*2013/12/16 15:30:37.94 *IOS HEADER VERSION 1.10 2011/10/26 2011/10/26 *FILE START TIME : UTC 2004/06/14 14:57:48.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 45 DATA DESCRIPTION : CTD FILE TYPE : ASCII NUMBER OF CHANNELS : 6 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ----------------------- --------------- -------------- -------------- 1 Pressure decibar 5.4 48.8 2 Temperature:Primary 'deg C (ITS90)' 8.8035 11.5951 3 Transmissivity %/metre 15.3 41 4 Fluorescence:URU mg/m^3 0.459 9.496 5 Salinity:T0:C0 PSS-78 31.3375 32.3373 6 Number_of_bin_records n/a 13 57 $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 7 F ' ' 1 2 -99 ' ' 9 F ' ' 4 3 -99 ' ' 6 F ' ' 1 4 -99 ' ' 8 F ' ' 3 5 -99 ' ' 9 F ' ' 4 6 ' ' ' ' 5 I I 0 $END $REMARKS This file converted from Sea-Bird file: Q:\Cruise_Data\2004-17\CTD\derive\200 $END *ADMINISTRATION MISSION : 2004-17 AGENCY : PBS, Ocean Science and Productivity, Nanaimo, B.C. COUNTRY : Canada PROJECT : High Seas Salmon SCIENTIST : Trudel M. PLATFORM : W.E. Ricker *LOCATION GEOGRAPHIC AREA : N. W. Pacific STATION : EP 01 EVENT NUMBER : 21 LATITUDE : 49 20.38000 N ! (deg min) LONGITUDE : 126 33.28000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0506 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2668 conductivity:primary ' ' 2424 pressure ' ' 69698 temperature:secondary ' ' 2374 conductivity:secondary ' ' 2399 Fluorometer ' ' Seapoint transmissometer:primary ' ' 197 $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.27C $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.8 2004/09/19 16:16:58 5499 5499 CLEAN 4.7 2004/09/19 16:21:04 5479 5479 SHIFTDAT 3.4 2004/09/19 16:27:25 5479 5479 SHIFTDAT 3.4 2004/09/19 16:33:31 5479 5479 DELETE 6.3 2004/09/20 08:40:16 5479 1206 CTDEDIT 4.50 2004/09/20 14:35:07 1206 1031 FILTERS 4.3 2004/09/21 15:44:05 1031 1031 BINAVE 4.0.1 2004/09/21 15:47:01 1031 45 REMOVECH 6.0 2004/09/21 16:03:51 45 45 HDREDIT2 2.2 2004/09/21 16:09:21 ? ? CALIB 11.4 2004/12/22 12:41:51 45 45 CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:30:37 45 45 $END $REMARKS -CLEAN functions: Interpolation by Record Number, in Pressure Set event to last 4 characters of file name -The following SHIFT parameters were used. Shift Channel: Fluorescence:Seapoint # of Records to Advance (-ve for Delay): At REC# 0 Shift= 24.00 -The following SHIFT parameters were used. Shift Channel: Conductivity:Primary # of Records to Advance (-ve for Delay): At REC# 0 Shift= -1.20 Salinity was recalculated after shift -The following DELETE parameters were used: Surface Record Removal: Low Sal & Last Press Min Maximum Surface Pressure (relative): 10.00 Minimum Surface Salinity: 5.000 Surface Swell Pressure Tolerance: 1.00 Pressure filtered over width: 15 Swells deleted. Warning message if pressure difference of 2.00 Drop rates < 0.30m/s (calculated over 11 points) will be deleted. Drop rate applies in the range 10.00 to 39.55 dbars Sample interval (from FILE section of header) = 0.042 seconds. -The following FILTER parameters were used. Median filter was