*2019/03/01 14:49:49.41 *IOS HEADER VERSION 2.0 2016/04/28 2016/06/13 IVF16 *FILE START TIME : UTC 2009/09/04 19:37:07.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 1 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 3FBFD7BF NUMBER OF CHANNELS : 16 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Bottle:Firing_Sequence n/a 1 1 2 Bottle_Number n/a 1 1 3 Pressure decibar 86.857 86.857 4 Depth metres 85.95 85.95 5 Temperature:Secondary 'deg C (ITS90)' 0.645E-01 0.645E-01 6 Transmissivity %/metre 56.7 56.7 7 Fluorescence:URU:Seapoint mg/m^3 0.658 0.658 8 PAR:Reference uE/m^2/sec 523.522 523.522 9 Salinity:T1:C1 PSS-78 31.4674 31.4674 10 Oxygen:Dissolved:SBE mL/L 7.144 7.144 11 Oxygen:Dissolved:SBE umol/kg 311.0732 311.0732 12 Conductivity:Secondary S/m 2.645206 2.645206 13 Sample_Number n/a 4 4 14 Number_of_bin_records n/a 241 241 15 Salinity:Bottle PSS-78 31.4595 31.4595 16 Flag:Salinity:Bottle ' ' $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 3 I I 0 2 -99 ' ' 3 I I 0 3 -99 ' ' 7 F ' ' 1 4 -99 ' ' 7 F ' ' 1 5 -99 ' ' 9 F ' ' 4 6 -99 ' ' 6 F ' ' 1 7 -99 ' ' 8 F ' ' 3 8 -99 ' ' 7 F ' ' 1 9 -99 ' ' 9 F ' ' 4 10 -99 ' ' 7 F ' ' 2 11 -99 ' ' 6 F ' ' 1 12 -99 ' ' 10 F ' ' 6 13 -99 ' ' 5 I I 0 14 0 ' ' 5 I I 0 15 -99 ' ' 9 F R4 4 16 0 ' ' 3 NQ C ' ' $END $REMARKS Data quality is expressed with the following flags ---------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). ---------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2007-007 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : C3O / Bellot SCIENTIST : Vagle S. PLATFORM : Sir Wilfrid Laurier *LOCATION GEOGRAPHIC AREA : Bellot Strait STATION : BEL8 EVENT NUMBER : 4 LATITUDE : 71 59.79000 N ! (deg min) LONGITUDE : 94 24.96000 W ! (deg min) WATER DEPTH : 98 ALTIMETER (M) : 1.27 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0941 $TABLE: SENSORS ! Name Abs Depth Serial No ! --------------------------------- -------------- ---------- Temperature ' ' 03P5048 Conductivity ' ' 3579 'Pressure:Digiquartz with TC' ' ' 0941 Temperature:2 ' ' 03P5073 Conductivity:2 ' ' 3581 Fluorometer:Seapoint ' ' 2336 Transmissometer:Chelsea/Seatech ' ' CST-993-DR 'Oxygen:SBE 43' ' ' 1117 Altimeter ' ' 1252 'User Polynomial' ' ' 5 'User Polynomial:2' ' ' 5 Unavailable ' ' ' ' 'SPAR/Surface Irradiance' ' ' 20281 $END $REMARKS Software Version Seasave V 7.18c $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 4.2.2 2019/02/27 09:09:50 241 241 CLEAN 5.2.3 2019/02/27 09:11:47 241 241 ADDSAMP 3.6 2019/02/27 09:21:20 241 241 BINAVE 4.2 2019/02/27 09:21:28 241 1 MERGE 3.5 2019/02/27 09:22:43 1 1 CLEAN 5.2.3 2019/02/27 10:01:05 1 1 MERGEHDR 1.3 2019/03/01 14:48:55 1 1 SORT 3.6 2019/03/01 14:49:15 1 1 REMOVECH 8.2 2019/03/01 14:49:19 1 1 CHGUNITS 3.1.1 2019/03/01 14:49:29 1 1 REORDER 1.3.1 2019/03/01 14:49:46 ? ? HDREDIT2 3.1.1 2019/03/01 14:49:49 ? ? $END $REMARKS -CLEAN functions: 2019/02/27 09:11:47 20 Reset #RECS, MIN & MAX values in header. Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: P:\Cruise_Data_Processing\2009-007\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2019/02/27 09:22:43 Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Sample_number, Bottle_Number, Salinity:Bottle, Flag:Salinity:Bottle, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Phaeo-Pigment:Extracted, Carbon:Dissolved:Inorganic, Flag:Carbon:Dissolved:Inorganic, Alkalinity:Total, Flag:Alkalinity:Total, Temperature:Draw Primary file : P:\Cruise_Data_Processing\2009-007\Processing\hydro\2009-007-0004.samavg Secondary file: P:\Cruise_Data_Processing\2009-007\Processing\hydro\2009-007-0004.mrgcln1s Comments from secondary file: P:\Cruise_Data_Processing\2009-007\Processing\hydro\2009-007-0004.mrgcln1s -------------------------------------------------------------------------- -SORT parameters: 2019/02/27 09:22:16 Sorted in ascending order of channel Bottle_Number -CLEAN functions: 2019/02/27 10:01:05 20 Reset #RECS, MIN & MAX values in header. Change character data from " " to "0" in channels Flag:* Delete Empty Channels: 0 deleted. Set event to last 4 characters of file name -SORT parameters: 2019/03/01 14:49:15 Sorted in ascending order of channel Pressure [decibar] -REMOVECH 2019/03/01 14:49:19 