*2014/11/20 09:55:01.90 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2005/12/01 14:10:27.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 12 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII CRC : 109BC69E NUMBER OF CHANNELS : 24 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 194 205 2 Pressure decibar 1.8 191.5 3 Temperature:Primary 'deg C (ITS90)' 8.2034 9.9336 4 Salinity:T0:C0 PSS-78 27.9773 31.1271 5 Transmissivity %/metre 49.7 56.6 6 Oxygen:Dissolved:SBE mL/L 1.9 4.35 7 Oxygen:Dissolved:SBE umol/kg 83.1 189.9 8 PAR uE/m^2/sec 0.5 2.2 9 PAR:Reference uE/m^2/sec 31.1 31.1 10 Bottle_Number n/a 1 12 11 Number_of_bin_records n/a 121 121 12 Salinity:Bottle PSS-78 30.9905 30.9905 13 Flag:Salinity:Bottle n/a 14 Chlorophyll:Extracted mg/m^3 0.38 0.54 15 Flag:Chlorophyll:Extracted n/a 16 Oxygen:Dissolved mL/L 2.766 6.323 17 Flag:Oxygen:Dissolved n/a 18 Nitrate_plus_Nitrite umol/L 20.9 29.8 19 Flag:Nitrate_plus_Nitrite n/a 20 Silicate umol/L 41.1 58.9 21 Flag:Silicate n/a 22 Phosphate umol/L 2.01 2.6 23 Flag:Phosphate n/a 24 Fluorescence:URU:Seapoint mg/m^3 0.79E-01 1.126 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 6 F ' ' 1 6 -99 ' ' 7 F ' ' 2 7 -99 ' ' 6 F ' ' 1 8 -99 ' ' 7 F ' ' 1 9 -99 ' ' 7 F ' ' 1 10 -99 ' ' 3 I I 0 11 ' ' ' ' 5 I I 0 12 -99 ' ' 9 F R4 4 13 0 ' ' 2 NQ C ' ' 14 -99 ' ' 7 F R4 2 15 0 ' ' 2 NQ C ' ' 16 -99 ' ' 8 F ' ' 3 17 0 ' ' 2 NQ C ' ' 18 -99 ' ' 6 F R4 1 19 0 ' ' 2 NQ C ' ' 20 -99 ' ' 6 F R4 1 21 0 ' ' 2 NQ C ' ' 22 -99 ' ' 7 F R4 2 23 0 ' ' 2 NQ C ' ' 24 -99 ' ' 8 F ' ' 3 $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- Comments from secondary file: Q:\Cruise_Data_Processing\Archive-updates\2005-32\2005-32-0056.che2 -------------------------------------------------------------------------------------- Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2005-32 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : JdeF/SoG SCIENTIST : Masson D. PLATFORM : Vector *LOCATION GEOGRAPHIC AREA : JdeF/SoG STATION : 6 EVENT NUMBER : 56 LATITUDE : 49 30.62000 N ! (deg min) LONGITUDE : 124 27.72000 W ! (deg min) WATER DEPTH : 195 ALTIMETER (M) : 3.83 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. Comments from secondary file: Q:\Cruise_Data_Processing\Archive-updates\2005-32\2005-32-0056.che2 ------------------------------------------------------------------- Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2968 conductivity:primary ' ' 1766 pressure ' ' 63507 temperature:secondary ' ' 2106 conductivity:secondary ' ' 1729 Fluorometer ' ' Seapoint transmissometer:primary ' ' 498DR Oxygen:SBE ' ' 0047 altimeter: ' ' ' ' irradiance:primary ' ' 4656 surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.35 Comments from secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.add ------------------------------------------------- Dissolved oxygen concentration determined using an automated titration system consisting of a Brinkman dosimat (model 665) and a PC 900 Colorimeter. Comments from secondary file: Q:\Cruise_Data_Processing\Archive-updates\2005-32\2005-32-0056.che2 ------------------------------------------------------------------- SOFTWARE VERSION SEASAVE WIN32 V 5.35 Comments from secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.add ------------------------------------------------- Dissolved oxygen concentration determined using an automated titration system consisting of a Brinkman dosimat (model 665) and a PC 900 Colorimeter. $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 3.0 2006/03/21 15:59:12 1452 1452 CLEAN 4.8.1 2006/03/21 16:00:39 ? ? ADDSAMP 3.4 2006/03/22 17:09:25 1452 1452 BINAVE 4.1 2006/03/22 17:15:44 1452 12 MERGE 3.3 2006/04/03 17:32:39 12 12 MERGE 3.3 2006/04/03 17:33:15 12 12 MERGE 3.3 2006/04/03 17:36:21 12 12 MERGE 3.3 2006/04/03 17:37:56 12 12 MERGE 3.3 2006/04/18 12:10:29 12 12 CLEAN 4.8.1 2006/04/18 13:34:48 ? ? SORT 3.5 2006/04/18 13:35:15 12 12 REMOVECH 7.0 2006/04/18 13:36:37 12 12 CHGUNITS 2.1 2006/04/18 13:40:17 12 12 REORDER 1.2.1 2006/04/18 13:43:56 ? ? HDREDIT2 2.5.1 2006/04/18 13:45:57 ? ? HDREDIT2 2.5.1 2006/06/06 16:00:21 ? ? HDREDIT2 2.5.1 2006/12/12 18:02:47 ? ? MERGE 3.3 2008/05/14 13:33:14 12 12 CHANGE_FLAGS 1.0 2013/07/16 11:48:16 12 12 