*2021/09/07 10:14:49.37
*IOS HEADER VERSION 2.0      2016/04/28 2016/06/13 IVF16

*FILE
    START TIME          : UTC 2005/09/30 15:10:00.000
    TIME INCREMENT      : 0 0 0 0.125 0  ! (day hr min sec ms)
    NUMBER OF RECORDS   : 4
    DATA DESCRIPTION    : Bottle:Rosette + CTD:Up
    FILE TYPE           : ASCII
    CRC                 : D550B44
    NUMBER OF CHANNELS  : 15

    $TABLE: CHANNELS
    ! No Name                        Units           Minimum        Maximum
    !--- --------------------------- --------------- -------------- --------------
       1 Sample_Number               n/a             62             65
       2 Bottle:Position             n/a             1              4
       3 Bottle_Number               n/a             1              4
       4 Pressure                    decibar         6.456          24.299
       5 Depth                       metres          6.402          24.091
       6 Temperature:Primary         'deg C (ITS90)' -1.9335        -1.2366
       7 Conductivity:Primary        S/m             2.62031        2.621313
       8 Transmissivity              %/metre         6.7            7.5
       9 Fluorescence:URU:Seapoint   mg/m^3          0.342          0.368
      10 Salinity:T0:C0              PSS-78          32.562         32.5714
      11 Oxygen:Dissolved:SBE        mL/L            7.616          7.654
      12 Oxygen:Dissolved:SBE        umol/kg         331.3243       332.975
      13 Number_of_bin_records       n/a             81             81
      14 Salinity:Bottle             PSS-78          32.5641        32.5653
      15 Flag:Salinity:Bottle        ' '
    $END

    $TABLE: CHANNEL DETAIL
    ! No  Pad   Start  Width  Format  Type  Decimal_Places
    !---  ----  -----  -----  ------  ----  --------------
       1  -99   ' '        5  I       I       0
       2  -99   ' '        3  I       I     ' '
       3  -99   ' '        3  I       I       0
       4  -99   ' '        7  F       ' '     1
       5  -99   ' '        7  F       ' '     1
       6  -99   ' '        9  F       ' '     4
       7  -99   ' '       10  F       ' '     6
       8  -99   ' '        6  F       ' '     1
       9  -99   ' '        8  F       ' '     3
      10  -99   ' '        9  F       ' '     4
      11  -99   ' '        7  F       ' '     2
      12  -99   ' '        6  F       ' '     1
      13  ' '   ' '        5  I       I       0
      14  -99   ' '        9  F       R4      4
      15  0     ' '        3  NQ      C     ' '
    $END
    $REMARKS
        Flag channels were initialized with zeros. Non-zero values have the following significance:
        ----------------------------------------------------------------------------------
        1 = Sample for this measurement was collected but not analyzed. Sample lost.
        2 = Acceptable Measurement
        3 = Questionable Measurement (Probably Good)
        4 = Poor Measurement (Probably Bad)
        5 = Measurement Not Reported (Bad)
        6 = Mean of replicate measurements
        7 = Manual chromatographic peak measurement
        8 = Irregular digital chromatographic peak integration
        9 = Sample was planned for this measurement from this bottle but was not collected
        ----------------------------------------------------------------------------------
    $END

*ADMINISTRATION
    MISSION             : 2005-006
    AGENCY              : IOS, Ocean Sciences Division, Sidney, B.C.
    COUNTRY             : Canada
    PROJECT             : JWACS-2005
    SCIENTIST           : van Hardenberg B.
    PLATFORM            : Sir Wilfrid Laurier

*LOCATION
    GEOGRAPHIC AREA     : Beaufort Sea / Chukchi Sea
    STATION             : HM05-B
    EVENT NUMBER        : 10
    LATITUDE            :  70  14.97700 N  ! (deg min)
    LONGITUDE           : 143  56.52700 W  ! (deg min)
    WATER DEPTH         : 30

