*2010/09/02 13:58:20.36 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/09/13 07:16:06.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 54 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 83D5F2A2 NUMBER OF CHANNELS : 9 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 2.3 55.1 2 Temperature:Primary 'deg C (ITS90)' 8.1336 8.7764 3 Transmissivity %/metre 34.9496 38.157 4 Fluorescence:URU:Seapoint mg/m^3 0.497 1.783 5 PAR uE/m^2/sec 0.5 1 6 Oxygen:Dissolved:SBE mL/L 3.09 3.9 7 Oxygen:Dissolved:SBE umol/kg 134.7 170.2 8 Salinity:T0:C0 PSS-78 30.73 31.4596 9 Number_of_bin_records n/a 15 38 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 7 F ' ' 1 6 -99 ' ' 7 F ' ' 2 7 -99 ' ' 6 F ' ' 1 8 -99 ' ' 9 F ' ' 4 9 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-50\Pro Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.rem2 ------------------------------------------------------------------ This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-50\Pro Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.del2 ------------------------------------------------------------------ This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-50\Pro $END *ADMINISTRATION MISSION : 2008-50 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : LaPerouse SCIENTIST : Juhasz T. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : WCVI STATION : Kn0 EVENT NUMBER : 7 LATITUDE : 50 38.28000 N ! (deg min) LONGITUDE : 126 35.01000 W ! (deg min) WATER DEPTH : 64 ALTIMETER (M) : 8.72 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.rem2 ------------------------------------------------------------------ Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.del2 ------------------------------------------------------------------ Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 4054 conductivity:primary ' ' 1766 pressure ' ' 63507 temperature:secondary ' ' 4700 conductivity:secondary ' ' 2173 Fluorometer ' ' Seapoint transmissometer:primary ' ' 1005DR Oxygen:SBE ' ' 1176 altimeter: ' ' ' ' irradiance:primary ' ' 4656 $END $REMARKS SOFTWARE VERSION SEASAVE V 7.16 Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.rem2 ------------------------------------------------------------------ SOFTWARE VERSION SEASAVE V 7.16 Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.del2 ------------------------------------------------------------------ SOFTWARE VERSION SEASAVE V 7.16 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2009/03/11 22:19:53 9077 9077 CLEAN 5.0.2 2009/03/11 22:30:22 8984 8984 SHIFTDAT 3.4 2009/03/11 22:40:45 8984 8984 SHIFTDAT 3.4 2009/03/11 22:50:22 8984 8984 SHIFTDAT 3.4 2009/03/11 22:59:54 8984 8984 SHIFTDAT 3.4 2009/03/11 23:09:31 8984 8984 DELETE 6.3 2009/03/11 23:18:54 8984 1374 CTDEDIT 4.61 2009/03/14 14:03:59 1374 1320 MERGE 3.3 2009/03/16 10:16:24 1320 1320 MERGE 3.3 2009/03/16 17:17:05 1320 1320 CALIB 11.7 2009/03/16 17:22:20 1320 1320 CALIB 11.7 2009/03/16 21:22:11 1320 1320 FILTERS 4.3 2009/03/16 21:27:33 1320 1320 BINAVE 4.1.1 2009/03/16 21:29:44 1320 54 REMOVECH 8.0 2009/03/16 21:30:45 54 54 CHGUNITS 3.0 2009/03/17 08:54:11 54 54 REORDER 1.2.1 2009/03/17 09:29:26 ? ? HDREDIT2 2.5.1 2009/03/17 09:31:57 ? ? CALIB 11.7 2010/08/18 11:47:48 54 54 HDREDIT2 2.5.1 2010/08/18 12:12:29 ? ? HDREDIT2 2.5.1 2010/09/02 13:58:20 ? ? $END $REMARKS -CLEAN functions: 2009/03/11 22:29:22 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.30 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 50.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 45.25 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CTDEDIT 2009/03/14 14:03:59 54 records were deleted in this editing session. 