*2014/11/20 09:55:20.13 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2006/11/29 21:57:11.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 13 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : C7D9660C NUMBER OF CHANNELS : 23 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------------------- --------------- -------------- -------------- 1 Bottle_Number n/a 1 13 2 Pressure decibar 1.9 180.2 3 Temperature:Primary 'deg C (ITS90)' 8.0999 9.3307 4 Transmissivity %/metre 18.3 48.5 5 Fluorescence:URU:Seapoint mg/m^3 0.62E-01 0.308 6 Oxygen:Dissolved:SBE mL/L 2.23 6.02 7 Oxygen:Dissolved:SBE umol/kg 97.2 262.3 8 PAR uE/m^2/sec 0 106.736 9 Salinity:T0:C0 PSS-78 30.5747 33.6167 10 Sample_Number n/a 32 44 11 Number_of_bin_records n/a 121 121 12 Salinity:Bottle PSS-78 33.6245 33.6245 13 Flag:Salinity:Bottle n/a 14 Chlorophyll:Extracted mg/m^3 0.5 0.5 15 Flag:Chlorophyll:Extracted n/a 16 Oxygen:Dissolved mL/L 2.235 6.065 17 Flag:Oxygen:Dissolved n/a 18 Nitrate_plus_Nitrite umol/L 20.5 31.1 19 Flag:Nitrate_plus_Nitrite n/a 20 Silicate umol/L 40.2 48 21 Flag:Silicate n/a 22 Phosphate umol/L 1.8 2.51 23 Flag:Phosphate n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 3 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 6 F ' ' 1 5 -99 ' ' 8 F ' ' 3 6 -99 ' ' 7 F ' ' 2 7 -99 ' ' 6 F ' ' 1 8 -99 ' ' 11 F ' ' 3 9 -99 ' ' 9 F ' ' 4 10 -99 ' ' 5 I I 0 11 ' ' ' ' 5 I I 0 12 -99 ' ' 9 F R4 4 13 0 ' ' 2 NQ C ' ' 14 -99 ' ' 7 F R4 2 15 0 ' ' 2 NQ C ' ' 16 -99 ' ' 8 F ' ' 3 17 0 ' ' 2 NQ C ' ' 18 -99 ' ' 6 F R4 1 19 0 ' ' 2 NQ C ' ' 20 -99 ' ' 6 F R4 1 21 0 ' ' 2 NQ C ' ' 22 -99 ' ' 7 F R4 2 23 0 ' ' 2 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- Comments from secondary file: Q:\Cruise_Data\2006-35\CTD\par\2006-35-0008.par -------------------------------------------------------------------------------------- This file converted from Sea-Bird file: Q:\Cruise_Data\2006-35\CTD\par\2006-3 $END *ADMINISTRATION MISSION : 2006-35 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : SoG-JdeF SCIENTIST : Masson D. PLATFORM : Vector *LOCATION GEOGRAPHIC AREA : Strait of Georgia / Juan de Fuca Strait STATION : 72 EVENT NUMBER : 8 LATITUDE : 48 18.63000 N ! (deg min) LONGITUDE : 124 4.12000 W ! (deg min) WATER DEPTH : 186 ALTIMETER (M) : 8.99 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2095 conductivity:primary ' ' 2424 pressure ' ' 63507 temperature:secondary ' ' 2668 conductivity:secondary ' ' 2399 Fluorometer ' ' Seapoint transmissometer:primary ' ' 953 Oxygen:SBE ' ' 1117 altimeter: ' ' ' ' irradiance:primary ' ' 4656 $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.29B Comments from secondary file: Q:\Cruise_Data\2006-35\CTD\par\2006-35-0008.par ----------------------------------------------- SOFTWARE VERSION SEASAVE WIN32 V 5.29B $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.0 2007/03/05 16:21:21 1573 1573 CLEAN 5.0 2007/03/05 16:28:18 ? ? ADDSAMP 3.4 2007/03/05 16:29:50 1573 1573 BINAVE 4.1.1 2007/03/05 16:30:13 1573 13 MERGE 3.3 2007/03/05 16:30:25 13 13 CLEAN 5.0 2007/03/16 15:24:48 ? ? CALIB 11.7 2007/03/16 15:25:20 13 13 SORT 3.5 2007/03/16 17:08:09 13 13 REMOVECH 7.0 2007/03/16 17:09:07 13 13 CHGUNITS 3.0 2007/03/16 17:09:48 13 13 REORDER 1.2.1 2007/03/16 17:10:00 ? ? HDREDIT2 2.5.1 2007/03/16 17:26:25 ? ? MERGE 3.3 2007/03/17 15:44:21 13 13 REORDER 1.2.1 2007/03/17 15:58:08 ? ? CHANGE_FLAGS 1.0 2013/07/16 11:48:29 13 13 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:32:44 13 13 CHANGE_FLAGS 2.0 2014/11/20 09:55:20 13 13 $END $REMARKS -CLEAN functions: 2007/03/05 16:28:18 Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data\2006-35\CTD\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2007/03/05 