288.1 31.8457 27 8.240 21.0 9.1823 23.4 6.941 0.1 6.36 277.2 31.8781 25 8.210 22.0 9.0297 28.1 5.987 0.0 6.02 262.4 31.9190 23 8.170 23.0 8.8290 35.8 4.405 0.0 5.73 249.7 31.9827 23 8.150 24.0 8.7187 37.2 3.958 0.0 5.55 241.9 32.0208 22 8.130 25.0 8.6699 38.3 3.514 0.0 5.43 236.6 32.0410 21 8.110 26.0 8.6189 39.5 3.145 0.0 5.28 230.1 32.0586 20 8.090 27.0 8.4834 43.4 2.403 0.0 5.05 220.0 32.0913 20 8.060 28.0 8.3463 47.9 1.644 0.0 4.79 208.7 32.1378 23 8.040 29.0 8.1482 51.9 1.070 0.0 4.58 199.5 32.2547 26 8.000 30.0 8.1019 52.5 0.960 0.0 4.48 195.2 32.2885 27 7.990 31.0 8.0842 52.5 0.810 0.0 4.44 193.4 32.3036 22 7.970 32.0 8.0561 52.9 0.657 0.0 4.37 190.4 32.3266 20 7.960 33.0 8.0176 53.1 0.484 0.0 4.27 186.0 32.3606 18 7.960 34.0 7.9459 53.0 0.440 0.0 4.19 182.5 32.4280 17 7.950 35.0 7.9088 53.0 0.435 0.0 4.14 180.3 32.4684 17 7.940 36.0 7.8975 52.9 0.444 0.0 4.12 179.5 32.4844 17 7.940 37.0 7.8948 52.6 0.401 0.0 4.10 178.6 32.4888 21 7.930 38.0 7.8910 52.6 0.371 0.0 4.10 178.6 32.4957 23 7.930 39.0 7.8906 52.5 0.377 0.0 4.09 178.1 32.4967 24 7.930 40.0 7.8892 52.4 0.412 0.0 4.08 177.7 32.5000 19 -99.000 41.0 7.8797 52.1 0.416 0.0 4.07 177.3 32.5149 18 -99.000 42.0 7.8746 52.1 0.416 0.0 4.06 176.8 32.5231 17 -99.000 43.0 7.8744 51.9 0.389 0.0 4.05 176.4 32.5239 11 -99.000 44.0 7.8731 52.0 0.401 0.0 4.05 176.4 32.5262 17 -99.000 45.0 7.8716 52.0 0.397 0.0 4.04 176.0 32.5285 17 -99.000 46.0 7.8614 51.6 0.422 0.0 4.03 175.5 32.5426 25 7.930 47.1 7.8468 51.5 0.423 0.0 3.98 173.3 32.5614 48 7.930 48.1 7.7566 50.8 0.385 0.0 3.80 165.5 32.6582 62 7.900 48.5 7.7089 50.5 0.426 0.0 3.72 162.0 32.7090 4 7.890