*2014/11/20 09:55:02.09 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2005/12/02 00:39:47.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 10 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 6FB8C50C NUMBER OF CHANNELS : 22 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- --------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 248 257 2 Pressure decibar 1.2 152.6 3 Temperature:Primary 'deg C (ITS90)' 8.7829 9.8564 4 Salinity:T0:C0 PSS-78 29.1233 30.8389 5 Transmissivity %/metre 50.1 52.3 6 Fluorescence:URU:Seapoint mg/m^3 0.93E-01 0.741 7 Oxygen:Dissolved:SBE mL/L 2.67 4.59 8 Oxygen:Dissolved:SBE umol/kg 116.7 200.3 9 PAR uE/m^2/sec 0.5 4.5 10 PAR:Reference uE/m^2/sec 31.1 31.1 11 Bottle_Number n/a 1 10 12 Number_of_bin_records n/a 121 121 13 Salinity:Bottle PSS-78 30.6064 30.6064 14 Flag:Salinity:Bottle n/a 15 Nitrate_plus_Nitrite umol/L 27.1 29.1 16 Flag:Nitrate_plus_Nitrite n/a 17 Silicate umol/L 54.6 57 18 Flag:Silicate n/a 19 Phosphate umol/L 2.23 2.62 20 Flag:Phosphate n/a 21 Oxygen:Dissolved mL/L 2.692 4.585 22 Flag:Oxygen:Dissolved n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 7 F ' ' 2 8 -99 ' ' 6 F ' ' 1 9 -99 ' ' 7 F ' ' 1 10 -99 ' ' 7 F ' ' 1 11 -99 ' ' 3 I I 0 12 ' ' ' ' 5 I I 0 13 -99 ' ' 9 F R4 4 14 0 ' ' 2 NQ C ' ' 15 -99 ' ' 6 F R4 1 16 0 ' ' 2 NQ C ' ' 17 -99 ' ' 6 F R4 1 18 0 ' ' 2 NQ C ' ' 19 -99 ' ' 7 F R4 2 20 0 ' ' 2 NQ C ' ' 21 -99 ' ' 8 F ' ' 3 22 0 ' ' 2 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2005-32 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : JdeF/SoG SCIENTIST : Masson D. PLATFORM : Vector *LOCATION GEOGRAPHIC AREA : JdeF/SoG STATION : 16 EVENT NUMBER : 67 LATITUDE : 49 57.71000 N ! (deg min) LONGITUDE : 125 8.79000 W ! (deg min) WATER DEPTH : 156 ALTIMETER (M) : 2.66 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2968 conductivity:primary ' ' 1766 pressure ' ' 63507 temperature:secondary ' ' 2106 conductivity:secondary ' ' 1729 Fluorometer ' ' Seapoint transmissometer:primary ' ' 498DR Oxygen:SBE ' ' 0047 altimeter: ' ' ' ' irradiance:primary ' ' 4656 surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.35 Comments from secondary file: Q:\Cruise_Data\2005-32\ctd\hydro\2005-32-0067.addsort ----------------------------------------------------- Dissolved oxygen concentration determined using an automated titration system consisting of a Brinkman dosimat (model 665) and a PC 900 Colorimeter. $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.0 2006/03/21 15:59:20 1210 1210 CLEAN 4.8.1 2006/03/21 16:00:46 ? ? ADDSAMP 3.4 2006/03/22 17:09:34 1210 1210 BINAVE 4.1 2006/03/22 17:15:47 1210 10 MERGE 3.3 2006/04/03 17:32:39 10 10 MERGE 3.3 2006/04/03 17:33:15 10 10 MERGE 3.3 2006/04/03 17:36:21 10 10 MERGE 3.3 2006/04/03 17:37:56 10 10 CALIB 11.7 2006/04/10 11:37:01 10 10 CLEAN 4.8.1 2006/04/11 13:13:21 ? ? SORT 3.5 2006/04/11 13:13:42 10 10 REMOVECH 7.0 2006/04/11 13:18:45 10 10 CHGUNITS 2.1 2006/04/11 13:19:16 10 10 REORDER 1.2.1 2006/04/11 13:19:44 ? ? HDREDIT2 2.5.1 2006/04/11 13:23:31 ? ? MERGE 3.3 2006/04/18 14:44:30 10 10 HDREDIT2 2.5.1 2006/06/06 16:00:30 ? ? HDREDIT2 2.5.1 2006/12/12 18:02:48 ? ? CHANGE_FLAGS 1.0 2013/07/16 11:48:16 10 10 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:32:20 10 10 CHANGE_FLAGS 2.0 2014/11/20 09:55:02 10 10 $END $REMARKS -CLEAN functions: 2006/03/21 