*2015/07/24 08:27:33.51 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2008/10/10 17:22:03.000 TIME INCREMENT : 0 0 0 1 0 ! (day hr min sec ms) NUMBER OF RECORDS : 20 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : C8C42705 NUMBER OF CHANNELS : 9 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 2 21 2 Temperature:Primary 'deg C (ITS90)' 11.3377 11.6196 3 Transmissivity %/metre 68.6 72.2 4 Fluorescence:URU:Seapoint mg/m^3 0.499 0.881 5 Turbidity:Seapoint FTU 0 4.387 6 Salinity:T0:C0 PSS-78 31.1754 31.3685 7 Oxygen:Dissolved:SBE mL/L 6.0216 6.21504 8 Oxygen:Dissolved:SBE umol/kg 262.6 271.024 9 Number_of_bin_records n/a 1 2 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 7 F ' ' 1 6 -99 ' ' 9 F ' ' 4 7 -99 ' ' 7 F ' ' 2 8 -99 ' ' 6 F ' ' 1 9 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: P:\Cruise_Data_Processing\2008-64\Pro $END *ADMINISTRATION MISSION : 2008-64 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Buoyancy Current Study SCIENTIST : Morrison J. PLATFORM : Achiever *LOCATION GEOGRAPHIC AREA : B.C.Coast STATION : 32 EVENT NUMBER : 53 LATITUDE : 52 31.07400 N ! (deg min) LONGITUDE : 128 49.95200 W ! (deg min) WATER DEPTH : 26 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 4057 $TABLE: SENSORS ! Name Abs Depth Serial No ! --------------------------------- -------------- ---------- Temperature ' ' 4057 Conductivity ' ' 4057 'Pressure:Strain Gauge' ' ' 4057 'Oxygen:SBE 43' ' ' 0052 Transmissometer:Chelsea/Seatech ' ' 163 Fluorometer:Seapoint ' ' 2805 'Turbidity Meter:Seapoint' ' ' 10133 $END $REMARKS SOFTWARE VERSION 1.24 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.4.1 2015/07/20 15:18:53 469 469 CLEAN 5.2.1 2015/07/20 15:19:07 469 469 MERGEHDR 1.3 2015/07/20 15:20:09 469 469 CLIP 1.3 2015/07/21 15:11:17 469 410 DELETE 6.3 2015/07/22 09:25:18 410 56 CTDEDIT 5.0.4 2015/07/22 16:50:10 56 30 CTDEDIT 5.0.4 2015/07/23 11:20:17 30 30 BINAVE 4.2 2015/07/23 11:26:49 30 20 REMOVECH 8.2 2015/07/23 11:48:03 20 20 CHGUNITS 3.1 2015/07/23 11:48:46 20 20 REORDER 1.3.1 2015/07/23 11:50:20 ? ? CALIB 11.8.1 2015/07/23 14:45:12 20 20 HDREDIT2 3.0.2 2015/07/24 08:27:33 ? ? $END $REMARKS -CLEAN functions: 2015/07/20 15:19:02 20 Reset #RECS, MIN & MAX values in header. Set event to last 4 characters of file name -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Scan_Number Min,Max = 60.000, 50000.000 Time Not Available in File -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 11.57 dbars Sample interval (from FILE section of header) = 1.000 seconds. -CTDEDIT v5.0.4 2015/07/22 16:50:10 26 records were deleted in this editing session. No data values were changed. -CTDEDIT v5.0.4 2015/07/23 11:20:17 6 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Bin value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2015/07/23 11:48:03 The following CHANNEL(S) were removed: Scan_Number Conductivity:Primary [S/m] Oxygen:Voltage:SBE [volts] Descent_Rate [m/s] Depth:Salt_Water [metres] Flag -CHANGE units: Temperature reference channel: Temperature Salinity reference channel: Salinity:T0:C0 'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L to umol/kg -CALIB parameters: 2015/07/23 14:45:12 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = P:\Cruise_Data_Processing\2008-64\Processing\doc\2008-64-recal1.