*2010/09/02 13:58:24.70 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/09/20 02:59:07.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 110 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : CBD897AB NUMBER OF CHANNELS : 8 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 2.4 110.7 2 Temperature:Primary 'deg C (ITS90)' 8.0259 15.742 3 Transmissivity %/metre 30.0832 54.747 4 Fluorescence:URU:Seapoint mg/m^3 0.14 2.106 5 Oxygen:Dissolved:SBE mL/L 0.32 8.31 6 Oxygen:Dissolved:SBE umol/kg 13.8 362.9 7 Salinity:T0:C0 PSS-78 29.8636 32.6047 8 Number_of_bin_records n/a 6 27 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 7 F ' ' 2 6 -99 ' ' 6 F ' ' 1 7 -99 ' ' 9 F ' ' 4 8 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-50\Pro Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0044.del2 ------------------------------------------------------------------ This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-50\Pro $END *ADMINISTRATION MISSION : 2008-50 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : LaPerouse SCIENTIST : Juhasz T. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : WCVI STATION : EF03 EVENT NUMBER : 44 LATITUDE : 49 4.26000 N ! (deg min) LONGITUDE : 125 9.38000 W ! (deg min) WATER DEPTH : 120 ALTIMETER (M) : 5.98 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0044.del2 ------------------------------------------------------------------ Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 4054 conductivity:primary ' ' 1766 pressure ' ' 63507 temperature:secondary ' ' 4700 conductivity:secondary ' ' 2173 Fluorometer ' ' Seapoint transmissometer:primary ' ' 1005DR Oxygen:SBE ' ' 1176 altimeter: ' ' ' ' irradiance:primary ' ' 4656 $END $REMARKS SOFTWARE VERSION SEASAVE V 7.16 Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0044.del2 ------------------------------------------------------------------ SOFTWARE VERSION SEASAVE V 7.16 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2009/03/11 22:26:58 18165 18165 CLEAN 5.0.2 2009/03/11 22:37:32 17941 17941 SHIFTDAT 3.4 2009/03/11 22:47:20 17941 17941 SHIFTDAT 3.4 2009/03/11 22:56:52 17941 17941 SHIFTDAT 3.4 2009/03/11 23:06:28 17941 17941 SHIFTDAT 3.4 2009/03/11 23:16:04 17941 17941 DELETE 6.3 2009/03/11 23:22:56 17941 2275 CTDEDIT 4.61 2009/03/14 17:20:24 2275 2148 MERGE 3.3 2009/03/16 17:21:24 2148 2148 CALIB 11.7 2009/03/16 17:24:17 2148 2148 CALIB 11.7 2009/03/16 21:24:08 2148 2148 FILTERS 4.3 2009/03/16 21:29:20 2148 2148 BINAVE 4.1.1 2009/03/16 21:30:36 2148 110 REMOVECH 8.0 2009/03/16 21:30:54 110 110 CHGUNITS 3.0 2009/03/17 08:54:19 110 110 REORDER 1.2.1 2009/03/17 09:29:32 ? ? HDREDIT2 2.5.1 2009/03/17 09:32:27 ? ? CALIB 11.7 2010/08/18 11:47:52 110 110 HDREDIT2 2.5.1 2010/08/18 12:12:32 ? ? HDREDIT2 2.5.1 2010/09/02 13:58:24 ? ? $END $REMARKS -CLEAN functions: 2009/03/11 22:29:22 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.30 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 50.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 101.06 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CTDEDIT 2009/03/14 17:20:24 127 records were deleted in this editing session. 