*2008/08/04 10:46:54.40 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/05/21 20:32:26.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 24 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : F61CDFE6 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.3 23.9 2 Temperature 'deg C (ITS90)' 8.099956 9.7699 3 Salinity:T0:C0 PSS-78 25.65673 30.59853 4 Number_of_bin_records n/a 3 9 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-22\Pro $END *ADMINISTRATION MISSION : 2008-22 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Sea Lice Monitoring SCIENTIST : Hargreaves B. PLATFORM : Franciscan NO 1 *LOCATION GEOGRAPHIC AREA : Broughton Archipelago STATION : KINAIRD ISL EVENT NUMBER : 10 LATITUDE : 50 54.79600 N ! (deg min) LONGITUDE : 126 51.06200 W ! (deg min) WATER DEPTH : 25 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 5299 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 5299 conductivity ' ' 5299 Pressure ' ' 0464 $END $REMARKS SOFTWARE VERSION 1.53 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2008/08/01 15:14:52 876 876 HDREDIT2 2.5.1 2008/08/01 15:18:52 ? ? CLEAN 5.0.2 2008/08/01 15:30:59 ? ? ADTIMCH 4.3 2008/08/02 14:42:24 876 876 SHIFTDAT 3.4 2008/08/02 15:50:56 876 876 DELETE 6.3 2008/08/02 16:15:11 876 172 CLIP 1.3 2008/08/02 16:20:24 172 168 CTDEDIT 4.61 2008/08/02 16:50:49 168 166 BINAVE 4.1.1 2008/08/04 10:05:29 166 24 REMOVECH 8.0 2008/08/04 10:42:13 24 24 HDREDIT2 2.5.1 2008/08/04 10:46:54 ? ? $END $REMARKS -HEADER EDITS: 2008/08/01 15:18:52 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr Channel 2: Pressure [decibar] Units: dbars ==> decibar -CLEAN functions: 2008/08/01 15:30:57 20 Set event to last 4 characters of file name -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 14.30 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -CTDEDIT 2008/08/02 16:50:49 2 records were deleted in this editing session. 2 changes in channel Salinity:T0:C0 -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/08/04 10:42:13 4 channels removed. -HEADER EDITS: 2008/08/04 10:46:54 Applied edit header: Q:\Cruise_Data_Processing\2008-22\Processing\doc\2008-22-hdr.txt $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\Walker Rock\My Documents\CTD data\2008\Ma y 21 2008\May 21 2008010.hex Software Version 1.53 Temperature SN = 5299 Conductivity SN = 5299 System UpLoad Time = May 21 2008 18:34:51 ds SeacatPlus V 1.6b SERIAL NO. 5299 21 May 2008 18:42:55 vbatt = 13.7, vlith = 8.3, ioper = 62.1 ma, ipump = 50.0 ma, status = not logging number of scans to average = 1 samples = 14444, free = 748156, casts = 13 mode = profile, minimum cond freq = 2900, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 870.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> SeacatPlus V 1.6b SERIAL NO. 5299 21 May 2008 18:43:26 temperature: 20-dec-07 TA0 = 1.239780e-03 TA1 = 2.568902e-04 TA2 = 2.939242e-07 TA3 = 1.275296e-07 TOFFSET = 0.000000e+00 conductivity: 20-dec-07 G = -9.996093e-01 H = 1.257222e-01 I = -3.921464e-04 J = 4.366159e-05 CF0 = 2.828559e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 2651408, range = 870 psia: 18-dec-07 PA0 = 1.855029e+00 PA1 = 2.644191e-03 PA2 = 2.397141e-11 PTCA0 = 5.240580e+05 PTCA1 = 5.275216e+01 PTCA2 = -8.601253e-01 PTCB0 = 2.543188e+01 PTCB1 = 7.750000e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -6.165396e+01 PTEMPA1 = 5.373011e+01 PTEMPA2 = -6.133162e-01 POFFSET = 0.000000e+00 volt 0: offset = -4.844105e-02, slope = 1.246264e+00 volt 1: offset = -4.821895e-02, slope = 1.246629e+00 volt 2: offset = -4.817895e-02, slope = 1.246666e+00 volt 3: offset = -4.868737e-02, slope = 1.247244e+00 EXTFREQSF = 1.000032e+00 dh cast 10 21 May 2008 13:32:26 samples 10145 to 11020, avg = 1, stop = mag swit ch S> # nquan = 7 # nvalues = 876 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 876 # span 1 = 0.184, 24.253 # span 2 = 8.0990, 10.1853 # span 3 = 0.138124, 3.217921 # span 4 = -0.623, 0.711 # span 5 = 0.9902, 30.5999 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = May 21 2008 13:32:26 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 5299, 20 Dec-07 # sensor 1 = Frequency 1 conductivity, 5299, 20-Dec-07, cpcor = -9.5700e-08 # sensor 2 = Pressure Number, 0464 # datcnv_date = Jul 28 2008 11:17:57, 7.18 # datcnv_in = Q:\Cruise_Data_Processing\2008-22\Processing\2008-22-0010.hex Q:\C ruise_Data_Processing\2008-22\Processing\doc\2008-22-ctd.con # datcnv_skipover = 0 # filter_date = Aug 01 2008 14:58:34, 7.18 # filter_in = Q:\Cruise_Data_Processing\2008-22\Processing\convert\2008-22-0010. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 1.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Aug 01 2008 15:11:48, 7.18 # Derive_in = Q:\Cruise_Data_Processing\2008-22\Processing\test\2008-22-0010.cnv Q:\Cruise_Data_Processing\2008-41\RAW\CTD\2008-41-0035.con # file_type = ascii END* CTDEDIT was used to remove 2 records from the top of the cast and to clean salinity very lightly. ---------------------------------------------------------------------- There was no salinity calibration sampling and information available from previous uses was considered unreliable, so no recalibration has been applied to the salinity data. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05units in areas of high gradients. However, this cruise had large gradients only at the surface and the descent rate was generally very steady, so the errors should be much smaller than that. ---------------------------------------------------------------------- !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.3 9.7699 25.6567 3 1.9 9.4826 26.7277 9 2.9 8.9984 28.2735 7 3.9 8.7856 28.9927 7 5.0 8.7017 29.2480 7 5.9 8.6307 29.4293 7 7.0 8.6131 29.4986 7 8.0 8.5079 29.7859 7 8.9 8.4409 29.9890 6 9.9 8.3447 30.1639 7 11.0 8.2293 30.3543 7 11.9 8.2134 30.3863 6 12.9 8.2086 30.3952 7 13.9 8.2078 30.3977 7 14.9 8.1898 30.4316 8 15.9 8.1718 30.4648 7 16.9 8.1435 30.5163 7 17.9 8.1237 30.5523 7 19.0 8.1196 30.5610 8 20.0 8.1167 30.5667 7 21.0 8.1112 30.5768 6 21.9 8.1042 30.5887 6 22.9 8.1015 30.5943 7 23.9 8.1000 30.5985 9