*2008/08/04 10:46:53.75 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/05/21 14:26:16.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 32 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 7E195236 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.2 31.85 2 Temperature 'deg C (ITS90)' 8.058662 9.01762 3 Salinity:T0:C0 PSS-78 27.8865 30.86123 4 Number_of_bin_records n/a 5 9 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-22\Pro $END *ADMINISTRATION MISSION : 2008-22 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Sea Lice Monitoring SCIENTIST : Hargreaves B. PLATFORM : Franciscan NO 1 *LOCATION GEOGRAPHIC AREA : Broughton Archipelago STATION : Popplewell Pt. B.S. EVENT NUMBER : 1 LATITUDE : 50 50.89500 N ! (deg min) LONGITUDE : 126 56.93400 W ! (deg min) WATER DEPTH : 30 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 5299 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 5299 conductivity ' ' 5299 Pressure ' ' 0464 $END $REMARKS SOFTWARE VERSION 1.53 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2008/08/01 15:14:50 1306 1306 HDREDIT2 2.5.1 2008/08/01 15:18:50 ? ? CLEAN 5.0.2 2008/08/01 15:30:57 ? ? ADTIMCH 4.3 2008/08/02 14:42:22 1306 1306 SHIFTDAT 3.4 2008/08/02 15:50:55 1306 1306 DELETE 6.3 2008/08/02 16:15:09 1306 257 CLIP 1.3 2008/08/02 16:20:23 257 248 BINAVE 4.1.1 2008/08/04 10:05:28 248 32 REMOVECH 8.0 2008/08/04 10:42:13 32 32 HDREDIT2 2.5.1 2008/08/04 10:46:53 ? ? $END $REMARKS -HEADER EDITS: 2008/08/01 15:18:50 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr Channel 2: Pressure [decibar] Units: dbars ==> decibar -CLEAN functions: 2008/08/01 15:30:57 Set event to last 4 characters of file name -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 22.20 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following CLIP parameters were used. Clip by Channel Range Clip Channel: Pressure Min,Max = 1.000, 5000.000 Time Not Available in File -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/08/04 10:42:13 4 channels removed. -HEADER EDITS: 2008/08/04 10:46:53 Applied edit header: Q:\Cruise_Data_Processing\2008-22\Processing\doc\2008-22-hdr.txt $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Documents and Settings\Walker Rock\My Documents\CTD data\2008\Ma y 21 2008\May 21 2008001.hex Software Version 1.53 Temperature SN = 5299 Conductivity SN = 5299 System UpLoad Time = May 21 2008 07:33:45 ds SeacatPlus V 1.6b SERIAL NO. 5299 21 May 2008 07:46:16 vbatt = 13.9, vlith = 8.3, ioper = 62.0 ma, ipump = 57.1 ma, status = not logging number of scans to average = 1 samples = 2538, free = 760062, casts = 2 mode = profile, minimum cond freq = 2900, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 870.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> SeacatPlus V 1.6b SERIAL NO. 5299 21 May 2008 07:46:35 temperature: 20-dec-07 TA0 = 1.239780e-03 TA1 = 2.568902e-04 TA2 = 2.939242e-07 TA3 = 1.275296e-07 TOFFSET = 0.000000e+00 conductivity: 20-dec-07 G = -9.996093e-01 H = 1.257222e-01 I = -3.921464e-04 J = 4.366159e-05 CF0 = 2.828559e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 2651408, range = 870 psia: 18-dec-07 PA0 = 1.855029e+00 PA1 = 2.644191e-03 PA2 = 2.397141e-11 PTCA0 = 5.240580e+05 PTCA1 = 5.275216e+01 PTCA2 = -8.601253e-01 PTCB0 = 2.543188e+01 PTCB1 = 7.750000e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -6.165396e+01 PTEMPA1 = 5.373011e+01 PTEMPA2 = -6.133162e-01 POFFSET = 0.000000e+00 volt 0: offset = -4.844105e-02, slope = 1.246264e+00 volt 1: offset = -4.821895e-02, slope = 1.246629e+00 volt 2: offset = -4.817895e-02, slope = 1.246666e+00 volt 3: offset = -4.868737e-02, slope = 1.247244e+00 EXTFREQSF = 1.000032e+00 dh cast 1 21 May 2008 07:26:16 samples 1 to 1306, avg = 1, stop = mag switch S> # nquan = 7 # nvalues = 1306 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 1306 # span 1 = 0.095, 32.197 # span 2 = 8.0586, 9.1488 # span 3 = 0.000306, 3.239375 # span 4 = -0.642, 0.600 # span 5 = 0.0054, 30.8616 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = May 21 2008 07:26:16 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 5299, 20 Dec-07 # sensor 1 = Frequency 1 conductivity, 5299, 20-Dec-07, cpcor = -9.5700e-08 # sensor 2 = Pressure Number, 0464 # datcnv_date = Jul 28 2008 11:17:56, 7.18 # datcnv_in = Q:\Cruise_Data_Processing\2008-22\Processing\2008-22-0001.hex Q:\C ruise_Data_Processing\2008-22\Processing\doc\2008-22-ctd.con # datcnv_skipover = 0 # filter_date = Aug 01 2008 14:58:33, 7.18 # filter_in = Q:\Cruise_Data_Processing\2008-22\Processing\convert\2008-22-0001. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 1.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Aug 01 2008 15:11:47, 7.18 # Derive_in = Q:\Cruise_Data_Processing\2008-22\Processing\test\2008-22-0001.cnv Q:\Cruise_Data_Processing\2008-41\RAW\CTD\2008-41-0035.con # file_type = ascii END* ---------------------------------------------------------------------- There was no salinity calibration sampling and information available from previous uses was considered unreliable, so no recalibration has been applied to the salinity data. SeaCat salinity is prone to error due to mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. These errors are likely to be much larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05units in areas of high gradients. However, this cruise had large gradients only at the surface and the descent rate was generally very steady, so the errors should be much smaller than that. ---------------------------------------------------------------------- !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.2 9.0176 27.8865 5 1.9 9.0003 27.9670 9 3.0 8.8731 28.3719 8 4.0 8.7470 28.8015 7 5.0 8.5551 29.4312 8 6.0 8.4931 29.6605 7 7.0 8.4751 29.7255 7 8.0 8.3993 29.9250 7 9.0 8.3520 30.0627 8 9.9 8.2852 30.2423 7 10.9 8.2427 30.3714 8 12.0 8.2339 30.4113 8 13.0 8.1594 30.6090 8 14.0 8.0860 30.7808 8 15.0 8.0883 30.7790 8 16.0 8.0912 30.7696 8 17.0 8.0784 30.8052 8 18.0 8.0699 30.8291 8 19.0 8.0749 30.8197 8 20.0 8.0843 30.7985 8 21.0 8.0764 30.8168 8 22.0 8.0700 30.8315 9 22.9 8.0701 30.8310 8 24.0 8.0660 30.8387 8 24.9 8.0661 30.8406 7 25.9 8.0648 30.8452 8 26.9 8.0641 30.8475 7 27.9 8.0624 30.8510 8 29.0 8.0611 30.8540 8 30.0 8.0597 30.8581 8 31.0 8.0587 30.8612 8 31.9 8.0590 30.8612 8