*2024/04/15 14:55:02.03 *IOS HEADER VERSION 2.0 2016/04/28 2016/06/13 IVF16 *FILE START TIME : UTC 2004/06/05 05:58:02.000 TIME INCREMENT : 0 0 0 0.416667E-01 0 ! (day hr min sec ms) NUMBER OF RECORDS : 17 DATA DESCRIPTION : Bottle:Rosette:Up:Stop + CTD:Up FILE TYPE : ASCII NUMBER OF CHANNELS : 19 $TABLE: CHANNELS ! No Name Units Minimum Maximum !--- ---------------------------- --------------- -------------- -------------- 1 Sample_Number n/a 116 132 2 Pressure decibar 1.5 203.2 3 Temperature:Primary 'deg C (ITS90)' 5.5957 10.3315 4 Transmissivity %/metre 42.9 60.5 5 Oxygen:Dissolved:SBE mL/L 3.57 7.25 6 Fluorescence:URU:Seapoint mg/m^3 0.132 2.496 7 Bottle_Number n/a 1 18 8 Salinity:T0:C0 PSS-78 32.3394 33.8113 9 Number_of_bin_records n/a 70 121 10 Nitrate_plus_Nitrite umol/L 7.1 29.8 11 Flag:Nitrate_plus_Nitrite n/a 12 Silicate umol/L 10.1 52.5 13 Flag:Silicate n/a 14 Phosphate umol/L 0.92 2.15 15 Flag:Phosphate n/a 16 Chlorophyll:Extracted mg/m^3 0.13 0.52 17 Flag:Chlorophyll:Extracted n/a 18 Dimethyl_Sulphide nmol/L 0 2.09 19 Flag:Dimethyl_Sulphide n/a $END $TABLE: CHANNEL DETAIL ! No Pad Start Width Format Type Decimal_Places !--- ---- ----- ----- ------ ---- -------------- 1 -99 ' ' 5 I I 0 2 -99 ' ' 7 F ' ' 1 3 -99 ' ' 9 F ' ' 4 4 -99 ' ' 6 F ' ' 1 5 -99 ' ' 7 F ' ' 2 6 -99 ' ' 8 F ' ' 3 7 -99 ' ' 3 I I 0 8 -99 ' ' 9 F ' ' 4 9 -99 ' ' 5 I I 0 10 -99 ' ' 6 F R4 1 11 -99 ' ' 2 NQ C ' ' 12 -99 ' ' 6 F R4 1 13 -99 ' ' 2 NQ C ' ' 14 -99 ' ' 7 F R4 2 15 -99 ' ' 2 NQ C ' ' 16 -99 ' ' 7 F R4 2 17 -99 ' ' 2 NQ C ' ' 18 -99 ' ' ' ' F7.2 R4 ' ' 19 -99 ' ' 2 NQ C ' ' $END $REMARKS Flag channels initialized with zeros. Non-zero values have the following significance: -------------------------------------------------------------------------------------- 1 = Sample for this measurement was drawn from water bottle but not analyzed (not normally used). 2 = Acceptable measurement (not normally used). 3 = Questionable measurement (no problem observed in sampling or analysis, but value is not trusted, nonetheless; includes outlyers). 4 = Bad measurement (known problem with sampling or analysis, but not serious enough to completely discard the value). 5 = Not reported (lost sample; unredeemably bad measurement). 6 = Mean of replicate measurements. 7 = Manual chromatographic peak measurement. 8 = Irregular digital chromatographic peak integration. 9 = Sample not drawn for this measurement from this bottle (not normally used). -------------------------------------------------------------------------------------- $END *ADMINISTRATION MISSION : 2004-10 AGENCY : IOS, Ocean Science and Productivity, Sidney, B.C. COUNTRY : Canada PROJECT : Line P SCIENTIST : Robert M. PLATFORM : John P. Tully *LOCATION GEOGRAPHIC AREA : N.E. Pacific STATION : P16 EVENT NUMBER : 24 LATITUDE : 49 17.09000 N ! (deg min) LONGITUDE : 134 40.15000 W ! (deg