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:32:20 12 12 CHANGE_FLAGS 2.0 2014/11/20 09:55:01 12 12 $END $REMARKS -CLEAN functions: 2006/03/21 16:00:10 20 Change Pad Value to -99 in Channel: Oxygen:Dissolved:SBE [mL/L] Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data\2005-32\CTD\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2006/04/03 17:32:37 2006/04/03 17:32:38 2006/04/03 17:32: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.samavg Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.sal -The following MERGE parameters were used: 2006/04/03 17:33:14 2006/04/03 17:33:14 2006/04/03 17:33: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Chlorophyll:Extracted, Flag:Chlorophyll:Extracted Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.mrg1 Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.chl -The following MERGE parameters were used: 2006/04/03 17:36:20 2006/04/03 17:36:20 2006/04/03 17:36: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Oxygen:Dissolved, Flag:Oxygen:Dissolved Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.mrg2 Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.add Comments from secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.add ------------------------------------------------- C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' -The following MERGE parameters were used: 2006/04/03 17:37:54 2006/04/03 17:37:55 2006/04/03 17:37: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Nitrate, Flag:Nitrate, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.mrg3 Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.nuts -The following MERGE parameters were used: 2006/04/18 12:10:29 Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Chlorophyll:Extracted Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.mrg Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.chl -CLEAN functions: 2006/04/18 13:34:48 Remove Sea-Bird comments from the header. -SORT parameters: 2006/04/18 13:35:15 Sorted in ascending order of channel Pressure -REMOVECH 2006/04/18 13:36:37 The following CHANNEL(S) were removed: Scan_Number Temperature:Secondary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Altimeter [metres] Descent_Rate [m/s] Status:Pump Salinity:T1:C1 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2006/04/18 13:45:57 Applied edit header: Q:\Cruise_Data\2005-32\CTD\doc\2005-32-bot-hdr.txt Channel 2: Pressure [decibar] Units: dbars ==> decibar Channel 6: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 18: Nitrate [umol/L] Units: ==> umol/L Channel 20: Silicate [umol/L] Units: ==> umol/L Channel 22: Phosphate [umol/L] Units: ==> umol/L -HEADER EDITS: 2006/06/06 16:00:21 Channel 18: Nitrate_plus_Nitrite [umol/L] Name: Nitrate ==> Nitrate_plus_Nitrite Pad: ' ' ==> -99 Channel 19: Flag:Nitrate_plus_Nitrite [] Name: Flag:Nitrate ==> Flag:Nitrate_plus_Nitrite -HEADER EDITS: 2006/12/12 18:02:47 Applied edit header: Q:\Cruise_Data\Bottle Header Fix\fix-hdr-qual.txt -The following MERGE parameters were used: 2008/05/14 13:33:13 2008/05/14 13:33:13 2008/05/14 13:33: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Fluorescence:URU:Seapoint Primary file : Q:\Cruise_Data_Processing\Archive-updates\2005-32\2005-32-0056.che1 Secondary file: Q:\Cruise_Data_Processing\Archive-updates\2005-32\2005-32-0056.che2 Comments from secondary file: Q:\Cruise_Data_Processing\Archive-updates\2005-32\2005-32-0056.che2 ------------------------------------------------------------------- -CLEAN functions: 2006/03/21 16:00:10 20 Change Pad Value to -99 in Channel: Oxygen:Dissolved:SBE [mL/L] Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data\2005-32\CTD\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: 2006/04/03 17:32:37 2006/04/03 17:32:38 2006/04/03 17:32: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.samavg Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.sal -The following MERGE parameters were used: 2006/04/03 17:33:14 2006/04/03 17:33:14 2006/04/03 17:33: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Chlorophyll:Extracted, Flag:Chlorophyll:Extracted Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.mrg1 Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.chl -The following