*INSTRUMENT
    TYPE                : Sea-Bird CTD
    MODEL               : SBE-25
    SERIAL NUMBER       : 0293

    $TABLE: SENSORS
    !   Name                               Abs Depth       Serial No
    !   ---------------------------------  --------------  ----------
        Temperature                        ' '             034115
        Conductivity                       ' '             042607
        'Pressure:Strain Gauge'            ' '             290464
        'Oxygen:SBE 43'                    ' '             43-0615
        'User Polynomial'                  ' '             ' '
        Fluorometer:Seapoint               ' '             2336
        Transmissometer:Chelsea/Seatech    ' '             SeaTech
        Unavailable                        ' '             ' '
        'SPAR/Surface Irradiance'          ' '             ' '
    $END
    $REMARKS
        Software Version Seasave Win32 V 5.33
    $END

*HISTORY

    $TABLE: PROGRAMS
    !   Name     Vers   Date       Time     Recs In   Recs Out
    !   -------- ------ ---------- -------- --------- ---------
        SBE_IOS  4.2.3  2020/08/19 14:19:22       324       324
        CLEAN    5.2.4  2020/08/20 14:17:00       324       324
        ADDSAMP  3.6    2020/08/20 14:17:06       324       324
        BINAVE   4.2.1  2020/08/20 14:24:06       324         4
        MERGE    3.5.1  2020/08/20 14:24:47         4         4
        CLEAN    5.2.4  2020/08/31 16:34:49         4         4
        CALIB    12.0.1 2020/08/31 16:35:09         4         4
        SORT     3.6    2020/08/31 16:35:17         4         4
        REMOVECH 8.2    2020/08/31 16:35:55         4         4
        CHGUNITS 3.1.2  2020/08/31 16:36:07         4         4
        REORDER  1.3.1  2020/08/31 16:36:16 ?         ?
        HDREDIT2 3.2    2020/08/31 16:36:41 ?         ?
        HDREDIT2 3.2    2021/09/07 10:14:49 ?         ?
    $END
    $REMARKS
        -CLEAN functions: 2020/08/20 14:17:00
         Reset #RECS, MIN & MAX values in header.
         Set event to last  4 characters of file name
        -The following ADDSAMP parameters were used:
         Sample Number Lookup File: D:\Telework\2005-006\Processing\hydro\addsamp.csv
         Bottle Channel Name: Bottle_Number
        -The following BINAVE parameters were used:
         Bin channel = Bottle_Number
         Averaging interval =    1.00
         Minimum bin value =       0.000
         Bin value was used
         Interpolated values were NOT used for empty bins
         Channel 'NUMBER_OF_BIN_RECORDS' was added to file.
        -The following MERGE parameters were used: 2020/08/20 14:24:47
         Merge Channel: Sample_Number
         Merge Scheme Used: Add Secondary to Primary
         Overlap Scheme Used: Keep Primary
         Primary Channels to Include: ALL
         Secondary Channels to Include:
           Salinity:Bottle,
           Flag:Salinity:Bottle,
           Oxygen:Dissolved,
           Flag:Oxygen:Dissolved,
           Barium:Dissolved,
           Flag:Barium:Dissolved,
           Nitrate_plus_Nitrite,
           Flag:Nitrate_plus_Nitrite,
           Silicate,
           Flag:Silicate,
           Phosphate,
           Flag:Phosphate
         Primary file  : D:\Telework\2005-006\Processing\hydro\2005-006-0010.samavg
         Secondary file: D:\Telework\2005-006\Processing\hydro\2005-006-0010.mrg1
        -CLEAN functions: 2020/08/31 16:34:48 20
         Reset #RECS, MIN & MAX values in header.
         Change character data from " " to "0" in channels Flag*
         Delete Empty Channels:    10 deleted.
        -CALIB parameters: 2020/08/31 16:35:09
         Calibration type = Correct
         Mode: ONLY - calibration specs from Cal File only.
         Calibration file = D:\Telework\2005-006\Processing\doc\2005-006-recal1.ccf
         Calibrations applied:
         Ch Name                          Units    Fmla Coefficents
         -- ----------------------------- --------- --- -----------------------------
         14 Oxygen:Dissolved:SBE          mL/L       10  0.0000000E+00  0.1095000E+01
        -SORT parameters: 2020/08/31 16:35:17
         Sorted in ascending order of channel Pressure:StrainGauge [decibar]
        -REMOVECH 2020/08/31 16:35:55
         The following CHANNEL(S) were removed:
          Scan_Number
          Oxygen:Voltage:SBE [volts]
          Descent_Rate [m/s]
          Flag
        -CHANGE units:
         Temperature reference channel: Temperature:Primary [deg C (ITS90)]
         Salinity    reference channel: Salinity:T0:C0 [PSS-78]
         'Oxygen:Dissolved:SBE [mL/L]' changed from mL/L    to umol/kg
        -HEADER EDITS: 2020/08/31 16:36:41
         Applied edit header: D:\Telework\2005-006\Processing\doc\HYDRO\2005-006-bot-hdr.txt
         Channel  4: Pressure [decibar]
           Name:   Pressure:StrainGauge ==> Pressure
           Format: F10.3 ==> F7.1
         Channel  5: Depth [metres]
           Name:   Depth:Salt_Water ==> Depth
           Format: F10.3 ==> F7.1
         Channel  7: Conductivity:Primary [S/m]
           Format: F11.6 ==> F10.6
         Channel 11: Oxygen:Dissolved:SBE [mL/L]
           Format: F8.3 ==> F7.2
        -HEADER EDITS: 2021/09/07 10:14:49
         Applied edit header: C:\Users\huntingtons\Desktop\2005-006-hdr-fix.txt
    $END

