*2008/08/04 10:46:58.78 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/05/28 16:45:20.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 33 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 69E3D9B0 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.2 32.9 2 Temperature 'deg C (ITS90)' 7.694722 13.17858 3 Salinity:T0:C0 PSS-78 16.89862 30.95417 4 Number_of_bin_records n/a 5 9 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-22\Pro $END *ADMINISTRATION MISSION : 2008-22 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Sea Lice Monitoring SCIENTIST : Hargreaves B. PLATFORM : Franciscan NO 1 *LOCATION GEOGRAPHIC AREA : Broughton Archipelago STATION : GILFORD BAY EVENT NUMBER : 95 LATITUDE : 50 39.38700 N ! (deg min) LONGITUDE : 126 22.91300 W ! (deg min) WATER DEPTH : 35 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 5299 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 5299 conductivity ' ' 5299 Pressure ' ' 0464 $END $REMARKS SOFTWARE VERSION 1.53 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2008/08/01 15:15:15 964 964 HDREDIT2 2.5.1 2008/08/01 15:19:08 ? ? CLEAN 5.0.2 2008/08/01 16:16:12 ? ? ADTIMCH 4.3 2008/08/02 14:42:47 964 964 SHIFTDAT 3.4 2008/08/02 15:51:12 964 964 DELETE 6.3 2008/08/02 16:15:31 964 217 CLIP 1.3 2008/08/02 16:20:31 217 209 BINAVE 4.1.1 2008/08/04 10:05:38 209 33 REMOVECH 8.0 2008/08/04 10:42:19 33 33 HDREDIT2 2.5.1 2008/08/04 10:46:58 ? ? $END $REMARKS -HEADER EDITS: 2008/08/01 15:19:08 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr Channel 2: Pressure [decibar] Units: dbars ==> decibar -CLEAN functions: 2008/08/01 16:15:58 20 Set event to last 4 characters of file name -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 23.30 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/08/04 10:42:19 4 channels removed. -HEADER EDITS: 2008/08/04 10:46:58 Applied edit header: Q:\Cruise_Data_Processing\2008-22\Processing\doc\2008-22-hdr.txt $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\Walker Rock\My Documents\CTD data\2008\Ma y 28 2008\May 28 2008095.hex Software Version 1.53 Temperature SN = 5299 Conductivity SN = 5299 System UpLoad Time = Jun 18 2008 18:56:51 ds SeacatPlus V 1.6b SERIAL NO. 5299 18 Jun 2008 19:07:21 vbatt = 12.8, vlith = 8.5, ioper = 62.1 ma, ipump = 55.0 ma, status = not logging number of scans to average = 1 samples = 116016, free = 646584, casts = 110 mode = profile, minimum cond freq = 2900, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 870.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> SeacatPlus V 1.6b SERIAL NO. 5299 18 Jun 2008 19:07:50 temperature: 20-dec-07 TA0 = 1.239780e-03 TA1 = 2.568902e-04 TA2 = 2.939242e-07 TA3 = 1.275296e-07 TOFFSET = 0.000000e+00 conductivity: 20-dec-07 G = -9.996093e-01 H = 1.257222e-01 I = -3.921464e-04 J = 4.366159e-05 CF0 = 2.828559e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 2651408, range = 870 psia: 18-dec-07 PA0 = 1.855029e+00 PA1 = 2.644191e-03 PA2 = 2.397141e-11 PTCA0 = 5.240580e+05 PTCA1 = 5.275216e+01 PTCA2 = -8.601253e-01 PTCB0 = 2.543188e+01 PTCB1 = 7.750000e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -6.165396e+01 PTEMPA1 = 5.373011e+01 PTEMPA2 = -6.133162e-01 POFFSET = 0.000000e+00 volt 0: offset = -4.844105e-02, slope = 1.246264e+00 volt 1: offset = -4.821895e-02, slope = 1.246629e+00 volt 2: offset = -4.817895e-02, slope = 1.246666e+00 volt 3: offset = -4.868737e-02, slope = 1.247244e+00 EXTFREQSF = 1.000032e+00 dh cast 95 28 May 2008 09:45:20 samples 101074 to 102037, avg = 1, stop = mag sw itch S> # nquan = 7 # nvalues = 964 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 964 # span 1 = 0.177, 33.331 # span 2 = 7.6935, 13.2474 # span 3 = 0.498132, 3.218837 # span 4 = -0.539, 0.763 # span 5 = 3.5627, 30.9666 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = May 28 2008 09:45:20 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 5299, 20 Dec-07 # sensor 1 = Frequency 1 conductivity, 5299, 20-Dec-07, cpcor = -9.5700e-08 # sensor 2 = Pressure Number, 0464 # datcnv_date = Jul 28 2008 11:18:06, 7.18 # datcnv_in = Q:\Cruise_Data_Processing\2008-22\Processing\2008-22-0095.hex Q:\C ruise_Data_Processing\2008-22\Processing\doc\2008-22-ctd.con # datcnv_skipover = 0 # filter_date = Aug 01 2008 14:58:45, 7.18 # filter_in = Q:\Cruise_Data_Processing\2008-22\Processing\convert\2008-22-0095. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 1.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Aug 01 2008 15:11:59, 7.18 # Derive_in = Q:\Cruise_Data_Processing\2008-22\Processing\test\2008-22-0095.cnv Q:\Cruise_Data_Processing\2008-41\RAW\CTD\2008-41-0035.con # file_type = ascii END* ---------------------------------------------------------------------- There was no salinity calibration sampling and information available from previous uses was considered unreliable, so no recalibration has been applied to the salinity data. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05units in areas of high gradients. However, this cruise had large gradients only at the surface and the descent rate was generally very steady, so the errors should be much smaller than that. ---------------------------------------------------------------------- !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.2 13.1786 16.8986 5 2.0 13.1301 17.2199 7 3.0 12.2792 19.6896 6 4.0 10.7769 23.7699 6 5.0 9.7724 26.6263 6 6.0 9.3850 27.7993 6 7.0 9.3274 28.0128 5 7.9 9.2737 28.2056 6 9.0 8.9532 28.8960 6 9.9 8.7031 29.4298 6 10.9 8.5939 29.5933 6 12.0 8.5180 29.8368 7 13.0 8.2970 30.2365 6 14.0 7.9523 30.5880 6 15.0 7.8838 30.6327 6 16.0 7.8123 30.7005 6 17.0 7.7774 30.7509 5 17.9 7.7415 30.8014 6 19.0 7.7273 30.8224 6 20.0 7.7215 30.8314 6 21.0 7.7211 30.8354 6 22.0 7.7212 30.8340 6 23.0 7.7200 30.8358 6 23.9 7.7146 30.8450 6 24.9 7.7106 30.8562 7 25.9 7.7126 30.8602 9 26.9 7.7069 30.8730 7 27.9 7.7006 30.8930 6 28.9 7.6985 30.9019 7 30.0 7.6979 30.9057 7 31.0 7.6982 30.9057 7 32.0 7.6969 30.9172 7 32.9 7.6947 30.9542 9