*2014/11/20 09:56:28.24 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2008/11/24 17:23:35.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 16 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 313111A5 NUMBER OF CHANNELS : 24 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 136 151 2 Pressure decibar 1.5 315.9 3 Temperature:Secondary 'deg C (ITS90)' 8.0296 9.5315 4 Transmissivity %/metre 32.2903 52.0296 5 Fluorescence:URU:Seapoint mg/m^3 0.121 0.86 6 PAR uE/m^2/sec 0 276.1 7 PAR:Reference uE/m^2/sec 393.1 1097.7 8 Oxygen:Dissolved:SBE mL/L 2.83 6.76 9 Oxygen:Dissolved:SBE umol/kg 123.2 295.7 10 Salinity:T0:C0 PSS-78 25.7473 31.2048 11 Bottle_Number n/a 1 16 12 Number_of_bin_records n/a 241 241 13 Salinity:Bottle PSS-78 31.1715 31.1715 14 Flag:Salinity:Bottle n/a 15 Chlorophyll:Extracted mg/m^3 0.72 1.12 16 Flag:Chlorophyll:Extracted n/a 17 Oxygen:Dissolved mL/L 2.788 6.588 18 Flag:Oxygen:Dissolved n/a 19 Nitrate_plus_Nitrite umol/L 23.3 29.6 20 Flag:Nitrate_plus_Nitrite n/a 21 Silicate umol/L 53.1 60.1 22 Flag:Silicate n/a 23 Phosphate umol/L 1.95 2.65 24 Flag:Phosphate n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 6 F ' ' 1 5 -99 ' ' 8 F ' ' 3 6 -99 ' ' 7 F ' ' 1 7 -99 ' ' 7 F ' ' 1 8 -99 ' ' 7 F ' ' 2 9 -99 ' ' 6 F ' ' 1 10 -99 ' ' 9 F ' ' 4 11 -99 ' ' 3 I I 0 12 ' ' ' ' 5 I I 0 13 -99 ' ' 9 F R4 4 14 ' ' ' ' 3 NQ C ' ' 15 -99 ' ' 7 F R4 2 16 ' ' ' ' 3 NQ C ' ' 17 -99 ' ' 8 F ' ' 3 18 0 ' ' 3 NQ C ' ' 19 -99 ' ' 6 F R4 1 20 ' ' ' ' 3 NQ C ' ' 21 -99 ' ' 6 F R4 1 22 ' ' ' ' 3 NQ C ' ' 23 -99 ' ' 7 F R4 2 24 ' ' ' ' 3 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- Comments from secondary file: Q:\Cruise_Data_Processing\2008-61\Processing\align\2008-61-0041.samavg3 -------------------------------------------------------------------------------------- This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-61\Pro $END *ADMINISTRATION MISSION : 2008-61 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : SoG/JdF SCIENTIST : Chandler P. PLATFORM : Vector *LOCATION GEOGRAPHIC AREA : Strait of Georgia / Juan de Fuca Strait STATION : 42 EVENT NUMBER : 41 LATITUDE : 49 1.77000 N ! (deg min) LONGITUDE : 123 26.23000 W ! (deg min) WATER DEPTH : 320 ALTIMETER (M) : 5.1 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. Comments from secondary file: Q:\Cruise_Data_Processing\2008-61\Processing\align\2008-61-0041.samavg3 ----------------------------------------------------------------------- Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2038 conductivity:primary ' ' 1729 pressure ' ' 63507 temperature:secondary ' ' 2449 conductivity:secondary ' ' 2424 altimeter: ' ' ' ' Fluorometer ' ' Seapoint irradiance:primary ' ' 4656 transmissometer:primary ' ' 1005 Oxygen:SBE ' ' 1176 surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE V 7.16 Comments from secondary file: Q:\Cruise_Data_Processing\2008-61\Processing\align\2008-61-0041.samavg3 ----------------------------------------------------------------------- SOFTWARE VERSION SEASAVE V 7.16 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.1 2009/01/07 10:12:08 3856 3856 CLEAN 5.0.2 2009/01/07 10:15:42 3856 3856 ADDSAMP 3.4 2009/01/07 10:26:47 3856 3856 BINAVE 4.1.1 2009/01/07 10:27:30 3856 