min) *INSTRUMENT TYPE : Sea-Bird CTD MODEL : SBE-911plus SERIAL NUMBER : 0585 $TABLE: SENSORS ! Name Abs Depth Serial No ! ------------------------- -------------- ---------- temperature:primary ' ' 2023 conductivity:primary ' ' 1763 pressure ' ' 77511 temperature:secondary ' ' 2095 conductivity:secondary ' ' 1764 Fluorometer ' ' Seapoint Oxygen:SBE ' ' 0047 transmissometer:primary ' ' 333DR irradiance ' ' primary altimeter: ' ' ' ' $END $REMARKS SOFTWARE VERSION SEASAVE WIN32 V 5.30A $END *HISTORY $TABLE: PROGRAMS ! Name Vers Date Time Recs In Recs Out ! ------------------------ ------ ---------- -------- --------- --------- SBE_IOS 2.7 2004/08/02 13:51:03 2082 2082 CLEAN 4.7 2004/08/02 13:52:28 ? ? ADDSAMP 3.4 2004/08/04 17:32:09 2082 2082 BINAVE 4.0.1 2004/08/04 17:34:16 2082 18 MERGE 3.1 2004/08/05 08:47:51 17 17 MERGE 3.1 2004/08/05 08:56:19 17 17 CALIB 11.4 2004/08/13 14:37:13 17 17 CLEAN 4.7 2004/08/17 12:47:04 ? ? SORT 3.4.1 2004/08/17 12:49:25 17 17 REMOVECH 6.0 2004/08/17 12:53:53 17 17 HDREDIT2 2.2 2004/08/17 13:01:52 ? ? CALIB 11.4 2004/09/29 14:45:40 17 17 SORT 3.5 2004/11/03 15:51:06 17 17 MERGE 3.3 2004/11/03 15:51:50 17 17 SORT 3.5 2004/11/03 16:00:22 17 17 REMOVECH 6.0 2004/11/29 17:20:01 17 17 HDREDIT2 2.3 2004/12/07 14:37:51 ? ? REMOVECH 6.0 2005/02/04 11:29:31 17 17 CALIB 11.6 2005/10/12 13:52:14 17 17 CHANGE_FLAGS 1.0 2013/07/29 14:29:40 17 17 SORT 3.6 2013/10/28 15:59:38 17 17 MERGE 3.5 2013/10/28 16:00:00 17 17 SORT 3.6 2013/10/28 16:02:19 17 17 HDREDIT2 2.6 2013/10/28 16:02:30 ? ? CHANGE_CTD_CHANNEL_NAMES 1.0 2013/12/16 15:30:15 17 17 CHANGE_FLAGS 2.0 2014/11/20 09:54:17 17 17 CLEAN 5.3 2024/04/15 14:49:32 17 17 CLEAN 5.3 2024/04/15 14:49:49 17 17 CLEAN 5.3 2024/04/15 14:52:36 17 17 HDREDIT2 3.2 2024/04/15 14:55:02 ? ? $END $REMARKS -CLEAN functions: Set event to last 4 characters of file name -The following ADDSAMP parameters were used: Sample Number Lookup File: Q:\Cruise_Data\2004-10\CTD files\hydro\addsamp.csv Bottle Channel Name: Bottle_Number -The following BINAVE parameters were used: Bin channel = Bottle_Number Averaging interval = 1.00 Minimum bin value = 0.000 Average value was used Interpolated values were NOT used for empty bins Channel 'NUMBER_OF_BIN_RECORDS' was added to file. -The following MERGE parameters were used: Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Salinity:Bottle, Flag:Salinity:Bottle Primary file : Q:\Cruise_Data\2004-10\CTD files\hydro\2004-10-0024.samavg Secondary file: Q:\Cruise_Data\2004-10\CTD files\hydro\2004-10-0024.sal -MERGE *** Secondary file not found *** Primary file : Q:\Cruise_Data\2004-10\CTD files\hydro\2004-10-0024.mrg1 Secondary file: Q:\Cruise_Data\2004-10\CTD files\hydro\2004-10-0024.add -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2004-10\CTD files\doc\2004-10-recal1.