used. Filter width = 11 The following channel(s) were filtered. Fluorescence:Seapoint -The following BINAVE parameters were used: Bin channel = Pressure Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following CHANNEL(S) were removed from file. Scan_Number Temperature:Secondary Conductivity:Primary Conductivity:Secondary Status:Pump Descent_Rate Salinity:T1:C1 Flag -HEADER EDITS: Applied edit header: Q:\Cruise_Data\2004-17\CTD\doc\2004-17-HEADER.TXT Channel 1: Pressure [decibar] Units ==> dbars Format: F10.3 ==> F7.1 Channel 2: Temperature:Primary [deg C (ITS90)] (no changes) Channel 3: Transmissivity [%/metre] (no changes) Channel 4: Fluorescence:Seapoint [mg/m^3] Name ==> Fluorescence:URU Channel 5: Salinity:T0:C0 [PSS-78] (no changes) Channel 6: Number_of_bin_records [n/a] Format: F5.0 ==> I5 -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\RICKER recal\2004-03\2004-17-RECAL2.CCF Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Salinity:T0:C0 PSS-78 10 0.1300000E-01 0.1000000E+01 $END *COMMENTS SBE HEADER Sea-Bird SBE 9 Data File: FileName = D:\CTD Data\2004-17\2004-17-0021.dat Software Version Seasave Win32 V 5.27c Temperature SN = 2668 Conductivity SN = 2424 Number of Bytes Per Scan = 24 Number of Voltage Words = 2 Number of Scans Averaged by the Deck Unit = 1 System UpLoad Time = Jun 14 1982 14:54:13 NMEA Latitude = 49 20.38 N NMEA Longitude = 126 33.28 W NMEA UTC (Time) = Jun 14 2004 14:57:48 Store Lat/Lon Data = Add to Header Only Ship: W.E Ricker Cruise: 2004-17 Station: EP 01 Latitude: Longitude: Depth: CTD Cast #: # nquan = 13 # nvalues = 5499 # units = specified # name 0 = scan: Scan Count # name 1 = prDM: Pressure, Digiquartz [db] # name 2 = t090C: Temperature [ITS-90, deg C] # name 3 = t190C: Temperature, 2 [ITS-90, deg C] # name 4 = c0S/m: Conductivity [S/m] # name 5 = c1S/m: Conductivity, 2 [S/m] # name 6 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%] # name 7 = flSP: Fluorescence, Seapoint # name 8 = pumps: Pump Status # name 9 = dz/dtM: Descent Rate [m/s] # name 10 = sal00: Salinity [PSU] # name 11 = sal11: Salinity, 2 [PSU] # name 12 = flag: flag # span 0 = 1, 5499 # span 1 = 2.896, 49.546 # span 2 = 8.7857, 11.5976 # span 3 = 8.7776, 11.5971 # span 4 = 3.442429, 3.613673 # span 5 = 3.441075, 3.614216 # span 6 = 62.3776, 80.6275 # span 7 = 2.7473e-01, 1.0348e+01 # span 8 = 0, 1 # span 9 = -1.367, 1.622 # span 10 = 30.7597, 32.3332 # span 11 = 30.9258, 32.3291 # span 12 = 0.0000e+00, 0.0000e+00 # interval = seconds: 0.0416667 # start_time = Jun 14 1982 14:54:13 # bad_flag = -9.990e-29 # sensor 0 = Frequency 0 temperature, primary, 2668, 20-Jun-02s # sensor 1 = Frequency 1 conductivity, primary, 2424, 16-Apr-02, cpcor = -9.57 00e-08 # sensor 2 = Frequency 2 pressure, 69698, 12-11-1997 # sensor 3 = Frequency 3 temperature, secondary, 2374, 20-Jun-02 # sensor 4 = Frequency 4 conductivity, secondary, 2399, 16-Apr-02, cpcor = -9. 