*2017/03/24 14:12:55.52 *IOS HEADER VERSION 2.0 2016/04/28 2016/06/13 IVF16 *FILE START TIME : UTC 2007/08/12 19:30:44.000 NUMBER OF RECORDS : 13 DATA DESCRIPTION : CTD FILE TYPE : ASCII FORMAT : '(F10.3,F9.4,F7.2,F8.3,F11.3,F7.1,F8.3,F9.4,F5.0,E11.' CONTINUED : '3)' CRC : 97C0F951 NUMBER OF CHANNELS : 10 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------------------------- --------------- -------------- -------------- 1 Pressure decibar 2 14 2 Temperature:Primary 'deg C (ITS90)' -1.1794 -0.8081 3 Transmissivity %/metre 64.5464 65.708 4 Fluorescence:Calibrated:Seapoint mg/m^3 0.42E-01 0.49E-01 5 PAR:Reference uE/m^2/sec 656.1 661.8 6 Altimeter metres 1.3 98.6 7 Oxygen:Dissolved:SBE mL/L 6.429 8.816 8 Salinity:T0:C0 PSS-78 27.7314 27.9864 9 Number_of_bin_records n/a 1 142 10 Flag n/a 222 222 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 10 F ' ' 3 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 7 F ' ' 2 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 11 F ' ' 3 6 -99 ' ' 7 F ' ' 1 7 -99 ' ' 8 F ' ' 3 8 -99 ' ' 9 F ' ' 4 9 -99 ' ' 5 F ' ' 0 10 -99 ' ' 11 E ' ' 3 $END $REMARKS CTD Flag word has 3 columns: Temperature, Conductivity, and Oxygen. Data quality is expressed with the following flags: -------------------------------------------------------------------------------- 0 = No Quality Control. 2 = Good. 6 = Interpolated or replaced by dual sensor or upcast value. -------------------------------------------------------------------------------- This file converted from Sea-Bird file: Z:\SHARE\DATA\Data Archive Process - $END *ADMINISTRATION MISSION : 2007-20 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C COUNTRY : Canada PROJECT : Joint Ocean Ice Study (JOIS incl JWACS and BGOS) SCIENTIST : McLaughlin F. PLATFORM : Louis S. St. Laurent *LOCATION GEOGRAPHIC AREA : Arctic Ocean's Canada Basin STATION : CB11B EVENT NUMBER : 62 LATITUDE : 79 54.95000 N ! (deg min) LONGITUDE : 150 9.30000 W ! (deg min) WATER DEPTH : 3813 *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0724 $TABLE: SENSORS ! Name Abs Depth Serial No ! --------------------------- -------------- ---------- temperature:primary ' ' 4322 conductivity:primary ' ' 2809 pressure ' ' 90559 temperature:secondary ' ' 4239 conductivity:secondary ' ' 2810 Oxygen:SBE ' ' 435 altimeter:Datasonics ' ' 'PSA-916D SN:1161' Fluorometer:Seapoint ' ' 'SCF 2569' transmissometer:primary ' ' CST-662DR transmissometer:secondary ' ' 993DR irradiance:primary ' ' 'QSP2300 SN:70123' 'surface irradiance' ' ' 'QSR2200 SN:20279' $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.37D Satlantic ISUS Nitrate Sensor SN:72 was installed. $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 3.5.2 2017/03/10 15:41:29 8215 13 REMOVECH 8.2 2017/03/10 16:07:18 13 13 CALIB 11.8.1 2017/03/10 16:12:16 13 13 CALIB 11.8.1 2017/03/10 16:13:36 13 13 REMOVECH 8.2 2017/03/24 11:25:31 13 13 HDREDIT2 3.1.1 2017/03/24 14:12:55 ? ? $END $REMARKS -REMOVECH 2017/03/10 16:07:18 The following CHANNEL(S) were removed: Scan_Number Depth:Salt_Water [metres] Temperature:Secondary [deg C (ITS90)] Conductivity:Primary [mS/cm] Conductivity:Secondary [mS/cm] Oxygen:Voltage:SBE [volts] Transmissivity2 [%/metre] Salinity:T1:C1 [PSS-78] Temperature:Potential [deg C (ITS90)] Sigma:Theta [kg/m^3] Speed:Sound [m/s] -CALIB parameters: 2017/03/10 16:12:16 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Z:\SHARE\DATA\Data Archive Process - 2017\Joe's work\2007-20\CTD\Trans_volts.