9 changes in channel Salinity:T0:C0 -The following MERGE parameters were used: 2009/03/16 17:17:02 2009/03/16 17:17:05 2009/03/16 17:17: Merge Channel: Scan_Number [n/a] Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, Scan_Number Secondary Channels to Include: Temperature:Primary [deg C (ITS90)], Temperature:Secondary [deg C (ITS90)], Conductivity:Primary [S/m], Conductivity:Secondary [S/m], Transmissivity [%/metre], Fluorescence:Seapoint [mg/m^3], Oxygen:Voltage:SBE [volts], Altimeter [metres], Descent_Rate [m/s], Status:Pump [n/a], PAR [uE/m^2/sec], Oxygen:Dissolved:SBE [mL/L], Salinity:T0:C0 [PSS-78], Salinity:T1:C1 [PSS-78], Flag [n/a] Primary file : Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0044.edt Secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0044.del2 Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0044.del2 ------------------------------------------------------------------ -CLEAN functions: 2009/03/16 16:07:28 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.30 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 50.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 101.06 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CALIB parameters: 2009/03/16 17:24:17 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.2000000E+00 0.1000000E+01 14 Oxygen:Dissolved:SBE mL/L 10 -0.2500000E-01 0.1082600E+01 -CALIB parameters: 2009/03/16 21:24:08 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 14 Oxygen:Dissolved:SBE mL/L 10 0.1460000E+00 0.9148000E+00 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2009/03/16 21:30:54 11 channels removed. -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2009/03/17 09:32:27 Applied edit header: Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-HDR.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 4: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 5: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 -CALIB parameters: 2010/08/18 11:47:52 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\Trans Cor\2008-50-recal-tr.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Transmissivity %/metre 10 0.0000000E+00 0.1106000E+01 -HEADER EDITS: 2010/08/18 12:12:32 Applied edit header: Q:\Cruise_Data_Processing\Trans Cor\Trans_Correction1.TXT -HEADER EDITS: 2010/09/02 13:58:24 Channel 3: Transmissivity [%/metre] Format: F7.2 ==> F6.1 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-50\2008-50-0044.hex Software Version Seasave V 7.16 Temperature SN = 4054 Conductivity SN = 1766 Number of Bytes Per Scan = 37 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Sep 20 2008 03:00:30 NMEA Latitude = 49 04.26 N NMEA Longitude = 125 09.38 W NMEA UTC (Time) = Sep 20 2008 02:59:07 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2008-10 2008-50 Station: EF03 Latitude: Longitude: Depth (m): 120 # nquan = 16 # nvalues = 18165 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = altM: Altimeter [m] # name 10 = dz/dtM: Descent Rate [m/s] # name 11 = pumps: Pump Status # name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 13 = sal00: Salinity [PSU] # name 14 = sal11: Salinity, 2 [PSU] # name 15 = flag: flag # span 0 = 1, 18165 # span 1 = 1.099, 111.057 # span 2 = 8.0251, 16.8077 # span 3 = 8.0252, 16.1896 # span 4 = 3.399987, 3.818275 # span 5 = 3.400361, 3.823376 # span 6 = 63.7892, 83.9866 # span 7 = 1.3187e-01, 5.1685e+00 # span 8 = 0.5580, 4.3443 # span 9 = 0.00, 100.00 # span 10 = -1.038, 1.272 # span 11 = 0, 1 # span 12 = 0.20832, 9.87359 # span 13 = 27.9913, 32.6053 # span 14 = 29.3648, 32.6096 # span 15 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Sep 20 2008 03:00:30 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 4054, 16-Jan-08 # sensor 1 = Frequency 1 conductivity, primary, 