*2013/12/17 16:05:23.31 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2005/02/19 16:20:30.000 END TIME : UTC 2005/02/19 16:26:30.000 TIME INCREMENT : 0 0 0 30 0 ! (day hr min sec ms) NUMBER OF RECORDS : 13 DATA DESCRIPTION : Thermosalinograph FILE TYPE : ASCII NUMBER OF CHANNELS : 8 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- -------------------------- --------------- -------------- -------------- 1 Date YYYY/MM/DD 38400 38400 2 Time HH:MM:SS 0.6809028 0.6850694 3 Time days 50.6809 50.68507 4 Temperature:Primary 'deg C (ITS90)' 7.3437 7.3601 5 Salinity:T0:C0 PSS-78 32.5525 32.5795 6 Fluorescence:URU:Wetlabs mg/m^3 3.38896 3.6715 7 Latitude degrees 47.75452 47.76592 8 Longitude degrees -146.4597 -146.4485 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ---------- ---- -------------- 1 -99 ' ' ' ' YYYY/MM/DD D ' ' 2 -99 ' ' ' ' HH:MM:SS T ' ' 3 -99 ' ' 11 F ' ' 6 4 -99 ' ' 9 F ' ' 4 5 -99 ' ' 9 F ' ' 4 6 -99 ' ' 8 F R4 3 7 -99 ' ' 10 F ' ' 5 8 -99 ' ' 11 F ' ' 5 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2005-01\TSG data\conve $END *ADMINISTRATION MISSION : 2005-01 AGENCY : IOS, Ocean Science and Productivity, Sidney, BC COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : N.E. Pacific EVENT NUMBER : 3 LATITUDE : 47 45.27122 N ! (deg min) LONGITUDE : 146 27.57935 W ! (deg min) LATITUDE 2 : 47 45.95512 N ! (deg min) LONGITUDE 2 : 146 26.90918 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-21 SERIAL NUMBER : 2487 INTAKE DEPTH (M) : 4.5 ! custom item $TABLE: SENSORS ! Name Abs Depth Serial No ! ----------------------- -------------- ---------- temperature ' ' 2487 conductivity ' ' 2487 temperature:secondary ' ' 2416 WET ' ' 'WETStar fluorometer' userpoly ' ' ' ' $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.32 $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.9 2005/05/17 09:02:53 13 13 CLEAN 4.7.1 2005/05/17 09:03:40 13 13 ADTIMCH 4.3 2005/05/17 09:03:59 13 13 CALIB 11.4 2005/06/06 11:37:26 13 13 REMOVECH 7.0 2005/06/06 13:06:15 13 13 HDREDIT2 2.5 2005/06/06 13:09:52 ? ? CALIB 11.6 2005/11/15 16:08:14 13 13 HDREDIT2 2.5.1 2005/11/17 16:10:51 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/17 16:05:23 13 13 $END $REMARKS -CLEAN functions: 2005/05/17 09:03:40 Set header Start and End times from the data. Set header Latitude and Longitude limits the data. -The following ADTIMCH parameters were used. Add IOS header Time/Date channels -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2005-01\TSG data\doc\2005-01-TSG-recal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Temperature:Primary deg C (IT 10 -0.2000000E+00 0.1000000E+01 7 Conductivity:Primary S/m 10 0.3000000E-01 0.1000000E+01 -REMOVECH 2005/06/06 13:06:15 The following CHANNEL(S) were removed: Scan_Number Temperature:Secondary [deg C (ITS90)] Conductivity:Primary [S/m] uploy0 temperature:Difference [deg C (ITS90)] Flag -HEADER EDITS: 2005/06/06 13:09:52 Applied edit header: Q:\Cruise_Data\2005-01\TSG data\doc\2005-01-THERM-HDR.TXT Channel 6: Fluorescence [volts] Name: Fluorescence:URU:Wetlabs ==> Fluorescence Units: mg/m^3 ==> volts -CALIB parameters: 2005/11/15 16:08:14 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = C:\DATA\repair shop\TOB\TOB-recal.