*2007/12/19 14:03:54.46 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2007/10/14 14:09:14.000 TIME INCREMENT : 0 0 0 0.125 0 ! (day hr min sec ms) NUMBER OF RECORDS : 22 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : B543FE2E NUMBER OF CHANNELS : 6 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 1.3 21.65 2 Temperature:Primary 'deg C (ITS90)' 10.25165 10.99503 3 Transmissivity %/metre 0 49.6 4 Salinity:T0:C0 PSS-78 29.55693 31.88908 5 Fluorescence:URU:Seapoint mg/m^3 0.2319 1.02375 6 Number_of_bin_records n/a 3 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 8 F ' ' 3 6 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2007-65\Pro Comments from secondary file: Q:\Cruise_Data_Processing\2007-65\Processing\ios\2007-65-0074.delfl ------------------------------------------------------------------- This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2007-65\Pro $END *ADMINISTRATION MISSION : 2007-65 AGENCY : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Trudel M. PLATFORM : Viking Storm *LOCATION GEOGRAPHIC AREA : N.E.Pacific STATION : EP 01 EVENT NUMBER : 74 LATITUDE : 49 21.48000 N ! (deg min) LONGITUDE : 126 32.10000 W ! (deg min) WATER DEPTH : 30 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-25 SERIAL NUMBER : 0404 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature ' ' 4700 conductivity ' ' 3184 Pressure ' ' 0573 Fluorometer ' ' Seapoint transmissometer:primary ' ' 498DR $END $REMARKS SOFTWARE VERSION 1.57 Comments from secondary file: Q:\Cruise_Data_Processing\2007-65\Processing\ios\2007-65-0074.delfl ------------------------------------------------------------------- SOFTWARE VERSION 1.57 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.0 2007/12/14 14:47:30 1791 1791 CLEAN 5.0.2 2007/12/14 14:51:48 ? ? HDREDIT2 2.5.1 2007/12/14 15:06:06 ? ? ADTIMCH 4.3 2007/12/15 16:15:22 1655 1655 SHIFTDAT 3.4 2007/12/15 16:52:32 1655 1655 DELETE 6.3 2007/12/15 16:55:55 1655 196 CTDEDIT 4.61 2007/12/17 14:49:25 196 185 MERGE 3.3 2007/12/19 12:58:53 185 185 FILTERS 4.3 2007/12/19 13:12:07 185 185 BINAVE 4.1.1 2007/12/19 13:12:46 185 22 REMOVECH 8.0 2007/12/19 14:03:32 22 22 HDREDIT2 2.5.1 2007/12/19 14:03:54 ? ? $END $REMARKS -CLEAN functions: 2007/12/14 14:51:37 20 Set event to last 4 characters of file name -HEADER EDITS: 2007/12/14 15:06:06 Applied edit header: Q:\Cruise_Data_Processing\2007-65\Processing\doc\2007-65-header.txt Channel 2: Pressure [decibar] Name: Pressure:StrainGauge ==> Pressure Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 6: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary [S/m] # of Records to Advance (-ve for Delay): At REC# 0 Shift= 1.00 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 11.80 dbars Sample interval (from FILE section of header) = 0.125 seconds. -CTDEDIT 2007/12/17 14:49:25 11 records were deleted in this editing session. No data values were changed. -The following MERGE parameters were used: 2007/12/19 12:58:29 2007/12/19 12:58:30 2007/12/19 12:58: Merge Channel: Pressure [decibar] Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: Scan_Number [n/a], Pressure [decibar], Temperature:Primary [deg C (ITS90)], Conductivity:Primary [S/m], Transmissivity [%/metre], Descent_Rate [m/s], Salinity:T0:C0 [PSS-78], Flag [n/a] Secondary Channels to Include: Fluorescence:URU:Seapoint [mg/m^3] Primary file : Q:\Cruise_Data_Processing\2007-65\Processing\ios\2007-65-0074.edt Secondary file: Q:\Cruise_Data_Processing\2007-65\Processing\ios\2007-65-0074.delfl Comments from secondary file: Q:\Cruise_Data_Processing\2007-65\Processing\ios\2007-65-0074.delfl ------------------------------------------------------------------- -CLEAN functions: 2007/12/14 14:51:37 20 Set event to last 4 characters of file name -HEADER EDITS: 2007/12/14 15:06:06 Applied edit header: Q:\Cruise_Data_Processing\2007-65\Processing\doc\2007-65-header.txt Channel 2: Pressure [decibar] Name: Pressure:StrainGauge ==> Pressure Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 6: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section Change time zone to UTC in header