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 9 Oxygen:Dissolved:SBE mL/L 10 0.3310000E-01 0.1077200E+01 17 Salinity:T0:C0 PSS-78 10 0.1000000E-02 0.1000000E+01 -CLEAN functions: Remove Sea-Bird comments from the header. -The following SORT parameters were used. Sorted by channel: Pressure Pressure channel sorted according to values in sort channel -The following CHANNEL(S) were removed from file. Scan_Number Temperature:Secondary Conductivity:Primary Conductivity:Secondary Oxygen:Voltage:SBE Status:Pump Altimeter Descent_Rate Salinity:T1:C1 Flag -HEADER EDITS: Applied edit header: O:\Data Processing\Header Comments\sal_oxy_chl_fresh_nut_a Channel 1: Sample_Number [n/a] Pad: -9 ==> -99 Channel 2: Pressure [decibar] Units ==> dbars Format: F10.3 ==> F7.1 Channel 3: Temperature:Primary [deg C (ITS90)] (no changes) Channel 4: Transmissivity [%/metre] (no changes) Channel 5: Oxygen:Dissolved:SBE [mL/L] Format: F8.3 ==> F7.2 Channel 6: PAR [uE/m^2/sec] Format: F11.3 ==> F7.1 Channel 7: Fluorescence:URU:Seapoint [mg/m^3] (no changes) Channel 8: Bottle_Number [n/a] (no changes) Channel 9: Salinity:T0:C0 [PSS-78] (no changes) Channel 10: Number_of_bin_records [n/a] Format: F5.0 ==> I5 Channel 11: Salinity:Bottle [] Units ==> PSS-78 Channel 12: Flag:Salinity:Bottle [] Units ==> n/a Pad: 0 ==> blank -The following CALIB parameters were used: Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = Q:\Cruise_Data\2004-10\DOC new\2004-10-recal3.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 9 Salinity:T0:C0 PSS-78 10 0.5000000E-03 0.1000000E+01 -SORT parameters: 2004/11/03 15:51:06 Sorted in descending order of channel Sample_Number -The following MERGE parameters were used: 2004/11/03 15:51:50 2004/11/03 15:51: Merge Channel: Sample_Number Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Nitrate_plus_Nitrite, Flag:Nitrate_plus_Nitrite, Silicate, Flag:Silicate, Phosphate, Flag:Phosphate, Chlorophyll:Extracted, Flag:Chlorophyll:Extracted Primary file : H:\Data Processing\2004\2004-10\2004-10-0024.srt_che Secondary file: H:\Data Processing\2004\2004-10\2004-10-0024.mrg Comments from secondary file: H:\Data Processing\2004\2004-10\2004-10-0024.mrg ------------------------------------------------ -The following MERGE parameters were used: 2004/11/03 14:59:15 2004/11/03 14:59: Merge Channel: Sample_Number Merge Scheme Used: Interweave Records from Both Files Overlap Scheme Used: Keep Primary Primary Channels to Include: ALL Secondary Channels to Include: Chlorophyll:Extracted, Flag:Chlorophyll:Extracted Primary file : H:\Data Processing\2004\2004-10\2004-10-0024.nut Secondary file: H:\Data Processing\2004\2004-10\2004-10-0024.chl -SORT parameters: 2004/11/03 16:00:22 Sorted in ascending order of channel Pressure -The following CHANNEL(S) were removed from file. Salinity:Bottle Flag:Salinity:Bottle -HEADER EDITS: 2004/12/07 14:37:51 Applied edit header: H:\STNPCHEM\Work\HEADERS\Geographic