16 MERGE 3.3 2009/02/13 11:25:27 16 16 CLEAN 5.0.2 2009/02/13 11:25:36 ? ? CALIB 11.7 2009/02/13 13:33:45 16 16 SORT 3.5 2009/02/13 15:00:28 16 16 REMOVECH 8.0 2009/02/13 15:02:52 16 16 CHGUNITS 3.0 2009/02/13 15:13:05 16 16 REORDER 1.2.1 2009/02/13 15:17:25 ? ? HDREDIT2 2.5.1 2009/02/13 16:44:32 ? ? SORT 3.5 2009/02/13 17:39:43 16 16 MERGE 3.3 2009/02/13 17:46:02 16 16 SORT 3.5 2009/02/13 17:46:07 16 16 SORT 3.5 2009/07/02 13:49:35 16 16 REMOVECH 8.0 2009/07/02 13:50:49 16 16 REORDER 1.2.1 2009/07/02 13:51:43 ? ? MERGE 3.3 2009/07/02 13:52:07 16 16 SORT 3.5 2009/07/02 13:54:22 16 16 HDREDIT2 2.5.1 2009/07/02 14:01:57 ? ? CALIB 11.7 2010/08/18 12:59:23 16 16 HDREDIT2 2.5.1 2010/08/18 13:09:05 ? ? HDREDIT2 2.5.1 2010/09/02 14:01:33 ? ? CHANGE_FLAGS 1.0 2013/07/16 11:49:21 16 16 HDREDIT2 2.6 2013/12/18 13:56:12 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/18 15:52:00 16 16 CHANGE_FLAGS 2.0 2014/11/20 09:56:28 16 16 $END $REMARKS -CLEAN functions: 2009/01/07 10:15:13 20 Reset #RECS, MIN & MAX values in header. Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data_Processing\2008-61\Processing\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2009/02/13 11:25:25 2009/02/13 11:25:25 2009/02/13 11:25: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Ammonium, Flag:Ammonium Primary file : Q:\Cruise_Data_Processing\2008-61\Processing\hydro\2008-61-0041.samavg Secondary file: Q:\Cruise_Data_Processing\2008-61\Processing\hydro\2008-61-0041.mrgcln1 -CLEAN functions: 2009/02/13 11:25:35 20 Remove Sea-Bird comments from the header. Remove remark heading: "Comments from secondary" -CALIB parameters: 2009/02/13 13:33:45 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-61\Processing\doc\2008-61-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Pressure dbars 10 0.2000000E+00 0.1000000E+01 15 Oxygen:Dissolved:SBE mL/L 10 -0.1110000E-01 0.1139000E+01 -SORT parameters: 2009/02/13 15:00:28 Sorted in ascending order of channel Press* -REMOVECH 2009/02/13 15:02:52 10 channels removed. -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2009/02/13 16:44:32 Applied edit header: Q:\Cruise_Data_Processing\2008-61\Processing\doc\2008-61-bot-hdr.txt Channel 2: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 5: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 7: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 6: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 12: Salinity:Bottle [PSS-78] Units: ==> PSS-78 Channel 14: Chlorophyll:Extracted [mg/m^3] Units: ==> mg/m^3 -SORT parameters: 2009/02/13 17:39:43 Sorted in ascending order of channel Sample_Number -The following MERGE parameters were used: 2009/02/13 17:46:01 2009/02/13 17:46:01 2009/02/13 17:46: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: PAR:Reference Primary file : Q:\Cruise_Data_Processing\2008-61\Processing\align\2008-61-0041.che3 Secondary file: Q:\Cruise_Data_Processing\2008-61\Processing\align\2008-61-0041.samavg3 Comments from secondary file: Q:\Cruise_Data_Processing\2008-61\Processing\align\2008-61-0041.samavg3 ----------------------------------------------------------------------- -CLEAN functions: 2009/02/13 17:33:42 20 Reset #RECS, MIN & MAX values in header. Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data_Processing\2008-61\Processing\align\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -HEADER EDITS: 2009/02/13 17:45:41 Channel 2: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 8: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 13: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 14: PAR:Reference [uE/m^2/sec] Format: F11.3 ==> F7.1 -SORT parameters: 2009/02/13 17:46:07 Sorted in ascending order of channel Pressure -SORT parameters: 2009/07/02 13:49:35 Sorted in ascending order of channel Sample_Number -REMOVECH 2009/07/02 13:50:49 6 channels removed. -The following MERGE parameters were used: 2009/07/02 13:52:06 2009/07/02 13:52:06 2009/07/02 13:52: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Nitrate_plus_Nitrite [ ], Flag:Nitrate_plus_Nitrite [ ], Silicate [ ], Flag:Silicate [ ], Phosphate [ ], Flag:Phosphate [ ] Primary file : Q:\Cruise_Data_Processing\2008-61\bottle\2008-61-0041.reo Secondary file: Q:\Cruise_Data_Processing\2008-61\bottle\2008-61-0041.nut -SORT parameters: 2009/07/02 13:54:22 Sorted in ascending order of channel Pressure -HEADER EDITS: 2009/07/02 14:01:57 Applied edit header: Q:\Cruise_Data_Processing\2008-61\2008-61-bot-hdr2.txt Channel 14: Flag:Salinity:Bottle [n/a] Units: ==> n/a Channel 16: Flag:Chlorophyll:Extracted [n/a] Units: ==> n/a Channel 20: Flag:Nitrate_plus_Nitrite [n/a] Units: ==> n/a Channel 22: Flag:Silicate [n/a] Units: ==> n/a Channel 24: Flag:Phosphate [n/a] Units: ==> n/a -CALIB parameters: 2010/08/18 12:59:23 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\Trans Cor\2008-61\DOC\2008-61-recal-tr.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 4 Transmissivity %/metre 10 0.0000000E+00 0.1141000E+01 -HEADER EDITS: 2010/08/18 13:09:05 Applied edit header: Q:\Cruise_Data_Processing\Trans Cor\2008-61\DOC\Trans_Correction1.TXT Channel 10: Salinity:T0:C0 [PSS-78] Name: Salinity:T1:C1 ==> Salinity:T0:C0 Channel 14: Flag:Salinity:Bottle [n/a] Pad: 0 ==> blank Channel 16: Flag:Chlorophyll:Extracted [n/a] Pad: 0 ==> blank Channel 20: Flag:Nitrate_plus_Nitrite [n/a] Pad: 0 ==> blank Channel 22: Flag:Silicate [n/a] Pad: 0 ==> blank Channel 24: Flag:Phosphate [n/a] Pad: 0 ==> blank -HEADER EDITS: 2010/09/02 14:01:33 Channel 4: Transmissivity [%/metre] Format: F7.2 ==> F6.1 -HEADER EDITS: 2013/12/18 13:56:12 Channel 19: Nitrate_plus_Nitrite [umol/L] Units: ==> umol/L Channel 21: Silicate [umol/L] Units: ==> umol/L Channel 23: Phosphate [umol/L] Units: ==> umol/L $END *COMMENTS Analysis methods: ----------------- Chlorophyll samples are collected in duplicate in calibrated polycarbonate bottles (~330ml), then filtered onto 25mm MFS GF/75 filters at <70mmHg vacuum. The filters are placed in glass scintillation vials and immediately frozen at -20ºC until analysis. The chlorophyll is extracted in 10 ml of 90% acetone for 24h at -20ºC, then brought to room temperature and the extract is decanted and measured using a Turner Designs 10-AU-005-CE fluorometer, which has been calibrated with solutions made from commercially prepared pure chlorophyll a. Fluorometer readings are taken before and after acidification of the extract with two drops of 1.5N HCl. Average of two samples is