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Transmissivity %/metre 10 0.5590000E-01 0.5250000E-01 -CALIB parameters: 2017/03/10 16:13:36 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Z:\SHARE\DATA\Data Archive Process - 2017\Joe's work\2007-20\CTD\Trans_Percent. ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 3 Transmissivity %/metre 10 -0.1084000E+01 0.1936000E+02 6 PAR uE/m^2/se 10 0.0000000E+00 0.1597600E+01 -REMOVECH 2017/03/24 11:25:31 The following CHANNEL(S) were removed: Voltage:6 [volts] PAR [uE/m^2/sec] -HEADER EDITS: 2017/03/24 14:12:55 Applied edit header: Z:\SHARE\DATA\Data Archive Process - 2017\Joe's work\2007-20\Headers\2007-20 CTD Header.txt Channel 4: Fluorescence:Calibrated:Seapoint [mg/m^3] Name: Fluorescence:URU:Seapoint ==> Fluorescence:Calibrated:Seapoint $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Science\2007-20\CTD\raw\200720_062.DAT Software Version Seasave Win32 V 5.37d Temperature SN = 03P Conductivity SN = 04-2809 Number of Bytes Per Scan = 33 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Aug 12 2007 19:29:55 NMEA Latitude = 79 54.95 N NMEA Longitude = 150 09.30 W NMEA UTC (Time) = Aug 12 2007 19:30:44 Store Lat/Lon Data = Add to Header Only Ship: CCGS Louis S. St-Laurent Cruise: 2007-20 Station: CB11b Depth: 3813 # nquan = 23 # nvalues = 8215 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = depSM: Depth [salt water, m] # name 3 = t090C: Temperature [ITS-90, deg C] # name 4 = t190C: Temperature, 2 [ITS-90, deg C] # name 5 = c0mS/cm: Conductivity [mS/cm] # name 6 = c1mS/cm: Conductivity, 2 [mS/cm] # name 7 = sbeox0V: Oxygen Voltage, SBE 43 # name 8 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 9 = xmiss1: Beam Transmission, Chelsea/Seatech/Wetlab CStar, 2 [%] # name 10 = flSP: Fluorescence, Seapoint # name 11 = v6: Voltage 6 # name 12 = par: PAR/Irradiance, Biospherical/Licor # name 13 = spar: SPAR/Surface Irradiance # name 14 = altM: Altimeter [m] # name 15 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 1 # name 16 = sal00: Salinity [PSU] # name 17 = sal11: Salinity, 2 [PSU] # name 18 = nbin: number of scans per bin # name 19 = potemp090C: Potential Temperature [ITS-90, deg C] # name 20 = sigma-é00: Density [sigma-theta, Kg/m^3] # name 21 = svCM: Sound Velocity [Chen-Millero, m/s] # name 22 = flag: flag # span 0 = 11426, 12387 # span 1 = 2.000, 14.000 # span 2 = 1.979, 13.442 # span 3 = -1.1794, -0.8081 # span 4 = -1.1801, 0.2058 # span 5 = 22.717938, 22.930646 # span 6 = 22.790602, 514.130113 # span 7 = 2.2392, 2.9050 # span 8 = 89.2548, 89.6657 # span 9 = 85.8694, 87.7058 # span 10 = 5.7387e-02, 7.9845e-02 # span 11 = 0.0000, 0.0000 # span 12 = 1.0000e-12, 1.0000e-12 # span 13 = 6.5609e+02, 6.6177e+02 # span 14 = 1.29, 98.56 # span 15 = 5.89243, 24.85832 # span 16 = 24.9090, 27.9839 # span 17 = 27.2262, 99.0000 # span 18 = 0, 142 # span 19 = -1.8104, -0.8081 # span 20 = 19.9816, 22.4728 # span 21 = 1434.08, 1572.67 # span 22 = 0.0000e+00, 0.0000e+00 # interval = decibars: 1 # start_time = Aug 12 2007 19:29:55 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 03P, 5-Jan-07 (ITS90) # sensor 1 = Frequency 1 conductivity, primary, 04-2809, 9-Jan-07, cpcor = -9. 