*2015/07/24 08:27:36.52 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2008/10/14 19:09:53.000 TIME INCREMENT : 0 0 0 1 0 ! (day hr min sec ms) NUMBER OF RECORDS : 20 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 8C3F228F NUMBER OF CHANNELS : 9 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 2 21 2 Temperature:Primary 'deg C (ITS90)' 9.2013 9.4762 3 Transmissivity %/metre 73.6 74.5 4 Fluorescence:URU:Seapoint mg/m^3 0.387 0.518 5 Turbidity:Seapoint FTU 3.204 4.921 6 Salinity:T0:C0 PSS-78 31.7784 31.8691 7 Oxygen:Dissolved:SBE mL/L 4.64984 5.02424 8 Oxygen:Dissolved:SBE umol/kg 202.592 218.92 9 Number_of_bin_records n/a 1 3 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 7 F ' ' 1 6 -99 ' ' 9 F ' ' 4 7 -99 ' ' 7 F ' ' 2 8 -99 ' ' 6 F ' ' 1 9 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2008-64\Pro $END *ADMINISTRATION MISSION : 2008-64 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Buoyancy Current Study SCIENTIST : Morrison J. PLATFORM : Achiever *LOCATION GEOGRAPHIC AREA : B.C.Coast STATION : 62 EVENT NUMBER : 93 LATITUDE : 50 46.26500 N ! (deg min) LONGITUDE : 127 29.19300 W ! (deg min) WATER DEPTH : 23 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 4057 $TABLE: SENSORS ! Name Abs Depth Serial No ! --------------------------------- -------------- ---------- Temperature ' ' 4057 Conductivity ' ' 4057 'Pressure:Strain Gauge' ' ' 4057 'Oxygen:SBE 43' ' ' 0052 Transmissometer:Chelsea/Seatech ' ' 163 Fluorometer:Seapoint ' ' 2805 'Turbidity Meter:Seapoint' ' ' 10133 $END $REMARKS SOFTWARE VERSION 1.24 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.4.1 2015/07/20 15:18:58 170 170 CLEAN 5.2.1 2015/07/20 15:19:12 170 170 MERGEHDR 1.3 2015/07/20 15:20:13 170 170 CLIP 1.3 2015/07/21 15:11:20 170 111 DELETE 6.3 2015/07/22 09:25:22 111 44 CTDEDIT 5.0.4 2015/07/23 10:25:48 44 34 BINAVE 4.2 2015/07/23 11:15:44 34 20 REMOVECH 8.2 2015/07/23 11:48:05 20 20 CHGUNITS 3.1 2015/07/23 11:48:48 20 20 REORDER 1.3.1 2015/07/23 11:50:22 ? ? CALIB 11.8.1 2015/07/23 14:45:14 20 20 HDREDIT2 3.0.2 2015/07/24 08:27:36 ? ? $END $REMARKS -CLEAN functions: 2015/07/20 15:19:02 20 Reset #RECS, MIN & MAX values in header. Set event to last 4 characters of file name -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Scan_Number Min,Max = 60.000, 50000.000 Time Not Available in File -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 11.10 dbars Sample interval (from FILE section of header) = 1.000 seconds. -CTDEDIT v5.0.4 2015/07/23 10:25:48 10 records were deleted in this editing session. 3 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2015/07/23 11:48:05 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Oxygen:Voltage:SBE [volts] Descent_Rate [m/s] Depth:Salt_Water [metres] Flag -CHANGE units: Temperature reference channel: Temperature Salinity reference channel: Salinity:T0:C0 'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L to umol/kg -CALIB parameters: 2015/07/23 14:45:14 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2008-64\Processing\doc\2008-64-recal1.