16:00:10 20 Change Pad Value to -99 in Channel: Oxygen:Dissolved:SBE [mL/L] Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data\2005-32\CTD\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2006/04/03 17:32:37 2006/04/03 17:32:38 2006/04/03 17:32: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0067.samavg Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0067.sal -MERGE *** Secondary file not found *** Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0067.mrg1 Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0067.chl -MERGE *** Secondary file not found *** Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0067.mrg2 Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0067.add -The following MERGE parameters were used: 2006/04/03 17:37:54 2006/04/03 17:37:55 2006/04/03 17:37: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Nitrate, Flag:Nitrate, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0067.mrg3 Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0067.nuts -CALIB parameters: 2006/04/10 11:37:01 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2005-32\CTD\doc\2005-32-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 13 Oxygen:Dissolved:SBE mL/L 10 -0.3200000E-01 0.1461400E+01 17 Salinity:T0:C0 PSS-78 10 -0.4700000E-02 0.1000000E+01 -CLEAN functions: 2006/04/11 13:13:20 20 Change Pad Value to -99 in Channel: Oxygen:Dissolved:SBE [mL/L] Remove Sea-Bird comments from the header. -SORT parameters: 2006/04/11 13:13:42 Sorted in ascending order of channel Pressure [dbars] -REMOVECH 2006/04/11 13:18:45 The following CHANNEL(S) were removed: Scan_Number Temperature:Secondary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Altimeter [metres] Descent_Rate [m/s] Status:Pump Salinity:T1:C1 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2006/04/11 13:23:31 Applied edit header: Q:\Cruise_Data\2005-32\CTD\doc\2005-32-bot-hdr.txt Channel 2: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 6: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 7: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 9: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 10: PAR:Reference [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 15: Nitrate [umol/L] Units: ==> umol/L Channel 17: Silicate [umol/L] Units: ==> umol/L Channel 19: Phosphate [umol/L] Units: ==> umol/L -The following MERGE parameters were used: 2006/04/18 14:44:30 2006/04/18 14:44:30 Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Oxygen:Dissolved, Flag:Oxygen:Dissolved Primary file : Q:\Cruise_Data\2005-32\ctd\hydro\2005-32-0067.che Secondary file: Q:\Cruise_Data\2005-32\ctd\hydro\2005-32-0067.addsort Comments from secondary file: Q:\Cruise_Data\2005-32\ctd\hydro\2005-32-0067.addsort ----------------------------------------------------- C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' -SORT parameters: 2006/04/18 14:43:36 Sorted in ascending order of channel Pressure -HEADER EDITS: 2006/06/06 16:00:30 Channel 15: Nitrate_plus_Nitrite [umol/L] Name: Nitrate ==> Nitrate_plus_Nitrite Pad: ' ' ==> -99 Channel 16: Flag:Nitrate_plus_Nitrite [] Name: Flag:Nitrate ==> Flag:Nitrate_plus_Nitrite -HEADER EDITS: 2006/12/12 18:02:48 Applied edit header: Q:\Cruise_Data\Bottle Header Fix\fix-hdr-qual.txt $END *COMMENTS -------------------------------------------------------------------------------------------------- Sample_Number 