*2008/08/04 10:46:58.56 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/05/28 00:07:17.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 26 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : A7362CE5 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.2 25.8 2 Temperature 'deg C (ITS90)' 7.637986 13.4426 3 Salinity:T0:C0 PSS-78 13.88448 30.81161 4 Number_of_bin_records n/a 5 8 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-22\Pro $END *ADMINISTRATION MISSION : 2008-22 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Sea Lice Monitoring SCIENTIST : Hargreaves B. PLATFORM : Franciscan NO 1 *LOCATION GEOGRAPHIC AREA : Broughton Archipelago STATION : SHEWELL ISL EVENT NUMBER : 90 LATITUDE : 50 39.50700 N ! (deg min) LONGITUDE : 126 14.80100 W ! (deg min) WATER DEPTH : 30 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 5299 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 5299 conductivity ' ' 5299 Pressure ' ' 0464 $END $REMARKS SOFTWARE VERSION 1.53 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2008/08/01 15:15:14 950 950 HDREDIT2 2.5.1 2008/08/01 15:19:07 ? ? CLEAN 5.0.2 2008/08/01 16:16:12 ? ? ADTIMCH 4.3 2008/08/02 14:42:45 950 950 SHIFTDAT 3.4 2008/08/02 15:51:11 950 950 DELETE 6.3 2008/08/02 16:15:30 950 159 CLIP 1.3 2008/08/02 16:20:31 159 151 BINAVE 4.1.1 2008/08/04 10:05:38 151 26 REMOVECH 8.0 2008/08/04 10:42:19 26 26 HDREDIT2 2.5.1 2008/08/04 10:46:58 ? ? $END $REMARKS -HEADER EDITS: 2008/08/01 15:19:07 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr Channel 2: Pressure [decibar] Units: dbars ==> decibar -CLEAN functions: 2008/08/01 16:15:58 20 Set event to last 4 characters of file name -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 16.10 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/08/04 10:42:19 4 channels removed. -HEADER EDITS: 2008/08/04 10:46:58 Applied edit header: Q:\Cruise_Data_Processing\2008-22\Processing\doc\2008-22-hdr.txt $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\Walker Rock\My Documents\CTD data\2008\Ma y 27 2008\May 27 2008090.hex Software Version 1.53 Temperature SN = 5299 Conductivity SN = 5299 System UpLoad Time = May 27 2008 19:38:25 ds SeacatPlus V 1.6b SERIAL NO. 5299 27 May 2008 19:44:40 vbatt = 12.7, vlith = 8.6, ioper = 62.0 ma, ipump = 55.4 ma, status = not logging number of scans to average = 1 samples = 96960, free = 665640, casts = 90 mode = profile, minimum cond freq = 2900, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 870.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> SeacatPlus V 1.6b SERIAL NO. 5299 27 May 2008 19:45:02 temperature: 20-dec-07 TA0 = 1.239780e-03 TA1 = 2.568902e-04 TA2 = 2.939242e-07 TA3 = 1.275296e-07 TOFFSET = 0.000000e+00 conductivity: 20-dec-07 G = -9.996093e-01 H = 1.257222e-01 I = -3.921464e-04 J = 4.366159e-05 CF0 = 2.828559e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 2651408, range = 870 psia: 18-dec-07 PA0 = 1.855029e+00 PA1 = 2.644191e-03 PA2 = 2.397141e-11 PTCA0 = 5.240580e+05 PTCA1 = 5.275216e+01 PTCA2 = -8.601253e-01 PTCB0 = 2.543188e+01 PTCB1 = 7.750000e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -6.165396e+01 PTEMPA1 = 5.373011e+01 PTEMPA2 = -6.133162e-01 POFFSET = 0.000000e+00 volt 0: offset = -4.844105e-02, slope = 1.246264e+00 volt 1: offset = -4.821895e-02, slope = 1.246629e+00 volt 2: offset = -4.817895e-02, slope = 1.246666e+00 volt 3: offset = -4.868737e-02, slope = 1.247244e+00 EXTFREQSF = 1.000032e+00 dh cast 90 27 May 2008 17:07:17 samples 96011 to 96960, avg = 1, stop = mag swit ch S> # nquan = 7 # nvalues = 950 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 950 # span 1 = 0.211, 26.055 # span 2 = 7.6324, 16.7970 # span 3 = 0.140337, 3.200116 # span 4 = -0.596, 0.825 # span 5 = 0.8456, 30.8228 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = May 27 2008 17:07:17 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 5299, 20 Dec-07 # sensor 1 = Frequency 1 conductivity, 5299, 20-Dec-07, cpcor = -9.5700e-08 # sensor 2 = Pressure Number, 0464 # datcnv_date = Jul 28 2008 11:18:06, 7.18 # datcnv_in = Q:\Cruise_Data_Processing\2008-22\Processing\2008-22-0090.hex Q:\C ruise_Data_Processing\2008-22\Processing\doc\2008-22-ctd.con # datcnv_skipover = 0 # filter_date = Aug 01 2008 14:58:45, 7.18 # filter_in = Q:\Cruise_Data_Processing\2008-22\Processing\convert\2008-22-0090. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 1.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Aug 01 2008 15:11:58, 7.18 # Derive_in = Q:\Cruise_Data_Processing\2008-22\Processing\test\2008-22-0090.cnv Q:\Cruise_Data_Processing\2008-41\RAW\CTD\2008-41-0035.con # file_type = ascii END* ---------------------------------------------------------------------- There was no salinity calibration sampling and information available from previous uses was considered unreliable, so no recalibration has been applied to the salinity data. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05units in areas of high gradients. However, this cruise had large gradients only at the surface and the descent rate was generally very steady, so the errors should be much smaller than that. ---------------------------------------------------------------------- !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.2 13.4426 13.8845 5 2.0 13.4378 13.9073 8 3.0 13.3763 14.1371 6 3.9 12.9658 15.5946 6 4.9 10.8834 22.1190 6 5.9 9.6136 26.6238 7 6.9 8.8953 28.5056 6 8.0 8.7233 28.9113 6 9.0 8.5382 29.2525 5 9.9 8.3563 29.5641 5 10.9 8.0940 29.9843 5 11.9 7.9841 30.1658 6 12.9 7.9690 30.1981 5 13.9 7.9141 30.2819 6 15.0 7.8815 30.3415 6 16.0 7.8433 30.4118 5 16.9 7.7920 30.4951 6 17.9 7.7730 30.5249 5 18.9 7.7741 30.5256 6 19.9 7.7595 30.5490 5 20.9 7.7379 30.5828 6 22.0 7.7235 30.6120 5 23.0 7.6960 30.6652 6 24.0 7.6892 30.6861 5 25.0 7.6640 30.7414 7 25.8 7.6380 30.8116 7