*2008/01/08 15:57:12.31 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2007/05/31 16:56:32.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 33 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : EE2CD029 NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 1.128571 32.76667 2 Temperature 'deg C (ITS90)' 7.880025 12.99984 3 Salinity:T0:C0 PSS-78 15.41076 30.68097 4 Number_of_bin_records n/a 3 7 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2007-38\Pro $END *ADMINISTRATION MISSION : 2007-38 AGENCY : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : Broughton Salmon and Sea Lice SCIENTIST : Hargreaves B. PLATFORM : Walker Rock *LOCATION GEOGRAPHIC AREA : Broughton Archipelago & Knight Inlet STATION : Cartright Bay Beach Seine EVENT NUMBER : 291 LATITUDE : 50 52.94900 N ! (deg min) LONGITUDE : 126 46.36700 W ! (deg min) WATER DEPTH : 30 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 4345 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 4345 conductivity ' ' 4345 Pressure ' ' ' ' Oxygen:SBE ' ' 0766 $END $REMARKS SOFTWARE VERSION 1.53 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.0 2008/01/07 16:33:43 779 779 SHIFTDAT 3.4 2008/01/07 17:16:59 779 779 CLIP 1.3 2008/01/07 17:25:47 779 758 REVERSE 2.0 2008/01/07 17:26:21 758 758 DELETE 6.3 2008/01/07 17:27:11 758 213 CTDEDIT 4.61 2008/01/08 14:09:22 213 122 HDREDIT2 2.5.1 2008/01/08 14:41:27 ? ? ADTIMCH 4.3 2008/01/08 15:13:37 122 122 BINAVE 4.1.1 2008/01/08 15:14:08 122 33 REMOVECH 8.0 2008/01/08 15:47:04 33 33 HDREDIT2 2.5.1 2008/01/08 15:57:12 ? ? $END $REMARKS -The following SHIFT parameters were used. Shift Channel: Temperature # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 22, 40000 Time Not Available in File -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 26.42 dbars Sample interval (from FILE section of header) = 0.250 seconds. -CTDEDIT 2008/01/08 14:09:22 91 records were deleted in this editing session. No data values were changed. -HEADER EDITS: 2008/01/08 14:41:27 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr Channel 2: Pressure [decibar] Units: dbars ==> decibar -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/01/08 15:47:04 6 channels removed. -HEADER EDITS: 2008/01/08 15:57:12 Applied edit header: Q:\Cruise_Data_Processing\2007-38\Processing\doc\2007-38-hdr-upcast.txt $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Program Files\Sea-Bird\Seaterm\May 30 2007 CTD files\May 31 2007 CTD file291.hex Software Version 1.53 Temperature SN = 4345 Conductivity SN = 4345 System UpLoad Time = Jun 18 2007 05:51:02 ds SeacatPlus V 1.6 SERIAL NO. 4345 18 Jun 2007 05:53:24 vbatt = 12.0, vlith = 8.1, ioper = 62.9 ma, ipump = 57.9 ma, status = not logging number of scans to average = 1 samples = 318484, free = 444116, casts = 299 mode = profile, minimum cond freq = 2700, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 1450.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> atPlus dh cast 291 31 May 2007 09:56:32 samples 292915 to 293693, avg = 1, stop = mag sw itch S> # nquan = 9 # nvalues = 779 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = sbeox0V: Oxygen Voltage, SBE 43 # name 5 = sbeox0ML/L: Oxygen, SBE 43 [ml/l] # name 6 = dz/dtM: Descent Rate [m/s] # name 7 = sal00: Salinity [PSU] # name 8 = flag: flag # span 0 = 1, 779 # span 1 = -0.133, 36.415 # span 2 = 7.8744, 14.6284 # span 3 = 0.022411, 3.223953 # span 4 = 3.1409, 3.1409 # span 5 = 5.94351, 6.94182 # span 6 = -1.307, 0.450 # span 7 = 0.1461, 30.6998 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = May 31 2007 09:56:32 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 4345, 10-May-06 # sensor 1 = Frequency 1 conductivity, 4345, 10-May-06, cpcor = -9.5700e-08 # sensor 2 = Pressure Number # sensor 3 = Extrnl Volt 0 Oxygen, SBE, primary, 0766, 04-Jan-07p # datcnv_date = Jan 04 2008 13:51:07, 7.12 # datcnv_in = Q:\Cruise_Data_Processing\2007-38\RAW\2007-38-0291.hex Q:\Cruise_D ata_Processing\2007-38\Processing\doc\2007-38-ctd.con # datcnv_skipover = 0 # filter_date = Jan 04 2008 13:52:51, 7.12 # filter_in = Q:\Cruise_Data_Processing\2007-38\Processing\convert\2007-38-0291. cnv # filter_low_pass_tc_A = 2.000 # filter_low_pass_tc_B = 0.500 # filter_low_pass_A_vars = prdM # filter_low_pass_B_vars = c0S/m # Derive_date = Jan 04 2008 13:55:07, 7.12 # Derive_in = Q:\Cruise_Data_Processing\2007-38\Processing\Filter\2007-38-0291.c nv Q:\Cruise_Data_Processing\2007-38\Processing\doc\2007-38-ctd.con # file_type = ascii END* CTDEDIT was used to remove surface records to 0.9db and records from the bottom 3.5m of the cast. ************************************************ NOTE: The data in this file are from the UPCAST ************************************************ There were problems with the temperature and salinity data for many casts that may be due to a corroded bulkhead connector. Many cast files were heavily corrupted and unusable. For some the downcast section was corrupted, but the upcast was better. There was no salinity calibration sampling; no recalibration was applied. SeaCat salinity is prone to error due to a mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. Such errors are likely to be larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05 units in areas of high gradients. **************************************************************************** !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 1.1 12.9998 15.4108 7 1.9 10.0714 25.4905 7 2.9 9.6588 27.4883 5 4.0 9.4275 28.0229 4 4.9 9.1791 28.5060 3 5.9 9.0068 28.8451 4 6.9 8.8277 29.1690 3 7.9 8.6298 29.5027 3 8.9 8.4324 29.8219 4 10.0 8.3395 29.9662 3 10.9 8.2924 30.0260 3 11.9 8.2880 30.0350 4 13.1 8.2835 30.0434 3 14.0 8.2741 30.0585 3 14.9 8.2646 30.0748 3 15.9 8.2614 30.0854 4 17.0 8.2565 30.0978 3 18.0 8.2426 30.1223 3 18.9 8.2106 30.1714 3 20.0 8.1426 30.2612 4 21.0 8.0712 30.3407 3 21.9 8.0041 30.3972 3 23.0 7.9636 30.4233 4 24.0 7.9500 30.4289 3 24.9 7.9384 30.4345 3 26.0 7.9296 30.4423 4 26.9 7.9190 30.4624 3 28.0 7.9035 30.5016 4 28.9 7.8937 30.5375 3 29.9 7.8915 30.5657 4 30.9 7.8800 30.6202 4 32.0 7.8801 30.6637 5 32.8 7.8817 30.6810 3