*COMMENTS
    SBE HEADER
      Sea-Bird SBE 25 Data File:
      FileName = C:\2005-06\2005-06-010.hex
      Software Version Seasave Win32 V 5.33
      Temperature SN = 034115
      Conductivity SN = 042607
      System UpLoad Time = Sep 30 2005 15:10:24
       Ship:   CCGS "Sir Wilfrid Laurier"
       Cruise:    2005-06
       Station:    HM05-B
       depth(m):  30
       Latitude:  70 14.977 N
       Longitude:  143 56.527 W
      Real-Time Sample Interval = 0.125 seconds
    # nquan = 14
    # nvalues = 324
    # units = specified
    # name 0 = scan: Scan Count
    # name 1 = bpos: Bottle Position in Carousel
    # name 2 = nbf: Bottles Fired
    # name 3 = prSM: Pressure, Strain Gauge [db]
    # name 4 = depSM: Depth [salt water, m], lat = 49.00
    # name 5 = t090C: Temperature [ITS-90, deg C]
    # name 6 = c0S/m: Conductivity [S/m]
    # name 7 = xmiss: Beam Transmission, Chelsea/Seatech [%]
    # name 8 = flSP: Fluorescence, Seapoint
    # name 9 = sbeox0V: Oxygen raw, SBE 43 [V]
    # name 10 = dz/dtM: Descent Rate [m/s]
    # name 11 = sal00: Salinity, Practical [PSU]
    # name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
    # name 13 = flag:  0.000e+00
    # interval = seconds: 0.125
    # start_time = Feb 08 2004 19:00:56 [System UTC, first data scan.]
    # bad_flag = -9.990e-29
    # <Sensors count="11" >
    #   <sensor Channel="1" >
    #     <!-- Frequency 0, Temperature -->
    #     <TemperatureSensor SensorID="55" >
    #       <SerialNumber>034115</SerialNumber>
    #       <CalibrationDate>10-Dec-04</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <A>0.00000000e+000</A>
    #       <B>0.00000000e+000</B>
    #       <C>0.00000000e+000</C>
    #       <D>0.00000000e+000</D>
    #       <F0_Old>0.000</F0_Old>
    #       <G>4.35844944e-003</G>
    #       <H>6.45635712e-004</H>
    #       <I>2.31397594e-005</I>
    #       <J>2.06164012e-006</J>
    #       <F0>1000.000</F0>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.0000</Offset>
    #     </TemperatureSensor>
    #   </sensor>
    #   <sensor Channel="2" >
    #     <!-- Frequency 1, Conductivity -->
    #     <ConductivitySensor SensorID="3" >
    #       <SerialNumber>042607</SerialNumber>
    #       <CalibrationDate>20-Jan-05</CalibrationDate>
    #       <UseG_J>1</UseG_J>
    #       <!-- Cell const and series R are applicable only for wide range sensors.
     -->
    #       <SeriesR>0.0000</SeriesR>
    #       <CellConst>2000.0000</CellConst>
    #       <ConductivityType>0</ConductivityType>
    #       <Coefficients equation="0" >
    #         <A>0.00000000e+000</A>
    #         <B>0.00000000e+000</B>
    #         <C>0.00000000e+000</C>
    #         <D>0.00000000e+000</D>
    #         <M>0.0</M>
    #         <CPcor>-9.57000000e-008</CPcor>
    #       </Coefficients>
    #       <Coefficients equation="1" >
    #         <G>-9.12563833e+000</G>
    #         <H>1.27338380e+000</H>
    #         <I>-1.79199514e-003</I>
    #         <J>1.84253585e-004</J>
    #         <CPcor>-9.57000000e-008</CPcor>
    #         <CTcor>3.2500e-006</CTcor>
    #         <!-- WBOTC not applicable unless ConductivityType = 1. -->
    #         <WBOTC>0.00000000e+000</WBOTC>
    #       </Coefficients>
    #       <Slope>1.00000000</Slope>
    #       <Offset>0.00000</Offset>
    #     </ConductivitySensor>
    #   </sensor>
    #   <sensor Channel="3" >
    #     <!-- Pressure voltage, Pressure, Strain Gauge -->
    #     <PressureSensor SensorID="49" >
    #       <SerialNumber>290464</SerialNumber>
    #       <CalibrationDate>27-Dec-2002</CalibrationDate>
    #       <A0>7.962542e+002</A0>
    #       <A1>-2.073565e-001</A1>
    #       <A2>2.519294e-007</A2>