5700e-08 # sensor 5 = Extrnl Volt 0 Fluorometer, Seapoint, primary # sensor 6 = Extrnl Volt 2 transmissometer, primary, 197, 16-Jan-2004 # datcnv_date = Sep 19 2004 13:18:36, 5.30a # datcnv_in = Q:\Cruise_Data\2004-17\CTD\2004-17-0021.dat Q:\Cruise_Data\2004-17 \CTD\2004-17-ctd.CON # datcnv_skipover = 0 # wildedit_date = Sep 19 2004 13:59:03, 5.30a # wildedit_in = Q:\Cruise_Data\2004-17\CTD\convert\2004-17-0021.cnv # wildedit_pass1_nstd = 2.0 # wildedit_pass2_nstd = 5.0 # wildedit_pass2_mindelta = 0.000e+000 # wildedit_npoint = 50 # wildedit_vars = prDM t090C t190C # wildedit_excl_bad_scans = yes # celltm_date = Sep 19 2004 14:50:42, 5.30a # celltm_in = Q:\Cruise_Data\2004-17\CTD\wildedit\2004-17-0021.cnv # celltm_alpha = 0.0100, 0.0300 # celltm_tau = 9.0000, 7.0000 # celltm_temp_sensor_use_for_cond = primary, secondary # Derive_date = Sep 19 2004 14:53:28, 5.30a # Derive_in = Q:\Cruise_Data\2004-17\CTD\celltm\2004-17-0021.cnv Q:\Cruise_Data\ 2004-17\CTD\2004-17-ctd.CON # file_type = ascii END* The descent rate was extremely noisy for this cast. CTDEDIT was used to remove surface records to 4db and many records corrupted by shed wakes; salinity was cleaned. Transmissivity and Fluorescence: The data are nominal and unedited, except that some records were removed in editing T and S. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------- -------- ---- ------ ------------ Salinity:T0:C0 PSS-78 10 -99 () (0.13E-01 1) $END !--1--- ---2---- --3-- ---4--- ---5---- -6-- !Pressu Temperat Trans Fluores Salinity Numb !re ure: missi cence: :T0:C0 er_o ! Primary vity URU ~bin ! _rec ! ords !------ -------- ----- ------- -------- ---- *END OF HEADER 5.4 11.5951 28.9 0.751 31.3375 13 5.9 11.5951 28.7 0.880 31.3378 26 7.0 11.5793 28.4 1.550 31.3756 18 8.0 11.4844 27.4 2.026 31.4074 27 9.0 11.4490 26.5 1.932 31.4169 34 9.9 11.4436 26.6 2.415 31.4301 20 11.0 11.4744 25.6 5.354 31.5148 17 12.0 11.4699 21.6 6.808 31.6752 19 13.0 11.4207 18.7 8.220 31.7495 34 14.0 11.3993 16.4 9.496 31.7633 16 15.0 11.3970 15.3 9.417 31.7698 15 16.0 11.3950 15.4 8.341 31.7726 15 17.0 11.3493 15.9 7.829 31.7839 20 18.0 11.3037 17.1 7.810 31.7962 38 19.0 11.2663 19.0 7.188 31.8038 27 20.0 11.1646 20.1 7.615 31.8220 29 20.9 11.0686 21.9 6.793 31.8376 39 21.9 10.7828 24.4 5.061 31.8716 21 23.1 10.4445 28.5 4.391 31.9263 21 24.0 10.4226 30.2 3.837 31.9333 32 25.0 10.4229 31.0 3.643 31.9426 31 26.0 10.3048 31.7 3.466 31.9887 20 27.0 10.2092 31.9 3.785 32.0197 15 28.0 10.1107 31.7 3.570 32.0478 15 28.8 9.9221 31.9 3.783 32.0706 16 30.1 9.7862 33.1 3.157 32.0735 16 31.0 9.7397 33.1 3.191 32.0808 16 32.0 9.7060 33.5 2.811 32.0844 15 33.1 9.6708 33.5 2.742 32.0838 21 33.9 9.6489 34.6 2.775 32.0863 27 34.9 9.5686 35.0 2.262 32.0982 30 36.0 9.5358 35.3 2.243 32.1032 19 37.0 9.4172 35.5 1.897 32.1231 16 38.0 9.3142 36.6 1.491 32.1499 17 39.1 9.1706 37.5 1.148 32.1968 29 40.0 9.0329 37.9 0.876 32.2431 57 40.9 8.9354 39.7 0.641 32.2729 47 42.0 8.9109 40.7 0.528 32.2807 23 43.0 8.9069 41.0 0.560 32.2821 16 43.9 8.8962 41.0 0.481 32.2862 14 45.0 8.8944 40.9 0.559 32.2878 13 46.0 8.8907 41.0 0.576 32.2896 19 47.0 8.8809 40.8 0.459 32.2966 18 48.0 8.8294 40.1 0.465 32.3253 24 48.8 8.8035 39.2 0.491 32.3373 16