1766, 07-May-08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 4700, 16-Jan-08 # sensor 4 = Frequency 4 conductivity, secondary, 2173, 07-May-08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005DR, 5-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4656, 11-Feb-03 # datcnv_date = Mar 11 2009 18:18:11, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2008-50\RAW\CTD\2008-50-0044.hex Q:\Crui se_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # wildedit_date = Mar 11 2009 21:57:41, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2008-50\Processing\convert\2008-50-004 4.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Mar 11 2009 22:01:09, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2008-50\Processing\wildedit\2008-50-0044 .cnv # celltm_alpha = 0.0245, 0.0300 # celltm_tau = 9.5000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Mar 11 2009 22:05:10, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2008-50\Processing\celltm\2008-50-0044.c nv Q:\Cruise_Data_Processing\2009-03\Processing\doc\2009-03-ctd1.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* CTDEDIT was used to remove surface records to 2.1db and records corrupted by shed wakes from the bottom of the cast; salinity was cleaned lightly. Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0044.del2 ------------------------------------------------------------------ SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-50\2008-50-0044.hex Software Version Seasave V 7.16 Temperature SN = 4054 Conductivity SN = 1766 Number of Bytes Per Scan = 37 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Sep 20 2008 03:00:30 NMEA Latitude = 49 04.26 N NMEA Longitude = 125 09.38 W NMEA UTC (Time) = Sep 20 2008 02:59:07 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2008-10 2008-50 Station: EF03 Latitude: Longitude: Depth (m): 120 # nquan = 17 # nvalues = 18165 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = altM: Altimeter [m] # name 10 = dz/dtM: Descent Rate [m/s] # name 11 = pumps: Pump Status # name 12 = par: PAR/Irradiance, Biospherical/Licor # name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 14 = sal00: Salinity [PSU] # name 15 = sal11: Salinity, 2 [PSU] # name 16 = flag: flag # span 0 = 1, 18165 # span 1 = 1.099, 111.057 # span 2 = 8.0251, 16.8077 # span 3 = 8.0252, 16.1896 # span 4 = 3.399987, 3.818275 # span 5 = 3.400361, 3.823376 # span 6 = 63.7892, 83.9866 # span 7 = 1.3187e-01, 5.1685e+00 # span 8 = 0.5580, 4.3443 # span 9 = 0.00, 100.00 # span 10 = -1.038, 1.272 # span 11 = 0, 1 # span 12 = 3.5500e-01, 3.5500e-01 # span 13 = 0.11056, 8.47494 # span 14 = 27.9913, 32.6053 # span 15 = 29.3648, 32.6096 # span 16 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Sep 20 2008 03:00:30 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 4054, 16-Jan-08 # sensor 1 = Frequency 1 conductivity, primary, 1766, 07-May-08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 4700, 16-Jan-08 # sensor 4 = Frequency 4 conductivity, secondary, 2173, 07-May-08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005DR, 5-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4656, 11-Feb-03 # datcnv_date = Mar 16 2009 15:37:35, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2008-50\RAW\CTD\2008-50-0044.hex Q:\Crui se_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # wildedit_date = Mar 16 2009 15:40:18, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2008-50\Processing\convert\2008-50-004 4.