Area.txt -The following CHANNEL(S) were removed from file. PAR -CALIB parameters: 2005/10/12 13:52:14 Calibration type = Correct Mode: ONLY - calibration specs from Cal File only. Calibration file = C:\DATA\repair shop\2004-10\2004-10-recal3.ccf Calibrations applied: Ch Name Units Fmla Coefficents -- ----------------------------- --------- --- ----------------------------- 5 Oxygen:Dissolved:SBE mL/L 10 0.0000000E+00 0.1005000E+01 -SORT parameters: 2013/10/28 15:59:38 Sorted in ascending order of channel Sample_Number -The following MERGE parameters were used: 2013/10/28 16:00:00 Merge Channel: Sample_Number Merge Scheme Used: Add Secondary to Primary Overlap Scheme Used: Keep Secondary Primary Channels to Include: ALL Secondary Channels to Include: Dimethyl_Sulphide, Flag:Dimethyl_Sulphide Primary file : P:\John Pages Archive\2004-10\DMS\2004-10-0024.srt_che Secondary file: P:\John Pages Archive\2004-10\DMS\2004-10-0024.ios -SORT parameters: 2013/10/28 16:02:19 Sorted in ascending order of channel Pressure -HEADER EDITS: 2013/10/28 16:02:30 Applied edit header: P:\John Pages Archive\DMS_Methods post 1999.txt -CLEAN functions: 2024/04/15 14:49:32 20 Reset #RECS, MIN & MAX values in header. Change Pad Value to -99 in All Channels. Set header Start and End times from the data. *FAILED* -CLEAN functions: 2024/04/15 14:49:49 20 Reset #RECS, MIN & MAX values in header. Change Pad Value to -99 in All Channels. Set header Start and End times from the data. *FAILED* -CLEAN functions: 2024/04/15 14:52:35 20 Reset #RECS, MIN & MAX values in header. Change Pad Value to -99 in All Channels. Set header Start and End times from the data. *FAILED* -HEADER EDITS: 2024/04/15 14:55:02 - none. $END *COMMENTS Analysis methods: ----------------- Salinity samples are collected in glass bottles and analyzed on Guildline model 8410 Portasal Salinometers which are standardized with IAPSO standard seawater. Oxygen samples are analyzed on an automated Winkler titration system following the procedures of Carpenter (1965). A Brinkmann model 665 Dosimat and model PC910 Colorimeter is controlled by Visual-Basic program to titrate the oxygen samples. Nutrient samples are analyzed fresh on board using a Technicon AAII auto- analyzer following methods described in Barwell-Clarke and Whitney (1996). Chlorophyll samples are collected in duplicate in calibrated polycarbonate bottles (~330ml), then filtered onto 25mm MFS GF/75 filters at <70mmHg vacuum. The filters are placed in glass scintillation vials and immediately frozen at -20ºC until analysis. The chlorophyll is extracted in 10 ml of 90% acetone for 24h at -20ºC, then brought to room temperature and the extract is decanted and measured using a Turner Designs 10-AU-005-CE fluorometer, which has been calibrated with solutions of commercially prepared chlorophyll. For DMS methods see file "Method post 1999 for Dimethylsulfide Analysis.docx" in directory \\OSD_Data_Archive\Cruise_Data\Documents\Analysis Reference Papers\. The minimum detectable level for DMS is 0.10 nM, so “0” values should be interpreted as <0.10. . References: 1. Carpenter, J.H. 1965. The Chesapeake Bay Institute Technique for the Winkler Dissolved Oxygen Method. Limmnol. & Oceanogr., 10: 141-143. 