    #       <Offset>0.60000</Offset>
    #     </PressureSensor>
    #   </sensor>
    #   <sensor Channel="4" >
    #     <!-- A/D voltage 0, Oxygen, SBE 43 -->
    #     <OxygenSensor SensorID="38" >
    #       <SerialNumber>43-0615</SerialNumber>
    #       <CalibrationDate>09-Mar-2004</CalibrationDate>
    #       <Use2007Equation>0</Use2007Equation>
    #       <CalibrationCoefficients equation="0" >
    #         <!-- Coefficients for Owens-Millard equation. -->
    #         <Boc>0.0000</Boc>
    #         <Soc>3.9160e-001</Soc>
    #         <offset>-0.4643</offset>
    #         <Pcor>1.35e-004</Pcor>
    #         <Tcor>0.0011</Tcor>
    #         <Tau>0.0</Tau>
    #       </CalibrationCoefficients>
    #       <CalibrationCoefficients equation="1" >
    #         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and
    later. -->
    #         <Soc>0.0000e+000</Soc>
    #         <offset> 0.0000</offset>
    #         <A> 0.0000e+000</A>
    #         <B> 0.0000e+000</B>
    #         <C> 0.0000e+000</C>
    #         <D0> 2.5826e+000</D0>
    #         <D1> 1.92634e-004</D1>
    #         <D2>-4.64803e-002</D2>
    #         <E> 0.0000e+000</E>
    #         <Tau20> 0.0000</Tau20>
    #         <H1>-3.3000e-002</H1>
    #         <H2> 5.0000e+003</H2>
    #         <H3> 1.4500e+003</H3>
    #       </CalibrationCoefficients>
    #     </OxygenSensor>
    #   </sensor>
    #   <sensor Channel="5" >
    #     <!-- A/D voltage 1, Free -->
    #   </sensor>
    #   <sensor Channel="6" >
    #     <!-- A/D voltage 2, Free -->
    #   </sensor>
    #   <sensor Channel="7" >
    #     <!-- A/D voltage 3, User Polynomial -->
    #     <UserPolynomialSensor SensorID="61" >
    #       <SerialNumber></SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <SensorName></SensorName>
    #       <A0>0.00000000</A0>
    #       <A1>1.00000000</A1>
    #       <A2>0.00000000</A2>
    #       <A3>0.00000000</A3>
    #     </UserPolynomialSensor>
    #   </sensor>
    #   <sensor Channel="8" >
    #     <!-- A/D voltage 4, Fluorometer, Seapoint -->
    #     <FluoroSeapointSensor SensorID="11" >
    #       <SerialNumber>2336</SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <!-- The following is an array index, not the actual gain setting. -->
    #       <GainSetting>2</GainSetting>
    #       <Offset>0.000</Offset>
    #     </FluoroSeapointSensor>
    #   </sensor>
    #   <sensor Channel="9" >
    #     <!-- A/D voltage 5, Transmissometer, Chelsea/Seatech -->
    #     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
    #       <SerialNumber>SeaTech</SerialNumber>
    #       <CalibrationDate>23 APR 2001</CalibrationDate>
    #       <M>20.8310</M>
    #       <B>-0.1250</B>
    #       <PathLength>0.250</PathLength>
    #     </TransChelseaSeatechWetlabCStarSensor>
    #   </sensor>
    #   <sensor Channel="10" >
    #     <!-- SPAR voltage, Unavailable -->
    #   </sensor>
    #   <sensor Channel="11" >
    #     <!-- SPAR voltage, SPAR/Surface Irradiance -->
    #     <SPAR_Sensor SensorID="51" >
    #       <SerialNumber></SerialNumber>
    #       <CalibrationDate></CalibrationDate>
    #       <ConversionFactor>0.00000000</ConversionFactor>
    #       <RatioMultiplier>0.00000000</RatioMultiplier>
    #     </SPAR_Sensor>
    #   </sensor>
    # </Sensors>
    # datcnv_date = Aug 19 2020 10:48:59, 7.23.2
    # datcnv_in = D:\Telework\2005-006\RAW CTD Data\2005-006-0010.hex D:\Telework\20
    05-006\Processing\doc\2005-006-ctd2.xmlcon
    # datcnv_ox_hysteresis_correction = no
    # datcnv_ox_tau_correction = yes
    # datcnv_bottle_scan_range_source = BL file
    # datcnv_scans_per_bottle = 81
     END*

