*2005/05/29 13:19:31.40 *IOS HEADER VERSION 1.5 2005/04/01 2005/04/01 *FILE START TIME : UTC 2005/03/03 21:14:31.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 24 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 9 $TABLE: CHANNELS ! No Name Units Minimum Maximum ! -- --------------------------- --------------- -------------- -------------- 1 Pressure decibar 2.1 25.1 2 Temperature:Secondary 'deg C (ITS90)' 8.9722 9.269 3 Transmissivity %/metre 40.5 43.8 4 Fluorescence:URU:Seapoint mg/m^3 0.608 1.327 5 Oxygen:Dissolved:SBE mL/L 6.56 6.91 6 PAR uE/m^2/sec 19.1 968.6 7 PAR:Reference uE/m^2/sec 1308.3 1513.3 8 Salinity:T1:C1 PSS-78 31.7353 31.8072 9 Number_of_bin_records n/a 20 59 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places ! -- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 7 F ' ' 2 6 -99 ' ' 7 F ' ' 1 7 -99 ' ' 7 F ' ' 1 8 -99 ' ' 9 F ' ' 4 9 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2005-02\ctd\derive\200 $END *ADMINISTRATION MISSION : 2005-02 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Optical Properties Off Vancouver Island SCIENTIST : Pena A. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : North-East Pacific STATION : LB01 EVENT NUMBER : 28 LATITUDE : 48 40.42000 N ! (deg min) LONGITUDE : 124 59.70000 W ! (deg min) ALTIMETER (M) : 8.94 ! custom item $REMARKS Altimeter value is distance from bottom and is calculated as the median of the deepest 2 metres of data. $END *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0443 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2668 conductivity:primary ' ' 2399 pressure ' ' 63507 temperature:secondary ' ' 2106 conductivity:secondary ' ' 1763 Fluorometer ' ' Seapoint transmissometer:primary ' ' 333DR Oxygen:SBE ' ' 0766 irradiance:primary ' ' 4656 altimeter: ' ' ' ' surface ' ' 'degrees = 0.0' $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.32 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! -------- ------ ---------- -------- --------- --------- SBE_IOS 2.9 2005/04/06 14:27:00 2451 2451 CLEAN 4.7.1 2005/04/06 15:33:00 2439 2439 SHIFTDAT 3.4 2005/04/07 09:11:57 2439 2439 SHIFTDAT 3.4 2005/04/07 09:55:35 2439 2439 SHIFTDAT 3.4 2005/04/07 11:44:37 2439 2439 SHIFTDAT 3.4 2005/04/07 11:46:05 2439 2439 DELETE 6.3 2005/04/07 11:47:23 2439 792 CTDEDIT 4.60 2005/04/10 16:18:21 792 628 CALIB 11.4 2005/04/19 15:36:53 628 628 FILTERS 4.3 2005/04/19 15:37:55 628 628 BINAVE 4.1 2005/04/19 15:38:29 628 24 REMOVECH 7.0 2005/04/20 16:32:33 24 24 HDREDIT2 2.4 2005/04/20 16:33:53 ? ? CALIB 11.4 2005/05/29 13:19:31 24 24 $END $REMARKS -CLEAN functions: 2005/04/06 15:31:38 20 Interpolation by Channel 1: Scan_Number [n/a] in Pressure Change Pad Value to -99 in Channel: Oxygen:Dissolved:SBE [mL/L] Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Oxygen:Dissolved:SBE # of Records to Advance (-ve for Delay): At REC# 0 Shift=180.00 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.70 Salinity was recalculated after shift -The following SHIFT parameters were used. Shift Channel: Conductivity:Secondary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -0.40 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 15.68 dbars Sample interval (from FILE section of header) = 0.042 seconds. -CTDEDIT 2005/04/10 16:18:21 164 records were deleted in this editing session. No data values were changed. -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2005-02\ctd\doc\2005-02-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 10 Oxygen:Dissolved:SBE mL/L 10 0.1110000E+00 0.1463000E+01 -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:URU:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -REMOVECH 2005/04/20 16:32:33 The following CHANNEL(S) were removed: Scan_Number Temperature:Primary [deg C (ITS90)] Conductivity:Primary [S/m] Conductivity:Secondary [S/m] Oxygen:Voltage:SBE [volts] Altimeter [metres] Descent_Rate [m/s] Salinity:T0:C0 [PSS-78] Flag -HEADER EDITS: 2005/04/20 16:33:53 Channel 1: Pressure [decibar] Units: dbars ==> decibar Format: F10.3 ==> F7.1 Channel 4: Fluorescence:URU:Seapoint [mg/m^3] Name: Fluorescence:Seapoint ==> Fluorescence:URU:Seapoint Channel 5: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 6: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 7: PAR:Reference [uE/m^2/sec] Format: F11.3 ==> F7.1 -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2005-02\ctd\doc\2005-02-recal2.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 8 Salinity:T1:C1 PSS-78 10 0.4400000E-02 0.1000000E+01 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = C:\DATA\2005-02\2005-02-0028.dat Software Version Seasave Win32 V 5.32 Temperature SN = 2668 Conductivity SN = 2399 Number of Bytes Per Scan = 33 Number of Voltage Words = 5 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Mar 03 2005 21:14:59 NMEA Latitude = 48 40.42 N NMEA Longitude = 124 59.70 W NMEA UTC (Time) = Mar 03 2005 21:14:31 Store Lat/Lon Data = Add to Header Only Ship: Tully Tully Cruise: 2005-02 2005-02 Station: LB01 Latitude: Longitude: # nquan = 17 # nvalues = 2451 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = sbeox0V: Oxygen Voltage, SBE 43 # name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l] # name 10 = par: PAR/Irradiance, Biospherical/Licor # name 11 = spar: SPAR/Surface Irradiance # name 12 = altM: Altimeter [m] # name 13 = dz/dtM: Descent Rate [m/s] # name 14 = sal00: Salinity [PSU] # name 15 = sal11: Salinity, 2 [PSU] # name 16 = flag: flag # span 0 = 1, 2451 # span 1 = 1.176, 25.685 # span 2 = 8.9680, 9.3279 # span 3 = 8.9692, 9.2759 # span 4 = 3.072164, 3.426605 # span 5 = 3.406406, 3.425433 # span 6 = 76.6756, 81.4953 # span 7 = 5.2015e-01, 2.3810e+00 # span 8 = 2.0476, 2.2332 # span 9 = 4.15114, 4.65735 # span 10 = 1.6431e+01, 2.0985e+03 # span 11 = 1.2271e+03, 1.5676e+03 # span 12 = 0.00, 100.00 # span 13 = -1.473, 1.195 # span 14 = 28.0957, 31.8151 # span 15 = 31.6892, 31.8040 # span 16 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Mar 03 2005 21:14:59 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2668, 18-Nov-04 # sensor 1 = Frequency 1 conductivity, primary, 2399, 19-Nov-04, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 