The following CHANNEL(S) were removed: Scan_Number Temperature:Primary [deg C (ITS90)] Conductivity:Primary [S/m] Oxygen:Voltage:SBE [volts] Descent_Rate [m/s] Altimeter [metres] Status:Pump Salinity:T0:C0 [PSS-78] upoly0 upoly1 Flag -CHANGE units: Temperature reference channel: Temperature:Secondary [deg C (ITS90)] Salinity reference channel: Salinity:T1:C1 'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L to umol/kg -HEADER EDITS: 2019/03/01 14:49:49 Applied edit header: P:\Cruise_Data_Processing\2009-007\Processing\doc\HYDRO\2009-07-bot-hdr.txt Channel 1: Bottle:Firing_Sequence [n/a] Name: Bottle_Number ==> Bottle:Firing_Sequence Channel 2: Bottle_Number [n/a] Name: Bottle:Position ==> Bottle_Number Channel 3: Pressure [decibar] Format: F10.3 ==> F7.1 Channel 4: Depth [metres] Name: Depth:Salt_Water ==> Depth Format: F10.3 ==> F7.1 Channel 8: PAR:Reference [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 9: Salinity:T1:C1 [PSS-78] Format: F11.4 ==> F9.4 Channel 10: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 12: Conductivity:Secondary [S/m] Format: F11.6 ==> F10.6 Channel 14: Number_of_bin_records [n/a] Pad: ' ' ==> 0 Channel 15: Salinity:Bottle [PSS-78] Units: ==> PSS-78 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\2009-07_SWL\CTD_RAW\2009_07_0004.hex Software Version Seasave V 7.18c Temperature SN = 03P5048 Conductivity SN = 3579 Number of Bytes Per Scan = 44 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 Append System Time to Every Scan System UpLoad Time = Sep 04 2009 19:43:30 NMEA Latitude = 71 59.79 N NMEA Longitude = 094 24.96 W NMEA UTC (Time) = Sep 04 2009 19:37:07 Store Lat/Lon Data = Append to Every Scan cruise : 2009-07 ship : SWL Latitude : 71 59.2 Longitude : 94 52.00 Depth : Bel 8 # nquan = 22 # nvalues = 241 # units = specified # name 0 = scan: Scan Count # name 1 = bpos: Bottle Position in Carousel # name 2 = nbf: Bottles Fired # name 3 = prDM: Pressure, Digiquartz [db] # name 4 = depSM: Depth [salt water, m] # name 5 = t090C: Temperature [ITS-90, deg C] # name 6 = t190C: Temperature, 2 [ITS-90, deg C] # name 7 = c0S/m: Conductivity [S/m] # name 8 = c1S/m: Conductivity, 2 [S/m] # name 9 = xmiss: Beam Transmission, Chelsea/Seatech [%] # name 10 = flSP: Fluorescence, Seapoint # name 11 = spar: SPAR/Surface Irradiance # name 12 = sbeox0V: Oxygen raw, SBE 43 [V] # name 13 = dz/dtM: Descent Rate [m/s] # name 14 = altM: Altimeter [m] # name 15 = pumps: Pump Status # name 16 = sal00: Salinity, Practical [PSU] # name 17 = sal11: Salinity, Practical, 2 [PSU] # name 18 = sbeox0ML/L: Oxygen, SBE 43 [ml/l] # name 19 = upoly0: Upoly 0, RINKO DO # name 20 = upoly1: Upoly 1, Rinko Temperature # name 21 = flag: 0.000e+00 # interval = seconds: 0.0416667 # start_time = Sep 04 2009 19:43:30 [System UTC, first data scan.] # bad_flag = -9.990e-29 # # # # # 03P5048 # 21-Feb-09 (NEW) # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.33963972e-003 # 6.38237635e-004 # 2.14568182e-005 # 1.92278300e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 3579 # 18-Mar-09 NEW # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -9.40926076e+000 # 1.16721072e+000 # -1.50128503e-003 # 1.54791246e-004 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 0941 # 16-Mar-09 NEW # -4.259763e+004 # -9.844260e-001 # 1.376490e-002 # 3.562200e-002 # 0.000000e+000 # 3.042047e+001 # -6.119116e-004 # 4.117890e-006 # 3.466810e-009 # 1.00000000 # 0.00000 # 0.000000e+000 # 1.280700e-002 # -9.240716e+000 # # # # # # 03P5073 # 21-Feb-09 (NEW) # 1 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.000 # 4.38618572e-003 # 6.43082943e-004 # 2.26999825e-005 # 2.12839597e-006 # 1000.000 # 1.00000000 # 0.0000 # # # # # # 3581 # 17-Mar-09 NEW # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -9.27592928e+000 # 1.14184226e+000 # -1.44332095e-003 # 1.50803123e-004 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 2336 # # # 1 # 0.000 # # # # # # CST-993-DR # 30-Jun-09 # 20.0910 # -1.1780 # 0.250 # # # # # # 1117 # 03-Feb-09 # 1 # # # 0.0000 # 0.0000e+000 # 0.0000 # 0.00e+000 # 0.0000 # 0.0 # # # # 3.9950e-001 # -0.5173 # -2.6392e-003 # 1.9854e-004 # -3.4703e-006 # 2.5826e+000 # 1.92630e-004 # -4.64800e-002 # 3.6000e-002 # 1.5600 #

