*2008/05/23 13:37:26.89 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/02/28 17:07:15.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 32 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 37EB2663 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.3 31.55 2 Temperature 'deg C (ITS90)' 6.124733 7.08145 3 Salinity:T0:C0 PSS-78 26.1273 30.5335 4 Number_of_bin_records n/a 2 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-13\Pro $END *ADMINISTRATION MISSION : 2008-13 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Broughton Salmon and Sea Lice SCIENTIST : Galbraith M. PLATFORM : Princeton *LOCATION GEOGRAPHIC AREA : Broughton Archipelago & Knight Inlet STATION : MAC PT EVENT NUMBER : 44 LATITUDE : 50 41.24700 N ! (deg min) LONGITUDE : 125 44.20500 W ! (deg min) WATER DEPTH : 34 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 5299 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 5299 conductivity ' ' 5299 Pressure ' ' 63507 $END $REMARKS SOFTWARE VERSION 1.59 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2008/03/18 15:29:20 1005 1005 HDREDIT2 2.5.1 2008/03/18 15:32:43 ? ? ADTIMCH 4.3 2008/05/14 16:28:39 1005 1005 SHIFTDAT 3.4 2008/05/16 11:49:15 1005 1005 CLIP 1.3 2008/05/16 11:50:04 1005 806 DELETE 6.3 2008/05/16 11:50:21 806 208 CTDEDIT 4.61 2008/05/16 15:35:54 208 206 BINAVE 4.1.1 2008/05/16 16:04:49 206 32 REMOVECH 8.0 2008/05/23 13:34:08 32 32 HDREDIT2 2.5.1 2008/05/23 13:37:26 ? ? $END $REMARKS -HEADER EDITS: 2008/03/18 15:32:43 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr Channel 2: Pressure [decibar] Units: dbars ==> decibar -The following ADTIMCH parameters were used. Add 8.00 hours to times in header file section -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 200, 40000 Time Not Available in File -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 21.80 dbars Sample interval (from FILE section of header) = 0.250 seconds. -CTDEDIT 2008/05/16 15:35:54 2 records were deleted in this editing session. No data values were changed. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/05/23 13:34:08 4 channels removed. -HEADER EDITS: 2008/05/23 13:37:26 Applied edit header: Q:\Cruise_Data_Processing\2008-13\Processing\doc\header.txt $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\2008-09 Broughton\CTD Data\Raw Data\CTD.HEX\Broughton2008-13028. hex Software Version 1.59 Temperature SN = 5299 Conductivity SN = 5299 System UpLoad Time = Feb 29 2008 15:10:34 MacPt consec#044 50 41.247 125 44.205 30m ds SeacatPlus V 1.6b SERIAL NO. 5299 29 Feb 2008 14:40:45 vbatt = 12.7, vlith = 8.4, ioper = 62.0 ma, ipump = 68.3 ma, status = not logging number of scans to average = 1 samples = 76151, free = 686449, casts = 42 mode = profile, minimum cond freq = 2900, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 870.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> SeacatPlus V 1.6b SERIAL NO. 5299 29 Feb 2008 14:40:55 temperature: 20-dec-07 TA0 = 1.239780e-03 TA1 = 2.568902e-04 TA2 = 2.939242e-07 TA3 = 1.275296e-07 TOFFSET = 0.000000e+00 conductivity: 20-dec-07 G = -9.996093e-01 H = 1.257222e-01 I = -3.921464e-04 J = 4.366159e-05 CF0 = 2.828559e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 2651408, range = 870 psia: 18-dec-07 PA0 = 1.855029e+00 PA1 = 2.644191e-03 PA2 = 2.397141e-11 PTCA0 = 5.240580e+05 PTCA1 = 5.275216e+01 PTCA2 = -8.601253e-01 PTCB0 = 2.543188e+01 PTCB1 = 7.750000e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -6.165396e+01 PTEMPA1 = 5.373011e+01 PTEMPA2 = -6.133162e-01 POFFSET = 0.000000e+00 volt 0: offset = -4.844105e-02, slope = 1.246264e+00 volt 1: offset = -4.821895e-02, slope = 1.246629e+00 volt 2: offset = -4.817895e-02, slope = 1.246666e+00 volt 3: offset = -4.868737e-02, slope = 1.247244e+00 EXTFREQSF = 1.000032e+00* dh cast 28 28 Feb 2008 09:07:15 samples 56021 to 57025, avg = 1, stop = mag swit ch S> # nquan = 7 # nvalues = 1005 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = dz/dtM: Descent Rate [m/s] # name 5 = sal00: Salinity [PSU] # name 6 = flag: flag # span 0 = 1, 1005 # span 1 = 0.164, 31.809 # span 2 = 5.2099, 7.0815 # span 3 = 0.000021, 3.127729 # span 4 = -0.808, 0.866 # span 5 = 0.0021, 30.5343 # span 6 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = Feb 28 2008 09:07:15 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 5299, 20-Dec-07 # sensor 1 = Frequency 1 conductivity, 5299, 20-Dec-07, cpcor = -9.5700e-08 # sensor 2 = Pressure Number, 63507 # datcnv_date = Mar 18 2008 14:13:07, 7.12 # datcnv_in = Q:\Cruise_Data_Processing\2008-13\Processing\2008-13-0044.hex Q:\C ruise_Data_Processing\2008-13\Processing\doc\5299.con # datcnv_skipover = 0 # filter_date = Mar 18 2008 14:42:41, 7.12 # filter_in = Q:\Cruise_Data_Processing\2008-13\Processing\convert\2008-13-0044. cnv # filter_low_pass_tc_A = 0.500 # filter_low_pass_tc_B = 1.000 # filter_low_pass_A_vars = c0S/m # filter_low_pass_B_vars = prdM # Derive_date = Mar 18 2008 15:19:43, 7.12 # Derive_in = Q:\Cruise_Data_Processing\2008-13\Processing\filter\2008-13-0044.c nv Q:\Cruise_Data_Processing\2008-01\Processing\doc\2008-01-ctd.con # file_type = ascii END* CTDEDIT was used to remove a few records from the bottom of the cast. ******************************************************************* SeaCat salinity is prone to error due to a mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. Such errors are likely to be larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05 units in areas of high gradients. ******************************************************************* !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.3 6.1247 26.1273 3 2.0 6.1970 26.5269 10 3.0 6.3271 27.2848 9 3.9 6.6453 28.7736 7 4.9 6.7390 29.3324 7 6.0 6.7964 29.5785 7 6.9 6.8620 29.8578 6 7.9 6.9344 30.1148 7 9.0 6.9642 30.2723 7 9.9 6.9758 30.3081 6 10.9 6.9804 30.3217 7 11.9 6.9889 30.3574 6 12.9 6.9953 30.3908 7 13.9 6.9951 30.3962 6 14.9 6.9954 30.3969 7 16.0 6.9969 30.4030 7 17.0 7.0033 30.4193 6 18.0 7.0120 30.4381 7 19.0 7.0238 30.4502 6 19.9 7.0261 30.4536 6 20.9 7.0265 30.4549 7 22.0 7.0304 30.4572 7 23.0 7.0310 30.4578 6 23.9 7.0314 30.4590 6 24.9 7.0332 30.4650 7 25.9 7.0556 30.4937 6 26.9 7.0609 30.5097 7 27.9 7.0618 30.5137 6 29.0 7.0711 30.5216 6 30.0 7.0791 30.5297 5 31.0 7.0812 30.5331 7 31.5 7.0814 30.5335 2