*2009/03/24 16:20:18.28 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2008/05/24 15:03:51.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 86 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : E7D7BA6D NUMBER OF CHANNELS : 3 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------- -------------- -------------- 1 Pressure decibar 2.465 86.60773 2 Transmissivity %/metre 16.05 50.25333 3 Number_of_bin_records n/a 4 116 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 6 F ' ' 1 3 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2008-05\Pro $END *ADMINISTRATION MISSION : 2008-05 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : LaPerouse SCIENTIST : Yelland D. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : WCVI STATION : LC01 EVENT NUMBER : 59 LATITUDE : 48 50.45000 N ! (deg min) LONGITUDE : 125 27.69000 W ! (deg min) WATER DEPTH : 94 ALTIMETER (M) : 9.43 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 4054 conductivity:primary ' ' 2399 pressure ' ' 63507 temperature:secondary ' ' 4700 conductivity:secondary ' ' 3396 Fluorometer ' ' Seapoint transmissometer:primary ' ' 1005DR Oxygen:SBE ' ' 1176 altimeter: ' ' ' ' $END $REMARKS SOFTWARE VERSION SEASAVE V 7.16 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.1 2009/03/02 18:03:25 18073 18073 CLEAN 5.0.2 2009/03/02 19:17:00 17912 17912 SHIFTDAT 3.4 2009/03/02 19:40:25 17912 17912 SHIFTDAT 3.4 2009/03/20 19:28:27 17912 17912 SHIFTDAT 3.4 2009/03/20 19:49:47 17912 17912 DELETE 6.3 2009/03/20 20:08:09 17912 1697 CTDEDIT 4.61 2009/03/22 16:44:55 1697 1583 CALIB 11.7 2009/03/24 11:51:50 1583 1583 CALIB 11.7 2009/03/24 13:07:37 1583 1583 FILTERS 4.3 2009/03/24 13:17:46 1583 1583 BINAVE 4.1.1 2009/03/24 13:26:35 1583 86 REMOVECH 8.0 2009/03/24 15:58:30 86 86 HDREDIT2 2.5.1 2009/03/24 16:20:18 ? ? $END $REMARKS -CLEAN functions: 2009/03/02 19:08:04 20 Reset #RECS, MIN & MAX values in header. Interpolation by Channel 1: Scan_Number [n/a] in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift= 70.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.40 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 76.73 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CTDEDIT 2009/03/22 16:44:55 114 records were deleted in this editing session. 30 changes in channel Salinity:T0:C0 -CALIB parameters: 2009/03/24 11:51:50 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-05\Processing\doc\2008-05-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 13 Salinity:T0:C0 PSS-78 10 -0.1500000E-02 0.1000000E+01 15 Oxygen:Dissolved:SBE mL/L 10 0.4200000E-01 0.1062500E+01 -CALIB parameters: 2009/03/24 13:07:37 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data_Processing\2008-05\Processing\doc\2008-05-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 15 Oxygen:Dissolved:SBE mL/L 10 -0.4550000E-01 0.1004900E+01 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2009/03/24 15:58:30 14 channels removed. -HEADER EDITS: 2009/03/24 16:20:18 Applied edit header: Q:\Cruise_Data_Processing\2008-05\Processing\doc\2008-05-HDR.TXT Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2008-05\2008-05-0059.hex Software Version Seasave V 7.16 Temperature SN = 4054 Conductivity SN = 2399 Number of Bytes Per Scan = 38 Number of Voltage Words = 3 Number of Scans Averaged by the Deck Unit = 1 Append System Time to Every Scan System UpLoad Time = May 23 2008 16:18:13 NMEA Latitude = 48 50.45 N NMEA Longitude = 125 27.69 W NMEA UTC (Time) = May 24 2008 15:03:51 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2008-05 2008-05 Station: LC01 Latitude: Longitude: Depth (m): 94 # nquan = 16 # nvalues = 18073 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = altM: Altimeter [m] # name 10 = dz/dtM: Descent Rate [m/s] # name 11 = pumps: Pump Status # name 12 = sal00: Salinity [PSU] # name 13 = sal11: Salinity, 2 [PSU] # name 14 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2 # name 15 = flag: flag # span 0 = 1, 18073 # span 1 = 1.025, 86.729 # span 2 = 7.0119, 11.5267 # span 3 = 7.3024, 11.7692 # span 4 = 0.105328, 3.447014 # span 5 = 0.141098, 3.187423 # span 6 = 2.3179, 90.0678 # span 7 = 1.9341e+00, 7.1209e+00 # span 8 = 1.8474, 4.8669 # span 9 = 0.00, 100.00 # span 10 = -1.564, 1.883 # span 11 = 0, 1 # span 12 = 0.7898, 31.7622 # span 13 = 1.0548, 28.9172 # span 14 = 3.63473, 12.21746 # span 15 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = May 23 2008 16:18:13 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 4054, 16-Jan-08 # sensor 1 = Frequency 1 conductivity, primary, 2399, 15-Jan-08, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 4700, 16-Jan-08 # sensor 4 = Frequency 4 conductivity, secondary, 3396, 21-Dec-07, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 1005DR, 5-Mar-08 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1176, 14-Feb-07 # sensor 8 = Extrnl Volt 4 altimeter # datcnv_date = Feb 28 2009 18:14:34, 7.18c # datcnv_in = Q:\Cruise_Data_Processing\2008-05\Raw\CTD\2008-05-0059.hex Q:\Crui se_Data_Processing\2008-05\Processing\doc\2008-05-ctd1.con # datcnv_skipover = 0 # datcnv_ox_hysteresis_correction = no # wildedit_date = Feb 28 2009 19:23:00, 7.18c # wildedit_in = Q:\Cruise_Data_Processing\2008-05\Processing\convert\2008-05-005 9.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C c0S/m c1S/m # wildedit_excl_bad_scans = yes # celltm_date = Mar 02 2009 17:05:57, 7.18c # celltm_in = Q:\Cruise_Data_Processing\2008-05\Processing\wildedit\2008-05-0059 .cnv # celltm_alpha = 0.0200, 0.0300 # celltm_tau = 7.0000, 7.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Mar 02 2009 17:09:23, 7.18c # Derive_in = Q:\Cruise_Data_Processing\2008-05\Processing\celltm\2008-05-0059.c nv Q:\Cruise_Data_Processing\2008-05\Processing\doc\2008-05-ctd1.con # derive_time_window_docdt = seconds: 2 # derive_ox_tau_correction = yes # file_type = ascii END* ************************************************************ NOTE: ALL PUMPED CHANNELS CONTAINED BAD DATA FOR THIS CAST. ************************************************************ Transmissivity data are nominal and unedited except that some records were removed in editing temperature and salinity. $END !--1--- --2-- -3-- !Pressu Trans Numb !re missi er_o ! vity ~bin ! _rec ! ords !------ ----- ---- *END OF HEADER 2.5 18.1 4 3.0 16.0 38 4.0 16.4 35 4.9 19.6 48 6.0 21.0 25 7.0 22.5 20 8.0 26.7 19 9.0 28.8 24 10.0 32.0 30 11.0 32.7 23 12.0 32.3 18 13.0 32.1 15 14.0 32.1 16 15.0 32.2 17 16.0 32.6 21 17.0 34.0 21 18.0 37.3 19 19.0 37.6 16 20.0 38.0 15 21.0 38.9 15 22.0 40.4 14 23.0 41.0 15 24.0 42.1 16 25.0 43.7 18 26.0 45.4 19 27.0 46.4 17 28.0 46.9 16 29.0 47.8 14 30.0 48.6 14 31.0 48.7 13 32.0 48.7 13 33.0 49.1 13 34.0 49.3 13 35.0 49.3 15 36.0 49.4 15 37.0 49.5 18 38.0 49.5 16 39.0 49.5 19 40.0 49.7 16 41.0 49.9 15 42.0 49.9 14 43.0 49.9 14 44.0 49.9 14 45.0 49.8 14 46.0 50.0 16 47.0 50.3 15 48.0 50.1 14 49.0 50.1 13 50.0 50.0 12 51.0 49.8 13 52.0 49.8 15 53.0 49.8 16 54.0 49.9 18 55.0 49.9 20 56.0 49.8 18 57.0 49.6 15 58.0 49.5 14 59.0 49.4 13 60.0 49.2 13 61.0 49.2 13 62.0 49.0 14 63.0 49.1 16 64.0 49.2 17 65.0 49.4 17 66.0 49.4 16 67.0 48.8 14 68.0 48.7 14 69.0 48.4 13 70.0 48.3 13 71.0 48.1 14 72.0 48.2 16 73.0 48.1 18 74.0 48.3 18 75.0 48.3 15 76.0 48.3 15 77.0 48.3 13 78.0 48.1 14 79.0 47.7 13 80.0 47.8 15 81.0 47.6 15 82.0 47.1 15 83.0 46.0 19 84.0 45.4 22 85.2 45.4 53 86.0 45.4 116 86.6 45.5 15