reported. Variability is assessed as the % (std dev/mean*100) and samples are flagged if >10%. Oxygen samples are analyzed on an automated Winkler titration system following the procedures of Carpenter (1965). Samples were analyzed at sea using an automated titration system consisting of a Brinkman Dosimat (model 665) and a PC 900 Colorimeter. Salinity samples were collected in glass bottles and analyzed on a Guildline model 8400B Autosal at IOS. Salinometers are standardized with IAPSO standard seawater. Nutrient samples were collected in plastic tubes and stored frozen and later analysed at IOS using an Astoria analyzer following methods described in Barwell-Clarke and Whitney (1996). There were no nutrient duplicates. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. J. Barwell-Clarke and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. Comments from secondary file: Q:\Cruise_Data_Processing\2008-61\Processing\align\2008-61-0041.samavg3 ----------------------------------------------------------------------- SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-61\2008-61-0041.hex Software Version Seasave V 7.16 Temperature SN = 2038 Conductivity SN = 1729 Number of Bytes Per Scan = 40 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Nov 24 2008 13:46:58 NMEA Latitude = 49 01.77 N NMEA Longitude = 123 26.23 W NMEA UTC (Time) = Nov 24 2008 17:23:35 Store Lat/Lon Data = Append to Every Scan Ship: Vector Cruise: 2008-61 Station: 42 Latitude: Longitude: Depth (m): 320 # nquan = 16 # nvalues = 3856 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = dz/dtM: Descent Rate [m/s] # name 10 = pumps: Pump Status # name 11 = altM: Altimeter [m] # name 12 = par: PAR/Irradiance, Biospherical/Licor # name 13 = spar: SPAR/Surface Irradiance # name 14 = nbf: number of bottles fired # name 15 = flag: 0.000e+00 # interval = seconds: 0.0416667 # start_time = Nov 24 2008 13:46:58 # sensor 0 = Frequency 0 temperature, primary, 2038, 06 May 08 # sensor 1 = Frequency 1 conductivity, primary, 1729, 13 Jun 08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 2449, 06 May 08 # sensor 4 = Frequency 4 conductivity, secondary, 2424, 07 May 08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 altimeter # sensor 6 = Extrnl Volt 2 Fluorometer, Seapoint, primary # sensor 7 = Extrnl Volt 4 irradiance (PAR), primary, 4656, 11-Feb-03 # sensor 8 = Extrnl Volt 6 transmissometer, primary, 1005, 5 Mar 08 # sensor 9 = Extrnl Volt 7 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 10 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Feb 13 2009 17:26:43, 7.18 # datcnv_in = Q:\Cruise_Data_Processing\2008-61\RAW\CTD\2008-61-0041.hex Q:\Crui se_Data_Processing\2008-61\Processing\doc\2008-61-ctd.con # datcnv_bottle_scan_range_source = scans marked with bottle confirm bit, -5, 10 END* ************************************************************************************ Nitrates were recalculated in June 2009 to correct for too short a cadmium column resulting in incomplete colour development. All results coded "c" for this reason. ************************************************************************************ ********************************************************************************* Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by