*2008/01/03 16:46:45.15 *IOS HEADER VERSION 1.8 2007/05/25 2007/05/25 *FILE START TIME : UTC 2007/04/04 20:16:50.000 TIME INCREMENT : 0 0 0 0.25 0 ! (day hr min sec ms) NUMBER OF RECORDS : 19 DATA DESCRIPTION : CTD FILE TYPE : ASCII CRC : 6D685B4F NUMBER OF CHANNELS : 4 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 0.35 17.55 2 Temperature 'deg C (ITS90)' 7.35997 7.7467 3 Salinity:T0:C0 PSS-78 22.4076 29.95075 4 Number_of_bin_records n/a 2 10 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 9 F ' ' 4 4 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data_Processing\2007-36\Pro $END *ADMINISTRATION MISSION : 2007-36 AGENCY : PBS, Salmon And Freshwater Ecosystems, Nanaimo, B.C. COUNTRY : Canada PROJECT : Broughton Salmon and Sea Lice SCIENTIST : Hargreaves B. PLATFORM : Clupea *LOCATION GEOGRAPHIC AREA : Broughton Archipelago & Knight Inlet STATION : Phillip Pt. Beach Seine EVENT NUMBER : 63 LATITUDE : 50 52.33600 N ! (deg min) LONGITUDE : 126 41.20800 W ! (deg min) WATER DEPTH : 15 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-19plus SERIAL NUMBER : 4345 $TABLE: SENSORS ! Name Abs Depth Serial No ! -------------- -------------- ---------- temperature ' ' 4345 conductivity ' ' 4345 Pressure ' ' ' ' Oxygen:SBE ' ' 0766 $END $REMARKS SOFTWARE VERSION 1.53 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.0 2007/12/21 14:33:54 582 582 HDREDIT2 2.5.1 2007/12/21 14:35:41 ? ? ADTIMCH 4.3 2007/12/21 17:20:48 582 582 SHIFTDAT 3.4 2008/01/02 11:44:15 582 582 CLIP 1.3 2008/01/03 09:48:43 582 563 DELETE 6.3 2008/01/03 09:49:09 563 174 BINAVE 4.1.1 2008/01/03 16:27:51 174 19 REMOVECH 8.0 2008/01/03 16:35:50 19 19 HDREDIT2 2.5.1 2008/01/03 16:46:45 ? ? $END $REMARKS -HEADER EDITS: 2007/12/21 14:35:41 Applied edit header: C:\My Documents\sample headers\add long-lat-waterdepth-stnname.hdr -The following ADTIMCH parameters were used. Add 7.00 hours to times in header file section -The following SHIFT parameters were used. Shift Channel: Temperature [deg C (ITS90)] # of Records to Advance (-ve for Delay): At REC# 0 Shift= 2.25 Salinity was recalculated after shift -The following CLIP parameters were used. Clip by Record Number Limits First Record,Last Record = 20, 40000 Time Not Available in File -The following DELETE parameters were used: Surface Record Removal: Last Press Min Maximum Surface Pressure (relative): 10.00 Surface Swell Pressure Tolerance: 1.00 Pressure NOT filtered. Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.20m/s (calculated over 5 points) will be deleted. Drop rate applies in the range 10.00 to 7.60 dbars Sample interval (from FILE section of header) = 0.250 seconds. -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2008/01/03 16:35:50 6 channels removed. -HEADER EDITS: 2008/01/03 16:46:45 Applied edit header: Q:\Cruise_Data_Processing\2007-36\Processing\doc\2007-36-hdr.txt Channel 1: Pressure [decibar] Units: dbars ==> decibar $END *COMMENTS SBE HEADER Sea-Bird SBE19plus Data File: FileName = C:\Program Files\Sea-Bird\Seaterm\casts 1-86 April 24 2007 2nd Back up063.hex Software Version 1.53 Temperature SN = 4345 Conductivity SN = 4345 System UpLoad Time = Apr 24 2007 10:03:28 ds SeacatPlus V 1.6 SERIAL NO. 4345 24 Apr 2007 09:28:33 vbatt = 12.7, vlith = 7.9, ioper = 62.8 ma, ipump = 67.5 ma, status = not logging number of scans to average = 1 samples = 96913, free = 665687, casts = 86 mode = profile, minimum cond freq = 2700, pump delay = 30 sec autorun = no, ignore magnetic switch = no battery type = alkaline, battery cutoff = 7.3 volts pressure sensor = strain gauge, range = 1450.