file section -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary [S/m] # of Records to Advance (-ve for Delay): At REC# 0 Shift= 1.00 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Fluorescence:URU:Seapoint [mg/m^3] # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 11.80 dbars Sample interval (from FILE section of header) = 0.125 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 5 The following channel(s) were filtered. Fluorescence:URU:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure [decibar] Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2007/12/19 14:03:32 4 channels removed. -HEADER EDITS: 2007/12/19 14:03:54 Applied edit header: Q:\Cruise_Data_Processing\2007-65\Processing\doc\2007-65-header.txt $END *COMMENTS SBE HEADER Sea-Bird SBE25 Data File: FileName = C:\data\Data\2007-65000000.hex Software Version 1.57 Temperature SN = 4700 Conductivity SN = 3184 System UpLoad Time = Oct 14 2007 17:12:47 Ship: C.F.V.Viking Storm Cruise:2007-65 Station:EP 01 Latitude: Longitude: ds SBE 25 CTD V 4.1c SN 0404 10/14/07 17:15:04.266 external pressure sensor, range = 1450 psia, tcval = -32 xtal = 9437232 clk = 32768.117 vmain = 11.9 iop = 184 vlith = 5.4 ncasts = 7 samples = 27245 free = 734996 lwait = 0 msec CTD configuration: number of scans averaged = 1, data stored at 8 scans per second real time data transmitted at 1 scans per second minimum conductivity frequency for pump turn on = 2678 pump delay = 60 seconds battery type = ALKALINE 2 external voltages sampled stored voltage # 0 = external voltage 0 stored voltage # 1 = external voltage 4 S> dh cast 0 10/14 07:09:14 smpls 0 to 1790 nv = 2 avg = 1 stp = switch of S> # nquan = 9 # nvalues = 1791 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 5 = flSP: Fluorescence, Seapoint # name 6 = dz/dtM: Descent Rate [m/s] # name 7 = sal00: Salinity [PSU] # name 8 = flag: flag # span 0 = 1, 1791 # span 1 = -0.550, 21.797 # span 2 = -3.7398, 12.0328 # span 3 = 0.022427, 3.526211 # span 4 = -1.1679, 89.0960 # span 5 = 1.4652e-02, 1.1648e+00 # span 6 = -1.067, 1.481 # span 7 = 0.1466, 31.8915 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.125 # start_time = Oct 14 2007 07:09:14 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 4700, 29-Jul-06 # sensor 1 = Frequency 1 conductivity, 3184, 04-Aug-06, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 0573, 22-May-06, cpcor = -9.5700e-08 # sensor 3 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 4 = Extrnl Volt 1 transmissometer, primary, 498DR, 3-Oct-07 # datcnv_date = Dec 14 2007 13:00:20, 7.12 # datcnv_in = Q:\Cruise_Data_Processing\2007-65\RAW\CTD\2007-65-0074.hex Q:\Crui se_Data_Processing\2007-65\Processing\doc\0404ctd.con # datcnv_skipover = 0 # wildedit_date = Dec 14 2007 13:10:43, 7.12 # wildedit_in = Q:\Cruise_Data_Processing\2007-65\Processing\convert\2007-65-007 4.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 20.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 25 # wildedit_vars = prSM t090C c0S/m # wildedit_excl_bad_scans = yes # wfilter_date = Dec 14 2007 13:16:21, 7.12 # wfilter_in = Q:\Cruise_Data_Processing\2007-65\Processing\wildedit\2007-65-007 4.cnv # wfilter_excl_bad_scans = yes # wfilter_action prSM = cosine, 5 # wfilter_action t090C = cosine, 5 # wfilter_action c0S/m = cosine, 5 # celltm_date = Dec 14 2007 14:40:38, 7.12 # celltm_in = Q:\Cruise_Data_Processing\2007-65\Processing\wfilter\2007-65-0074. cnv # celltm_alpha = 0.0300, 0.0000 # celltm_tau = 9.0000, 0.0000 # celltm_temp_sensor_use_for_cond = primary, # Derive_date = Dec 14 2007 14:42:23, 7.12 # Derive_in = Q:\Cruise_Data_Processing\2007-65\Processing\celltm\2007-65-0074.c nv Q:\Cruise_Data_Processing\2007-46\Processing\doc\2007-46-ctd.CON # file_type = ascii END* CTDEDIT was used to remove surface records to 1.1db; salinity was cleaned lightly. Comments from secondary file: Q:\Cruise_Data_Processing\2007-65\Processing\ios\2007-65-0074.delfl ------------------------------------------------------------------- SBE HEADER Sea-Bird SBE25 Data File: FileName = C:\data\Data\2007-65000000.hex Software Version 