63507, 25-Oct-04 # sensor 3 = Frequency 3 temperature, secondary, 2106, 18-Nov-04 # sensor 4 = Frequency 4 conductivity, secondary, 1763, 19-Nov-04, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 333DR, 29-Nov-04 # sensor 7 = Extrnl Volt 3 Oxygen, SBE, primary, 0766, 16-Nov-04p # sensor 8 = Extrnl Volt 4 irradiance (PAR), primary, 4656, 11-Feb-03 # sensor 9 = Extrnl Volt 6 altimeter # sensor 10 = Extrnl Volt 9 surface irradiance (SPAR), degrees = 0.0 # datcnv_date = Apr 04 2005 14:59:55, 5.32a # datcnv_in = Q:\Cruise_Data\2005-02\ctd\2005-02-0028.dat Q:\Cruise_Data\2005-02 \ctd\2005-02-ctd1.con # datcnv_skipover = 0 # wildedit_date = Apr 04 2005 16:34:08, 5.32a # wildedit_in = Q:\Cruise_Data\2005-02\ctd\convert\2005-02-0028.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C # wildedit_excl_bad_scans = yes # celltm_date = Apr 05 2005 17:24:16, 5.32a # celltm_in = Q:\Cruise_Data\2005-02\ctd\wildedit\2005-02-0028.cnv # celltm_alpha = 0.0200, 0.0200 # celltm_tau = 7.0000, 7.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Apr 05 2005 17:26:34, 5.32a # Derive_in = Q:\Cruise_Data\2005-02\ctd\celltm\2005-02-0028.cnv Q:\Cruise_Data\ 2004-25\CTD\2004-25-0001.CON # file_type = ascii END* CTDEDIT was used to remove surface records to 1.9db and a few records from the bottom of the cast. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- -------- ---- ------ ------------ Oxygen:Dissolved:SBE mL/L 10 -99 () (0.111 1.463) Salinity:T1:C1 PSS-78 10 -99 () (0.44E-02 1) $END !--1--- ---2---- --3-- ---4--- --5--- --6--- --7--- ---8---- -9-- !Pressu Temperat Trans Fluores Oxygen PAR PAR: Salinity Numb !re ure: missi cence: : Refere :T1:C1 er_o ! Secondar vity URU: Dissol nce ~bin ! y Seapoin ved: _rec ! t SBE ords !------ -------- ----- ------- ------ ------ ------ -------- ---- *END OF HEADER 2.1 9.2690 40.5 0.608 6.87 968.6 1513.3 31.7390 47 3.0 9.2677 41.1 0.626 6.91 535.7 1499.6 31.7399 35 4.0 9.2646 41.3 0.655 6.87 431.7 1477.8 31.7396 26 5.0 9.2624 41.6 0.639 6.83 336.4 1462.9 31.7391 28 6.0 9.2429 41.8 0.682 6.80 286.0 1451.7 31.7374 27 7.0 9.1939 43.8 0.722 6.78 252.8 1445.3 31.7353 24 8.0 9.1005 43.2 0.806 6.78 207.0 1436.0 31.7602 24 9.0 9.0839 43.3 0.840 6.76 189.9 1422.0 31.7664 23 10.0 9.0760 43.1 0.882 6.75 171.7 1409.8 31.7704 20 11.0 9.0813 43.3 1.015 6.73 146.9 1395.6 31.7698 21 12.0 9.0911 43.2 0.995 6.71 126.6 1381.9 31.7657 23 13.0 9.0828 43.4 0.927 6.69 106.8 1369.9 31.7691 24 14.0 9.0804 43.3 0.990 6.68 93.9 1361.5 31.7702 24 15.0 9.0657 43.2 1.162 6.66 82.4 1359.7 31.7768 23 16.0 9.0534 42.7 1.170 6.64 73.4 1358.8 31.7817 21 17.0 9.0371 42.3 1.027 6.63 64.6 1354.5 31.7887 21 18.0 9.0026 42.1 1.166 6.62 55.4 1347.9 31.8031 20 19.0 8.9967 42.2 1.111 6.61 46.9 1341.3 31.8057 21 20.0 9.0239 42.6 1.062 6.60 40.5 1333.7 31.7928 22 21.0 9.0029 42.1 1.032 6.60 35.0 1327.8 31.8011 24 22.0 8.9908 41.6 1.327 6.59 30.6 1319.9 31.8049 23 23.0 8.9823 41.3 1.129 6.57 26.8 1314.9 31.8060 22 24.0 8.9723 41.2 1.135 6.57 23.0 1310.0 31.8072 25 25.1 8.9722 41.2 1.272 6.56 19.1 1308.3 31.8071 59