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 7 Oxygen:Dissolved:SBE [mL/L] mL/L 10 0.0000000E+00 0.1040000E+01 8 Oxygen:Dissolved:SBE [umol/kg umol/kg 10 0.0000000E+00 0.1040000E+01 -HEADER EDITS: 2015/07/24 08:27:33 Applied edit header: P:\Cruise_Data_Processing\2008-64\Processing\doc\2008-64-ctd-hdr.txt Channel 1: Pressure [decibar] Format: F11.2 ==> F7.1 Channel 7: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 5: Turbidity:Seapoint [FTU] Format: F8.3 ==> F7.1 $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\science\My Documents\achiever\Casts\event 53.hex Software Version 1.24 Temperature SN = 4057 Conductivity SN = 4057 System UpLoad Time = Oct 10 2008 17:44:53 AchieverOct08 stn 32 SeacatPlus V 1.6 SERIAL NO. 4057 10 Oct 2008 17:44:22 vbatt = 11.3, vlith = 8.9, ioper = 62.8 ma, ipump = 76.3 ma, iext01 = 15.5 ma iext23 = 19.4 ma status = not logging number of scans to average = 4 samples = 89706, free = 351368, casts = 98 mode = profile, minimum cond freq = 2000, pump delay = 10 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 870.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = yes, Ext Volt 1 = yes, Ext Volt 2 = yes, Ext Volt 3 = yes echo commands = yes output format = converted HEX for AFM cast 98 10 Oct 2008 17:22:03 samples 89238 to 89706, avg = 4, stop = mag swit ch S> # nquan = 13 # nvalues = 469 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = xmiss: Beam Transmission, Chelsea/Seatech [%] # name 5 = flSP: Fluorescence, Seapoint # name 6 = sbeox0V: Oxygen raw, SBE 43 [V] # name 7 = seaTurbMtr: Turbidity, Seapoint [FTU] # name 8 = dz/dtM: Descent Rate [m/s] # name 9 = sal00: Salinity, Practical [PSU] # name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 0.5 # name 11 = depSM: Depth [salt water, m], lat = 50 # name 12 = flag: flag # span 0 = 1, 469 # span 1 = 0.076, 21.568 # span 2 = 6.5200, 11.6196 # span 3 = 0.015526, 3.590982 # span 4 = 8.0173, 92.4601 # span 5 = 0.0000e+00, 9.5102e-01 # span 6 = 3.1323, 3.9270 # span 7 = 0.000, 5.379 # span 8 = -0.685, 0.795 # span 9 = 0.1114, 31.4140 # span 10 = 5.1064, 8.0744 # span 11 = 0.075, 21.382 # span 12 = 0.0000e+00, 0.0000e+00 # interval = seconds: 1 # start_time = Oct 10 2008 17:22:03 [Instrument's time stamp, header] # bad_flag = -9.990e-29 # # # # # 4057 # 11-Dec-09 # 1.27353200e-003 # 2.54456499e-004 # 9.66424282e-007 # 1.15595175e-007 # 1.00000000 # 0.0000 # # # # # # 4057 # 11-Dec-09 # 1 # # 0.0000 # 2000.0000 # 0 # # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.00000000e+000 # 0.0 # -9.57000000e-008 # # # -9.80645600e-001 # 1.35752600e-001 # -3.21709900e-004 # 4.24780700e-005 # -9.57000000e-008 # 3.2500e-006 # # 0.00000000e+000 # # 1.00000000 # 0.00000 # # # # # # 4057 # 10-Dec-09 # -3.14205200e-002 # 2.66910600e-003 # -6.70134500e-012 # -6.17351500e+001 # 5.21613200e+001 # -7.45227300e-003 # 5.19351200e+005 # -4.35554100e+000 # 2.16284100e-001 # 2.49637500e+001 # -8.50000000e-004 # 0.00000000e+000 # 0.000000 # # # # # # 0052 # 8 Apr 2008 # 1 # # # 0.0000 # 0.0000e+000 # 0.0000 # 0.00e+000 # 0.0000 # 0.0 # # # # 2.9350e-001 # -0.5953 # -8.1689e-004 # 1.3186e-004 # -3.0669e-006 # 2.5826e+000 # 1.92634e-004 # -4.64803e-002 # 3.6000e-002 # 1.0300 #