16:30:25 Merge Channel: Bottle_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted, Oxygen:Dissolved, Flag:Oxygen:Dissolved, Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate Primary file : Q:\Cruise_Data\2006-35\CTD\hydro\2006-35-0008.samavg Secondary file: Q:\Cruise_Data\2006-35\CTD\hydro\2006-35-0008.mrgcln1 -CLEAN functions: 2007/03/16 15:24:48 20 Remove Sea-Bird comments from the header. Remove remark heading: "Comments from secondary" -CALIB parameters: 2007/03/16 15:25:20 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2006-35\CTD\doc\2006-35-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 11 Oxygen:Dissolved:SBE mL/L 10 -0.1420000E-01 0.1010700E+01 14 Salinity:T0:C0 PSS-78 10 -0.3500000E-02 0.1000000E+01 -SORT parameters: 2007/03/16 17:08:09 Sorted in ascending order of channel Pressure -REMOVECH 2007/03/16 17:09:07 The following CHANNEL(S) were removed: Scan_Number Temperature:Secondary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Descent_Rate [m/s] Status:Pump Salinity:T1:C1 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L to umol/kg -HEADER EDITS: 2007/03/16 17:26:25 Applied edit header: Q:\Cruise_Data\2006-35\CTD\doc\2006-35-bot-hdr.txt Channel 2: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 5: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 6: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 -The following MERGE parameters were used: 2007/03/17 15:44:21 Merge Channel: Pressure Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: PAR Primary file : Q:\Cruise_Data\2006-35\CTD\par\2006-35-0008.che Secondary file: Q:\Cruise_Data\2006-35\CTD\par\2006-35-0008.par Comments from secondary file: Q:\Cruise_Data\2006-35\CTD\par\2006-35-0008.par ----------------------------------------------- -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -SORT parameters: 2007/03/17 15:40:40 Sorted in ascending order of channel Pressure $END *COMMENTS Sample_Number 44: Extracted Chlorophyll: variability>10% Sample_Number 32: Dissolved Oxygen sample outlier in COMPARE and in DO vs Salinity plot. Analysis methods: ----------------- Salinity samples are collected in glass bottles and analyzed on Guildline model 8400B Autosal Salinometers which are standardized with IAPSO standard seawater. Oxygen samples are analyzed on an automated Winkler titration system following the procedures of Carpenter (1965). A Brinkmann model 665 Dosimat and model PC910 Colorimeter is controlled by Visual-Basic program to titrate the oxygen samples. Nutrient samples were stored "COOL" and analyzed within 1 week using a Technicon AAII autoanalyzer following methods described in Barwell-Clarke and Whitney (1996). Chlorophyll samples are collected in duplicate in calibrated polycarbonate bottles (~330ml), then filtered onto 25mm MFS GF/75 filters at <70mmHg vacuum. The filters are placed in glass scintillation vials and immediately frozen at -20ºC until analysis. The chlorophyll is extracted in 10 ml of 90% acetone for 24h at -20ºC, then brought to room temperature and the extract is decanted and measured using a Turner Designs 10-AU-005-CE fluorometer, which has been calibrated with solutions of commercially prepared chlorophyll. Average of two samples is reported. Variability is assessed as the % (std dev/mean*100). For this cruise the samples were kept frozen for several weeks. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. J. Barwell-Clarke and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. Comments from secondary file: Q:\Cruise_Data\2006-35\CTD\par\2006-35-0008.par ----------------------------------------------- SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\Data\2006-35\2006-35-0008.dat Software Version Seasave Win32 V 5.29b Temperature SN = 2095 Conductivity SN = 2424 Number of Bytes Per Scan = 30 Number of Voltage Words = 4 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Nov 29 2006 20:57:15 NMEA Latitude = 48 18.63 N NMEA Longitude = 124 04.12 W NMEA UTC (Time) = Nov 29 2006 21:57:11 Store Lat/Lon Data = Add to Header Only Ship: vector Vector Cruise:2006-35 2006-35 Station: 72 Latitude: Longitude: Depth: 186 # nquan = 5 # nvalues = 1573 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = par: PAR/Irradiance, Biospherical/Licor # name 3 = nbf: number of bottles fired # name 4 = flag: 0.000e+00 # interval = seconds: 0.0416667 # start_time = Nov 29 2006 20:57:15 # sensor 0 = Frequency 0 temperature, primary, 2095, 31-May-06 # sensor 1 = Frequency 1 conductivity, primary, 2424, 23-May-06, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 2668, 18-May-06 # sensor 4 = Frequency 4 conductivity, secondary, 2399, 23-May-06, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 953, 21-Mar-06 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 1117, 17-Oct-06 # sensor 8 = Extrnl Volt 4 altimeter # sensor 9 = Extrnl Volt 6 irradiance (PAR), primary, 4656, 11-Feb-03 # datcnv_date = Mar 17 2007 15:28:03, 5.37e # datcnv_in = Q:\Cruise_Data\2006-35\CTD\2006-35-0008.dat Q:\Cruise_Data\2006-35 \CTD\2006-35-ctd.CON # datcnv_bottle_scan_range_source = BL file END* *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- -------- ---- ------ ------------ Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.142E-01 1.0107) Salinity:T0:C0 PSS-78 10 -99 () (-0.35E-02 1) $END !1- --2--- ---3---- --4-- ---5--- --6--- --7-- ----8----- ---9---- -10- -11- ---12--- - --14-- - ---16-- - --18- - --20- - --22-- - !Bo Pressu Temperat Trans Fluores Oxygen Oxyge PAR Salinity Samp Numb Salinity F Chloro F Oxygen: F Nitra F Silic F Phosph F !tt re ure: missi cence: : n: :T0:C0 le_ er_o :Bottle l phyll: l Dissolv l te_ l ate l ate l !~u Primary vity URU: Dissol Disso Numb ~bin ~ Extrac ~ ed ~ plus_ ~ ~ ~ !mb Seapoin ved: lved: er _rec l ted e e Nitri t t t !er t SBE SBE ords e d d te e e e !-- ------ -------- ----- ------- ------ ----- ---------- -------- ---- ---- -------- - ------ - ------- - ----- - ----- - ------ - *END OF HEADER 13 1.9 8.0999 42.1 0.308 6.02 262.3 106.736 30.5747 44 121 -99.0000 0 0.50 3 6.065 0 20.5 0 40.2 0 1.80 0 12 5.4 8.1119 42.1 0.303 5.97 260.1 43.797 30.5777 43 121 -99.0000 0 -99.00 0 5.978 0 20.6 0 42.3 0 1.81 0 11 11.0 8.4632 42.8 0.213 5.59 243.7 16.150 30.8731 42 121 -99.0000 0 -99.00 0 5.623 0 22.7 0 42.5 0 1.94 0 10 21.0 8.5344 42.7 0.192 5.50 239.6 2.633 30.9562 41 121 -99.0000 0 -99.00 0 5.508 0 23.2 0 43.3 0 1.98 0 9 30.5 8.7829 44.3 0.175 5.27 229.9 0.467 31.0471 40 121 -99.0000 0 -99.00 0 5.435 0 23.8 0 43.7 0 2.03 0 8 40.2 8.8552 44.8 0.156 5.11 222.9 0.081 31.0979 39 121 -99.0000 0 -99.00 0 5.224 0 24.1 0 44.2 0 2.08 0 7 50.0 9.3307 48.5 0.095 4.62 201.3 0.010 31.3869 38 121 -99.0000 0 -99.00 0 4.720 0 23.5 0 42.8 0 2.01 0 6 74.3 9.0242 42.5 0.075 3.83 166.9 0.000 32.0237 37 121 -99.0000 0 -99.00 0 3.952 0 28.3 6 47.4 6 2.31 6 5 100.1 8.5460 31.4 0.068 2.73 118.8 0.000 32.8973 36 121 -99.0000 0 -99.00 0 2.749 0 30.6 0 48.0 0 2.49 0 4 125.2 8.2785 25.8 0.069 2.23 97.2 0.000 33.4570 35 121 -99.0000 0 -99.00 0 2.244 0 31.1 0 46.8 0 2.47 0 3 150.4 8.3761 23.9 0.062 2.24 97.4 0.000 33.6040 34 121 -99.0000 0 -99.00 0 2.235 0 30.9 0 44.3 0 2.49 0 2 175.1 8.3895 21.3 0.068 2.24 97.7 0.000 33.6167 33 121 33.6245 0 -99.00 0 2.242 0 30.8 0 43.9 0 2.48 0 1 180.2 8.3891 18.3 0.071 2.25 97.9 0.000 33.6163 32 121 -99.0000 0 -99.00 0 3.041 3 30.6 0 43.6 0 2.51 0