3 changes in channel Salinity:T0:C0 -The following MERGE parameters were used: 2009/03/16 10:16:05 2009/03/16 10:16:14 2009/03/16 10:16: Merge Channel: Pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: PAR Primary file : Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.edu Secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.rem2 Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.rem2 ------------------------------------------------------------------ -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 45.30 dbars Sample interval (from FILE section of header) = 0.042 seconds. -REMOVECH 2009/03/15 10:32:50 11 channels removed. -The following MERGE parameters were used: 2009/03/16 17:17:02 2009/03/16 17:17:05 Merge Channel: Scan_Number [n/a] Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Pressure, Scan_Number Secondary Channels to Include: Temperature:Primary [deg C (ITS90)], Temperature:Secondary [deg C (ITS90)], Conductivity:Primary [S/m], Conductivity:Secondary [S/m], Transmissivity [%/metre], Fluorescence:Seapoint [mg/m^3], Oxygen:Voltage:SBE [volts], Altimeter [metres], Descent_Rate [m/s], Status:Pump [n/a], PAR [uE/m^2/sec], Oxygen:Dissolved:SBE [mL/L], Salinity:T0:C0 [PSS-78], Salinity:T1:C1 [PSS-78], Flag [n/a] Primary file : Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.edt Secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.del2 Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.del2 ------------------------------------------------------------------ -CLEAN functions: 2009/03/16 16:07:28 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.30 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= 0.20 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 50.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 45.25 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CALIB parameters: 2009/03/16 17:22:20 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 2 Pressure dbars 10 0.2000000E+00 0.1000000E+01 14 Oxygen:Dissolved:SBE mL/L 10 -0.2500000E-01 0.1082600E+01 -CALIB parameters: 2009/03/16 21:22:11 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 14 Oxygen:Dissolved:SBE mL/L 10 0.1460000E+00 0.9148000E+00 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2009/03/16 21:30:45 10 channels removed. -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2009/03/17 09:31:57 Applied edit header: Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-HDR.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 4: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 6: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 5: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 -CALIB parameters: 2010/08/18 11:47:48 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\Trans Cor\2008-50-recal-tr.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Transmissivity %/metre 10 0.0000000E+00 0.1106000E+01 -HEADER EDITS: 2010/08/18 12:12:29 -HEADER EDITS: 2010/09/02 13:58:20 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-50\2008-50-0007.hex Software Version Seasave V 7.16 Temperature SN = 4054 Conductivity SN = 1766 Number of Bytes Per Scan = 37 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Sep 13 2008 07:17:13 NMEA Latitude = 50 38.28 N NMEA Longitude = 126 35.01 W NMEA UTC (Time) = Sep 13 2008 07:16:06 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2008-10 2008-50 Station: Kn0 Latitude: Longitude: Depth (m): 64 # nquan = 16 # nvalues = 9077 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = altM: Altimeter [m] # name 10 = dz/dtM: Descent Rate [m/s] # name 11 = pumps: Pump Status # name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 13 = sal00: Salinity [PSU] # name 14 = sal11: Salinity, 2 [PSU] # name 15 = flag: flag # span 0 = 1, 9077 # span 1 = 1.576, 55.251 # span 2 = 8.0838, 8.7795 # span 3 = 8.0974, 8.7791 # span 4 = 3.284381, 3.308105 # span 5 = 3.284378, 3.307949 # span 6 = 72.8500, 77.9298 # span 7 = 3.5531e-01, 2.3883e+00 # span 8 = 1.6581, 2.0281 # span 9 = 3.17, 64.76 # span 10 = -1.090, 1.006 # span 11 = 0, 1 # span 12 = 3.46034, 4.50073 # span 13 = 30.7257, 31.5107 # span 14 = 30.7255, 31.4970 # span 15 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Sep 13 2008 07:17:13 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 4054, 16-Jan-08 # sensor 1 = Frequency 1 conductivity, primary, 1766, 07-May-08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 4700, 16-Jan-08 # sensor 4 = Frequency 4 conductivity, secondary, 2173, 07-May-08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005DR, 5-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4656, 11-Feb-03 # datcnv_date = Mar 11 2009 18:17:08, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2008-50\RAW\CTD\2008-50-0007.hex Q:\Crui se_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # wildedit_date = Mar 11 2009 21:56:29, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2008-50\Processing\convert\2008-50-000 7.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Mar 11 2009 21:59:56, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2008-50\Processing\wildedit\2008-50-0007 .cnv # celltm_alpha = 0.0245, 0.0300 # celltm_tau = 9.5000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Mar 11 2009 22:03:30, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2008-50\Processing\celltm\2008-50-0007.c nv Q:\Cruise_Data_Processing\2009-03\Processing\doc\2009-03-ctd1.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* CTDEDIT was used to remove surface records to 1.9db and records around 5 and 55db; salinity was cleaned very lightly. Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.rem2 ------------------------------------------------------------------ SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-50\2008-50-0007.hex Software Version Seasave V 7.16 Temperature SN = 4054 Conductivity SN = 1766 Number of Bytes Per Scan = 37 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Sep 13 2008 07:17:13 NMEA Latitude = 50 38.28 N NMEA Longitude = 126 35.01 W NMEA UTC (Time) = Sep 13 2008 07:16:06 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2008-10 2008-50 Station: Kn0 Latitude: Longitude: Depth (m): 64 # nquan = 14 # nvalues = 9077 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = altM: Altimeter [m] # name 10 = dz/dtM: Descent Rate [m/s] # name 11 = pumps: Pump Status # name 12 = par: PAR/Irradiance, Biospherical/Licor # name 13 = flag: 0.000e+00 # span 0 = 1, 9077 # span 1 = 1.576, 55.301 # span 2 = 8.0838, 8.7795 # span 3 = 8.0974, 8.7791 # span 4 = 3.284379, 3.308083 # span 5 = 3.284296, 3.308104 # span 6 = 72.8500, 77.9298 # span 7 = 3.5531e-01, 2.3883e+00 # span 8 = 1.6581, 2.0281 # span 9 = 3.17, 64.76 # span 10 = -1.090, 1.006 # span 11 = 0, 1 # span 12 = 4.9745e-01, 1.1759e+00 # span 13 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Sep 13 2008 07:17:13 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 4054, 16-Jan-08 # sensor 1 = Frequency 1 conductivity, primary, 1766, 07-May-08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 4700, 16-Jan-08 # sensor 4 = Frequency 4 conductivity, secondary, 2173, 07-May-08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005DR, 5-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4656, 11-Feb-03 # datcnv_date = Mar 15 2009 09:57:35, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2008-50\RAW\CTD\2008-50-0007.hex Q:\Crui