-3.3000e-002

#

5.0000e+003

#

1.4500e+003

# # # # # # # 1252 # # 15.000 # 0.000 # # # # # # 5 # 25 June 2009 # RINKO DO # 0.00000000 # 1.00000000 # 0.00000000 # 0.00000000 # # # # # # 5 # 25 June 2009 # Rinko Temperature # 1.00000000 # 0.00000000 # 0.00000000 # 0.00000000 # # # # # # # # # # # # # # # 20281 # 9 Apr 2007 # 1784.00000000 # 1.00000000 # # # # datcnv_date = Feb 26 2019 15:29:40, 7.23.2 # datcnv_in = P:\Cruise_Data_Processing\2009-007\RAW\CTD\2009_07_0004.hex P:\Cru ise_Data_Processing\2009-007\Processing\doc\2009-07-ctd.CON # datcnv_ox_hysteresis_correction = no # datcnv_ox_tau_correction = yes # datcnv_bottle_scan_range_source = BL file # datcnv_scans_per_bottle = 241 END* Analysis methods: ----------------- Salinity samples were collected in 200 mL type II glass bottles with screw cap and disposable plastic inserts supplied by Ocean Scientific International Limited. They were analyzed 4 months after collection in a temperature-controlled lab at the Institute of Ocean Sciences on a Guildline 8400B Autosal Salinometer model 8400B (s/n 69086) standardized with IAPSO standard seawater. For details see report "QF Cruise-2009-07 SWL SAL_Arctic*.xlsx" --------------------------------------------------------------------------------------- CTD Data Processing Notes: ---------------------- Transmissivity, Fluorescence:SeaPoint and PAR:Reference are nominal and unedited except that some records were removed in editing temperature and salinity. There was no calibration sampling for dissolved oxygen but the sensor had been calibrated very recently and the surface % saturation values were reasonable. The post-cruise factory calibration indicates salinity drift was insignificant. A Rinko III Dissolved oxygen sensor was mounted on the CTD, but the data from that instrument have not been processed for the OSD Data Archive. Sarah Zimmermann did a quick comparison of the Rinko data with the SBE43 data and details can be found in report 2009-07 RINKO SBE oxygen sensor comparison*.docx. For further processing details see the processing report 2009-07_Processing_Report.doc. --------------------------------------------------------------------------------------- !1- 2- --3--- --4--- ---5---- --6-- ---7--- --8--- ---9---- --10-- --11- ----12--- -13- -14- ---15--- 16 !Bo Bo Pressu Depth Temperat Trans Fluores PAR: Salinity Oxygen Oxyge Conductiv Samp Numb Salinity Fl !tt tt re ure: missi cence: Refere :T1:C1 : n: ity: le_ er_o :Bottle ag !~u ~u Secondar vity URU: nce Dissol Disso Secondary Numb ~bin ~o !en mb y Seapoin ved: lved: er _rec tt !ce er t SBE SBE ords le !-- -- ------ ------ -------- ----- ------- ------ -------- ------ ----- --------- ---- ---- -------- -- *END OF HEADER 1 1 86.9 86.0 0.0645 56.7 0.658 523.5 31.4674 7.14 311.1 2.645206 4 241 31.4595 0