    Comments from secondary file:
    D:\Telework\2005-006\Processing\hydro\2005-006-0010.mrg1
    --------------------------------------------------------
    Sample_Number   62: ALL: Leaky Niskin
    CTD Data Processing Notes:
    --------------------------
    Conductivity and Fluorescence:URU:Wetlabs data are nominal and unedited except
    that some records were removed in editing temperature and salinity.

    Channel Oxygen:Dissolved:SBE has been recalibrated based on a comparison with
    titrated samples. The data have not been edited. The response time of this type
    of sensor was long in 2005. The errors caused by this are partly addressed
    in the recalibration. The sensor performance was aided by the fact that local
    vertical gradients were frequently low.

    While the CTD fluorescence data are expressed in concentration units, they
    do not always compare well to extracted chlorophyll samples. No chlorophyll
    samples were available from this cruise at the time of processing.

    For details on the processing see document: 2005-006_Processing_Report.doc.

    ---------------------------------------------------------------------------------

*CALIBRATION

    $TABLE: CORRECTED CHANNELS
    !   Name                   Units  Fmla Pad    Coefficients
    !   ---------------------- ------ ---- ------ ------------
        Oxygen:Dissolved:SBE   mL/L     10 -99    () (0 1.095)
    $END
!-1-- 2- 3- --4--- --5--- ---6---- ----7---- --8-- ---9--- ---10--- --11-- --12- -13- ---14--- 15
!Samp Bo Bo Pressu Depth  Temperat Conductiv Trans Fluores Salinity Oxygen Oxyge Numb Salinity Fl
!le_  tt tt re            ure:     ity:      missi cence:  :T0:C0   :      n:    er_o :Bottle  ag
!Numb ~i ~u               Primary  Primary   vity  URU:             Dissol Disso ~bin          ~o
!er   ti mb                                        Seapoin          ved:   lved: _rec          tt
!     on er                                        t                SBE    SBE   ords          le
!---- -- -- ------ ------ -------- --------- ----- ------- -------- ------ ----- ---- -------- --
*END OF HEADER
   65  4  4    6.5    6.4  -1.2366  2.621313   7.0   0.360  32.5714   7.65 333.0   81  32.5653 0
   64  3  3   11.6   11.5  -1.9335  2.620310   6.8   0.349  32.5623   7.62 331.4   81 -99.0000 0
   63  2  2   21.3   21.1  -1.2438  2.620683   7.5   0.368  32.5620   7.62 331.3   81  32.5641 0
   62  1  1   24.3   24.1  -1.2439  2.620851   6.7   0.342  32.5625   7.64 332.4   81  32.5651 0