1.57 Temperature SN = 4700 Conductivity SN = 3184 System UpLoad Time = Oct 14 2007 17:12:47 Ship: C.F.V.Viking Storm Cruise:2007-65 Station:EP 01 Latitude: Longitude: ds SBE 25 CTD V 4.1c SN 0404 10/14/07 17:15:04.266 external pressure sensor, range = 1450 psia, tcval = -32 xtal = 9437232 clk = 32768.117 vmain = 11.9 iop = 184 vlith = 5.4 ncasts = 7 samples = 27245 free = 734996 lwait = 0 msec CTD configuration: number of scans averaged = 1, data stored at 8 scans per second real time data transmitted at 1 scans per second minimum conductivity frequency for pump turn on = 2678 pump delay = 60 seconds battery type = ALKALINE 2 external voltages sampled stored voltage # 0 = external voltage 0 stored voltage # 1 = external voltage 4 S> dh cast 0 10/14 07:09:14 smpls 0 to 1790 nv = 2 avg = 1 stp = switch of S> # nquan = 9 # nvalues = 1791 # units = specified # name 0 = scan: Scan Count # name 1 = prSM: Pressure, Strain Gauge [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 5 = flSP: Fluorescence, Seapoint # name 6 = dz/dtM: Descent Rate [m/s] # name 7 = sal00: Salinity [PSU] # name 8 = flag: flag # span 0 = 1, 1791 # span 1 = -0.550, 21.797 # span 2 = -3.7398, 12.0328 # span 3 = 0.022427, 3.526211 # span 4 = -1.1679, 89.0960 # span 5 = 1.4652e-02, 1.1648e+00 # span 6 = -1.067, 1.481 # span 7 = 0.1466, 31.8915 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.125 # start_time = Oct 14 2007 07:09:14 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 4700, 29-Jul-06 # sensor 1 = Frequency 1 conductivity, 3184, 04-Aug-06, cpcor = -9.5700e-08 # sensor 2 = Pressure Voltage, 0573, 22-May-06, cpcor = -9.5700e-08 # sensor 3 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 4 = Extrnl Volt 1 transmissometer, primary, 498DR, 3-Oct-07 # datcnv_date = Dec 14 2007 13:00:20, 7.12 # datcnv_in = Q:\Cruise_Data_Processing\2007-65\RAW\CTD\2007-65-0074.hex Q:\Crui se_Data_Processing\2007-65\Processing\doc\0404ctd.con # datcnv_skipover = 0 # wildedit_date = Dec 14 2007 13:10:43, 7.12 # wildedit_in = Q:\Cruise_Data_Processing\2007-65\Processing\convert\2007-65-007 4.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 20.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 25 # wildedit_vars = prSM t090C c0S/m # wildedit_excl_bad_scans = yes # wfilter_date = Dec 14 2007 13:16:21, 7.12 # wfilter_in = Q:\Cruise_Data_Processing\2007-65\Processing\wildedit\2007-65-007 4.cnv # wfilter_excl_bad_scans = yes # wfilter_action prSM = cosine, 5 # wfilter_action t090C = cosine, 5 # wfilter_action c0S/m = cosine, 5 # celltm_date = Dec 14 2007 14:40:38, 7.12 # celltm_in = Q:\Cruise_Data_Processing\2007-65\Processing\wfilter\2007-65-0074. cnv # celltm_alpha = 0.0300, 0.0000 # celltm_tau = 9.0000, 0.0000 # celltm_temp_sensor_use_for_cond = primary, # Derive_date = Dec 14 2007 14:42:23, 7.12 # Derive_in = Q:\Cruise_Data_Processing\2007-65\Processing\celltm\2007-65-0074.c nv Q:\Cruise_Data_Processing\2007-46\Processing\doc\2007-46-ctd.CON # file_type = ascii END* Fluorescence and Transmissivity are unedited and nominal, except that some records were removed in editing temperature and salinity. !--1--- ---2---- --3-- ---4---- ---5--- -6-- !Pressu Temperat Trans Salinity Fluores Numb !re ure: missi :T0:C0 cence: er_o ! Primary vity URU: ~bin ! Seapoin _rec ! t ords !------ -------- ----- -------- ------- ---- *END OF HEADER 1.3 10.9950 0.0 29.5569 0.430 3 2.0 10.9885 41.0 29.6727 0.758 10 2.9 10.9803 41.0 29.7476 0.761 9 4.0 10.9730 41.3 29.8314 0.766 10 4.9 10.9649 41.3 29.9442 0.944 9 6.0 10.9507 40.9 30.1307 1.024 8 6.9 10.9272 40.9 30.2808 0.873 10 8.0 10.8998 41.7 30.4135 0.787 9 8.9 10.8079 44.0 30.4918 0.597 10 9.9 10.6857 45.3 30.6028 0.619 10 10.9 10.7062 44.8 30.6742 0.559 10 12.0 10.6261 45.2 30.8378 0.403 7 13.0 10.5222 46.0 30.9907 0.380 8 13.9 10.4509 47.5 31.0981 0.333 10 14.9 10.4409 47.2 31.1210 0.312 8 16.0 10.4265 46.8 31.2191 0.265 5 17.0 10.3701 46.8 31.3117 0.258 6 17.9 10.3469 46.5 31.3221 0.242 9 19.0 10.3147 46.0 31.3319 0.232 10 20.0 10.3343 46.0 31.5613 0.234 10 21.0 10.2797 49.6 31.8449 0.235 10 21.6 10.2516 47.8 31.8891 0.266 4