se_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # file_type = ascii END* Comments from secondary file: Q:\Cruise_Data_Processing\2008-50\Processing\ios\2008-50-0007.del2 ------------------------------------------------------------------ SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-50\2008-50-0007.hex Software Version Seasave V 7.16 Temperature SN = 4054 Conductivity SN = 1766 Number of Bytes Per Scan = 37 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Sep 13 2008 07:17:13 NMEA Latitude = 50 38.28 N NMEA Longitude = 126 35.01 W NMEA UTC (Time) = Sep 13 2008 07:16:06 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2008-10 2008-50 Station: Kn0 Latitude: Longitude: Depth (m): 64 # nquan = 17 # nvalues = 9077 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = altM: Altimeter [m] # name 10 = dz/dtM: Descent Rate [m/s] # name 11 = pumps: Pump Status # name 12 = par: PAR/Irradiance, Biospherical/Licor # name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 14 = sal00: Salinity [PSU] # name 15 = sal11: Salinity, 2 [PSU] # name 16 = flag: flag # span 0 = 1, 9077 # span 1 = 1.576, 55.251 # span 2 = 8.0838, 8.7795 # span 3 = 8.0974, 8.7791 # span 4 = 3.284381, 3.308105 # span 5 = 3.284378, 3.307949 # span 6 = 72.8500, 77.9298 # span 7 = 3.5531e-01, 2.3883e+00 # span 8 = 1.6581, 2.0281 # span 9 = 3.17, 64.76 # span 10 = -1.090, 1.006 # span 11 = 0, 1 # span 12 = 4.9745e-01, 1.1759e+00 # span 13 = 2.93450, 3.83381 # span 14 = 30.7257, 31.5107 # span 15 = 30.7255, 31.4970 # span 16 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Sep 13 2008 07:17:13 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 4054, 16-Jan-08 # sensor 1 = Frequency 1 conductivity, primary, 1766, 07-May-08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 4700, 16-Jan-08 # sensor 4 = Frequency 4 conductivity, secondary, 2173, 07-May-08, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005DR, 5-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4656, 11-Feb-03 # datcnv_date = Mar 16 2009 15:36:17, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2008-50\RAW\CTD\2008-50-0007.hex Q:\Crui se_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # wildedit_date = Mar 16 2009 15:38:58, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2008-50\Processing\convert\2008-50-000 7.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Mar 16 2009 15:42:26, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2008-50\Processing\wildedit\2008-50-0007 .cnv # celltm_alpha = 0.0245, 0.0300 # celltm_tau = 9.5000, 9.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Mar 16 2009 15:45:08, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2008-50\Processing\celltm\2008-50-0007.c nv Q:\Cruise_Data_Processing\2008-50\Processing\doc\2008-50-ctd.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* --------------------------------------------------------------------- Transmissivity and fluorescence are nominal and unedited except that some records were removed in editing temperature and salinity. The dissolved oxygen data in the CTD files should be considered: • ±1 ml/l from 0 – 75db • ±0.4 ml/l from 75 – 200db • ±0.2 ml/l below 200db ********************************************************************************* Transmissometer #1005DR was calibrated in March 2008, and drifted significantly but steadily until July 2009; then a sudden shift occurred, so that maximum values between September 2009 and July 2010 were very low, ~25%/m. In August 2010 a study was made of transmissivity that led to a decision to apply post-processing corrections to all cruises between March 2008 and June 2010. Transmissivity data from this cruise were corrected by multiplying