*2008/01/11 11:14:54.17 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2007/06/28 18:46:38.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 17 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : BFC23AED NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 0.3 15.65 2 Temperature 'deg C (ITS90)' 8.559175 14.1908 3 Salinity:T0:C0 PSS-78 9.607966 29.81437 4 Number_of_bin_records n/a 3 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2007-39\Pro $END *ADMINISTRATION MISSION : 2007-39 AGENCY : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : Broughton Salmon and Sea Lice SCIENTIST : Hargreaves B. PLATFORM : Walker Rock *LOCATION GEOGRAPHIC AREA : Broughton Archipelago & Knight Inlet STATION : Phillip Pt. West Beach Seine EVENT NUMBER : 98 LATITUDE : 50 52.31700 N ! (deg min) LONGITUDE : 126 41.29800 W ! (deg min) WATER DEPTH : 20 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-16 SERIAL NUMBER : 4345 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 4345 conductivity ' ' 4345 Pressure ' ' ' ' Oxygen:SBE ' ' 0766 $END $REMARKS SOFTWARE VERSION 1.56 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.0 2008/01/10 17:07:52 641 641 HDREDIT2 2.5.1 2008/01/10 17:12:16 ? ? ADTIMCH 4.3 2008/01/11 09:32:25 641 641 SHIFTDAT 3.4 2008/01/11 09:32:37 641 641 CLIP 1.3 2008/01/11 09:32:54 641 620 DELETE 6.3 2008/01/11 09:33:10 620 125 BINAVE 4.1.1 2008/01/11 11:14:35 125 17 REMOVECH 8.0 2008/01/11 11:14:45 17 17 HDREDIT2 2.5.1 2008/01/11 11:14:54 ? ? $END $REMARKS -HEADER EDITS: 2008/01/10 17:12:16 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr Channel 2: Pressure [decibar] Units: dbars ==> decibar -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 22, 40000 Time Not Available in File -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 5.80 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/01/11 11:14:45 6 channels removed. -HEADER EDITS: 2008/01/11 11:14:54 Applied edit header: Q:\Cruise_Data_Processing\2007-39\Processing\doc\2007-39-hdr.txt $END *COMMENTS SBE HEADER Sea-Bird SBE16plus Data File: FileName = C:\Data\4345\PBS\PBSJune07.hex Software Version 1.56 Temperature SN = 4345 Conductivity SN = 4345 System UpLoad Time = Oct 01 2007 14:01:11 ds SeacatPlus V 1.6 SERIAL NO. 4345 01 Oct 2007 14:00:31 vbatt = 13.8, vlith = 7.9, ioper = 62.9 ma, ipump = 0.3 ma, status = not logging number of scans to average = 1 samples = 98172, free = 664428, casts = 105 mode = profile, minimum cond freq = 2700, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 1450.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> SeacatPlus V 1.6 SERIAL NO. 4345 01 Oct 2007 14:00:44 temperature: 10-may-06 TA0 = 1.267399e-03 TA1 = 2.642509e-04 TA2 = -1.329477e-07 TA3 = 1.595361e-07 TOFFSET = 0.000000e+00 conductivity: 10-may-06 G = -1.061827e+00 H = 1.507256e-01 I = -7.165010e-05 J = 3.226793e-05 CF0 = 2.654168e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 2104, range = 1450 psia: 02-may-06 PA0 = -2.219749e-01 PA1 = 4.442372e-03 PA2 = -3.413693e-12 PTCA0 = 5.211985e+05 PTCA1 = -5.893066e+00 PTCA2 = 1.634108e-01 PTCB0 = 2.473187e+01 PTCB1 = -6.250001e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -7.979351e+01 PTEMPA1 = 4.767456e+01 PTEMPA2 = -3.943510e-01 POFFSET = 0.000000e+00 volt 0: offset = -4.587333e-02, slope = 1.252627e+00 volt 1: offset = -4.587333e-02, slope = 1.252023e+00 volt 2: offset = -4.563000e-02, slope = 1.251223e+00 volt 3: offset = -4.525667e-02, slope = 1.251750e+00 EXTFREQSF = 1.000127e+00 dh cast 98 28 Jun 2007 11:46:38 samples 91547 to 92187, avg = 1, stop = mag swit ch S> # nquan = 9 # nvalues = 641 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = sbeox0V: Oxygen Voltage, SBE 43 # name 5 = sbeox0ML/L: Oxygen, SBE 43 [ml/l] # name 6 = dz/dtM: Descent Rate [m/s] # name 7 = sal00: Salinity [PSU] # name 8 = flag: flag # span 0 = 91547, 92187 # span 1 = -0.045, 15.783 # span 2 = 8.5575, 14.2134 # span 3 = 0.160819, 3.181167 # span 4 = 3.1409, 3.1409 # span 5 = 5.81553, 6.56131 # span 6 = -0.580, 0.728 # span 7 = 1.0515, 29.8179 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = Jun 19 2007 10:59:28 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 4345, 10-May-06 # sensor 1 = Frequency 1 conductivity, 4345, 10-May-06, cpcor = -9.5700e-08 # sensor 2 = Pressure Number # sensor 3 = Extrnl Volt 0 Oxygen, SBE, primary, 0766, 04-Jan-07p # datcnv_date = Jan 08 2008 17:25:03, 7.12 # datcnv_in = Q:\Cruise_Data_Processing\2007-39\RAW\PBSJune07.hex Q:\Cruise_Data _Processing\2007-39\Processing\doc\2007-39-ctd.con # datcnv_skipover = 91546 # filter_date = Jan 10 2008 17:07:15, 7.12 # filter_in = Q:\Cruise_Data_Processing\2007-39\Processing\convert\2007-39-0098. cnv # filter_low_pass_tc_A = 2.000 # filter_low_pass_tc_B = 0.500 # filter_low_pass_A_vars = prdM # filter_low_pass_B_vars = c0S/m # Derive_date = Jan 10 2008 17:07:33, 7.12 # Derive_in = Q:\Cruise_Data_Processing\2007-39\Processing\Filter\2007-39-0098.c nv Q:\Cruise_Data_Processing\2007-39\Processing\doc\2007-39-ctd.con # file_type = ascii END* There were problems with the temperature and salinity data for a few casts that may be due to a corroded bulkhead connector. Downcast data were heavily corrupted for some casts; for all but one of those, the upcast data were better and were chosen for archiving. Whenever upcast data were selected a special note was made in the header. There was no salinity calibration sampling; no recalibration was applied. SeaCat salinity is prone to error due to a mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. Such errors are likely to be larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05 units in areas of high gradients. **************************************************************************** !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 0.3 14.1908 9.6080 3 0.9 13.9100 10.7396 10 1.9 13.6217 12.0290 9 3.0 13.1642 14.7593 8 4.0 11.6266 21.4384 7 4.9 10.2290 26.3248 7 5.9 9.7736 27.5571 7 6.9 9.6959 27.8228 7 7.9 9.5596 28.0972 8 9.0 9.3020 28.5718 7 9.9 9.0747 29.0119 7 11.0 8.9070 29.2997 8 12.0 8.8119 29.4631 7 13.0 8.6687 29.6788 8 14.0 8.5907 29.7828 8 14.9 8.5629 29.8106 10 15.6 8.5592 29.8144 4