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 7 Oxygen:Dissolved:SBE [mL/L] mL/L 10 0.0000000E+00 0.1040000E+01 8 Oxygen:Dissolved:SBE [umol/kg umol/kg 10 0.0000000E+00 0.1040000E+01 -HEADER EDITS: 2015/07/24 08:27:36 Applied edit header: P:\Cruise_Data_Processing\2008-64\Processing\doc\2008-64-ctd-hdr.txt Channel 1: Pressure [decibar] Format: F11.2 ==> F7.1 Channel 7: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 5: Turbidity:Seapoint [FTU] Format: F8.3 ==> F7.1 $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\science\My Documents\achiever\Casts\event 93.hex Software Version 1.24 Temperature SN = 4057 Conductivity SN = 4057 System UpLoad Time = Oct 14 2008 21:05:16 AchieverOct08 stn62 SeacatPlus V 1.6 SERIAL NO. 4057 14 Oct 2008 21:04:30 vbatt = 10.9, vlith = 8.8, ioper = 62.7 ma, ipump = 98.6 ma, iext01 = 16.8 ma iext23 = 20.0 ma status = not logging number of scans to average = 4 samples = 122670, free = 318404, casts = 132 mode = profile, minimum cond freq = 2000, pump delay = 10 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 870.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = yes, Ext Volt 1 = yes, Ext Volt 2 = yes, Ext Volt 3 = yes echo commands = yes output format = raw HEX cast 129 14 Oct 2008 19:09:53 samples 119586 to 119755, avg = 4, stop = mag sw itch S> # nquan = 13 # nvalues = 170 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = xmiss: Beam Transmission, Chelsea/Seatech [%] # name 5 = flSP: Fluorescence, Seapoint # name 6 = sbeox0V: Oxygen raw, SBE 43 [V] # name 7 = seaTurbMtr: Turbidity, Seapoint [FTU] # name 8 = dz/dtM: Descent Rate [m/s] # name 9 = sal00: Salinity, Practical [PSU] # name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 0.5 # name 11 = depSM: Depth [salt water, m], lat = 50 # name 12 = flag: flag # span 0 = 1, 170 # span 1 = 0.107, 21.104 # span 2 = 7.2656, 9.4807 # span 3 = 0.001845, 3.457054 # span 4 = 11.9459, 92.9040 # span 5 = 8.0110e-03, 6.4508e-01 # span 6 = 2.6481, 4.2635 # span 7 = 0.000, 23.537 # span 8 = -0.609, 0.646 # span 9 = 0.0142, 31.8710 # span 10 = 3.9564, 8.8384 # span 11 = 0.106, 20.922 # span 12 = 0.0000e+00, 0.0000e+00 # interval = seconds: 1 # start_time = Oct 14 2008 19:09:53 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 4057 # 11-Dec-09 # 1.27353200e-003 # 2.54456499e-004 # 9.66424282e-007 # 1.15595175e-007 # 1.00000000 # 0.0000 # # # # # # 4057 # 11-Dec-09 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -9.80645600e-001 # 1.35752600e-001 # -3.21709900e-004 # 4.24780700e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 4057 # 10-Dec-09 # -3.14205200e-002 # 2.66910600e-003 # -6.70134500e-012 # -6.17351500e+001 # 5.21613200e+001 # -7.45227300e-003 # 5.19351200e+005 # -4.35554100e+000 # 2.16284100e-001 # 2.49637500e+001 # -8.50000000e-004 # 0.00000000e+000 # 0.000000 # # # # # # 0052 # 8 Apr 2008 # 1 # # # 0.0000 # 0.0000e+000 # 0.0000 # 0.00e+000 # 0.0000 # 0.0 # # # # 2.9350e-001 # -0.5953 # -8.1689e-004 # 1.3186e-004 # -3.0669e-006 # 2.5826e+000 # 1.92634e-004 # -4.64803e-002 # 3.6000e-002 # 1.0300 #