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = no, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> SeacatPlus V 1.6 SERIAL NO. 4345 24 Apr 2007 09:28:45 temperature: 10-may-06 TA0 = 1.267399e-03 TA1 = 2.642509e-04 TA2 = -1.329477e-07 TA3 = 1.595361e-07 TOFFSET = 0.000000e+00 conductivity: 10-may-06 G = -1.061827e+00 H = 1.507256e-01 I = -7.165010e-05 J = 3.226793e-05 CF0 = 2.654168e+03 CPCOR = -9.570000e-08 CTCOR = 3.250000e-06 CSLOPE = 1.000000e+00 pressure S/N = 2104, range = 1450 psia: 02-may-06 PA0 = -2.219749e-01 PA1 = 4.442372e-03 PA2 = -3.413693e-12 PTCA0 = 5.211985e+05 PTCA1 = -5.893066e+00 PTCA2 = 1.634108e-01 PTCB0 = 2.473187e+01 PTCB1 = -6.250001e-04 PTCB2 = 0.000000e+00 PTEMPA0 = -7.979351e+01 PTEMPA1 = 4.767456e+01 PTEMPA2 = -3.943510e-01 POFFSET = 0.000000e+00 volt 0: offset = -4.587333e-02, slope = 1.252627e+00 volt 1: offset = -4.587333e-02, slope = 1.252023e+00 volt 2: offset = -4.563000e-02, slope = 1.251223e+00 volt 3: offset = -4.525667e-02, slope = 1.251750e+00 EXTFREQSF = 1.000127e+00 dh cast 63 04 Apr 2007 13:16:50 samples 71288 to 71869, avg = 1, stop = mag swit ch S> # nquan = 9 # nvalues = 582 # units = specified # name 0 = scan: Scan Count # name 1 = prdM: Pressure, Strain Gauge [db] # name 2 = tv290C: Temperature [ITS-90, deg C] # name 3 = c0S/m: Conductivity [S/m] # name 4 = sbeox0V: Oxygen Voltage, SBE 43 # name 5 = sbeox0ML/L: Oxygen, SBE 43 [ml/l] # name 6 = dz/dtM: Descent Rate [m/s] # name 7 = sal00: Salinity [PSU] # name 8 = flag: flag # span 0 = 1, 582 # span 1 = -0.170, 17.586 # span 2 = 7.3104, 9.4471 # span 3 = 0.080836, 3.099754 # span 4 = 3.1409, 3.1409 # span 5 = 6.22238, 7.48079 # span 6 = -0.638, 0.418 # span 7 = 0.5743, 29.9556 # span 8 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.25 # start_time = Apr 04 2007 13:16:50 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 4345, 10-May-06 # sensor 1 = Frequency 1 conductivity, 4345, 10-May-06, cpcor = -9.5700e-08 # sensor 2 = Pressure Number # sensor 3 = Extrnl Volt 0 Oxygen, SBE, primary, 0766, 04-Jan-07p # datcnv_date = Dec 21 2007 13:04:16, 7.12 # datcnv_in = Q:\Cruise_Data_Processing\2007-36\RAW\2007-36-0063.hex Q:\Cruise_D ata_Processing\2007-36\Processing\doc\2007-36-ctd.con # datcnv_skipover = 0 # filter_date = Dec 21 2007 13:07:26, 7.12 # filter_in = Q:\Cruise_Data_Processing\2007-36\Processing\convert\2007-36-0063. cnv # filter_low_pass_tc_A = 2.000 # filter_low_pass_tc_B = 0.500 # filter_low_pass_A_vars = prdM # filter_low_pass_B_vars = c0S/m # Derive_date = Dec 21 2007 13:17:54, 7.12 # Derive_in = Q:\Cruise_Data_Processing\2007-36\Processing\Filter\2007-36-0063.c nv Q:\Cruise_Data_Processing\2007-36\Processing\doc\2007-36-ctd.con # file_type = ascii END* **************************************************************************** There was no salinity calibration sampling; no recalibration was applied. SeaCat salinity is prone to error due to a mismatch of conductivity and temperature response times, especially when the descent rate is non-uniform. Such errors are likely to be larger than calibration errors. SeaCat salinity errors are expected to be as high as 0.05 units in areas of high gradients. There was a dissolved oxygen sensor mounted on the CTD, but there was no signal recorded so the channel was removed. **************************************************************************** !--1--- ---2---- ---3---- -4-- !Pressu Temperat Salinity Numb !re ure :T0:C0 er_o ! ~bin ! _rec ! ords !------ -------- -------- ---- *END OF HEADER 0.4 7.7467 22.4076 2 0.9 7.5549 22.5860 10 2.0 7.4945 22.7054 10 3.0 7.4927 22.7906 10 4.0 7.4726 22.9914 10 4.9 7.4691 23.0962 10 5.9 7.4452 24.3013 10 6.9 7.3600 28.0897 10 7.9 7.3621 28.6775 10 8.9 7.3640 28.8444 10 9.9 7.3693 29.0156 10 10.9 7.3743 29.1650 10 11.9 7.3817 29.3813 10 12.9 7.3967 29.7140 10 13.9 7.4012 29.8039 10 14.9 7.4030 29.8424 10 15.9 7.4037 29.8741 10 17.0 7.4050 29.9301 10 17.5 7.4057 29.9507 2