*2010/09/02 13:58:24.45 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/09/19 08:53:55.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 38 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : C8B56B0A NUMBER OF CHANNELS : 8 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 2.3 38.5 2 Temperature:Primary 'deg C (ITS90)' 9.1026 12.9899 3 Transmissivity %/metre 31.2998 52.2032 4 Fluorescence:URU:Seapoint mg/m^3 0.201 3.023 5 Oxygen:Dissolved:SBE mL/L 2.79 7.05 6 Oxygen:Dissolved:SBE umol/kg 121.7 307.7 7 Salinity:T0:C0 PSS-78 31.3011 32.5289 8 Number_of_bin_records n/a 4 40 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 7 F ' ' 2 6 -99 ' ' 6 F ' ' 1 7 -99 ' ' 9 F ' ' 4 8 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-50\Pro Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0038.del2 ------------------------------------------------------------------ This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-50\Pro $END *ADMINISTRATION MISSION : 2008-50 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : LaPerouse SCIENTIST : Juhasz T. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : WCVI STATION : LD03 EVENT NUMBER : 38 LATITUDE : 48 56.60000 N ! (deg min) LONGITUDE : 125 50.66000 W ! (deg min) WATER DEPTH : 50 ALTIMETER (M) : 9.26 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0038.del2 ------------------------------------------------------------------ Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 4054 conductivity:primary ' ' 1766 pressure ' ' 63507 temperature:secondary ' ' 4700 conductivity:secondary ' ' 2173 Fluorometer ' ' Seapoint transmissometer:primary ' ' 1005DR Oxygen:SBE ' ' 1176 altimeter: ' ' ' ' irradiance:primary ' ' 4656 $END $REMARKS SOFTWARE VERSION SEASAVE V 7.16 Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0038.del2 ------------------------------------------------------------------ SOFTWARE VERSION SEASAVE V 7.16 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2009/03/11 22:26:32 4470 4470 CLEAN 5.0.2 2009/03/11 22:37:01 4460 4460 SHIFTDAT 3.4 2009/03/11 22:46:57 4460 4460 SHIFTDAT 3.4 2009/03/11 22:56:29 4460 4460 SHIFTDAT 3.4 2009/03/11 23:06:05 4460 4460 SHIFTDAT 3.4 2009/03/11 23:15:41 4460 4460 DELETE 6.3 2009/03/11 23:22:38 4460 1044 CTDEDIT 4.61 2009/03/14 17:07:40 1044 941 MERGE 3.3 2009/03/16 17:21:14 941 941 CALIB 11.7 2009/03/16 17:24:13 941 941 CALIB 11.7 2009/03/16 21:24:04 941 941 FILTERS 4.3 2009/03/16 21:29:17 941 941 BINAVE 4.1.1 2009/03/16 21:30:34 941 38 REMOVECH 8.0 2009/03/16 21:30:54 38 38 CHGUNITS 3.0 2009/03/17 08:54:19 38 38 REORDER 1.2.1 2009/03/17 09:29:32 ? ? HDREDIT2 2.5.1 2009/03/17 09:32:20 ? ? CALIB 11.7 2010/08/18 11:47:52 38 38 HDREDIT2 2.5.1 2010/08/18 12:12:32 ? ? HDREDIT2 2.5.1 2010/09/02 13:58:24 ? ? $END $REMARKS -CLEAN functions: 2009/03/11 22:29:22 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.30 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 50.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 28.64 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CTDEDIT 2009/03/14 17:07:40 103 records were deleted in this editing session. No data values were changed. -The following MERGE parameters were used: 2009/03/16 17:17:02 2009/03/16 17:17:05 2009/03/16 17:17: Merge Channel: Scan_Number [n/a] Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, Scan_Number Secondary Channels to Include: Temperature:Primary [deg C (ITS90)], Temperature:Secondary [deg C (ITS90)], Conductivity:Primary [S/m], Conductivity:Secondary [S/m], Transmissivity [%/metre], Fluorescence:Seapoint [mg/m^3], Oxygen:Voltage:SBE [volts], Altimeter [metres], Descent_Rate [m/s], Status:Pump [n/a], PAR [uE/m^2/sec], Oxygen:Dissolved:SBE [mL/L], Salinity:T0:C0 [PSS-78], Salinity:T1:C1 [PSS-78], Flag [n/a] Primary file : Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0038.edt Secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0038.del2 Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0038.del2 ------------------------------------------------------------------ -CLEAN functions: 2009/03/16 16:07:28 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.30 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 50.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 28.64 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CALIB parameters: 2009/03/16 17:24:13 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.2000000E+00 0.1000000E+01 14 Oxygen:Dissolved:SBE mL/L 10 -0.2500000E-01 0.1082600E+01 -CALIB parameters: 2009/03/16 21:24:04 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 14 Oxygen:Dissolved:SBE mL/L 10 0.1460000E+00 0.9148000E+00 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2009/03/16 21:30:54 11 channels removed. -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2009/03/17 09:32:20 Applied edit header: Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-HDR.