5700e-08 # sensor 2 = Frequency 2 pressure, 90559, 10/29/02 # sensor 3 = Frequency 3 temperature, secondary, 03P, 30-Decb-06 (ITS90) # sensor 4 = Frequency 4 conductivity, secondary, 2810, 9 Jan 07, cpcor = -9.5 700e-08 # sensor 5 = Extrnl Volt 0 Oxygen, SBE, primary, 435, 25 Jan 2007 # sensor 6 = Extrnl Volt 1 altimeter # sensor 7 = Extrnl Volt 2 Fluorometer, Seapoint, primary # sensor 8 = Extrnl Volt 3 transmissometer, primary, CST-662DR, 20-Mar-2003 # sensor 9 = Extrnl Volt 4 transmissometer, secondary, 993DR, Aug 28 2006 # sensor 10 = Extrnl Volt 7 irradiance (PAR), primary, QCP, 13 Mar 2007 # sensor 11 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Jun 06 2008 07:17:54, 5.31 # datcnv_in = C:\200720\ctdproc\200720_062.dat C:\200720\ctdproc\200719-0724-spa r-30jul2007_nmea_pbias22may08.con # datcnv_skipover = 11100 # alignctd_date = Jun 06 2008 07:32:52, 5.31 # alignctd_in = C:\200720\ctdproc\200720_062.cnv # alignctd_adv = sbeox0V 8.000 # wildedit_date = Jun 06 2008 07:33:37, 5.31 # wildedit_in = C:\200720\ctdproc\200720_062.cnv # wildedit_pass1_nstd = 10.0 # wildedit_pass2_nstd = 20.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 100 # wildedit_vars = prDM depSM t090C t190C c0mS/cm c1mS/cm sbeox0V xmiss xmiss1 fl SP v6 par spar altM # wildedit_excl_bad_scans = yes # celltm_date = Jun 06 2008 07:34:19, 5.31 # celltm_in = C:\200720\ctdproc\200720_062.cnv # celltm_alpha = 0.0300, 0.0300 # celltm_tau = 7.0000, 7.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # filter_date = Jun 06 2008 07:35:03, 5.31 # filter_in = C:\200720\ctdproc\200720_062.cnv # filter_low_pass_tc_A = 0.030 # filter_low_pass_tc_B = 0.150 # filter_low_pass_A_vars = c0mS/cm c1mS/cm # filter_low_pass_B_vars = prDM depSM # loopedit_date = Jun 06 2008 07:36:21, 5.31 # loopedit_in = C:\200720\ctdproc\200720_062.cnv # loopedit_minVelocity = 0.000 # loopedit_excl_bad_scans = yes # Derive_date = Jun 06 2008 07:37:26, 5.31 # Derive_in = C:\200720\ctdproc\200720_062.cnv C:\200720\ctdproc\200719-0724-spa r-30jul2007_nmea_pbias22may08.con # derive_time_window_docdt = seconds: 1 # binavg_date = Jun 06 2008 07:49:22, 5.31 # binavg_in = C:\200720\ctdproc\200720_062.cnv # binavg_bintype = decibars # binavg_binsize = 1 # binavg_excl_bad_scans = yes # binavg_skipover = 0 # binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000 # Derive_date = Jun 06 2008 07:51:55, 5.31 # Derive_in = C:\200720\ctdproc\200720_062.cnv C:\200720\ctdproc\200719-0724-spa r-30jul2007_nmea_pbias22may08.con # split_date = Jun 06 2008 07:52:19, 5.31 # split_in = C:\200720\ctdproc\200720_062.cnv # split_excl_bad_scans = yes # file_type = ascii END* CTD Data Processing Notes: -------------------------- Cast 62 has been cut short most likely due to pressure spike. Will get reprocessed at later date. For full details see report Physical and chemical data from the Canada Basin July 26 to August 31, 2007 cited below. Standard seabird processing steps and Matlab based routines were used. CTD Pressure: Lab calibration (29th Oct 2002) adjusted by applying -0.48dbar offset to the bias based on in-air surface readings of the CTD. CTD Temperature: Pre-cruise lab calibration was used after comparisons with dual sensor and post-cruise calibration information. CTD Conductivity: Pre-cruise lab calibration adjusted after comparisons with dual sensor, post-cruise calibrations and water sample data. Primary conductivity adjusted by bias of +0.0018 mS/cm . Secondary conductivity adjusted by bias of +0.0016 mS/cm. CTD Oxygen: Oxygen data are from a SeaBird SBE43 sensor with pumped flow in-line after the primary temperature and conductivity sensors. A lag of -8 seconds was applied to oxygen voltage in the Seabird processing step Align. Downcast CTD oxygen voltage and upcast temperature and salinity were used to calibrate CTD to water sample oxygen (upcast). The 107 casts required 6 calibration groups. Fitting method followed Seabirds Application Note 64-2 (“SBE 43 Dissolved Oxygen Sensor Calibration