*2008/08/04 10:46:55.59 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/05/23 15:12:52.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 30 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 5C4542BA NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.3 29.6 2 Temperature 'deg C (ITS90)' 8.0059 8.874333 3 Salinity:T0:C0 PSS-78 28.85517 31.25387 4 Number_of_bin_records n/a 3 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-22\Pro $END *ADMINISTRATION MISSION : 2008-22 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Sea Lice Monitoring SCIENTIST : Hargreaves B. PLATFORM : Franciscan NO 1 *LOCATION GEOGRAPHIC AREA : Broughton Archipelago STATION : DUFF PT (P) EVENT NUMBER : 29 LATITUDE : 50 45.60300 N ! (deg min) LONGITUDE : 126 42.19900 W ! (deg min) WATER DEPTH : 35 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 5299 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 5299 conductivity ' ' 5299 Pressure ' ' 0464 $END $REMARKS SOFTWARE VERSION 1.53 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2008/08/01 15:14:57 1051 1051 HDREDIT2 2.5.1 2008/08/01 15:18:55 ? ? CLEAN 5.0.2 2008/08/01 16:16:00 ? ? ADTIMCH 4.3 2008/08/02 14:42:28 1051 1051 SHIFTDAT 3.4 2008/08/02 15:51:00 1051 1051 DELETE 6.3 2008/08/02 16:15:15 1051 213 CLIP 1.3 2008/08/02 16:20:26 213 204 CTDEDIT 4.61 2008/08/02 17:01:52 204 202 BINAVE 4.1.1 2008/08/04 10:05:31 202 30 REMOVECH 8.0 2008/08/04 10:42:14 30 30 HDREDIT2 2.5.1 2008/08/04 10:46:55 ? ? $END $REMARKS -HEADER EDITS: 2008/08/01 15:18:55 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr Channel 2: Pressure [decibar] Units: dbars ==> decibar -CLEAN functions: 2008/08/01 16:15:58 20 Set event to last 4 characters of file name -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 19.70 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -CTDEDIT 2008/08/02 17:01:52 2 records were deleted in this editing session. No data values were changed. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/08/04 10:42:14 4 channels removed. -HEADER EDITS: 2008/08/04 10:46:55 Applied edit header: Q:\Cruise_Data_Processing\2008-22\Processing\doc\2008-22-hdr.txt $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\Walker Rock\My Documents\CTD data\2008\Ma y 23 2008\May 23 2008029.hex Software Version 1.53 Temperature SN = 5299 Conductivity SN = 5299 System UpLoad Time = May 23 2008 17:27:24 ds SeacatPlus V 1.6b SERIAL NO. 5299 23 May 2008 17:38:01 vbatt = 13.1, vlith = 8.5, ioper = 62.0 ma, ipump = 66.0 ma, status = not logging number of scans to average = 1 samples = 43567, free = 719033, casts = 41 mode = profile, minimum cond freq = 2900, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 870.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> SeacatPlus V 1.6b SERIAL NO. 5299 23 May 2008 17:38:53 temperature: 20-dec-07 TA0 = 1.239780e-03 TA1 = 2.568902e-04 TA2 = 2.939242e-07 TA3 = 1.275296e-07 TOFFSET = 0.000000e+00 conductivity: 20-dec-07 G = -9.996093e-01 H = 1.257222e-01 I = -3.921464e-04 J = 4.366159e-05 CF0 = 2.828559e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 2651408, range = 870 psia: 18-dec-07 PA0 = 1.855029e+00 PA1 = 2.644191e-03 PA2 = 2.397141e-11 PTCA0 = 5.240580e+05 PTCA1 = 5.275216e+01 PTCA2 = -8.601253e-01 PTCB0 = 2.543188e+01 PTCB1 = 7.750000e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -6.165396e+01 PTEMPA1 = 5.373011e+01 PTEMPA2 = -6.133162e-01 POFFSET = 0.000000e+00 volt 0: offset = -4.844105e-02, slope = 1.246264e+00 volt 1: offset = -4.821895e-02, slope = 1.246629e+00 volt 2: offset = -4.817895e-02, slope = 1.246666e+00 volt 3: offset = -4.868737e-02, slope = 1.247244e+00 EXTFREQSF = 1.000032e+00 dh cast 29 23 May 2008 08:12:52 samples 29634 to 30684, avg = 1, stop = mag swit ch S> # nquan = 7 # nvalues = 1051 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 1051 # span 1 = 0.095, 29.669 # span 2 = 8.0049, 9.0917 # span 3 = 0.002473, 3.272031 # span 4 = -0.695, 0.706 # span 5 = 0.0184, 31.2546 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = May 23 2008 08:12:52 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 5299, 20 Dec-07 # sensor 1 = Frequency 1 conductivity, 5299, 20-Dec-07, cpcor = -9.5700e-08 # sensor 2 = Pressure Number, 0464 # datcnv_date = Jul 28 2008 11:17:59, 7.18 # datcnv_in = Q:\Cruise_Data_Processing\2008-22\Processing\2008-22-0029.hex Q:\C ruise_Data_Processing\2008-22\Processing\doc\2008-22-ctd.con # datcnv_skipover = 0 # filter_date = Aug 01 2008 14:58:36, 7.18 # filter_in = Q:\Cruise_Data_Processing\2008-22\Processing\convert\2008-22-0029. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 1.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Aug 01 2008 15:11:51, 7.18 # Derive_in = Q:\Cruise_Data_Processing\2008-22\Processing\test\2008-22-0029.cnv Q:\Cruise_Data_Processing\2008-41\RAW\CTD\2008-41-0035.con # file_type = ascii END* CTDEDIT was used to remove 2 records from the top of the cast. ---------------------------------------------------------------------- There was no salinity calibration sampling and information available from previous uses was considered unreliable, so no recalibration has been applied to the salinity data. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05units in areas of high gradients. However, this cruise had large gradients only at the surface and the descent rate was generally very steady, so the errors should be much smaller than that. ---------------------------------------------------------------------- !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.3 8.8743 28.8552 3 1.9 8.7844 29.0967 7 2.9 8.7627 29.1750 7 4.0 8.7030 29.3380 6 5.0 8.7332 29.3006 6 5.9 8.6016 29.7189 7 7.0 8.5462 29.9703 7 8.0 8.5379 30.0090 7 8.9 8.5384 30.0031 6 9.9 8.5283 30.0353 7 10.9 8.5250 30.0615 7 11.9 8.4671 30.2578 7 13.0 8.1577 30.9511 7 13.9 8.0601 31.1847 6 14.9 8.0550 31.1955 7 15.9 8.0514 31.1994 6 16.9 8.0495 31.2017 7 18.0 8.0396 31.2135 7 18.9 8.0333 31.2220 8 20.0 8.0269 31.2295 6 21.0 8.0216 31.2351 8 22.0 8.0224 31.2338 7 23.0 8.0199 31.2370 6 23.9 8.0186 31.2382 7 24.9 8.0177 31.2393 7 25.9 8.0112 31.2474 8 27.0 8.0070 31.2526 8 28.0 8.0059 31.2539 7 29.0 8.0128 31.2455 10 29.6 8.0186 31.2392 3