*2010/09/02 13:58:24.59 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/09/20 01:52:28.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 24 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 8E49392B NUMBER OF CHANNELS : 8 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 2.3 25 2 Temperature:Primary 'deg C (ITS90)' 11.7941 16.8475 3 Transmissivity %/metre 2.765 48.111 4 Fluorescence:URU:Seapoint mg/m^3 0.599 10.94 5 Oxygen:Dissolved:SBE mL/L 6.26 7.77 6 Oxygen:Dissolved:SBE umol/kg 272.8 339.6 7 Salinity:T0:C0 PSS-78 21.8889 31.6675 8 Number_of_bin_records n/a 10 38 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 7 F ' ' 2 6 -99 ' ' 6 F ' ' 1 7 -99 ' ' 9 F ' ' 4 8 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-50\Pro Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0042.del2 ------------------------------------------------------------------ This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-50\Pro $END *ADMINISTRATION MISSION : 2008-50 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : LaPerouse SCIENTIST : Juhasz T. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : WCVI STATION : EF01 EVENT NUMBER : 42 LATITUDE : 49 5.55000 N ! (deg min) LONGITUDE : 125 11.65000 W ! (deg min) WATER DEPTH : 34 ALTIMETER (M) : 8.38 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0042.del2 ------------------------------------------------------------------ Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 4054 conductivity:primary ' ' 1766 pressure ' ' 63507 temperature:secondary ' ' 4700 conductivity:secondary ' ' 2173 Fluorometer ' ' Seapoint transmissometer:primary ' ' 1005DR Oxygen:SBE ' ' 1176 altimeter: ' ' ' ' irradiance:primary ' ' 4656 $END $REMARKS SOFTWARE VERSION SEASAVE V 7.16 Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0042.del2 ------------------------------------------------------------------ SOFTWARE VERSION SEASAVE V 7.16 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2009/03/11 22:26:45 6465 6465 CLEAN 5.0.2 2009/03/11 22:37:15 6401 6401 SHIFTDAT 3.4 2009/03/11 22:47:09 6401 6401 SHIFTDAT 3.4 2009/03/11 22:56:40 6401 6401 SHIFTDAT 3.4 2009/03/11 23:06:16 6401 6401 SHIFTDAT 3.4 2009/03/11 23:15:52 6401 6401 DELETE 6.3 2009/03/11 23:22:46 6401 604 CTDEDIT 4.61 2009/03/14 17:14:55 604 484 MERGE 3.3 2009/03/16 17:21:18 484 484 CALIB 11.7 2009/03/16 17:24:15 484 484 CALIB 11.7 2009/03/16 21:24:06 484 484 FILTERS 4.3 2009/03/16 21:29:19 484 484 BINAVE 4.1.1 2009/03/16 21:30:35 484 24 REMOVECH 8.0 2009/03/16 21:30:54 24 24 CHGUNITS 3.0 2009/03/17 08:54:19 24 24 REORDER 1.2.1 2009/03/17 09:29:32 ? ? HDREDIT2 2.5.1 2009/03/17 09:32:24 ? ? CALIB 11.7 2010/08/18 11:47:52 24 24 HDREDIT2 2.5.1 2010/08/18 12:12:32 ? ? HDREDIT2 2.5.1 2010/09/02 13:58:24 ? ? $END $REMARKS -CLEAN functions: 2009/03/11 22:29:22 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.30 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 50.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 15.38 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CTDEDIT 2009/03/14 17:14:55 120 records were deleted in this editing session. No data values were changed. -The following MERGE parameters were used: 2009/03/16 17:17:02 2009/03/16 17:17:05 2009/03/16 17:17: Merge Channel: Scan_Number [n/a] Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, Scan_Number Secondary Channels to Include: Temperature:Primary [deg C (ITS90)], Temperature:Secondary [deg C (ITS90)], Conductivity:Primary [S/m], Conductivity:Secondary [S/m], Transmissivity [%/metre], Fluorescence:Seapoint [mg/m^3], Oxygen:Voltage:SBE [volts], Altimeter [metres], Descent_Rate [m/s], Status:Pump [n/a], PAR [uE/m^2/sec], Oxygen:Dissolved:SBE [mL/L], Salinity:T0:C0 [PSS-78], Salinity:T1:C1 [PSS-78], Flag [n/a] Primary file : Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0042.edt Secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0042.del2 Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0042.del2 ------------------------------------------------------------------ -CLEAN functions: 2009/03/16 16:07:28 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.30 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 50.