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 6 Fluorescence mg/m^3 10 -0.6800000E-01 0.1662000E+02 -HEADER EDITS: 2005/11/17 16:10:51 Channel 6: Fluorescence:URU:Wetlabs [mg/m^3] Name: Fluorescence ==> Fluorescence:URU:Wetlabs $END *COMMENTS SBE HEADER Sea-Bird SBE 21 Data File: FileName = D:\Data\2005-01\2005-01-0003.hex Software Version Seasave Win32 V 5.32 Temperature SN = 2487 Conductivity SN = 2487 System UpLoad Time = Feb 19 2005 16:20:46 NMEA Latitude = 47 45.996 N NMEA Longitude = 146 27.617 W NMEA UTC (Time) = Feb 19 2005 16:20:30 Store Lat/Lon Data = Append to Every Scan Ship: Tully Cruise: 2005-01 Station: Latitude: 47 46.03 Longitude: 146 27.64 add lat long to every scan # nquan = 12 # nvalues = 13 # units = specified # name 0 = scan: Scan Count # name 1 = timeJ: Julian Days # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = sal00: Salinity [PSU] # name 6 = wetStar: Fluorescence, Wetlab Wetstar [mg/m^3] # name 7 = upoly0: Upoly 0, FLOW # name 8 = T2-T190C: Temperature Difference, 2 - 1 [ITS-90, deg C] # name 9 = latitude: Latitude [deg] # name 10 = longitude: Longitude [deg] # name 11 = flag: 0.000e+00 # span 0 = 1, 13 # span 1 = 50.680903, 50.685069 # span 2 = 7.5437, 7.5601 # span 3 = 7.3321, 7.3610 # span 4 = 3.353999, 3.356439 # span 5 = 32.5525, 32.5795 # span 6 = 0.2076, 0.2247 # span 7 = 0.8925519, 1.0036630 # span 8 = -0.2258, -0.1827 # span 9 = 47.75452, 47.76592 # span 10 = -146.45966, -146.44848 # span 11 = 0.0000e+00, 0.0000e+00 # interval = seconds: 30 # start_time = Feb 19 2005 16:20:30 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, 2487, 04-Dec-04 # sensor 1 = Frequency 1 conductivity, 2487, 04-Dec-04, cpcor = -9.5700e-08 # sensor 2 = Frequency 2 temperature, secondary, 2416, 05-Aug-04 # sensor 3 = Extrnl Volt 0 WET Labs, WETStar fluorometer # sensor 4 = Extrnl Volt 1 userpoly 0 # datcnv_date = May 09 2005 17:34:52, 5.32a # datcnv_in = Q:\Cruise_Data\2005-01\TSG data\2005-01-0003.hex Q:\Cruise_Data\20 05-01\TSG data\2005-01-0001.con # datcnv_skipover = 0 # file_type = ascii END* Sampling System --------------- The seawater is drawn from a 20-cm x 56-cm standpipe, flush with the hull and located 4.5 metres below the water line, and pumped approximately 50 metres through a 5-cm stainless steel insulated pipe up to the main lab. Between the intake and the pump is a 24 x 24-cm stainless steel strainer (1/2-cm grid). The pump is a Moyno model 2L6 stainless steel progressive cavity pump with flow and pressure control. In the lab, the seawater flows through a deairator (56-cm x15-cm diameter plexiglass cylinder) to remove air bubbles and then into the Seabird model 21 Seacat thermosalinograph. ******************************************************************* Salinity is considered +/- 0.01psu. *CALIBRATION $TABLE: CORRECTED CHANNELS !Name Units Fmla Pad Coefficients !---------------------- --------------- ---- ------ ------------ Temperature:Primary 'deg C (ITS90)' 10 -99 () (-0.2 1) Conductivity:Primary S/m 10 -99 () (0.3E-01 1) Fluorescence mg/m^3 10 -99 () (-0.68E-01 16.62) $END !----1----- ---2---- ----3----- ---4---- ---5---- ---6--- ----7---- ----8----- ! Date Time Time Temperat Salinity Fluores Latitude Longitude ! ure: :T0:C0 cence: ! Primary URU: ! Wetlabs !---------- -------- ---------- -------- -------- ------- --------- ---------- *END OF HEADER 2005/02/19 16:20:30 50.680904 7.3601 32.5525 3.671 47.76592 -146.45966 2005/02/19 16:21:00 50.681252 7.3586 32.5711 3.389 47.76504 -146.45869 2005/02/19 16:21:30 50.681599 7.3594 32.5783 3.588 47.76406 -146.45778 2005/02/19 16:22:00 50.681946 7.3554 32.5706 3.671 47.76308 -146.45688 2005/02/19 16:22:30 50.682293 7.3563 32.5721 3.588 47.76210 -146.45593 2005/02/19 16:23:00 50.682640 7.3554 32.5660 3.472 47.76108 -146.45499 2005/02/19 16:23:30 50.682987 7.3508 32.5601 3.472 47.76018 -146.45403 2005/02/19 16:24:00 50.683334 7.3523 32.5689 3.422 47.75924 -146.45306 2005/02/19 16:24:30 50.683681 7.3523 32.5735 3.489 47.75828 -146.45216 2005/02/19 16:25:00 50.684029 7.3484 32.5795 3.489 47.75742 -146.45122 2005/02/19 16:25:30 50.684376 7.3469 32.5752 3.588 47.75650 -146.45033 2005/02/19 16:26:00 50.684723 7.3469 32.5695 3.572 47.75554 -146.44942 2005/02/19 16:26:30 50.685070 7.3437 32.5781 3.605 47.75452 -146.44849