MERGE parameters were used: 2006/04/03 17:36:20 2006/04/03 17:36:20 2006/04/03 17:36: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Oxygen:Dissolved, Flag:Oxygen:Dissolved Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.mrg2 Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.add Comments from secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.add ------------------------------------------------- C.H. Culbertson's paper on Dissolved Oxygen in the 'Woce Hydrographic Program Operations and Methods - July 1991' -The following MERGE parameters were used: 2006/04/03 17:37:54 2006/04/03 17:37:55 2006/04/03 17:37: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Nitrate, Flag:Nitrate, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate Primary file : Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.mrg3 Secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.nuts -CALIB parameters: 2006/04/10 11:37:00 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2005-32\CTD\doc\2005-32-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 13 Oxygen:Dissolved:SBE mL/L 10 -0.3200000E-01 0.1461400E+01 17 Salinity:T0:C0 PSS-78 10 -0.4700000E-02 0.1000000E+01 -CLEAN functions: 2006/04/11 13:13:20 20 Change Pad Value to -99 in Channel: Oxygen:Dissolved:SBE [mL/L] Remove Sea-Bird comments from the header. -SORT parameters: 2006/04/11 13:13:42 Sorted in ascending order of channel Pressure [dbars] -REMOVECH 2006/04/11 13:18:45 The following CHANNEL(S) were removed: Scan_Number Temperature:Secondary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Altimeter [metres] Descent_Rate [m/s] Status:Pump Salinity:T1:C1 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2006/04/11 13:23:30 Applied edit header: Q:\Cruise_Data\2005-32\CTD\doc\2005-32-bot-hdr.txt Channel 2: Pressure [decibar] Units: dbars ==> decibar Format: F11.2 ==> F7.1 Channel 6: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 7: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 9: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 10: PAR:Reference [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 18: Nitrate [umol/L] Units: ==> umol/L Channel 20: Silicate [umol/L] Units: ==> umol/L Channel 22: Phosphate [umol/L] Units: ==> umol/L $END *COMMENTS Comments from secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.chl ------------------------------------------------- Average of two samples is reported. Variability is assessed as the % (std dev/mean*100). Comments from secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.add ------------------------------------------------- Oxygen sample #202 is not reported. The Autooxy Win 98 ver. froze and data was lost for this sample. Sample_Number 195: Salinity samples consistently differ from both CTD channels by about 0.05; the analyst reports a likely error in the use of the salinometer. Comments from secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.chl ------------------------------------------------- Average of two samples is reported. Variability is assessed as the % (std dev/mean*100). Analysis methods: ----------------- Salinity samples are collected in glass bottles and analyzed on a Guildline Autosal 8400 Salinometer which was standardized with IAPSO standard seawater. Oxygen samples are analyzed on an automated Winkler titration system following the procedures of Carpenter (1965). A Brinkmann model 665 Dosimat and model PC910 Colorimeter is controlled by Visual-Basic program to titrate the oxygen samples. Nutrient samples are analyzed frozen using a Technicon AAII autoanalyzer following methods described in Barwell-Clarke and Whitney (1996). Chlorophyll samples are collected in duplicate in calibrated polycarbonate bottles (~330ml), then filtered onto 25mm MFS GF/75 filters at <70mmHg vacuum. The filters are placed in glass scintillation vials and immediately frozen at -20ºC until analysis. The chlorophyll is extracted in 10 ml of 90% acetone for 24h at -20ºC, then brought to room temperature and the extract is decanted and measured using a Turner Designs 10-AU-005-CE fluorometer, which has been calibrated with solutions of commercially prepared chlorophyll. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. J. Barwell-Clarke and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. ------------------------------------------------------------------------------ Comments from secondary file: Q:\Cruise_Data_Processing\Archive-updates\2005-32\2005-32-0056.che2 ------------------------------------------------------------------- Comments from secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.chl ------------------------------------------------- Average of two samples is reported. Variability is assessed as the % (std dev/mean*100). Comments from secondary file: Q:\Cruise_Data\2005-32\CTD\hydro\2005-32-0056.add ------------------------------------------------- Oxygen sample #202 is not reported. The Autooxy Win 98 ver. froze and data was lost for this sample. Sample_Number 195: Salinity samples consistently differ from both CTD channels by about 0.05; the analyst reports a likely error in the use of the salinometer. Analysis methods: ----------------- Salinity samples are collected in glass bottles and analyzed on a Guildline Autosal 8400 Salinometer which was standardized with IAPSO standard seawater. Oxygen samples are analyzed on an automated Winkler titration system following the procedures of Carpenter (1965). A Brinkmann model 665 Dosimat and model PC910 Colorimeter is controlled by Visual-Basic program to titrate the oxygen samples. Nutrient samples are analyzed frozen using a Technicon AAII autoanalyzer following methods described in Barwell-Clarke and Whitney (1996). Chlorophyll samples are collected in duplicate in calibrated polycarbonate bottles (~330ml), then filtered onto 25mm MFS GF/75 filters at <70mmHg vacuum. The filters are placed in glass scintillation vials and immediately frozen at -20ºC until analysis. The chlorophyll is extracted in 10 ml of 90% acetone for 24h at -20ºC, then brought to room temperature and the extract is decanted and measured using a Turner Designs 10-AU-005-CE fluorometer, which has been calibrated with solutions of commercially prepared chlorophyll. References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. J. Barwell-Clarke and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. ------------------------------------------------------------------------------ !-1-- --2--- ---3---- ---4---- --5-- --6--- --7-- --8--- --9--- 10 -11- ---12--- - --14-- - ---16-- - --18- - --20- - --22-- - ---24-- !Samp Pressu Temperat Salinity Trans Oxygen Oxyge PAR PAR: Bo Numb Salinity F Chloro F Oxygen: F Nitra F Silic F Phosph F Fluores !le_ re ure: :T0:C0 missi : n: Refere tt er_o :Bottle l phyll: l Dissolv l te_ l ate l ate l cence: !Numb Primary vity Dissol Disso nce ~u ~bin ~ Extrac ~ ed ~ plus_ ~ ~ ~ URU: !er ved: lved: mb _rec l ted e e Nitri t t t Seapoin ! SBE SBE er ords e d d te e e e t !---- ------ -------- -------- ----- ------ ----- ------ ------ -- ---- -------- - ------ - ------- - ----- - ----- - ------ - ------- *END OF HEADER 205 1.8 8.2034 27.9773 55.1 4.35 189.9 2.2 31.1 12 121 -99.0000 0 0.54 0 6.323 0 25.8 0 53.1 0 2.20 0 1.126 204 5.5 8.4518 28.0484 56.2 4.27 186.4 0.8 31.1 11 121 -99.0000 0 0.41 0 6.190 0 24.9 0 50.9 0 2.01 0 0.882 203 10.7 8.5994 28.1371 56.6 4.21 184.0 0.6 31.1 10 121 -99.0000 0 0.38 0 6.123 0 21.4 0 43.9 0 2.24 0 0.819 202 20.4 8.8601 28.3853 56.2 4.07 177.6 0.5 31.1 9 121 -99.0000 0 -99.00 0 -99.000 0 25.5 0 51.7 0 2.32 0 0.774 201 30.0 9.0696 28.7033 56.0 3.42 149.4 0.5 31.1 8 121 -99.0000 0 -99.00 0 4.883 0 22.5 0 46.5 0 2.40 0 0.545 200 50.3 9.5524 29.4051 55.6 2.50 109.3 0.5 31.1 7 121 -99.0000 0 -99.00 0 3.480 0 28.9 0 58.9 0 2.52 0 0.158 199 75.2 9.7540 30.2462 54.4 1.99 86.9 0.5 31.1 6 121 -99.0000 0 -99.00 0 2.766 0 29.8 0 58.1 0 2.42 0 0.102 198 100.2 9.9336 30.6685 53.5 2.03 88.5 0.5 31.1 5 121 -99.0000 0 -99.00 0 2.946 0 29.0 0 52.4 0 2.43 0 0.087 197 125.2 9.9161 30.8251 51.0 1.99 87.0 0.5 31.1 4 121 -99.0000 0 -99.00 0 2.856 0 28.8 0 53.8 0 2.60 0 0.083 196 150.3 9.8984 30.9443 51.0 1.98 86.2 0.5 31.1 3 121 -99.0000 0 -99.00 0 2.886 0 27.2 0 51.7 0 2.24 0 0.082 195 175.4 9.8842 30.9837 50.8 1.96 85.4 0.5 31.1 2 121 30.9905 4 -99.00 0 2.846 0 20.9 0 41.1 0 2.54 0 0.081 194 191.5 9.8425 31.1271 49.7 1.90 83.1 0.5 31.1 1 121 -99.0000 0 -99.00 0 2.804 0 28.1 0 55.5 0 2.47 0 0.079