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Mar 16 2009 15:43:45, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2008-50\Processing\wildedit\2008-50-0044 .cnv # celltm_alpha = 0.0245, 0.0300 # celltm_tau = 9.5000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Mar 16 2009 15:46:50, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2008-50\Processing\celltm\2008-50-0044.c nv Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* --------------------------------------------------------------------- Transmissivity and fluorescence are nominal and unedited except that some records were removed in editing temperature and salinity. The dissolved oxygen data in the CTD files should be considered: • ±1 ml/l from 0 – 75db • ±0.4 ml/l from 75 – 200db • ±0.2 ml/l below 200db ********************************************************************************* Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by a correction factor, which was based on assumptions that deep offshore transmissivity from a June 2009 cruise should be about 62%/m and that drift was linear with time between March 2008 and July 2009. The corrections produced reasonable results for all cruises in that time period. For details on how the correction factor was derived see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should be considered estimates. ********************************************************************************* *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0.2 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.25E-01 1.0826) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.146 0.9148) Transmissivity %/metre 10 -99 () (0 1.106) $END !--1--- ---2---- --3-- ---4--- --5--- --6-- ---7---- -8-- !Pressu Temperat Trans Fluores Oxygen Oxyge Salinity Numb !re ure: missi cence: : n: :T0:C0 er_o ! Primary vity URU: Dissol Disso ~bin ! Seapoin ved: lved: _rec ! t SBE SBE ords !------ -------- ----- ------- ------ ----- -------- ---- *END OF HEADER 2.4 15.7420 30.1 2.106 8.31 362.9 29.8636 6 3.0 15.5038 31.7 1.967 8.09 353.5 30.0464 22 4.0 14.6246 37.2 1.685 7.86 343.2 30.5237 20 5.0 14.0243 40.8 1.408 7.69 335.4 30.8103 22 6.0 13.9609 42.6 1.194 7.45 325.3 30.8025 20 7.0 13.2017 45.8 0.868 7.26 316.6 31.0735 21 8.0 13.0381 47.5 0.725 7.13 311.1 31.1179 20 9.0 12.8615 49.2 0.620 7.01 305.6 31.1653 21 10.0 12.6997 49.5 0.577 6.87 299.8 31.2289 20 11.0 12.5829 51.2 0.508 6.75 294.5 31.2368 21 12.0 12.4826 50.9 0.450 6.65 290.0 31.2732 20 13.0 12.4197 51.1 0.407 6.55 285.7 31.3183 21 14.0 12.3287 51.9 0.380 6.50 283.4 31.3295 20 15.0 12.3174 52.2 0.356 6.47 281.9 31.3607 20 16.0 12.3030 52.4 0.334 6.40 279.2 31.3870 21 17.0 12.1772 52.3 0.321 6.29 274.2 31.4084 20 18.0 12.1134 52.3 0.351 6.18 269.5 31.4342 21 19.0 12.0574 52.4 0.317 6.09 265.4 31.4505 20 20.0 11.9690 52.0 0.309 6.01 261.8 31.4763 20 21.0 11.9441 52.3 0.339 5.92 258.1 31.4892 20 22.0 11.8587 52.5 0.292 5.78 252.1 31.5267 19 23.0 11.6875 52.7 0.290 5.61 244.5 31.5694 20 24.0 11.5977 53.0 0.292 5.47 238.3 31.5863 20 25.0 11.5299 53.1 0.283 5.37 234.1 31.5993 19 26.0 11.4696 53.1 0.284 5.30 231.3 31.6219 20 27.0 11.4198 53.2 0.276 5.25 228.8 31.6405 20 28.0 11.3409 53.3 0.272 5.17 225.2 31.6578 19 29.0 11.1889 53.6 0.270 5.06 220.6 31.6877 20 30.0 11.0982 53.8 0.272 4.98 217.0 31.7052 20 31.0 10.9680 53.8 0.327 4.92 214.4 31.7298 19 32.0 10.8651 54.2 0.280 4.88 212.7 31.7497 20 33.0 10.8117 54.4 0.263 4.87 212.1 31.7598 20 