the original values by a correction factor, which was based on assumptions that deep offshore transmissivity from a June 2009 cruise should be about 62%/m and that drift was linear with time between March 2008 and July 2009. The corrections produced reasonable results for all cruises in that time period. For details on how the correction factor was derived see: OSD_Data_Archive:\Cruise_Data\DOCUMENTS\Transmissometer 1005DR Corrections.doc *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- --------- ---- ------ ------------ Pressure dbars 10 -99 () (0.2 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.25E-01 1.0826) Oxygen:Dissolved:SBE mL/L 10 -99 () (0.146 0.9148) Transmissivity %/metre 10 -99 () (0 1.106) $END !--1--- ---2---- --3-- ---4--- --5--- --6--- --7-- ---8---- -9-- !Pressu Temperat Trans Fluores PAR Oxygen Oxyge Salinity Numb !re ure: missi cence: : n: :T0:C0 er_o ! Primary vity URU: Dissol Disso ~bin ! Seapoin ved: lved: _rec ! t SBE SBE ords !------ -------- ----- ------- ------ ------ ----- -------- ---- *END OF HEADER 2.3 8.7764 37.7 1.783 1.0 3.90 170.2 30.7300 21 3.0 8.7757 37.5 1.649 0.9 3.90 169.9 30.7302 31 4.0 8.7762 37.2 1.620 0.7 3.90 170.2 30.7303 26 4.9 8.7760 37.0 1.594 0.6 3.89 169.8 30.7303 15 6.0 8.7760 36.7 1.513 0.6 3.90 169.9 30.7306 26 7.0 8.7736 36.9 1.615 0.6 3.89 169.8 30.7328 26 8.0 8.7726 37.0 1.602 0.5 3.88 169.4 30.7339 25 9.0 8.7485 36.9 1.475 0.5 3.85 167.7 30.7586 24 10.0 8.7181 36.9 1.487 0.5 3.81 165.9 30.7963 24 11.0 8.7124 37.0 1.505 0.5 3.78 165.0 30.8073 24 12.0 8.7097 36.8 1.470 0.5 3.77 164.4 30.8146 25 13.0 8.6990 36.8 1.333 0.5 3.75 163.7 30.8356 23 14.0 8.6898 36.6 1.423 0.5 3.74 163.1 30.8557 24 15.0 8.6847 36.8 1.311 0.5 3.74 163.0 30.8652 24 16.0 8.6823 36.9 1.278 0.5 3.72 162.2 30.8700 24 17.0 8.6497 37.2 1.167 0.5 3.67 160.2 30.9325 25 18.0 8.6263 37.2 1.390 0.5 3.64 158.9 30.9701 23 19.0 8.6214 37.5 1.297 0.5 3.62 157.7 30.9786 24 20.0 8.5931 37.6 1.221 0.5 3.58 156.2 31.0281 24 21.0 8.5731 37.7 1.195 0.5 3.57 155.4 31.0598 25 22.0 8.5666 37.8 1.234 0.5 3.55 154.6 31.0700 24 23.0 8.5456 38.0 1.082 0.5 3.52 153.3 31.1034 24 24.0 8.5296 38.0 1.061 0.5 3.50 152.4 31.1291 24 25.0 8.5256 38.2 1.030 0.5 3.49 152.1 31.1325 24 26.0 8.5159 38.0 0.924 0.5 3.48 151.6 31.1495 24 27.0 8.5115 37.6 0.978 0.5 3.47 151.3 31.1625 24 28.0 8.5126 37.9 1.225 0.5 3.46 151.0 31.1748 25 29.0 8.5121 38.0 1.514 0.5 3.46 151.0 31.1726 24 30.0 8.5101 37.6 1.548 0.5 3.46 150.8 31.1779 24 31.0 8.5085 37.6 1.151 0.5 3.46 150.7 31.1818 24 32.0 8.5062 37.4 1.029 0.5 3.46 150.7 31.1840 25 33.0 8.4997 37.2 0.918 0.5 3.45 150.2 31.1897 24 34.0 8.4903 37.5 0.855 0.5 3.43 149.4 31.1991 22 35.0 8.4628 37.3 0.818 0.5 3.40 148.4 31.2112 20 36.0 8.4554 37.4 0.866 0.5 3.39 147.9 31.2137 25 37.0 8.4544 37.5 0.918 0.5 3.39 148.0 31.2135 24 38.0 8.4530 37.0 0.948 0.5 3.39 147.9 31.2146 24 39.0 8.4512 37.4 0.850 0.5 3.39 147.9 31.2153 25 40.0 8.4502 36.8 0.762 0.5 3.40 148.2 31.2134 24 41.0 8.4496 37.2 0.721 0.5 3.40 148.2 31.2151 25 42.0 8.4478 36.8 0.739 0.5 3.39 147.6 31.2179 24 43.0 8.4429 37.2 0.733 0.5 3.38 147.1 31.2187 24 44.0 8.4379 37.0 0.846 0.5 3.37 147.0 31.2190 25 45.0 8.4226 37.2 0.775 0.5 3.36 146.2 31.2254 24 46.0 8.3892 36.7 0.757 0.5 3.31 144.1 31.2497 24 47.0 8.3114 36.6 0.701 0.5 3.25 141.8 31.3019 24 48.0 8.2880 36.6 0.711 0.5 3.21 139.9 31.3205 25 49.0 8.2287 36.2 0.668 0.5 3.17 138.3 31.3694 24 50.0 8.2081 36.1 0.646 0.5 3.14 137.0 31.3869 24 51.0 8.1824 35.5 0.622 0.5 3.13 136.3 31.4105 24 52.0 8.1688 35.4 0.553 0.5 3.12 136.0 31.4229 24 53.0 8.1619 35.3 0.524 0.5 3.11 135.6 31.4292 26 54.0 8.1538 35.0 0.534 0.5 3.11 135.4 31.4372 28 55.1 8.1336 35.9 0.497 0.5 3.09 134.7 31.4596 38