*2008/08/04 10:46:59.18 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/05/28 21:33:33.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 24 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 81B323F5 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.25 23.5 2 Temperature 'deg C (ITS90)' 7.858634 12.91375 3 Salinity:T0:C0 PSS-78 17.60617 31.02712 4 Number_of_bin_records n/a 1 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-22\Pro $END *ADMINISTRATION MISSION : 2008-22 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Sea Lice Monitoring SCIENTIST : Hargreaves B. PLATFORM : Franciscan NO 1 *LOCATION GEOGRAPHIC AREA : Broughton Archipelago STATION : DINNER PT (P) EVENT NUMBER : 101 LATITUDE : 50 37.54300 N ! (deg min) LONGITUDE : 126 30.44800 W ! (deg min) WATER DEPTH : 30 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 5299 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 5299 conductivity ' ' 5299 Pressure ' ' 0464 $END $REMARKS SOFTWARE VERSION 1.53 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2008/08/01 15:15:17 937 937 HDREDIT2 2.5.1 2008/08/01 15:19:09 ? ? CLEAN 5.0.2 2008/08/01 16:16:13 ? ? ADTIMCH 4.3 2008/08/02 14:42:48 937 937 SHIFTDAT 3.4 2008/08/02 15:51:13 937 937 DELETE 6.3 2008/08/02 16:15:32 937 175 CLIP 1.3 2008/08/02 16:20:32 175 167 CTDEDIT 4.61 2008/08/02 17:10:10 167 166 BINAVE 4.1.1 2008/08/04 10:05:39 166 24 REMOVECH 8.0 2008/08/04 10:42:20 24 24 HDREDIT2 2.5.1 2008/08/04 10:46:59 ? ? $END $REMARKS -HEADER EDITS: 2008/08/01 15:19:09 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr Channel 2: Pressure [decibar] Units: dbars ==> decibar -CLEAN functions: 2008/08/01 16:15:58 20 Set event to last 4 characters of file name -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 13.50 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -CTDEDIT 2008/08/02 17:10:10 1 record was deleted in this editing session. No data values were changed. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/08/04 10:42:20 4 channels removed. -HEADER EDITS: 2008/08/04 10:46:59 Applied edit header: Q:\Cruise_Data_Processing\2008-22\Processing\doc\2008-22-hdr.txt $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\Walker Rock\My Documents\CTD data\2008\Ma y 28 2008\May 28 2008101.hex Software Version 1.53 Temperature SN = 5299 Conductivity SN = 5299 System UpLoad Time = Jun 18 2008 19:00:05 ds SeacatPlus V 1.6b SERIAL NO. 5299 18 Jun 2008 19:07:21 vbatt = 12.8, vlith = 8.5, ioper = 62.1 ma, ipump = 55.0 ma, status = not logging number of scans to average = 1 samples = 116016, free = 646584, casts = 110 mode = profile, minimum cond freq = 2900, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 870.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> SeacatPlus V 1.6b SERIAL NO. 5299 18 Jun 2008 19:07:50 temperature: 20-dec-07 TA0 = 1.239780e-03 TA1 = 2.568902e-04 TA2 = 2.939242e-07 TA3 = 1.275296e-07 TOFFSET = 0.000000e+00 conductivity: 20-dec-07 G = -9.996093e-01 H = 1.257222e-01 I = -3.921464e-04 J = 4.366159e-05 CF0 = 2.828559e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 2651408, range = 870 psia: 18-dec-07 PA0 = 1.855029e+00 PA1 = 2.644191e-03 PA2 = 2.397141e-11 PTCA0 = 5.240580e+05 PTCA1 = 5.275216e+01 PTCA2 = -8.601253e-01 PTCB0 = 2.543188e+01 PTCB1 = 7.750000e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -6.165396e+01 PTEMPA1 = 5.373011e+01 PTEMPA2 = -6.133162e-01 POFFSET = 0.000000e+00 volt 0: offset = -4.844105e-02, slope = 1.246264e+00 volt 1: offset = -4.821895e-02, slope = 1.246629e+00 volt 2: offset = -4.817895e-02, slope = 1.246666e+00 volt 3: offset = -4.868737e-02, slope = 1.247244e+00 EXTFREQSF = 1.000032e+00 dh cast 101 28 May 2008 14:33:33 samples 106646 to 107582, avg = 1, stop = mag sw itch S> # nquan = 7 # nvalues = 937 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 937 # span 1 = 0.179, 23.549 # span 2 = 7.8572, 13.1915 # span 3 = 0.189130, 3.238880 # span 4 = -0.581, 0.647 # span 5 = 1.2767, 31.0310 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = May 28 2008 14:33:33 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 5299, 20 Dec-07 # sensor 1 = Frequency 1 conductivity, 5299, 20-Dec-07, cpcor = -9.5700e-08 # sensor 2 = Pressure Number, 0464 # datcnv_date = Jul 28 2008 11:18:07, 7.18 # datcnv_in = Q:\Cruise_Data_Processing\2008-22\Processing\2008-22-0101.hex Q:\C ruise_Data_Processing\2008-22\Processing\doc\2008-22-ctd.con # datcnv_skipover = 0 # filter_date = Aug 01 2008 14:58:46, 7.18 # filter_in = Q:\Cruise_Data_Processing\2008-22\Processing\convert\2008-22-0101. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 1.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Aug 01 2008 15:11:59, 7.18 # Derive_in = Q:\Cruise_Data_Processing\2008-22\Processing\test\2008-22-0101.cnv Q:\Cruise_Data_Processing\2008-41\RAW\CTD\2008-41-0035.con # file_type = ascii END* CTDEDIT was used to remove 1 record from the top of the cast. ---------------------------------------------------------------------- There was no salinity calibration sampling and information available from previous uses was considered unreliable, so no recalibration has been applied to the salinity data. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05units in areas of high gradients. However, this cruise had large gradients only at the surface and the descent rate was generally very steady, so the errors should be much smaller than that. ---------------------------------------------------------------------- !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.2 12.9137 17.6062 4 2.0 12.7585 18.1800 10 3.0 11.5653 21.6913 8 4.0 9.3840 27.5621 7 5.0 8.5039 29.8559 8 6.0 8.2066 30.4580 7 6.9 8.1109 30.6295 8 7.9 8.0446 30.7346 7 9.0 8.0218 30.7667 8 9.9 8.0148 30.7814 6 10.9 7.9860 30.8327 8 12.0 7.9626 30.8710 7 12.9 7.9596 30.8746 6 13.9 7.9584 30.8754 7 15.0 7.9534 30.8817 7 15.9 7.9411 30.8996 7 16.9 7.9224 30.9261 7 17.9 7.9063 30.9516 7 19.0 7.8884 30.9789 7 20.0 7.8788 30.9937 6 20.9 7.8752 30.9999 7 21.9 7.8693 31.0094 7 23.0 7.8586 31.0271 9 23.5 7.8653 31.0269 1