-3.3000e-002

#

5.0000e+003

#

1.4500e+003

# # # # # # # 163 # 30 April 2008 # 20.2010 # -0.0280 # 0.250 # # # # # # 2805 # # # 0 # 0.000 # # # # # # 10133 # # # 0 # 1.000 # # # # datcnv_date = Jul 20 2015 15:16:21, 7.23.2 [datcnv_vars = 9] # datcnv_in = P:\Cruise_Data_Processing\2008-64\RAW\CTD\Casts\2008-64-0093.hex P :\Cruise_Data_Processing\2008-64\Processing\doc\2008-64-ctd.xmlcon # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # filter_date = Jul 20 2015 15:16:59, 7.23.2 # filter_in = P:\Cruise_Data_Processing\2008-64\Processing\convert\2008-64-0093. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 0.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = # alignctd_date = Jul 20 2015 15:17:24, 7.23.2 # alignctd_in = P:\Cruise_Data_Processing\2008-64\Processing\filter\2008-64-0093 .cnv # alignctd_adv = tv290C 0.500, sbeox0V 2.500 # Derive_date = Jul 20 2015 15:18:19, 7.23.2 [derive_vars = 3] # Derive_in = P:\Cruise_Data_Processing\2008-64\Processing\align\2008-64-0093.cn v P:\Cruise_Data_Processing\2008-64\Processing\doc\2008-64-ctd.xmlcon # derive_time_window_docdt = seconds: 0.5 # derive_ox_tau_correction = yes # file_type = ascii END* Remarks from CTDEDIT: CTDEDIT was used to remove some records from the top of the cast; salinity was cleaned lightly. Data Processing --------------- SeaCat salinity is prone to error due to a mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. Such errors are likely to be larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05 units in areas of high gradients. For these data the descent rate was very noisy for a few casts in the middle part of the cruise, but quite steady for most casts and temperature and salinity gradients were not extreme, so the error is likely much smaller than that. Salinity calibration sampling was done but no analysis results could be found at the time of processing. Post-cruise calibration results for salinity suggest that salinity calibration is well within +/- 0.002. There was no dissolved oxygen calibration for this cruise. Dissolved oxygen saturation at the surface suggests that the oxygen sensor might have been reading a little low. Based on a previous cruise the SBE DO data were recalibrated by multiplying by 1.04. The dissolved oxygen, transmissivity, fluorescence and turbidity data are nominal and unedited except that some records were removed in the course of editing temperature and salinity. ------------------------------------------------------------------------------- *CALIBRATION $TABLE: CORRECTED CHANNELS !Name Units Fmla Pad Coefficients !-------------------------------- --------- ---- ------ ------------ 'Oxygen:Dissolved:SBE [mL/L]' mL/L 10 -99 () (0 1.04) 'Oxygen:Dissolved:SBE [umol/kg]' umol/kg 10 -99 () (0 1.04) $END !--1--- ---2---- --3-- ---4--- --5--- ---6---- --7--- --8-- -9-- !Pressu Temperat Trans Fluores Turbid Salinity Oxygen Oxyge Numb !re ure: missi cence: ity: :T0:C0 : n: er_o ! Primary vity URU: Seapoi Dissol Disso ~bin ! Seapoin nt ved: lved: _rec ! t SBE SBE ords !------ -------- ----- ------- ------ -------- ------ ----- ---- *END OF HEADER 2.0 9.2204 73.6 0.387 4.9 31.7784 4.65 202.6 2 3.0 9.2172 74.2 0.412 4.0 31.7929 4.72 205.8 1 4.0 9.2429 74.1 0.447 3.6 31.8019 4.77 207.9 2 5.0 9.2693 74.2 0.509 3.8 31.8065 4.82 210.1 2 6.0 9.2679 74.2 0.518 3.7 31.8104 4.83 210.6 1 7.0 9.2491 74.2 0.512 3.8 31.8123 4.83 210.6 2 8.0 9.2155 74.4 0.497 3.9 31.8102 4.82 210.1 2 9.0 9.2013 74.4 0.494 3.2 31.8089 4.81 209.8 1 10.0 9.2023 74.5 0.479 3.4 31.8114 4.82 210.1 2 11.0 9.2671 74.4 0.478 3.5 31.8237 4.86 211.8 2 12.0 9.3238 74.3 0.494 4.0 31.8301 4.90 213.3 1 13.0 9.3344 74.2 0.479 3.9 31.8340 4.92 214.2 2 14.0 9.3598 74.2 0.486 3.5 31.8381 4.94 215.4 2 15.0 9.3841 74.2 0.487 3.6 31.8446 4.95 215.8 1 16.0 9.3750 74.1 0.493 3.7 31.8457 4.96 216.0 2 17.0 9.3862 74.2 0.492 3.7 31.8507 4.97 216.5 2 18.0 9.4223 74.1 0.494 3.9 31.8555 4.99 217.4 1 19.0 9.4391 74.1 0.495 4.2 31.8584 5.01 218.1 2 20.0 9.4549 74.1 0.507 4.0 31.8619 5.02 218.8 1 21.0 9.4762 74.1 0.486 3.8 31.8691 5.02 218.9 3