-3.3000e-002

#

5.0000e+003

#

1.4500e+003

# # # # # # # 163 # 30 April 2008 # 20.2010 # -0.0280 # 0.250 # # # # # # 2805 # # # 0 # 0.000 # # # # # # 10133 # # # 0 # 1.000 # # # # datcnv_date = Jul 20 2015 15:16:05, 7.23.2 [datcnv_vars = 9] # datcnv_in = P:\Cruise_Data_Processing\2008-64\RAW\CTD\Casts\2008-64-0053.hex P :\Cruise_Data_Processing\2008-64\Processing\doc\2008-64-ctd.xmlcon # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # filter_date = Jul 20 2015 15:16:58, 7.23.2 # filter_in = P:\Cruise_Data_Processing\2008-64\Processing\convert\2008-64-0053. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 0.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = # alignctd_date = Jul 20 2015 15:17:22, 7.23.2 # alignctd_in = P:\Cruise_Data_Processing\2008-64\Processing\filter\2008-64-0053 .cnv # alignctd_adv = tv290C 0.500, sbeox0V 2.500 # Derive_date = Jul 20 2015 15:18:17, 7.23.2 [derive_vars = 3] # Derive_in = P:\Cruise_Data_Processing\2008-64\Processing\align\2008-64-0053.cn v P:\Cruise_Data_Processing\2008-64\Processing\doc\2008-64-ctd.xmlcon # derive_time_window_docdt = seconds: 0.5 # derive_ox_tau_correction = yes # file_type = ascii END* Remarks from CTDEDIT: CTDEDIT was used to remove some records from the top and bottom of the cast; salinity was cleaned lightly. Data Processing --------------- SeaCat salinity is prone to error due to a mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. Such errors are likely to be larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05 units in areas of high gradients. For these data the descent rate was very noisy for a few casts in the middle part of the cruise, but quite steady for most casts and temperature and salinity gradients were not extreme, so the error is likely much smaller than that. Salinity calibration sampling was done but no analysis results could be found at the time of processing. Post-cruise calibration results for salinity suggest that salinity calibration is well within +/- 0.002. There was no dissolved oxygen calibration for this cruise. Dissolved oxygen saturation at the surface suggests that the oxygen sensor might have been reading a little low. Based on a previous cruise the SBE DO data were recalibrated by multiplying by 1.04. The dissolved oxygen, transmissivity, fluorescence and turbidity data are nominal and unedited except that some records were removed in the course of editing temperature and salinity. ------------------------------------------------------------------------------- *CALIBRATION $TABLE: CORRECTED CHANNELS !Name Units Fmla Pad Coefficients !-------------------------------- --------- ---- ------ ------------ 'Oxygen:Dissolved:SBE [mL/L]' mL/L 10 -99 () (0 1.04) 'Oxygen:Dissolved:SBE [umol/kg]' umol/kg 10 -99 () (0 1.04) $END !--1--- ---2---- --3-- ---4--- --5--- ---6---- --7--- --8-- -9-- !Pressu Temperat Trans Fluores Turbid Salinity Oxygen Oxyge Numb !re ure: missi cence: ity: :T0:C0 : n: er_o ! Primary vity URU: Seapoi Dissol Disso ~bin ! Seapoin nt ved: lved: _rec ! t SBE SBE ords !------ -------- ----- ------- ------ -------- ------ ----- ---- *END OF HEADER 2.0 11.3377 68.6 0.499 0.0 31.1754 6.18 269.4 2 3.0 11.3646 69.2 0.585 0.1 31.1820 6.18 269.6 1 4.0 11.3650 69.3 0.690 1.8 31.1830 6.19 270.0 2 5.0 11.3794 69.4 0.791 4.2 31.1989 6.21 271.0 2 6.0 11.4908 69.3 0.881 4.4 31.2521 6.20 270.3 1 7.0 11.5569 69.9 0.850 4.2 31.3081 6.17 268.9 2 8.0 11.5779 70.5 0.843 3.9 31.3258 6.15 268.1 1 9.0 11.5919 70.7 0.824 4.0 31.3361 6.13 267.1 2 10.0 11.6129 71.2 0.748 4.0 31.3474 6.10 265.8 1 11.0 11.6180 71.4 0.728 3.8 31.3525 6.08 265.2 2 12.0 11.6196 71.5 0.717 3.8 31.3536 6.08 265.0 1 13.0 11.6173 71.6 0.714 4.0 31.3543 6.07 264.7 1 14.0 11.6090 71.7 0.691 3.8 31.3545 6.06 264.3 2 15.0 11.6076 71.8 0.683 3.8 31.3546 6.06 264.2 1 16.0 11.6082 71.8 0.686 3.8 31.3548 6.06 264.4 2 17.0 11.6082 71.9 0.675 3.8 31.3553 6.06 264.4 1 18.0 11.6074 71.9 0.688 3.8 31.3560 6.06 264.2 1 19.0 11.6023 71.9 0.679 3.8 31.3590 6.05 263.6 2 20.0 11.5947 72.1 0.643 3.7 31.3634 6.03 263.0 1 21.0 11.5870 72.2 0.676 3.7 31.3685 6.02 262.6 2