a correction factor, which was based on assumptions that deep offshore transmissivity from a June 2009 cruise should be about 62%/m and that drift was linear with time between March 2008 and July 2009. The corrections produced reasonable results for all cruises in that time period. For details on how the correction factor was derived see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should be considered estimates. ********************************************************************************* *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0.2 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.111E-01 1.139) Transmissivity %/metre 10 -99 () (0 1.141) $END !-1-- --2--- ---3---- --4-- ---5--- --6--- --7--- --8--- --9-- ---10--- 11 -12- ---13--- 14 --15-- 16 ---17-- 18 --19- 20 --21- 22 --23-- 24 !Samp Pressu Temperat Trans Fluores PAR PAR: Oxygen Oxyge Salinity Bo Numb Salinity Fl Chloro Fl Oxygen: Fl Nitra Fl Silic Fl Phosph Fl !le_ re ure: missi cence: Refere : n: :T0:C0 tt er_o :Bottle ag phyll: ag Dissolv ag te_ ag ate ag ate ag !Numb Secondar vity URU: nce Dissol Disso ~u ~bin ~o Extrac ~a ed ~o plus_ ~t ~i ~p !er y Seapoin ved: lved: mb _rec tt ted ct lv Nitri ri ca ha ! t SBE SBE er ords le ed ed te te te te !---- ------ -------- ----- ------- ------ ------ ------ ----- -------- -- ---- -------- -- ------ -- ------- -- ----- -- ----- -- ------ -- *END OF HEADER 151 1.5 8.0296 36.6 0.860 276.1 953.5 6.76 295.7 25.7473 16 241 -99.0000 0 1.12 0 6.588 0 23.3 3 55.0 0 1.95 0 150 5.4 9.1838 44.4 0.714 55.0 886.7 5.56 243.1 27.5354 15 241 -99.0000 0 0.72 0 5.873 0 25.3 3 54.5 0 1.95 0 149 10.3 9.4299 46.7 0.445 15.5 960.7 4.74 207.2 28.6919 14 241 -99.0000 0 -99.00 0 4.620 0 27.0 3 53.1 0 2.28 0 148 20.4 9.4488 48.4 0.228 2.4 968.9 4.01 175.0 29.6902 13 241 -99.0000 0 -99.00 0 3.991 0 28.6 3 54.4 0 2.28 0 147 30.5 9.3862 47.6 0.203 0.5 455.2 3.90 170.1 29.9806 12 241 -99.0000 0 -99.00 0 3.844 0 29.1 3 54.8 0 2.44 0 146 40.3 9.3967 50.4 0.167 0.1 891.8 3.57 155.9 30.1628 11 241 -99.0000 0 -99.00 0 3.585 0 29.1 3 54.5 0 2.46 0 145 50.9 9.4586 50.5 0.150 0.0 1031.7 3.55 154.7 30.3453 10 241 -99.0000 0 -99.00 0 3.460 0 29.1 3 53.1 0 2.37 0 144 75.0 9.5315 52.0 0.129 0.0 956.9 3.20 139.4 30.5200 9 241 -99.0000 0 -99.00 0 3.287 0 29.0 63 53.1 6 2.27 6 143 100.2 9.3744 45.6 0.151 0.0 393.1 3.65 159.0 30.6381 8 241 -99.0000 0 -99.00 0 3.738 0 29.1 3 53.5 0 2.44 0 142 125.2 9.3488 41.2 0.154 0.0 409.6 3.42 149.0 30.7769 7 241 -99.0000 0 -99.00 0 3.386 0 29.2 3 54.4 0 2.47 0 141 150.2 9.3988 47.3 0.124 0.0 406.5 2.97 129.7 30.9046 6 241 -99.0000 0 -99.00 0 2.948 0 29.0 3 54.7 0 2.46 0 140 175.2 9.3308 47.2 0.121 0.0 582.7 2.95 128.5 30.9993 5 241 -99.0000 0 -99.00 0 2.917 0 28.5 3 55.1 0 2.48 0 139 200.1 9.2695 46.4 0.121 0.0 399.0 2.93 127.9 31.0700 4 241 -99.0000 0 -99.00 0 2.956 0 29.3 3 57.0 0 2.40 0 138 249.9 9.2004 45.9 0.122 0.0 497.2 2.89 126.2 31.1694 3 241 31.1715 0 -99.00 0 2.850 0 29.2 3 57.3 0 2.53 0 137 300.4 9.1883 33.5 0.127 0.0 478.9 2.83 123.2 31.2048 2 241 -99.0000 0 -99.00 0 2.915 0 28.8 3 58.1 0 2.60 0 136 315.9 9.1910 32.3 0.127 0.0 1097.7 2.83 123.4 31.2046 1 241 -99.0000 0 -99.00 0 2.788 0 29.6 3 60.1 0 2.65 0