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 15.38 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CALIB parameters: 2009/03/16 17:24:15 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.2000000E+00 0.1000000E+01 14 Oxygen:Dissolved:SBE mL/L 10 -0.2500000E-01 0.1082600E+01 -CALIB parameters: 2009/03/16 21:24:06 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 14 Oxygen:Dissolved:SBE mL/L 10 0.1460000E+00 0.9148000E+00 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2009/03/16 21:30:54 11 channels removed. -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2009/03/17 09:32:24 Applied edit header: Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-HDR.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 4: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 5: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 -CALIB parameters: 2010/08/18 11:47:52 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\Trans Cor\2008-50-recal-tr.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Transmissivity %/metre 10 0.0000000E+00 0.1106000E+01 -HEADER EDITS: 2010/08/18 12:12:32 Applied edit header: Q:\Cruise_Data_Processing\Trans Cor\Trans_Correction1.TXT -HEADER EDITS: 2010/09/02 13:58:24 Channel 3: Transmissivity [%/metre] Format: F7.2 ==> F6.1 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-50\2008-50-0042.hex Software Version Seasave V 7.16 Temperature SN = 4054 Conductivity SN = 1766 Number of Bytes Per Scan = 37 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Sep 20 2008 01:57:35 NMEA Latitude = 49 05.55 N NMEA Longitude = 125 11.65 W NMEA UTC (Time) = Sep 20 2008 01:52:28 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2008-10 2008-50 Station: EF01 Latitude: Longitude: Depth (m): 34 # nquan = 16 # nvalues = 6465 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = altM: Altimeter [m] # name 10 = dz/dtM: Descent Rate [m/s] # name 11 = pumps: Pump Status # name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 13 = sal00: Salinity [PSU] # name 14 = sal11: Salinity, 2 [PSU] # name 15 = flag: flag # span 0 = 1, 6465 # span 1 = 0.402, 25.381 # span 2 = 11.7445, 17.3126 # span 3 = 11.7808, 17.3896 # span 4 = 2.713705, 3.782911 # span 5 = 2.644739, 3.749293 # span 6 = 27.6684, 81.5932 # span 7 = 5.2747e-01, 1.4875e+01 # span 8 = 3.1026, 4.0696 # span 9 = 0.00, 100.00 # span 10 = -0.870, 1.442 # span 11 = 0, 1 # span 12 = 7.09192, 9.52264 # span 13 = 19.8786, 31.7936 # span 14 = 19.2998, 31.6952 # span 15 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Sep 20 2008 01:57:35 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 4054, 16-Jan-08 # sensor 1 = Frequency 1 conductivity, primary, 1766, 07-May-08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 4700, 16-Jan-08 # sensor 4 = Frequency 4 conductivity, secondary, 2173, 07-May-08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005DR, 5-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4656, 11-Feb-03 # datcnv_date = Mar 11 2009 18:18:09, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2008-50\RAW\CTD\2008-50-0042.hex Q:\Crui se_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # wildedit_date = Mar 11 2009 21:57:39, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2008-50\Processing\convert\2008-50-004 2.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Mar 11 2009 22:01:07, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2008-50\Processing\wildedit\2008-50-0042 .cnv # celltm_alpha = 0.0245, 0.0300 # celltm_tau = 9.5000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Mar 11 2009 22:05:07, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2008-50\Processing\celltm\2008-50-0042.c nv Q:\Cruise_Data_Processing\2009-03\Processing\doc\2009-03-ctd1.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* CTDEDIT was used to remove surface records to 1.9db and records corrupted by shed wakes around 24db and from the bottom of the cast. Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0042.del2 ------------------------------------------------------------------ SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-50\2008-50-0042.hex Software Version Seasave V 7.16 Temperature SN = 4054 Conductivity SN = 1766 Number of Bytes Per Scan = 37 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Sep 20 2008 01:57:35 NMEA Latitude = 49 05.55 N NMEA Longitude = 125 11.65 W NMEA UTC (Time) = Sep 20 2008 01:52:28 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2008-10 2008-50 Station: EF01 Latitude: Longitude: Depth (m): 34 # nquan = 17 # nvalues = 6465 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = altM: Altimeter [m] # name 10 = dz/dtM: Descent Rate [m/s] # name 11 = pumps: Pump Status # name 12 = par: PAR/Irradiance, Biospherical/Licor # name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 14 = sal00: Salinity [PSU] # name 15 = sal11: Salinity, 2 [PSU] # name 16 = flag: flag # span 0 = 1, 6465 # span 1 = 0.402, 25.381 # span 2 = 11.7445, 17.3126 # span 3 = 11.7808, 17.3896 # span 4 = 2.713705, 3.782911 # span 5 = 2.644739, 3.749293 # span 6 = 27.6684, 81.5932 # span 7 = 5.2747e-01, 1.4875e+01 # span 8 = 3.1026, 4.0696 # span 9 = 0.00, 100.00 # span 10 = -0.870, 1.442 # span 11 = 0, 1 # span 12 = 3.5500e-01, 3.5500e-01 # span 13 = 6.08130, 8.16301 # span 14 = 19.8786, 31.7936 # span 15 = 19.2998, 31.6952 # span 16 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Sep 20 2008 01:57:35 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 4054, 16-Jan-08 # sensor 1 = Frequency 1 conductivity, primary, 1766, 07-May-08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 4700, 16-Jan-08 # sensor 4 = Frequency 4 conductivity, secondary, 2173, 07-May-08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005DR, 5-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4656, 11-Feb-03 # datcnv_date = Mar 16 2009 15:37:33, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2008-50\RAW\CTD\2008-50-0042.hex Q:\Crui se_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # wildedit_date = Mar 16 2009 15:40:16, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2008-50\Processing\convert\2008-50-004 2.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Mar 16 2009 15:43:43, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2008-50\Processing\wildedit\2008-50-0042 .cnv # celltm_alpha = 0.0245, 0.0300 # celltm_tau = 9.5000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Mar 16 2009 15:46:47, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2008-50\Processing\celltm\2008-50-0042.c nv Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* --------------------------------------------------------------------- Transmissivity and fluorescence are nominal and unedited except that some records were removed in editing temperature and salinity. The dissolved oxygen data in the CTD files should be considered: • ±1 ml/l from 0 – 75db • ±0.4 ml/l from 75 – 200db • ±0.2 ml/l below 200db ********************************************************************************* Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by a correction factor, which was based on assumptions that deep offshore transmissivity from a June 2009 cruise should be about 62%/m and that drift was linear with time between March 2008 and July 2009. The corrections produced reasonable results for all cruises in that time period. For details on how the correction factor was derived see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should be considered estimates. ********************************************************************************* *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0.2 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.25E-01 1.0826) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.146 0.9148) Transmissivity %/metre 10 -99 () (0 1.106) $END !--1--- ---2---- --3-- ---4--- --5--- --6-- ---7---- -8-- !Pressu Temperat Trans Fluores Oxygen Oxyge Salinity Numb !re ure: missi cence: : n: :T0:C0 er_o ! Primary vity URU: Dissol Disso ~bin ! Seapoin ved: lved: _rec ! t SBE SBE ords !------ -------- ----- ------- ------ ----- -------- ---- *END OF HEADER 2.3 16.8475 3.8 10.940 7.55 332.0 21.8889 10 3.0 15.3238 2.8 9.034 7.67 335.6 27.9489 22 4.0 14.8651 6.3 7.822 7.77 339.6 29.6933 20 5.0 14.9193 9.3 7.382 7.72 337.6 29.3490 17 6.0 14.6456 12.2 7.170 7.57 330.5 29.5729 17 7.0 14.4375 13.5 7.075 7.36 321.4 29.8777 18 8.0 13.7157 16.9 6.680 7.19 313.7 30.9711 18 9.0 13.3006 18.6 6.262 7.09 309.2 31.3767 15 10.0 13.1901 21.8 5.517 7.01 305.9 31.3947 17 11.0 13.1591 26.3 5.022 6.94 302.5 31.3766 17 12.0 13.0259 29.2 4.332 6.85 298.9 31.4179 17 13.0 12.8817 33.2 3.461 6.78 295.7 31.4606 17 14.0 12.7737 37.0 2.763 6.71 292.7 31.4993 17 15.0 12.7157 38.9 2.176 6.64 289.6 31.5201 17 16.0 12.5728 40.4 1.906 6.59 287.2 31.5281 17 17.0 12.4463 42.1 1.660 6.54 285.1 31.5328 17 18.0 12.3795 43.7 1.419 6.47 281.9 31.5475 17 19.0 12.3185 43.7 1.240 6.40 279.0 31.5709 18 20.0 12.2217 44.2 1.129 6.40 279.0 31.5790 18 21.0 12.2217 44.5 1.112 6.44 281.0 31.5991 24 22.0 12.1450 45.0 0.969 6.45 281.4 31.6265 31 23.0 12.0080 46.0 0.830 6.38 278.0 31.6470 33 24.0 11.9284 47.0 0.704 6.29 274.3 31.6618 31 25.0 11.7941 48.1 0.599 6.26 272.8 31.6675 38