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 4: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 5: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 -CALIB parameters: 2010/08/18 11:47:52 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\Trans Cor\2008-50-recal-tr.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Transmissivity %/metre 10 0.0000000E+00 0.1106000E+01 -HEADER EDITS: 2010/08/18 12:12:32 Applied edit header: Q:\Cruise_Data_Processing\Trans Cor\Trans_Correction1.TXT -HEADER EDITS: 2010/09/02 13:58:24 Channel 3: Transmissivity [%/metre] Format: F7.2 ==> F6.1 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-50\2008-50-0038.hex Software Version Seasave V 7.16 Temperature SN = 4054 Conductivity SN = 1766 Number of Bytes Per Scan = 37 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Sep 19 2008 08:55:47 NMEA Latitude = 48 56.60 N NMEA Longitude = 125 50.66 W NMEA UTC (Time) = Sep 19 2008 08:53:55 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2008-10 2008-50 Station: LD3 Latitude: Longitude: Depth (m): 50 # nquan = 16 # nvalues = 4470 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = altM: Altimeter [m] # name 10 = dz/dtM: Descent Rate [m/s] # name 11 = pumps: Pump Status # name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 13 = sal00: Salinity [PSU] # name 14 = sal11: Salinity, 2 [PSU] # name 15 = flag: flag # span 0 = 1, 4470 # span 1 = 1.020, 38.640 # span 2 = 9.0878, 12.9955 # span 3 = 9.0883, 12.9954 # span 4 = 3.486403, 3.721810 # span 5 = 3.486571, 3.721969 # span 6 = 71.7754, 82.9609 # span 7 = 1.9414e-01, 4.2857e+00 # span 8 = 1.5763, 3.5482 # span 9 = 0.00, 100.00 # span 10 = -1.289, 1.261 # span 11 = 0, 1 # span 12 = 3.10098, 8.16781 # span 13 = 31.2974, 32.5664 # span 14 = 31.2967, 32.5672 # span 15 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Sep 19 2008 08:55:47 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 4054, 16-Jan-08 # sensor 1 = Frequency 1 conductivity, primary, 1766, 07-May-08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 4700, 16-Jan-08 # sensor 4 = Frequency 4 conductivity, secondary, 2173, 07-May-08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005DR, 5-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4656, 11-Feb-03 # datcnv_date = Mar 11 2009 18:18:07, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2008-50\RAW\CTD\2008-50-0038.hex Q:\Crui se_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # wildedit_date = Mar 11 2009 21:57:37, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2008-50\Processing\convert\2008-50-003 8.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Mar 11 2009 22:01:05, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2008-50\Processing\wildedit\2008-50-0038 .cnv # celltm_alpha = 0.0245, 0.0300 # celltm_tau = 9.5000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Mar 11 2009 22:05:05, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2008-50\Processing\celltm\2008-50-0038.c nv Q:\Cruise_Data_Processing\2009-03\Processing\doc\2009-03-ctd1.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* CTDEDIT was used to remove surface records to 1.9db and records corrupted by shed wakes from the bottom of the cast. Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0038.del2 ------------------------------------------------------------------ SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-50\2008-50-0038.hex Software Version Seasave V 7.16 Temperature SN = 4054 Conductivity SN = 1766 Number of Bytes Per Scan = 37 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Sep 19 2008 08:55:47 NMEA Latitude = 48 56.60 N NMEA Longitude = 125 50.66 W NMEA UTC (Time) = Sep 19 2008 08:53:55 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2008-10 2008-50 Station: LD3 Latitude: Longitude: Depth (m): 50 # nquan = 17 # nvalues = 4470 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = altM: Altimeter [m] # name 10 = dz/dtM: Descent Rate [m/s] # name 11 = pumps: Pump Status # name 12 = par: PAR/Irradiance, Biospherical/Licor # name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 14 = sal00: Salinity [PSU] # name 15 = sal11: Salinity, 2 [PSU] # name 16 = flag: flag # span 0 = 1, 4470 # span 1 = 1.020, 38.640 # span 2 = 9.0878, 12.9955 # span 3 = 9.0883, 12.9954 # span 4 = 3.486403, 3.721810 # span 5 = 3.486571, 3.721969 # span 6 = 71.7754, 82.9609 # span 7 = 1.9414e-01, 4.2857e+00 # span 8 = 1.5763, 3.5482 # span 9 = 0.00, 100.00 # span 10 = -1.289, 1.261 # span 11 = 0, 1 # span 12 = 3.5500e-01, 3.5500e-01 # span 13 = 2.62450, 7.00425 # span 14 = 31.2974, 32.5664 # span 15 = 31.2967, 32.5672 # span 16 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Sep 19 2008 08:55:47 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 4054, 16-Jan-08 # sensor 1 = Frequency 1 conductivity, primary, 1766, 07-May-08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 4700, 16-Jan-08 # sensor 4 = Frequency 4 conductivity, secondary, 2173, 07-May-08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005DR, 5-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4656, 11-Feb-03 # datcnv_date = Mar 16 2009 15:37:31, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2008-50\RAW\CTD\2008-50-0038.hex Q:\Crui se_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # wildedit_date = Mar 16 2009 15:40:14, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2008-50\Processing\convert\2008-50-003 8.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Mar 16 2009 15:43:40, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2008-50\Processing\wildedit\2008-50-0038 .cnv # celltm_alpha = 0.0245, 0.0300 # celltm_tau = 9.5000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Mar 16 2009 15:46:44, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2008-50\Processing\celltm\2008-50-0038.c nv Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* --------------------------------------------------------------------- Transmissivity and fluorescence are nominal and unedited except that some records were removed in editing temperature and salinity. The dissolved oxygen data in the CTD files should be considered: • ±1 ml/l from 0 – 75db • ±0.4 ml/l from 75 – 200db • ±0.2 ml/l below 200db ********************************************************************************* Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by a correction factor, which was based on assumptions that deep offshore transmissivity from a June 2009 cruise should be about 62%/m and that drift was linear with time between March 2008 and July 2009. The corrections produced reasonable results for all cruises in that time period. For details on how the correction factor was derived see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc These data should be considered estimates. ********************************************************************************* *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0.2 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.25E-01 1.0826) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.146 0.9148) Transmissivity %/metre 10 -99 () (0 1.106) $END !--1--- ---2---- --3-- ---4--- --5--- --6-- ---7---- -8-- !Pressu Temperat Trans Fluores Oxygen Oxyge Salinity Numb !re ure: missi cence: : n: :T0:C0 er_o ! Primary vity URU: Dissol Disso ~bin ! Seapoin ved: lved: _rec ! t SBE SBE ords !------ -------- ----- ------- ------ ----- -------- ---- *END OF HEADER 2.3 12.9371 31.4 2.602 7.05 307.7 31.3011 13 3.0 12.9377 31.4 2.669 7.05 307.5 31.3016 30 4.0 12.9400 31.4 2.705 7.03 306.8 31.3035 27 5.0 12.9433 31.3 2.694 7.03 306.8 31.3077 33 6.0 12.9583 31.3 2.807 7.02 306.3 31.3260 31 7.0 12.9733 31.5 2.877 6.98 304.5 31.3459 22 8.0 12.9899 32.6 2.760 6.89 300.6 31.3813 21 9.0 12.9898 33.7 2.781 6.79 296.1 31.4074 23 10.0 12.9833 34.4 2.851 6.70 292.3 31.4309 30 11.0 12.9741 34.3 3.023 6.55 285.9 31.4631 31 12.0 12.8747 34.5 2.777 6.09 265.7 31.5010 22 13.0 12.4337 39.2 2.013 5.64 245.9 31.5816 19 14.0 12.2638 40.8 1.523 5.22 227.6 31.6110 20 15.1 11.6947 42.0 1.303 4.59 200.1 31.7403 29 16.0 11.1262 47.2 0.846 4.11 179.2 31.8731 40 17.0 10.9603 49.5 0.591 4.03 175.8 31.9330 24 18.0 10.8892 50.0 0.522 3.99 173.8 31.9492 19 19.0 10.7424 50.1 0.465 3.91 170.5 31.9796 20 20.0 10.5205 51.0 0.358 3.82 166.3 32.0619 23 21.0 10.4216 51.3 0.319 3.74 162.9 32.0695 26 22.0 10.3124 51.4 0.311 3.68 160.3 32.0807 24 23.0 10.1549 51.5 0.293 3.61 157.1 32.1047 23 24.0 9.9673 51.7 0.258 3.51 153.0 32.1129 25 25.0 9.8168 51.5 0.281 3.43 149.6 32.1239 30 26.0 9.7894 51.8 0.248 3.41 148.5 32.1279 26 27.0 9.7929 51.8 0.249 3.40 148.2 32.1332 22 28.0 9.8142 51.9 0.242 3.38 147.1 32.1512 20 29.0 9.6898 52.1 0.229 3.30 143.9 32.1821 24 30.0 9.5421 52.2 0.224 3.20 139.5 32.2175 31 31.0 9.4392 52.2 0.221 3.13 136.2 32.2516 28 32.0 9.4070 51.8 0.223 3.09 134.5 32.2665 24 33.0 9.3761 51.5 0.224 3.06 133.4 32.2828 23 34.0 9.3275 50.8 0.218 3.02 131.6 32.3142 22 35.0 9.3027 50.3 0.235 3.00 130.5 32.3321 23 36.0 9.2876 50.0 0.227 2.97 129.6 32.3431 27 37.0 9.2374 49.3 0.223 2.91 126.9 32.3866 29 38.0 9.1385 49.9 0.218 2.82 122.9 32.4778 33 38.5 9.1026 50.1 0.201 2.79 121.7 32.5289 4