34.0 10.7369 54.5 0.254 4.88 212.6 31.7758 19 35.0 10.6480 54.6 0.244 4.92 214.3 31.7923 20 36.0 10.5611 54.6 0.273 4.94 215.1 31.8130 20 37.0 10.4113 54.5 0.247 4.82 210.2 31.8411 19 38.0 10.2244 54.8 0.215 4.61 201.1 31.8723 20 39.0 10.0835 54.8 0.212 4.38 190.9 31.9032 19 40.0 9.9165 54.8 0.209 4.03 175.6 31.9379 19 41.0 9.7462 54.0 0.207 3.58 156.1 31.9693 19 42.0 9.5068 54.0 0.201 3.13 136.3 32.0208 19 43.0 9.3351 53.6 0.195 2.76 120.1 32.0670 19 44.0 9.2308 53.5 0.194 2.49 108.7 32.1074 19 45.0 9.1017 52.9 0.191 2.25 98.1 32.1753 19 46.0 8.8824 52.2 0.182 1.97 85.8 32.2286 19 47.0 8.7642 51.7 0.186 1.82 79.1 32.2646 19 48.0 8.7139 51.2 0.180 1.78 77.3 32.3035 18 49.0 8.6223 50.9 0.170 1.78 77.6 32.3521 18 50.0 8.6013 50.7 0.167 1.78 77.4 32.3879 19 51.0 8.5293 50.2 0.172 1.64 71.5 32.4155 19 52.0 8.4095 49.7 0.170 1.33 57.9 32.4494 19 53.0 8.2556 48.7 0.166 0.95 41.4 32.5014 19 54.0 8.1537 48.0 0.163 0.67 29.3 32.5338 20 55.0 8.1160 48.1 0.161 0.57 24.7 32.5489 19 56.0 8.0977 48.3 0.158 0.55 24.1 32.5550 19 57.0 8.0849 48.7 0.159 0.58 25.2 32.5590 19 58.0 8.0657 48.8 0.154 0.62 27.2 32.5642 19 59.0 8.0555 48.9 0.154 0.69 29.9 32.5676 20 60.0 8.0433 49.3 0.153 0.75 32.7 32.5707 19 61.0 8.0388 49.5 0.153 0.79 34.4 32.5725 19 62.0 8.0333 49.8 0.151 0.82 35.7 32.5749 19 63.0 8.0300 49.9 0.150 0.83 36.1 32.5764 19 64.0 8.0305 50.0 0.152 0.79 34.5 32.5790 19 65.0 8.0301 49.3 0.151 0.76 33.0 32.5810 20 66.0 8.0279 49.1 0.149 0.76 33.0 32.5827 19 67.0 8.0270 48.8 0.147 0.77 33.5 32.5839 20 68.0 8.0265 48.7 0.145 0.77 33.5 32.5852 19 69.0 8.0261 48.5 0.144 0.74 32.3 32.5866 20 70.0 8.0259 48.4 0.148 0.69 30.1 32.5890 19 71.0 8.0270 48.1 0.145 0.63 27.6 32.5903 16 72.0 8.0273 47.8 0.148 0.59 25.8 32.5912 20 73.0 8.0274 47.6 0.146 0.56 24.5 32.5921 19 74.0 8.0275 47.2 0.147 0.54 23.6 32.5929 20 75.0 8.0276 46.9 0.186 0.53 22.9 32.5935 19 76.0 8.0272 46.8 0.189 0.51 22.4 32.5948 20 77.0 8.0269 46.8 0.160 0.51 22.2 32.5953 19 78.0 8.0264 46.7 0.153 0.51 22.2 32.5957 20 79.0 8.0263 46.8 0.151 0.51 22.1 32.5962 19 80.0 8.0266 46.9 0.150 0.50 21.7 32.5966 19 81.0 8.0265 46.8 0.150 0.49 21.4 32.5969 20 82.0 8.0267 46.7 0.148 0.48 21.1 32.5972 19 83.0 8.0267 46.7 0.147 0.48 20.8 32.5974 20 84.0 8.0265 46.6 0.147 0.47 20.5 32.5976 19 85.0 8.0263 46.3 0.151 0.47 20.2 32.5984 20 86.0 8.0264 46.2 0.147 0.46 19.9 32.5987 19 87.0 8.0263 46.3 0.144 0.45 19.8 32.5989 19 88.0 8.0266 46.3 0.148 0.45 19.5 32.5993 20 89.0 8.0270 46.0 0.151 0.44 18.9 32.5994 19 90.0 8.0274 45.9 0.142 0.42 18.5 32.5997 20 91.0 8.0274 45.7 0.146 0.42 18.4 32.6000 20 92.0 8.0270 45.7 0.147 0.42 18.5 32.6003 19 93.0 8.0268 45.7 0.141 0.43 18.5 32.6002 20 94.0 8.0265 45.7 0.142 0.43 18.5 32.6006 19 95.0 8.0265 45.9 0.147 0.43 18.6 32.6007 20 96.0 8.0266 45.7 0.143 0.43 18.5 32.6007 19 97.0 8.0265 45.9 0.140 0.42 18.3 32.6008 20 98.0 8.0263 46.1 0.141 0.42 18.3 32.6012 20 99.0 8.0265 46.1 0.143 0.41 17.9 32.6017 19 100.0 8.0279 45.5 0.145 0.38 16.6 32.6026 20 101.0 8.0297 44.9 0.144 0.36 15.6 32.6034 19 102.0 8.0296 44.6 0.145 0.35 15.2 32.6037 20 103.0 8.0294 44.6 0.146 0.34 15.0 32.6037 20 104.0 8.0296 44.1 0.148 0.34 14.9 32.6041 19 105.0 8.0302 44.2 0.146 0.34 14.6 32.6042 20 106.0 8.0306 44.1 0.148 0.33 14.5 32.6044 19 107.0 8.0311 43.9 0.147 0.33 14.4 32.6045 20 108.0 8.0317 43.7 0.149 0.33 14.3 32.6046 22 109.0 8.0327 42.1 0.148 0.32 14.1 32.6047 23 110.0 8.0339 40.8 0.150 0.32 13.8 32.6047 27 110.7 8.0350 40.6 0.150 0.32 13.8 32.6046 15