250: Salinity samples consistently differ from both CTD channels by about 0.05; the analyst reports a likely error in the use of the salinometer. Analysis methods: ----------------- Salinity samples are collected in glass bottles and analyzed on a Guildline Autosal 8400 Salinometer which was standardized with IAPSO standard seawater. Oxygen samples are analyzed on an automated Winkler titration system following the procedures of Carpenter (1965). A Brinkmann model 665 Dosimat and model PC910 Colorimeter is controlled by Visual-Basic program to titrate the oxygen samples. Nutrient samples are analyzed frozen using a Technicon AAII autoanalyzer following methods described in Barwell-Clarke and Whitney (1996). Chlorophyll samples are collected in duplicate in calibrated polycarbonate bottles (~330ml), then filtered onto 25mm MFS GF/75 filters at <70mmHg vacuum. The filters are placed in glass scintillation vials and immediately frozen at -20ºC until analysis. The chlorophyll is extracted in 10 ml of 90% acetone for 24h at -20ºC, then brought to room temperature and the extract is decanted and measured using a Turner Designs 10-AU-005-CE fluorometer, which has been calibrated with solutions of commercially prepared chlorophyll. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. J. Barwell-Clarke and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. ------------------------------------------------------------------------------ *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- -------- ---- ------ ------------ Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.32E-01 1.4614) Salinity:T0:C0 PSS-78 10 -99 () (-0.47E-02 1) $END !-1-- --2--- ---3---- ---4---- --5-- ---6--- --7--- --8-- --9--- --10-- 11 -12- ---13--- - --15- - --17- - --19-- - ---21-- - !Samp Pressu Temperat Salinity Trans Fluores Oxygen Oxyge PAR PAR: Bo Numb Salinity F Nitra F Silic F Phosph F Oxygen: F !le_ re ure: :T0:C0 missi cence: : n: Refere tt er_o :Bottle l te_ l ate l ate l Dissolv l !Numb Primary vity URU: Dissol Disso nce ~u ~bin ~ plus_ ~ ~ ~ ed ~ !er Seapoin ved: lved: mb _rec l Nitri t t t e ! t SBE SBE er ords e te e e e d !---- ------ -------- -------- ----- ------- ------ ----- ------ ------ -- ---- -------- - ----- - ----- - ------ - ------- - *END OF HEADER 257 1.2 8.7829 29.1233 52.3 0.735 4.59 200.3 4.5 31.1 10 121 -99.0000 0 27.2 0 56.3 0 2.40 0 4.585 0 256 5.6 8.7880 29.1378 52.2 0.741 4.58 200.1 0.8 31.1 9 121 -99.0000 0 27.1 0 56.2 0 2.39 0 4.572 0 255 10.6 8.8010 29.1597 52.2 0.704 4.42 193.1 0.6 31.1 8 121 -99.0000 0 27.6 0 56.3 0 2.35 0 4.415 0 254 20.8 9.1682 29.6799 52.2 0.462 3.93 171.4 0.5 31.1 7 121 -99.0000 0 28.2 0 56.8 0 2.43 0 3.922 0 253 30.6 9.1740 29.6883 52.1 0.469 3.90 170.1 0.5 31.1 6 121 -99.0000 0 28.1 0 56.8 0 2.23 0 3.769 0 252 50.8 9.4172 30.0678 52.0 0.328 3.46 151.0 0.5 31.1 5 121 -99.0000 0 28.6 0 56.9 0 2.56 0 3.420 0 251 75.1 9.4209 30.0703 52.1 0.324 3.46 150.9 0.5 31.1 4 121 -99.0000 0 27.9 0 55.7 0 2.54 0 3.440 0 250 101.1 9.7036 30.5111 52.1 0.166 2.93 127.8 0.5 31.1 3 121 30.6064 4 28.2 0 54.6 0 2.61 0 2.897 0 249 125.5 9.8468 30.7900 52.1 0.101 2.74 119.4 0.5 31.1 2 121 -99.0000 0 28.1 0 55.2 0 2.51 0 2.721 0 248 152.6 9.8564 30.8389 50.1 0.093 2.67 116.7 0.5 31.1 1 121 -99.0000 0 29.1 0 57.0 0 2.62 0 2.692 0