*2014/11/20 09:54:48.27 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2005/06/08 03:42:58.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 13 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII NUMBER OF CHANNELS : 17 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 230 242 2 Pressure decibar 0.8 200.5 3 Temperature:Primary 'deg C (ITS90)' 4.4161 10.3803 4 Transmissivity %/metre 25.9 61.8 5 Salinity:T0:C0 PSS-78 32.5069 33.7654 6 Bottle_Number n/a 1 13 7 Number_of_bin_records n/a 121 121 8 Nitrate_plus_Nitrite umol/L 7.7 34.5 9 Flag:Nitrate_plus_Nitrite n/a 10 Silicate umol/L 3.6 64.7 11 Flag:Silicate n/a 12 Phosphate umol/L 0.99 2.54 13 Flag:Phosphate n/a 14 Chlorophyll:Extracted mg/m^3 0.4E-01 0.5 15 Flag:Chlorophyll:Extracted n/a 16 Dimethyl_Sulphide nmol/L 0 3.62 17 Flag:Dimethyl_Sulphide n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 6 F ' ' 1 5 -99 ' ' 9 F ' ' 4 6 -99 ' ' 3 I I 0 7 ' ' ' ' 5 I I 0 8 -99 ' ' 6 F R4 1 9 0 ' ' 2 NQ C ' ' 10 -99 ' ' 6 F R4 1 11 0 ' ' 2 NQ C ' ' 12 -99 ' ' 7 F R4 2 13 0 ' ' 2 NQ C ' ' 14 -99 ' ' 7 F R4 2 15 0 ' ' 2 NQ C ' ' 16 -99 ' ' ' ' F7.2 R4 ' ' 17 0 ' ' 2 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2005-12 AGENCY : IOS, Ocean Sciences Division, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : P 26/2ND D EVENT NUMBER : 50 LATITUDE : 49 59.99000 N ! (deg min) LONGITUDE : 145 0.03000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 4484 conductivity:primary ' ' 3038 pressure ' ' 63507 temperature:secondary ' ' 2023 conductivity:secondary ' ' 2399 Fluorometer ' ' Seapoint transmissometer:primary ' ' 732DR Oxygen:SBE ' ' 0047 $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.32 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.9 2005/07/16 14:21:43 1573 1573 ADDSAMP 3.4 2005/07/18 16:35:57 1573 1573 BINAVE 4.1 2005/07/18 16:40:54 1573 13 MERGE 3.3 2005/08/11 12:14:12 13 13 MERGE 3.3 2005/08/11 12:33:51 13 13 MERGE 3.3 2005/08/12 08:47:50 13 13 MERGE 3.3 2005/10/10 15:18:31 13 13 CALIB 11.5 2005/10/10 15:22:07 13 13 CLEAN 4.8 2005/10/10 15:22:47 ? ? SORT 3.5 2005/10/10 15:23:04 13 13 REMOVECH 7.0 2005/10/10 15:25:42 13 13 CHGUNITS 2.1 2005/10/11 11:22:02 13 13 REORDER 1.2.1 2005/10/11 11:23:04 ? ? HDREDIT2 2.5 2005/10/12 13:42:58 ? ? CLEAN 5.0 2006/06/06 14:43:28 13 13 HDREDIT2 2.5.1 2006/06/06 14:59:35 ? ? REMOVECH 7.0 2006/06/06 16:22:57 13 13 CHANGE_FLAGS 1.0 2013/07/16 11:48:05 13 13 SORT 3.6 2013/10/28 16:46:24 13 13 MERGE 3.5 2013/10/28 16:46:39 13 13 SORT 3.6 2013/10/28 16:50:49 13 13 HDREDIT2 2.6 2013/10/28 16:50:54 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:32:05 13 13 CHANGE_FLAGS 2.0 2014/11/20 09:54:48 13 13 $END $REMARKS -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data\2005-12\CTD\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -MERGE *** Secondary file not found *** Primary file : Q:\Cruise_Data\2005-12\CTD\hydro\2005-12-0050.samavg Secondary file: Q:\Cruise_Data\2005-12\CTD\hydro\2005-12-0050.sal -MERGE *** Secondary file not found *** Primary file : Q:\Cruise_Data\2005-12\CTD\hydro\2005-12-0050.mrg1 Secondary file: Q:\Cruise_Data\2005-12\CTD\hydro\2005-12-0050.add -The following MERGE parameters were used: 2005/08/12 08:47:48 2005/08/12 08:47:48 2005/08/12 08:47: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Nitrate, Flag:Nitrate, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate Primary file : Q:\Cruise_Data\2005-12\ctd\hydro\2005-12-0050.mrg2 Secondary file: Q:\Cruise_Data\2005-12\ctd\hydro\2005-12-0050.nut Comments from secondary file: Q:\Cruise_Data\2005-12\ctd\hydro\2005-12-0050.nut ------------------------------------------------- -SORT parameters: 2005/08/12 08:47:30 Sorted in ascending order of channel Sample_Number -The following MERGE parameters were used: 2005/10/10 15:18:29 2005/10/10 15:18:29 2005/10/10 15:18: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Chlorophyll:Extracted, Flag:Chlorophyll:Extracted Primary file : Q:\Cruise_Data\2005-12\Ctd\hydro\2005-12-0050.mrg Secondary file: Q:\Cruise_Data\2005-12\Ctd\hydro\2005-12-0050.chl -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2005-12\CTD\doc\2005-12-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 10 Oxygen:Dissolved:SBE mL/L 10 -0.1430000E-01 0.1342300E+01 -CLEAN functions: 2005/10/10 15:22:46 20 Remove Sea-Bird comments from the header. -SORT parameters: 2005/10/10 15:23:04 Sorted in ascending order of channel Pressure -REMOVECH 2005/10/10 15:25:42 The following CHANNEL(S) were removed: Scan_Number Temperature:Secondary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Status:Pump Descent_Rate [m/s] Salinity:T1:C1 [PSS-78] Flag -CHANGE units: 'Oxygen:Dissolved:SBE' changed from mL/L to umol/kg -HEADER EDITS: 2005/10/12 13:42:58 Applied edit header: Q:\Cruise_Data\2005-12\CTD\doc\2005-12-BOT-HDR-amend.TXT Channel 2: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 5: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 6: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 11: Nitrate [umol/L] Units: ==> umol/L Channel 13: Silicate [umol/L] Units: ==> umol/L Channel 15: Phosphate [umol/L] Units: ==> umol/L Channel 17: Chlorophyll:Extracted [mg/m^3] Format: F8.3 ==> F7.2 -CLEAN functions: 2006/06/06 14:42:19 20 Reset #RECS, MIN & MAX values in header. -HEADER EDITS: 2006/06/06 14:59:35 Channel 11: Nitrate_plus_Nitrite [umol/L] Name: Nitrate ==> Nitrate_plus_Nitrite Channel 12: Flag:Nitrate_plus_Nitrite [] Name: Flag:Nitrate ==> Flag:Nitrate_plus_Nitrite -REMOVECH 2006/06/06 16:22:57 The following CHANNEL(S) were removed: Fluorescence:URU:Seapoint [mg/m^3] Oxygen:Dissolved:SBE [mL/L] Oxygen:Dissolved:SBE [umol/kg] -SORT parameters: 2013/10/28 16:46:24 Sorted in ascending order of channel Sample_Number -The following MERGE parameters were used: 2013/10/28 16:46:39 Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Secondary Primary Channels to Include: ALL Secondary Channels to Include: Dimethyl_Sulphide, Flag:Dimethyl_Sulphide Primary file : P:\John Pages Archive\2005-12\DMS\2005-12-0050.srt_che Secondary file: P:\John Pages Archive\2005-12\DMS\2005-12-0050.ios -SORT parameters: 2013/10/28 16:50:49 Sorted in ascending order of channel Pressure -HEADER EDITS: 2013/10/28 16:50:54 Applied edit header: P:\John Pages Archive\DMS_Methods post 1999.txt $END *COMMENTS Comments from secondary file: Q:\Cruise_Data\2005-12\ctd\hydro\2005-12-0050.nut ------------------------------------------------- Sample_Number 237: average of duplicate samples Analysis methods: ----------------- Salinity samples are collected in glass bottles and analyzed on Guildline model 8400B Autosal Salinometers which are standardized with IAPSO standard seawater. Oxygen samples are analyzed on an automated Winkler titration system following the procedures of Carpenter (1965). A Brinkmann model 665 Dosimat and model PC910 Colorimeter is controlled by Visual-Basic program to titrate the oxygen samples. Nutrient samples are analyzed fresh on board using a Technicon AAII auto- analyzer following methods described in Barwell-Clarke and Whitney (1996). Chlorophyll samples are collected in calibrated polycarbonate bottles (~330ml), then filtered onto 25mm MFS GF/75 filters at <70mmHg vacuum. The filters are placed in glass scintillation vials and immediately frozen at -20ºC until analysis. The chlorophyll is extracted in 10 ml of 90% acetone for 24h at -20ºC, then brought to room temperature and the extract is decanted and measured using a Turner Designs 10-AU-005-CE fluorometer, which has been calibrated with solutions of commercially prepared chlorophyll. For DMS methods see file "Method post 1999 for Dimethylsulfide Analysis.docx" in directory \\OSD_Data_Archive\Cruise_Data\Documents\Analysis Reference Papers\. The minimum detectable level for DMS is 0.10 nM, so “0” values should be interpreted as <0.10. . References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. J. Barwell-Clarke and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- ------ ---- ------ ------------ Oxygen:Dissolved:SBE mL/L 10 -99 () (-0.143E-01 1.3423) $END !-1-- --2--- ---3---- --4-- ---5---- 6- -7-- --8-- 9 --10- - --12-- - --14-- - --16-- - !Samp Pressu Temperat Trans Salinity Bo Numb Nitra F Silic F Phosph F Chloro F Dimeth F !le_ re ure: missi :T0:C0 tt er_o te_ l ate l ate l phyll: l yl_ l !Numb Primary vity ~u ~bin plus_ ~ ~ ~ Extrac ~ Sulphi ~ !er mb _rec Nitri t t t ted e de d ! er ords te e e e d e !---- ------ -------- ----- -------- -- ---- ----- - ----- - ------ - ------ - ------ - *END OF HEADER 242 0.8 10.3803 25.9 32.5073 13 121 7.7 0 3.6 0 0.99 0 0.41 0 3.46 0 241 4.8 10.3618 53.5 32.5090 12 121 7.7 0 3.6 0 1.00 0 0.35 0 3.56 6 240 10.1 10.2408 52.8 32.5074 11 121 7.7 0 3.6 0 0.99 0 0.36 0 3.62 0 239 15.0 10.1905 52.7 32.5069 10 121 7.7 0 3.8 0 0.99 0 0.36 0 3.46 0 238 20.1 10.1736 52.3 32.5190 9 121 7.7 0 4.0 0 0.99 0 0.41 0 3.62 0 237 24.9 10.0341 52.2 32.5219 8 121 7.7 6 4.0 6 1.01 6 0.43 0 3.37 0 236 29.6 8.0359 53.4 32.5947 7 121 9.4 0 7.5 0 1.15 0 0.46 0 1.65 0 235 39.9 7.1405 56.2 32.6369 6 121 11.8 0 14.5 0 1.27 0 0.50 0 0.01 0 234 50.3 6.8350 58.1 32.6393 5 121 12.5 0 15.7 0 1.31 0 0.36 0 3.30 0 233 75.7 6.3951 61.1 32.6768 4 121 14.9 0 19.3 0 1.44 0 0.17 0 0.00 0 232 100.0 5.5277 61.5 33.0100 3 121 21.2 0 30.2 0 1.77 0 0.04 0 0.00 0 231 175.4 4.4704 61.6 33.7078 2 121 31.4 0 56.6 0 2.33 0 -99.00 0 0.00 0 230 200.5 4.4161 61.8 33.7654 1 121 34.5 0 64.7 0 2.54 0 -99.00 0 0.00 0