*2008/08/04 10:50:26.29 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/06/19 22:43:11.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 23 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : AB01E063 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.2 22.5 2 Temperature 'deg C (ITS90)' 8.3083 12.08988 3 Salinity:T0:C0 PSS-78 17.16186 30.0936 4 Number_of_bin_records n/a 1 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-23\Pro $END *ADMINISTRATION MISSION : 2008-23 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Sea Lice Monitoring SCIENTIST : Hargreaves B. PLATFORM : Franciscan NO 1 *LOCATION GEOGRAPHIC AREA : Broughton Archipelago STATION : CHOP BAY EVENT NUMBER : 12 LATITUDE : 50 38.89500 N ! (deg min) LONGITUDE : 126 30.34000 W ! (deg min) WATER DEPTH : 25 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 5299 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 5299 conductivity ' ' 5299 Pressure ' ' 0464 $END $REMARKS SOFTWARE VERSION 1.53 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2008/08/01 15:15:36 799 799 HDREDIT2 2.5.1 2008/08/01 15:18:30 ? ? CLEAN 5.0.2 2008/08/01 18:05:52 ? ? ADTIMCH 4.3 2008/08/02 14:42:57 799 799 SHIFTDAT 3.4 2008/08/02 15:51:22 799 799 DELETE 6.3 2008/08/02 16:13:07 799 162 CLIP 1.3 2008/08/02 16:20:13 162 159 BINAVE 4.1.1 2008/08/02 17:42:13 159 23 REMOVECH 8.0 2008/08/04 10:49:47 23 23 HDREDIT2 2.5.1 2008/08/04 10:50:26 ? ? $END $REMARKS -HEADER EDITS: 2008/08/01 15:18:30 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr Channel 2: Pressure [decibar] Units: dbars ==> decibar -CLEAN functions: 2008/08/01 18:05:50 20 Set event to last 4 characters of file name -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 12.50 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/08/04 10:49:47 4 channels removed. -HEADER EDITS: 2008/08/04 10:50:26 Applied edit header: Q:\Cruise_Data_Processing\2008-23\Processing\doc\2008-23-hdr.txt $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\Walker Rock\My Documents\CTD data\2008\Ju ne 19\June 19 2008012.hex Software Version 1.53 Temperature SN = 5299 Conductivity SN = 5299 System UpLoad Time = Jun 19 2008 16:54:49 ds SeacatPlus V 1.6b SERIAL NO. 5299 19 Jun 2008 17:05:26 vbatt = 12.5, vlith = 8.4, ioper = 62.0 ma, ipump = 61.6 ma, status = not logging number of scans to average = 1 samples = 11591, free = 751009, casts = 12 mode = profile, minimum cond freq = 2900, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 870.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> SeacatPlus V 1.6b SERIAL NO. 5299 19 Jun 2008 17:05:35 temperature: 20-dec-07 TA0 = 1.239780e-03 TA1 = 2.568902e-04 TA2 = 2.939242e-07 TA3 = 1.275296e-07 TOFFSET = 0.000000e+00 conductivity: 20-dec-07 G = -9.996093e-01 H = 1.257222e-01 I = -3.921464e-04 J = 4.366159e-05 CF0 = 2.828559e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 2651408, range = 870 psia: 18-dec-07 PA0 = 1.855029e+00 PA1 = 2.644191e-03 PA2 = 2.397141e-11 PTCA0 = 5.240580e+05 PTCA1 = 5.275216e+01 PTCA2 = -8.601253e-01 PTCB0 = 2.543188e+01 PTCB1 = 7.750000e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -6.165396e+01 PTEMPA1 = 5.373011e+01 PTEMPA2 = -6.133162e-01 POFFSET = 0.000000e+00 volt 0: offset = -4.844105e-02, slope = 1.246264e+00 volt 1: offset = -4.821895e-02, slope = 1.246629e+00 volt 2: offset = -4.817895e-02, slope = 1.246666e+00 volt 3: offset = -4.868737e-02, slope = 1.247244e+00 EXTFREQSF = 1.000032e+00 dh cast 12 19 Jun 2008 15:43:11 samples 10793 to 11591, avg = 1, stop = mag swit ch S> # nquan = 7 # nvalues = 799 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 799 # span 1 = 0.211, 22.502 # span 2 = 8.3065, 12.1176 # span 3 = 0.239695, 3.187254 # span 4 = -0.657, 0.733 # span 5 = 1.6783, 30.0949 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = Jun 19 2008 15:43:11 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 5299, 20 Dec-07 # sensor 1 = Frequency 1 conductivity, 5299, 20-Dec-07, cpcor = -9.5700e-08 # sensor 2 = Pressure Number, 0464 # datcnv_date = Jul 28 2008 11:17:10, 7.18 # datcnv_in = Q:\Cruise_Data_Processing\2008-23\Processing\2008-23-0012.hex Q:\C ruise_Data_Processing\2008-23\Processing\doc\2008-23-ctd.con # datcnv_skipover = 0 # filter_date = Aug 01 2008 15:13:03, 7.18 # filter_in = Q:\Cruise_Data_Processing\2008-23\Processing\convert\2008-23-0012. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 1.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Aug 01 2008 15:13:50, 7.18 # Derive_in = Q:\Cruise_Data_Processing\2008-23\Processing\test\2008-23-0012.cnv Q:\Cruise_Data_Processing\2008-41\RAW\CTD\2008-41-0035.con # file_type = ascii END* ---------------------------------------------------------------------- There was no salinity calibration sampling and information available from previous uses was considered unreliable, so no recalibration has been applied to the salinity data. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05units in areas of high gradients. However, this cruise had large gradients only at the surface and the descent rate was generally very steady, so the errors should be much smaller than that. ---------------------------------------------------------------------- !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.2 12.0899 17.1619 5 1.9 12.0526 17.3188 9 2.9 11.9233 17.7776 6 3.9 11.8481 18.2652 7 5.0 11.0289 21.5592 7 6.0 9.4630 26.7599 6 6.9 9.1055 28.1263 7 7.9 9.0247 28.4130 7 8.9 8.8389 28.7656 7 9.9 8.6711 29.1073 7 10.9 8.5959 29.3078 8 11.9 8.5391 29.4522 6 12.9 8.5270 29.4889 8 13.9 8.5161 29.5223 7 15.0 8.4449 29.7031 7 15.9 8.3611 29.9137 6 16.9 8.3490 29.9621 7 18.0 8.3335 30.0184 7 19.0 8.3260 30.0540 8 20.0 8.3137 30.0814 8 20.9 8.3103 30.0936 8 22.0 8.3103 30.0899 10 22.5 8.3083 30.0927 1