and Data Corrections using Winkler Titrations”). A remaining pressure dependent shape in the residual between water sample and CTD oxygen was removed by subtracting a mean curve. Parts of the mean curve were found by fitting sections of data from discreet pressure ranges. The parts were then stitched together via spline interpolation to create a full profile mean curve. CTD Fluorometer: Fluorometer data are from a Seapoint sensor with pumped flow in-line after the secondary temperature and conductivity sensors. Calibration with bottle data performed using bottle chlorophyll values between 0.025 and 0.60 mg/m3. The number of observations used were 116 out of 141 with a standard deviation of 0.03 in the residuals. Coefficients used: Slope: 0.7909, Bias: -0.0045. Alignment of -4 seconds was used. Frequent single dropouts in fluorescence to 0 have been fixed by setting to neighbor value. ISUS: Data are uncalibrated. The voltage is proportional to nitrate. Transmissometer data are unprocessed, using calibration from 28 Aug 2006. PAR data are unprocessed, using corrected calibration from 13 Mar 2007. Altimeter data are unprocessed, using calibration from Mar 2005. Data Notes: - Spikes in temperature, conductivity and oxygen have been linearly interpolated over and where needed secondary values (when available) have replaced the primary values. Reference: 1. McLaughlin, F., Proshutinsky, A., Carmack, E.C., Shimada, K., Brown, K., Corkum, M., Dempsey, M., Drost, H., Eert, J., Guay, C., Gueguen, C., Hutchings, J., Itoh, M., Jackson, J., Kane, T., Krishfield, R., Li, B., Lovejoy, C., Maclean, H., Nelson, J., Nelson, R., Orlich, A., Smith, J., Steel, M., White, L., Wrohan, I., and Zimmermann, S. 2017. Physical and chemical data from the Canada Basin July 26 to August 31, 2007. Can. Data Rep. Hydrogr. Ocean Sci. 189: xx + xxx p. (in preparation). *CALIBRATION $TABLE: CORRECTED CHANNELS !Name Units Fmla Pad Coefficients !--------------------------- ------------ ---- ------ ------------ Conductivity:Primary mS/cm 10 -99 () (0.18E-02 1) Conductivity:Secondary mS/cm 10 -99 () (0.16E-02 1) Fluorescence:URU:Seapoint mg/m^3 10 -99 () (-0.45E-02 0.7909) Transmissivity %/metre 10 -99 () (0.559E-01 0.525E-01) Transmissivity %/metre 10 -99 () (-1.084 19.36) PAR uE/m^2/sec 10 -99 () (0 1.5976) $END !----1---- ---2---- --3--- ---4--- ----5----- --6--- ---7--- ---8---- -9-- ----10---- !Pressure Temperat Transm Fluores PAR: Altime Oxygen: Salinity Numb Flag ! ure: issivi cence: Reference ter Dissolv :T0:C0 er_o ! Primary ty Calibra ed:SBE ~bin ! ted:Sea _rec ! point ords !--------- -------- ------ ------- ---------- ------ ------- -------- ---- ---------- *END OF HEADER 2.000 -0.8081 64.55 0.046 656.100 16.0 6.849 27.7314 142. 0.222E+03 3.000 -1.0801 65.13 0.049 657.600 23.2 6.682 27.9289 51. 0.222E+03 4.000 -1.0992 64.93 0.044 657.600 55.0 6.597 27.9422 47. 0.222E+03 5.000 -1.1688 65.32 0.045 658.200 1.3 6.523 27.9864 47. 0.222E+03 6.000 -1.1757 65.51 0.045 659.500 1.5 6.461 27.9804 47. 0.222E+03 7.000 -1.1738 65.13 0.045 659.500 2.1 6.429 27.9676 48. 0.222E+03 8.000 -1.1776 65.51 0.044 659.500 82.4 6.486 27.9526 48. 0.222E+03 9.000 -1.1794 65.51 0.044 659.500 52.5 6.686 27.9075 50. 0.222E+03 10.000 -1.1581 65.51 0.044 659.900 97.3 6.864 27.8841 55. 0.222E+03 11.000 -1.1783 65.51 0.042 661.800 98.6 8.816 27.7859 7. 0.222E+03 12.000 -1.1754 65.71 0.042 661.500 98.6 8.523 27.8004 2. 0.222E+03 13.000 -1.1753 65.71 0.042 661.500 98.6 8.532 27.7992 2. 0.222E+03 14.000 -1.1752 65.71 0.042 661.500 98.5 8.541 27.7981 1. 0.222E+03