2. J. Barwell-Clarke and F. Whitney. 1996. Institute of Ocean Sciences Nutrient Methods and Analysis. Canadian Technical Report of Hydrography and Ocean Sciences, No. 182, 43 pp. *CALIBRATION $TABLE: CORRECTED CHANNELS ! Name Units Fmla Pad Coefficients ! ---------------------- -------- ---- ------ ------------ Oxygen:Dissolved:SBE mL/L 10 -99 () (0.331E-01 1.0772) Salinity:T0:C0 PSS-78 10 -99 () (0.1E-02 1) Salinity:T0:C0 PSS-78 10 -99 () (0.5E-03 1) Oxygen:Dissolved:SBE mL/L 10 -99 () (0 1.005) $END !-1-- --2--- ---3---- --4-- --5--- ---6--- 7- ---8---- -9-- --10- - --12- - --14-- - --16-- - --18-- - !Samp Pressu Temperat Trans Oxygen Fluores Bo Salinity Numb Nitra F Silic F Phosph F Chloro F Dimeth F !le_ re ure: missi : cence: tt :T0:C0 er_o te_ l ate l ate l phyll: l yl_ l !Numb Primary vity Dissol URU: ~u ~bin plus_ ~ ~ ~ Extrac ~ Sulphi ~ !er ved: Seapoin mb _rec Nitri t t t ted e de d ! SBE t er ords te e e e d e !---- ------ -------- ----- ------ ------- -- -------- ---- ----- - ----- - ------ - ------ - ------ - *END OF HEADER 132 1.5 10.3315 42.9 6.77 1.291 18 32.3399 120 7.2 0 10.3 0 0.93 0 0.33 0 2.05 0 131 6.9 10.3118 52.6 6.79 1.701 17 32.3394 121 7.1 0 10.3 0 0.92 0 0.32 0 1.96 0 129 15.8 10.2663 52.6 6.81 1.327 14 32.3467 121 7.1 0 10.5 0 0.93 0 0.36 0 2.07 0 130 15.8 10.2575 52.5 6.81 1.415 15 32.3478 121 7.2 0 10.3 0 0.92 0 0.34 0 2.08 0 128 20.3 10.1762 52.3 6.83 1.498 13 32.3535 121 7.1 0 10.3 0 0.93 0 0.36 0 2.09 6 124 23.9 10.1573 52.2 6.83 1.551 9 32.3544 70 -99.0 0 -99.0 0 -99.00 0 -99.00 0 -99.00 0 123 24.7 10.1575 52.2 6.83 1.517 8 32.3544 120 7.2 0 10.5 0 0.93 0 0.38 0 1.99 0 126 25.1 10.1560 52.2 6.83 1.575 11 32.3544 120 -99.0 0 -99.0 0 -99.00 0 -99.00 0 -99.00 0 125 25.4 10.1564 52.2 6.83 1.512 10 32.3544 77 -99.0 0 -99.0 0 -99.00 0 -99.00 0 -99.00 0 127 26.2 10.1541 52.2 6.83 1.541 12 32.3544 121 -99.0 0 -99.0 0 -99.00 0 -99.00 0 -99.00 0 122 30.7 10.1249 52.3 6.83 1.592 7 32.3550 121 7.1 0 10.1 0 0.93 0 0.39 0 1.74 0 121 40.3 9.1910 51.8 7.07 2.274 6 32.3704 121 7.4 0 10.5 0 0.93 0 0.45 0 1.57 0 120 51.2 7.8593 53.1 7.25 2.496 5 32.3888 121 7.8 0 10.6 0 0.96 0 0.52 0 0.74 0 119 75.9 7.1018 58.8 6.87 0.811 4 32.4288 121 10.1 0 12.7 0 1.17 0 0.36 0 -99.00 0 118 101.2 6.5271 59.9 6.01 0.380 3 32.8829 121 16.6 0 20.9 0 1.57 0 0.13 0 0.00 0 117 176.3 5.6001 60.5 3.99 0.132 2 33.7568 121 28.1 0 47.3 0 2.06 0 -99.00 0 0.00 0 116 203.2 5.5957 60.5 3.57 0.132 1 33.8113 121 29.8 0 52.5 0 2.15 0 -99.00 0 0.00 0